虚拟机部署 Kubernetes v1.10.3 高可用集群 - 04 部署 Node
部署 Node
在开始部署前，先在 kube-m1 将需要用到的文件复制到所有 node 节点上：
$ cd /etc/kubernetes/ssl
$ for NODE in kube-n1 kube-n2 kube-n3; do
echo "--- $NODE ---"
ssh ${NODE} "mkdir -p /etc/kubernetes/ssl/"
ssh ${NODE} "mkdir -p /etc/etcd/ssl"
# Etcd
for FILE in etcd.pem etcd-key.pem; do
scp /etc/etcd/ssl/${FILE} ${NODE}:/etc/etcd/ssl/${FILE}
done
# Kubernetes
for FILE in ssl/ca.pem ssl/ca-key.pem bootstrap-kubelet.conf; do
scp /etc/kubernetes/${FILE} ${NODE}:/etc/kubernetes/${FILE}
done
done
部署与设定
以下所有操作需要在每台 Node 节点上都进行一遍。
在每台 node 节点配置 kubelet.service 相关文件来管理 kubelet：
安装 cni 网络 插件：
$ mkdir -p /opt/cni/bin && cd /opt/cni/bin
$ export CNI_URL="https://github.com/containernetworking/plugins/releases/download"
$ wget -qO- "${CNI_URL}/v0.6.0/cni-plugins-amd64-v0.6.0.tgz" | tar -zx
配置 kubelet.service：
$ cat > /usr/lib/systemd/system/kubelet.service <<EOF
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service
[Service]
Environment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf"
Environment="KUBELET_SYSTEM_PODS_ARGS=--pod-manifest-path=/etc/kubernetes/manifests --allow-privileged=true"
Environment="KUBELET_NETWORK_ARGS=--network-plugin=cni --cni-conf-dir=/etc/cni/net.d --cni-bin-dir=/opt/cni/bin"
Environment="KUBELET_DNS_ARGS=--cluster-dns=10.254.0.2 --cluster-domain=cluster.local"
Environment="KUBELET_AUTHZ_ARGS=--authorization-mode=Webhook --client-ca-file=/etc/kubernetes/ssl/ca.pem"
Environment="KUBELET_CADVISOR_ARGS=--cadvisor-port=0"
Environment="KUBELET_CERTIFICATE_ARGS=--rotate-certificates=true --cert-dir=/var/lib/kubelet/ssl"
Environment="KUBELET_EXTRA_ARGS=--node-labels=node-role.kubernetes.io/node='' --logtostderr=true --v=0 --fail-swap-on=false --cgroup-driver=systemd"
ExecStart=/usr/local/bin//kubelet \$KUBELET_KUBECONFIG_ARGS \$KUBELET_SYSTEM_PODS_ARGS \$KUBELET_NETWORK_ARGS \$KUBELET_DNS_ARGS \$KUBELET_AUTHZ_ARGS \$KUBELET_CADVISOR_ARGS \$KUBELET_CERTIFICATE_ARGS \$KUBELET_EXTRA_ARGS
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target
EOF
最后建立 var 存放信息，然后启动 kubelet 服务:
$ mkdir -p /var/lib/kubelet /var/log/kubernetes
$ systemctl enable kubelet.service && systemctl start kubelet.service
验证集群
在任意 Mater 执行以下命令：
$ kubectl get csr
csr-xtvv5 1h system:node:kube-m1 Approved,Issued
csr-bm696 1h system:node:kube-m2 Approved,Issued
csr-s95db 1h system:node:kube-m3 Approved,Issued
node-csr-7EpNHKBXNxc75nKEbT10qweZ5tPNSVYSW9lHhgXP_io 5m system:bootstrap:c63cdb Approved,Issued
node-csr-MLS26OAthEDtOVKcu9UYoA6sldkUEj49MTv278z-w7o 1m system:bootstrap:c63cdb Approved,Issued
node-csr-rJUWN98SoxqdtTcfToALKB7Whj55wl4WPGcGxLQBIHo 1m system:bootstrap:c63cdb Approved,Issued
$ kubectl get nodes
kube-m1 NotReady master 1h v1.10.3
kube-m2 NotReady master 1h v1.10.3
kube-m3 NotReady master 1h v1.10.3
kube-n1 NotReady node 7m v1.10.3
kube-n2 NotReady node 2m v1.10.3
kube-n3 NotReady node 2m v1.10.3
Kubernetes Core Addons 部署
当完成上面所有步骤后，接着需要部署一些插件，如 Kubernetes DNS 与 Kubernetes Proxy 等。
Kubernetes Proxy
Kube-proxy 是实现 Service 的关键插件，kube-proxy 会在每台节点上执行，然后监听 API Server 的 Service 与 Endpoint 资源物件的改变，然后来依据变化执行 iptables 来实现网络的转发。这边我们会需要建议一个 DaemonSet 来执行，并且建立一些需要的 Certificates。
在 kube-m1 配置 kube-proxy.yml 来安装 Kubernetes Proxy 插件：
$ mkdir /etc/kubernetes/addon && cd /etc/kubernetes/addon
