vmlinux 和 initrd
vmlinux：
On Linux systems, vmlinux is a statically linked executable file that contains the Linux kernel in one of the executable file formats supported by linux, including ELF, COFF and a.out. The vmlinux file might be required for kernel debugging, generating symbol table or other operations, but must be made bootable before being used as an operating system kernel by adding a multiboot header, bootsector and setup routines.
initrd：
The initial RAM disk (initrd) is an initial root file system that is mounted prior to when the real root file system is available. The initrd is bound to the kernel and loaded as part of the kernel boot procedure. The kernel then mounts this initrd as part of the two-stage boot process to load the modules to make the real file systems available and get at the real root file system.
The initrd contains a minimal set of directories and executables to achieve this, such as the insmod tool to install kernel modules into the kernel.
In the case of desktop or server Linux systems, the initrd is a transient file system. Its lifetime is short, only serving as a bridge to the real root file system. In embedded systems with no mutable storage, the initrd is the permanent root file system.
vmlinux是内核文件，initrd处理启动过程中2个stage的一些工作并加载相关模块得到文件根系统，两者结合起来就可以linux启动内核。
Linux initial RAM disk (initrd) overview
Learn about its anatomy, creation, and use in the Linux boot process
Summary: The Linux® initial RAM disk (initrd) is a temporary root file system that is mounted during system boot to support the two-state boot process. The initrd contains various executables and drivers that permit the real root file system to be mounted, after which the initrd RAM disk is unmounted and its memory freed. In many embedded Linux systems, the initrd is the final root file system. This article explores the initial RAM disk for Linux 2.6, including its creation and use in the Linux kernel.
Date: 31 Jul 2006
Level: Intermediate
Comments: 0 (View | Add comment - Sign in)
Average rating (436 votes)
Show articles and other content related to my search: what is initrd.img
The initial RAM disk (initrd) is an initial root file system that is mounted prior to when the real root file system is available. The initrd is bound to the kernel and loaded as part of the kernel boot procedure. The kernel then mounts this initrd as part of the two-stage boot process to load the modules to make the real file systems available and get at the real root file system.
The initrd contains a minimal set of directories and executables to achieve this, such as the insmod tool to install kernel modules into the kernel.
In the case of desktop or server Linux systems, the initrd is a transient file system. Its lifetime is short, only serving as a bridge to the real root file system. In embedded systems with no mutable storage, the initrd is the permanent root file system. This article explores both of these contexts.
The initrd image contains the necessary executables and system files to support the second-stage boot of a Linux system.
Depending on which version of Linux you're running, the method for creating the initial RAM disk can vary. Prior to Fedora Core 3, the initrd is constructed using the loop device. The loop device is a device driver that allows you to mount a file as a block device and then interpret the file system it represents. The loop device may not be present in your kernel, but you can enable it through the kernel's configuration tool (make menuconfig) by selecting Device Drivers > Block Devices > Loopback Device Support. You can inspect the loop device as follows (your initrd file name will vary):
Listing 1. Inspecting the initrd (prior to FC3)
# mkdir temp ; cd temp # cp /boot/initrd.img.gz . # gunzip initrd.img.gz # mount -t ext -o loop initrd.img /mnt/initrd # ls -la /mnt/initrd # |
You can now inspect the /mnt/initrd subdirectory for the contents of the initrd. Note that even if your initrd image file does not end with the .gz suffix, it's a compressed file, and you can add the .gz suffix to gunzip it.
Beginning with Fedora Core 3, the default initrd image is a compressed cpio archive file. Instead of mounting the file as a compressed image using the loop device, you can use a cpio archive. To inspect the contents of a cpio archive, use the following commands:
Listing 2. Inspecting the initrd (FC3 and later)
# mkdir temp ; cd temp # cp /boot/initrd-2.6.14.2.img initrd-2.6.14.2.img.gz # gunzip initrd-2.6.14.2.img.gz # cpio -i --make-directories < initrd-2.6.14.2.img # |
The result is a small root file system, as shown in Listing 3. The small, but necessary, set of applications are present in the ./bin directory, including nash (not a shell, a script interpreter), insmod for loading kernel modules, and lvm (logical volume manager tools).
