一个奇怪的注意事项TNS-12545 TNS-12560 TNS-00515
近来的reportDB无法从一开始就与系统收听，比较奇怪的现象。
由于server有听众的一个实例上正常启动，这是不是从开始监听器的实例手动启动是正常的。所以写下来未能找到离奇写的原因。
1、故障现象
Starting CRON daemondone Oracle 10g auto start/stop Startup "USMTHLY" listener. LSNRCTL for Linux: Version 10.2.0.3.0 - Production on 08-JUL-2014 17:05:49 Copyright (c) 1991, 2006, Oracle. All rights reserved. Starting /users/oracle/OraHome10g/bin/tnslsnr: please wait... TNSLSNR for Linux: Version 10.2.0.3.0 - Production System parameter file is /users/oracle/OraHome10g/network/admin/listener.ora Log messages written to /users/oracle/OraHome10g/network/log/listener_usmthly.log Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.101.1.106)(PORT=1520))) TNS-12545: Connect failed because target host or object does not exist TNS-12560: TNS:protocol adapter error TNS-00515: Connect failed because target host or object does not exist Linux Error: 99: Cannot assign requested address #上面的错误信息了来自系统启动日志。相同出如今该实例的监听器日志里。 #故障环境 oracle@sysreportDB:/users/oracle> cat /etc/issue Welcome to SUSE Linux Enterprise Server 10 SP4 (x86_64) - Kernel \r (\l). oracle@sysreportDB:/users/oracle> sqlplus -v SQL*Plus: Release 10.2.0.3.0 - Production #server启动后。检查数据库实例，2个实例都已成功启动 oracle@sysreportDB:~> ps -ef | grep pmon | grep -v grep oracle 4916 1 0 Jul08 ? 00:00:00 ora_pmon_USMTHLY oracle 5605 1 0 Jul08 ? 00:00:00 ora_pmon_USBO2 oracle@sysreportDB:~> ps -ef | grep lsnr| grep -v grep #只唯独usbo2的监听被启动 oracle 5597 1 0 Jul09 ? 00:00:00 /users/oracle/OraHome10g/bin/tnslsnr listener_USBO2 -inherit
2、故障分析
oracle@sysreportDB:~> oerr tns 12545
12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.
oracle@sysreportDB:~> oerr tns 12560
12560, 00000, "TNS:protocol adapter error"
// *Cause: A generic protocol adapter error occurred.
// *Action: Check addresses used for proper protocol specification. Before
// reporting this error, look at the error stack and check for lower level
// transport errors. For further details, turn on tracing and reexecute the
// operation. Turn off tracing when the operation is complete.
oracle@sysreportDB:~> oerr tns 00515
00515, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
#上面的三个错误号描写叙述信息表明该故障与主机名或IP地址有关，须要检查是否为有效的IP或主机名
#以下查看监听器及TNSNAMES的配置
oracle@sysreportDB:/users/oracle/OraHome10g/network/admin> more listener.ora
SID_LIST_LISTENER_USMTHLY =
(SID_LIST =
(SID_DESC =
(sid_name=USMTHLY)
(oracle_home = /users/oracle/OraHome10g)
)
)
LISTENER_USMTHLY =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.101.1.106)(PORT = 1520))
)
)
)
SID_LIST_LISTENER_USBO2 =
(SID_LIST =
(SID_DESC =
(sid_name=USBO2)
(oracle_home = /users/oracle/OraHome10g)
)
)
LISTENER_USBO2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.101.1.106)(PORT = 1504))
)
)
)
oracle@sysreportDB:/users/oracle/OraHome10g/network/admin> more tnsnames.ora
USMTHLY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.101.1.106)
(PORT=1520)
)
(CONNECT_DATA=
(SERVICE_NAME=USMTHLY)
)
)
USBO2=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.101.1.106)
(PORT=1504)
)
(CONNECT_DATA=
(SERVICE_NAME=USBO2)
)
)
#从上面的配置来看，配置无异常。
#以下查看本机host及IP信息，从以下的描写叙述来看，主机host配置无异常
oracle@sysreportDB:~> more /etc/hosts
127.0.0.1 localhost
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
10.101.1.106 sysreportDB.2goasp.com sysreportDB
oracle@sysreportDB:~> hostname
sysreportDB
# Author : Leshami
# Blog : http://blog.csdn.net/leshami
#以下是其IP信息
oracle@sysreportDB:/var/log> ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:70:82:63
inet addr:10.101.1.106 Bcast:10.201.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5763651 errors:0 dropped:0 overruns:0 frame:0