$ cat > /etc/kubernetes/addon/kube-proxy.yml <<EOF
apiVersion: v1
kind: ServiceAccount
metadata:
name: kube-proxy
namespace: kube-system
labels:
addonmanager.kubernetes.io/mode: Reconcile
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: system:kube-proxy
labels:
addonmanager.kubernetes.io/mode: Reconcile
subjects:
- kind: ServiceAccount
name: kube-proxy
namespace: kube-system
roleRef:
kind: ClusterRole
name: system:node-proxier
apiGroup: rbac.authorization.k8s.io
---
apiVersion: v1
kind: ConfigMap
metadata:
labels:
app: kube-proxy
name: kube-proxy
namespace: kube-system
data:
config.conf: |-
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 0.0.0.0
clientConnection:
acceptContentTypes: ""
burst: 10
contentType: application/vnd.kubernetes.protobuf
kubeconfig: /var/lib/kube-proxy/kubeconfig.conf
qps: 5
clusterCIDR: 172.30.0.0/16
configSyncPeriod: 15m0s
conntrack:
max: null
maxPerCore: 32768
min: 131072
tcpCloseWaitTimeout: 1h0m0s
tcpEstablishedTimeout: 24h0m0s
enableProfiling: false
healthzBindAddress: 0.0.0.0:10256
hostnameOverride: ""
iptables:
masqueradeAll: false
masqueradeBit: 14
minSyncPeriod: 0s
syncPeriod: 30s
ipvs:
minSyncPeriod: 0s
scheduler: ""
syncPeriod: 30s
kind: KubeProxyConfiguration
metricsBindAddress: 127.0.0.1:10249
mode: ""
nodePortAddresses: null
oomScoreAdj: -999
portRange: ""
resourceContainer: /kube-proxy
udpIdleTimeout: 250ms
kubeconfig.conf: |-
apiVersion: v1
kind: Config
clusters:
- cluster:
certificate-authority: /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
server: https://192.168.56.10:6443
name: default
contexts:
- context:
cluster: default
namespace: default
user: default
name: default
current-context: default
users:
- name: default
user:
tokenFile: /var/run/secrets/kubernetes.io/serviceaccount/token
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
labels:
k8s-app: kube-proxy
name: kube-proxy
namespace: kube-system
spec:
selector:
matchLabels:
k8s-app: kube-proxy
template:
metadata:
labels:
k8s-app: kube-proxy
spec:
tolerations:
- effect: NoSchedule
key: node-role.kubernetes.io/master
- effect: NoSchedule
key: node.cloudprovider.kubernetes.io/uninitialized
value: "true"
hostNetwork: true
restartPolicy: Always
serviceAccount: kube-proxy
serviceAccountName: kube-proxy
containers:
- name: kube-proxy
image: k8s.gcr.io/kube-proxy-amd64:v1.10.3
command:
- /usr/local/bin/kube-proxy
- --config=/var/lib/kube-proxy/config.conf
imagePullPolicy: IfNotPresent
securityContext:
privileged: true
volumeMounts:
- mountPath: /var/lib/kube-proxy
name: kube-proxy
- mountPath: /run/xtables.lock
name: xtables-lock
- mountPath: /lib/modules
name: lib-modules
readOnly: true
volumes:
- configMap:
defaultMode: 420
name: kube-proxy
name: kube-proxy
- hostPath:
path: /run/xtables.lock
type: FileOrCreate
name: xtables-lock
- hostPath:
path: /lib/modules
name: lib-modules
EOF
安装插件：
$ kubectl create -f /etc/kubernetes/addon/kube-proxy.yml
serviceaccount "kube-proxy" created
clusterrolebinding.rbac.authorization.k8s.io "system:kube-proxy" created
configmap "kube-proxy" created
daemonset.apps "kube-proxy" created
$ kubectl -n kube-system get po -o wide -l k8s-app=kube-proxy
kube-proxy-42f4m 1/1 Running 0 47s 192.168.56.15 kube-n2
kube-proxy-5zn95 1/1 Running 0 48s 192.168.56.14 kube-n1
kube-proxy-7mwrf 1/1 Running 0 48s 192.168.56.11 kube-m1
kube-proxy-bs5p2 1/1 Running 0 47s 192.168.56.16 kube-n3
kube-proxy-qzsrx 1/1 Running 0 47s 192.168.56.13 kube-m3
kube-proxy-sgxvh 1/1 Running 0 47s 192.168.56.12 kube-m2
Kubernetes DNS
Kubernetes DNS 是 Kubernetes 集群内部 Pod 之间互相沟通的重要插件，它允许 Pod 可以通过 Domain Name 方式来连接 Service，其主要由 Kube DNS 与 Sky DNS 组合而成，通过 Kube DNS 监听 Service 与 Endpoint 变化，来提供给 Sky DNS 信息，已更新解析位址。
在 kube-m1 配置 kube-dns.yml 来安装 Kubernetes DNS 插件：
$ cd /etc/kubernetes/addon
$ cat > /etc/kubernetes/addon/kube-dns.yml <<EOF
apiVersion: v1
kind: ServiceAccount
metadata:
name: kube-dns
labels:
k8s-app: kube-dns
kubernetes.io/cluster-service: "true"
addonmanager.kubernetes.io/mode: Reconcile
namespace: kube-system
---
apiVersion: v1
kind: Service
metadata:
name: kube-dns
namespace: kube-system
labels:
k8s-app: kube-dns
kubernetes.io/cluster-service: "true"
addonmanager.kubernetes.io/mode: Reconcile
spec:
selector:
k8s-app: kube-dns
clusterIP: 10.254.0.2
ports:
- name: dns
port: 53
protocol: UDP
- name: dns-tcp
port: 53
protocol: TCP
---
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
name: kube-dns
namespace: kube-system
labels:
k8s-app: kube-dns
kubernetes.io/cluster-service: "true"
addonmanager.kubernetes.io/mode: Reconcile
spec:
selector:
matchLabels:
k8s-app: kube-dns
template:
metadata:
labels:
k8s-app: kube-dns
annotations:
scheduler.alpha.kubernetes.io/critical-pod: ''
spec:
dnsPolicy: Default
serviceAccountName: kube-dns
tolerations:
- key: "CriticalAddonsOnly"
operator: "Exists"
- key: node-role.kubernetes.io/master
effect: NoSchedule
volumes:
- name: kube-dns-config
configMap:
name: kube-dns
optional: true
containers:
- name: kubedns
image: gcr.io/google_containers/k8s-dns-kube-dns-amd64:1.14.7
resources:
limits:
memory: 170Mi
requests:
cpu: 100m
memory: 70Mi
livenessProbe:
httpGet:
path: /healthcheck/kubedns
port: 10054
scheme: HTTP
initialDelaySeconds: 60
timeoutSeconds: 5
successThreshold: 1
failureThreshold: 5
readinessProbe:
httpGet:
path: /readiness
port: 8081
scheme: HTTP
initialDelaySeconds: 3
timeoutSeconds: 5
args:
- "--domain=cluster.local"
- --dns-port=10053
- --v=2
env:
- name: PROMETHEUS_PORT
value: "10055"
ports:
- containerPort: 10053
name: dns-local
protocol: UDP
- containerPort: 10053
name: dns-tcp-local
protocol: TCP
- containerPort: 10055
name: metrics
protocol: TCP
volumeMounts:
- name: kube-dns-config
mountPath: /kube-dns-config
- name: dnsmasq
image: gcr.io/google_containers/k8s-dns-dnsmasq-nanny-amd64:1.14.7
livenessProbe:
httpGet:
path: /healthcheck/dnsmasq
port: 10054
scheme: HTTP
initialDelaySeconds: 60
timeoutSeconds: 5
successThreshold: 1
failureThreshold: 5
args:
- "-v=2"
- "-logtostderr"
- "-configDir=/etc/k8s/dns/dnsmasq-nanny"
- "-restartDnsmasq=true"
- "--"
- "-k"
- "--cache-size=1000"
- "--log-facility=-"
- "--server=/cluster.local/127.0.0.1#10053"
- "--server=/in-addr.arpa/127.0.0.1#10053"
- "--server=/ip6.arpa/127.0.0.1#10053"
ports:
- containerPort: 53
name: dns
protocol: UDP
- containerPort: 53
name: dns-tcp
protocol: TCP
resources:
requests:
cpu: 150m
memory: 20Mi
volumeMounts:
- name: kube-dns-config
mountPath: /etc/k8s/dns/dnsmasq-nanny
- name: sidecar
image: gcr.io/google_containers/k8s-dns-sidecar-amd64:1.14.7
livenessProbe:
httpGet:
path: /metrics
port: 10054
scheme: HTTP