TX packets:802254 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8102327746 (7726.9 Mb) TX bytes:88597013 (84.4 Mb)
lo Link encap:Local Loopback #有环路能正常TX,RX
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:92972 errors:0 dropped:0 overruns:0 frame:0
TX packets:92972 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4993723 (4.7 Mb) TX bytes:4993723 (4.7 Mb)
#尝试手动启动监听，手动启动监听无异常
oracle@sysreportDB:/var/log> lsnrctl start listener_USMTHLY
LSNRCTL for Linux: Version 10.2.0.3.0 - Production on 08-JUL-2014 17:10:49
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Starting /users/oracle/OraHome10g/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.3.0 - Production
System parameter file is /users/oracle/OraHome10g/network/admin/listener.ora
Log messages written to /users/oracle/OraHome10g/network/log/listener_usmthly.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sysreportDB.2goasp.com)(PORT=1520)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sysreportDB.2goasp.com)(PORT=1520)))
STATUS of the LISTENER
------------------------
Alias listener_USMTHLY
Version TNSLSNR for Linux: Version 10.2.0.3.0 - Production
Start Date 08-JUL-2014 17:10:50
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /users/oracle/OraHome10g/network/admin/listener.ora
Listener Log File /users/oracle/OraHome10g/network/log/listener_usmthly.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sysreportDB.2goasp.com)(PORT=1520)))
Services Summary...
Service "USMTHLY" has 1 instance(s).
Instance "USMTHLY", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
#通过上面的測试可以看出，监听器可以正常启动也就是说监听器的配置应该是OK的。
#另外一点发现，系统启动日志里边有127.0.0.2的环路。不知道怎么会有127.0.0.2
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
oracle@sysreportDB:/var/log> ping 127.0.0.2 #环路127.0.0.2 OK
PING 127.0.0.2 (127.0.0.2) 56(84) bytes of data.
64 bytes from 127.0.0.2: icmp_seq=1 ttl=64 time=0.034 ms
3、故障解决
#对于上面的问题实在是百思不得其解。就差使用sqlnet trace。
#以下尝试将监听器配置文件内IP地址使用主机名来取代，居然成功鸟。
#例如以下2种方式都能够将监听随系统启动而启动。一个是主机名，一个是full主机名
#LISTENER_USMTHLY =
# (DESCRIPTION_LIST =
# (DESCRIPTION =
# (ADDRESS_LIST =
# (ADDRESS = (PROTOCOL = TCP)(HOST = sysreportDB)(PORT = 1520))
# )
# )
# )
LISTENER_USMTHLY =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sysreportDB.2goasp.com)(PORT = 1520))
)
)
)
#高兴之余，查看系统日志，汗，还是有错误，这次的错误是TNS-12543，目标主机不可达。
#怀疑是否hosts文件里是否存在异常字符。于是尝试重建Hosts文件。重建后错误消息依然例如以下。
Starting CRON daemondone
Oracle 10g auto start/stop
Starting Oracle10g: Startup "USMTHLY" listener.
LSNRCTL for Linux: Version 10.2.0.3.0 - Production on 09-JUL-2014 17:15:47
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Starting /users/oracle/OraHome10g/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.3.0 - Production
System parameter file is /users/oracle/OraHome10g/network/admin/listener.ora
Log messages written to /users/oracle/OraHome10g/network/log/listener_usmthly.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sysreportDB.2goasp.com)(PORT=1520)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sysreportDB)(PORT=1520)))
TNS-12543: TNS:destination host unreachable
TNS-12560: TNS:protocol adapter error
TNS-00513: Destination host unreachable
Linux Error: 101: Network is unreachable
#终于。此题临时无解，没有找到原因。不影响自启动而已。
4、小结
a、对于TNS-12545。TNS-00515应首先考虑是否使用了合适的IP。主机名。应检查serverhost文件。网络配置等
b、Step a检查完后应考虑是否正确的配置了监听以及tnsnames
c、对于上述该类错误，应同一时候检查及分析监听器日志
d、对于client出现TNS-12545，TNS-00515等，考虑client是否能将主机转换成相应的IP(clienttnsnames.ora使用主机名的情形时)
e、有关Oracle网络配置相关能够參考：http://blog.csdn.net/leshami/article/category/828434
版权声明：本文博客原创文章，博客，未经同意，不得转载。