initialDelaySeconds: 60
timeoutSeconds: 5
successThreshold: 1
failureThreshold: 5
args:
- "--v=2"
- "--logtostderr"
- "--probe=kubedns,127.0.0.1:10053,kubernetes.default.svc.cluster.local,5,A"
- "--probe=dnsmasq,127.0.0.1:53,kubernetes.default.svc.cluster.local,5,A"
ports:
- containerPort: 10054
name: metrics
protocol: TCP
resources:
requests:
memory: 20Mi
cpu: 10m
EOF
- 其中
10.254.0.2为 kubelet.service 中配置的--cluster-dns。
安装插件：
$ kubectl create -f /etc/kubernetes/addon/kube-dns.yml
serviceaccount "kube-dns" created
service "kube-dns" created
deployment.extensions "kube-dns" created
$ kubectl -n kube-system get po -l k8s-app=kube-dns
NAME READY STATUS RESTARTS AGE
kube-dns-654684d656-vzkjk 0/3 Pending 0 19s
这边会发现处于 Pending 状态，这是由于 Kubernetes Pod Network 还未建立完成，因此所有节点会处于 NotReady 状态，而造成 Pod 无法被排程分配到指定节点上启动，下面安装 Pod Network。
Calico Network 安装与设定
Calico 是一款纯 Layer 3 的资料中心网络方案(不需要 Overlay 网络)，Calico 好处是它整合了各种云原生平台，且 Calico 在每一个节点利用 Linux Kernel 实现高效的 vRouter 来负责资料的转发，而当资料中心复杂度增加时，可以用 BGP route reflector 来达成。
本次不采用手动方式来建立 Calico 网络，若想了解可以参考 Integration Guide。
在 kube-m1 配置 calico.yaml 来安装 Calico Network：
$ mkdir /etc/kubernetes/network && cd /etc/kubernetes/network
$ cat > /etc/kubernetes/network/calico.yml <<EOF
kind: ConfigMap
apiVersion: v1
metadata:
name: calico-config
namespace: kube-system
data:
etcd_endpoints: "https://192.168.56.11:2379,https://192.168.56.12:2379,https://192.168.56.13:2379"
calico_backend: "bird"
cni_network_config: |-
{
"name": "k8s-pod-network",
"cniVersion": "0.3.0",
"plugins": [
{
"type": "calico",
"etcd_endpoints": "__ETCD_ENDPOINTS__",
"etcd_ca_cert_file": "/etc/kubernetes/ssl/ca.pem",
"etcd_cert_file": "/etc/etcd/ssl/etcd.pem",
"etcd_key_file": "/etc/etcd/ssl/etcd-key.pem",
"log_level": "info",
"mtu": 1500,
"ipam": {
"type": "calico-ipam"
},
"policy": {
"type": "k8s",
"k8s_api_root": "https://__KUBERNETES_SERVICE_HOST__:__KUBERNETES_SERVICE_PORT__",
"k8s_auth_token": "__SERVICEACCOUNT_TOKEN__"
},
"kubernetes": {
"kubeconfig": "/etc/cni/net.d/__KUBECONFIG_FILENAME__"
}
},
{
"type": "portmap",
"snat": true,
"capabilities": {"portMappings": true}
}
]
}
---
kind: DaemonSet
apiVersion: extensions/v1beta1
metadata:
name: calico-node
namespace: kube-system
labels:
k8s-app: calico-node
spec:
selector:
matchLabels:
k8s-app: calico-node
updateStrategy:
type: RollingUpdate
rollingUpdate:
maxUnavailable: 1
template:
metadata:
labels:
k8s-app: calico-node
annotations:
scheduler.alpha.kubernetes.io/critical-pod: ''
spec:
hostNetwork: true
tolerations:
- key: node.cloudprovider.kubernetes.io/uninitialized
value: "true"
effect: NoSchedule
- key: node-role.kubernetes.io/master
effect: NoSchedule
- key: CriticalAddonsOnly
operator: Exists
serviceAccountName: calico-cni-plugin
terminationGracePeriodSeconds: 0
containers:
- name: calico-node
image: quay.io/calico/node:v3.0.4
env:
- name: CLUSTER_TYPE
value: "k8s,bgp"
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
- name: CALICO_NETWORKING_BACKEND
valueFrom:
configMapKeyRef:
name: calico-config
key: calico_backend
- name: CALICO_DISABLE_FILE_LOGGING
value: "true"
- name: CALICO_K8S_NODE_REF
valueFrom:
fieldRef:
fieldPath: spec.nodeName
- name: FELIX_DEFAULTENDPOINTTOHOSTACTION
value: "ACCEPT"
- name: CALICO_IPV4POOL_CIDR
value: "10.244.0.0/16"
- name: CALICO_IPV4POOL_IPIP
value: "Always"
- name: FELIX_IPV6SUPPORT
value: "false"
- name: FELIX_IPINIPMTU
value: "1440"
- name: FELIX_LOGSEVERITYSCREEN
value: "info"
- name: IP
value: "autodetect"
- name: FELIX_HEALTHENABLED
value: "true"
- name: IP_AUTODETECTION_METHOD
value: "interface=eth1"
- name: IP6_AUTODETECTION_METHOD
value: "interface=eth1"
- name: ETCD_CA_CERT_FILE
value: "/etc/kubernetes/ssl/ca.pem"
- name: ETCD_CERT_FILE
value: "/etc/etcd/ssl/etcd.pem"
- name: ETCD_KEY_FILE
value: "/etc/etcd/ssl/etcd-key.pem"
securityContext:
privileged: true
resources:
requests:
cpu: 250m
livenessProbe:
httpGet:
path: /liveness
port: 9099
periodSeconds: 10
initialDelaySeconds: 10
failureThreshold: 6
readinessProbe:
httpGet:
path: /readiness
port: 9099
periodSeconds: 10
volumeMounts:
- mountPath: /lib/modules
name: lib-modules
readOnly: true
- mountPath: /var/run/calico
name: var-run-calico
readOnly: false
- mountPath: /etc/etcd/ssl
name: etcd-ca-certs
- mountPath: /etc/kubernetes/ssl
name: kubernetes-ca-certs
readOnly: true
- name: install-cni
image: quay.io/calico/cni:v2.0.3
command: ["/install-cni.sh"]
env:
- name: CNI_CONF_NAME
value: "10-calico.conflist"
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
- name: CNI_NETWORK_CONFIG
valueFrom:
configMapKeyRef:
name: calico-config
key: cni_network_config
volumeMounts:
- mountPath: /host/opt/cni/bin
name: cni-bin-dir
- mountPath: /host/etc/cni/net.d
name: cni-net-dir
volumes:
- name: etcd-ca-certs
hostPath:
path: /etc/etcd/ssl
type: DirectoryOrCreate
- name: kubernetes-ca-certs
hostPath:
path: /etc/kubernetes/ssl
type: DirectoryOrCreate
- name: lib-modules
hostPath:
path: /lib/modules
- name: var-run-calico
hostPath:
path: /var/run/calico
- name: cni-bin-dir
hostPath:
path: /opt/cni/bin
- name: cni-net-dir
hostPath:
path: /etc/cni/net.d
---
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
name: calico-kube-controllers
namespace: kube-system
labels:
k8s-app: calico-kube-controllers
spec:
replicas: 1
strategy:
type: Recreate
template:
metadata:
name: calico-kube-controllers
namespace: kube-system
labels:
k8s-app: calico-kube-controllers
annotations:
scheduler.alpha.kubernetes.io/critical-pod: ''
spec:
hostNetwork: true
tolerations:
- key: node.cloudprovider.kubernetes.io/uninitialized
value: "true"
effect: NoSchedule
- key: node-role.kubernetes.io/master
effect: NoSchedule
- key: CriticalAddonsOnly
operator: Exists
serviceAccountName: calico-kube-controllers
containers:
- name: calico-kube-controllers
image: quay.io/calico/kube-controllers:v2.0.2
env:
- name: ETCD_ENDPOINTS
valueFrom:
configMapKeyRef:
name: calico-config
key: etcd_endpoints
- name: ENABLED_CONTROLLERS
value: policy,profile,workloadendpoint,node
- name: ETCD_CA_CERT_FILE
value: "/etc/kubernetes/ssl/ca.pem"
- name: ETCD_CERT_FILE
value: "/etc/etcd/ssl/etcd.pem"
- name: ETCD_KEY_FILE
value: "/etc/etcd/ssl/etcd-key.pem"
volumeMounts:
- mountPath: /etc/etcd/ssl
name: etcd-ca-certs
readOnly: true
- mountPath: /etc/kubernetes/ssl
name: kubernetes-ca-certs
readOnly: true
volumes:
- name: etcd-ca-certs
hostPath:
path: /etc/etcd/ssl
type: DirectoryOrCreate
- name: kubernetes-ca-certs
hostPath:
path: /etc/kubernetes/ssl
type: DirectoryOrCreate
---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
name: calico-cni-plugin
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: calico-cni-plugin
subjects:
- kind: ServiceAccount
name: calico-cni-plugin
namespace: kube-system
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: calico-cni-plugin
rules:
- apiGroups: [""]
resources:
- pods
- nodes
verbs:
- get
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: calico-cni-plugin
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
name: calico-kube-controllers
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: calico-kube-controllers
subjects:
- kind: ServiceAccount
name: calico-kube-controllers
namespace: kube-system
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: calico-kube-controllers
rules:
- apiGroups:
- ""
- extensions
resources:
- pods
- namespaces
- networkpolicies
- nodes
verbs:
- watch
- list
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: calico-kube-controllers
namespace: kube-system
EOF
安装插件：
$ kubectl create -f /etc/kubernetes/network/calico.yml
configmap "calico-config" created
daemonset.extensions "calico-node" created
deployment.extensions "calico-kube-controllers" created
clusterrolebinding.rbac.authorization.k8s.io "calico-cni-plugin" created
clusterrole.rbac.authorization.k8s.io "calico-cni-plugin" created
serviceaccount "calico-cni-plugin" created
clusterrolebinding.rbac.authorization.k8s.io "calico-kube-controllers" created
clusterrole.rbac.authorization.k8s.io "calico-kube-controllers" created
serviceaccount "calico-kube-controllers" created
$ kubectl -n kube-system get po -l k8s-app=calico-node -o wide
NAME READY STATUS RESTARTS AGE IP NODE
calico-node-hjghp 2/2 Running 0 9m 192.168.56.16 kube-n3
calico-node-jl9w2 2/2 Running 0 9m 192.168.56.12 kube-m2
calico-node-k4lkr 2/2 Running 0 9m 192.168.56.14 kube-n1
calico-node-kj9xd 2/2 Running 0 9m 192.168.56.15 kube-n2
calico-node-mf2xv 2/2 Running 0 9m 192.168.56.11 kube-m1
calico-node-p8pqq 2/2 Running 0 9m 192.168.56.13 kube-m3
查看刚刚 DNS 处于 Pending 的 Pod 是否已经启动：
$ kubectl -n kube-system get po -l k8s-app=kube-dns
NAME READY STATUS RESTARTS AGE
kube-dns-654684d656-vzkjk 3/3 Running 0 25m
在 kube-m1 下载 Calico CLI 来查看 Calico nodes:
$ wget https://github.com/projectcalico/calicoctl/releases/download/v3.1.0/calicoctl -O /usr/local/bin/calicoctl
$ chmod u+x /usr/local/bin/calicoctl
$ cat <<EOF > ~/calico-rc
export ETCD_ENDPOINTS="https://192.168.56.11:2379,https://192.168.56.12:2379,https://192.168.56.13:2379"
export ETCD_CA_CERT_FILE="/etc/kubernetes/ssl/ca.pem"
export ETCD_CERT_FILE="/etc/etcd/ssl/etcd.pem"
export ETCD_KEY_FILE="/etc/etcd/ssl/etcd-key.pem"
EOF
$ calicoctl node status
Calico process is running.
IPv4 BGP status
+---------------+-------------------+-------+----------+-------------+
| PEER ADDRESS | PEER TYPE | STATE | SINCE | INFO |
+---------------+-------------------+-------+----------+-------------+
| 192.168.56.12 | node-to-node mesh | up | 06:59:37 | Established |
| 192.168.56.13 | node-to-node mesh | up | 06:59:38 | Established |
| 192.168.56.14 | node-to-node mesh | up | 07:04:57 | Established |
| 192.168.56.15 | node-to-node mesh | up | 07:06:35 | Established |
| 192.168.56.16 | node-to-node mesh | up | 07:07:06 | Established |
+---------------+-------------------+-------+----------+-------------+
IPv6 BGP status
No IPv6 peers found.