Listing 3. Default Linux initrd directory structure
# ls -la # drwxr-xr-x 10 root root 4096 May 7 02:48 . drwxr-x--- 15 root root 4096 May 7 00:54 .. drwxr-xr-x 2 root root 4096 May 7 02:48 bin drwxr-xr-x 2 root root 4096 May 7 02:48 dev drwxr-xr-x 4 root root 4096 May 7 02:48 etc -rwxr-xr-x 1 root root 812 May 7 02:48 init -rw-r--r-- 1 root root 1723392 May 7 02:45 initrd-2.6.14.2.img drwxr-xr-x 2 root root 4096 May 7 02:48 lib drwxr-xr-x 2 root root 4096 May 7 02:48 loopfs drwxr-xr-x 2 root root 4096 May 7 02:48 proc lrwxrwxrwx 1 root root 3 May 7 02:48 sbin -> bin drwxr-xr-x 2 root root 4096 May 7 02:48 sys drwxr-xr-x 2 root root 4096 May 7 02:48 sysroot # |
Of interest in Listing 3 is the init file at the root. This file, like the traditional Linux boot process, is invoked when the initrd image is decompressed into the RAM disk. We'll explore this later in the article.
Let's now go back to the beginning to formally understand how the initrd image is constructed in the first place. For a traditional Linux system, the initrd image is created during the Linux build process. Numerous tools, such as mkinitrd, can be used to automatically build an initrd with the necessary libraries and modules for bridging to the real root file system. The mkinitrd utility is actually a shell script, so you can see exactly how it achieves its result. There's also the YAIRD (Yet Another Mkinitrd) utility, which permits customization of every aspect of the initrd construction.
Manually building a custom initial RAM disk
Because there is no hard drive in many embedded systems based on Linux, the initrd also serves as the permanent root file system. Listing 4 shows how to create an initrd image. I'm using a standard Linux desktop so you can follow along without an embedded target. Other than cross-compilation, the concepts (as they apply to initrd construction) are the same for an embedded target.
Listing 4. Utility (mkird) to create a custom initrd
#!/bin/bash # Housekeeping... rm -f /tmp/ramdisk.img rm -f /tmp/ramdisk.img.gz # Ramdisk Constants RDSIZE=4000 BLKSIZE=1024 # Create an empty ramdisk image dd if=/dev/zero of=/tmp/ramdisk.img bs=$BLKSIZE count=$RDSIZE # Make it an ext2 mountable file system /sbin/mke2fs -F -m 0 -b $BLKSIZE /tmp/ramdisk.img $RDSIZE # Mount it so that we can populate mount /tmp/ramdisk.img /mnt/initrd -t ext2 -o loop=/dev/loop0 # Populate the filesystem (subdirectories) mkdir /mnt/initrd/bin mkdir /mnt/initrd/sys mkdir /mnt/initrd/dev mkdir /mnt/initrd/proc # Grab busybox and create the symbolic links pushd /mnt/initrd/bin cp /usr/local/src/busybox-1.1.1/busybox . ln -s busybox ash ln -s busybox mount ln -s busybox echo ln -s busybox ls ln -s busybox cat ln -s busybox ps ln -s busybox dmesg ln -s busybox sysctl popd # Grab the necessary dev files cp -a /dev/console /mnt/initrd/dev cp -a /dev/ramdisk /mnt/initrd/dev cp -a /dev/ram0 /mnt/initrd/dev cp -a /dev/null /mnt/initrd/dev cp -a /dev/tty1 /mnt/initrd/dev cp -a /dev/tty2 /mnt/initrd/dev # Equate sbin with bin pushd /mnt/initrd ln -s bin sbin popd # Create the init file cat >> /mnt/initrd/linuxrc << EOF #!/bin/ash echo echo "Simple initrd is active" echo mount -t proc /proc /proc mount -t sysfs none /sys /bin/ash --login EOF chmod +x /mnt/initrd/linuxrc # Finish up... umount /mnt/initrd gzip -9 /tmp/ramdisk.img cp /tmp/ramdisk.img.gz /boot/ramdisk.img.gz |
To create an initrd, begin by creating an empty file, using /dev/zero (a stream of zeroes) as input writing to the ramdisk.img file. The resulting file is 4MB in size (4000 1K blocks). Then use the mke2fs command to create an ext2 (second extended) file system using the empty file. Now that this file is an ext2 file system, mount the file to /mnt/initrd using the loop device. At the mount point, you now have a directory that represents an ext2 file system that you can populate for your initrd. Much of the rest of the script provides this functionality.
The next step is creating the necessary subdirectories that make up your root file system: /bin, /sys, /dev, and /proc. Only a handful are needed (for example, no libraries are present), but they contain quite a bit of functionality.
To make your root file system useful, use BusyBox. This utility is a single image that contains many individual utilities commonly found in Linux systems (such as ash, awk, sed, insmod, and so on). The advantage of BusyBox is that it packs many utilities into one while sharing their common elements, resulting in a much smaller image. This is ideal for embedded systems. Copy the BusyBox image from its source directory into your root in the /bin directory. A number of symbolic links are then created that all point to the BusyBox utility. BusyBox figures out which utility was invoked and performs that functionality. A small set of links are created in this directory to support your init script (with each command link pointing to BusyBox).
The next step is the creation of a small number of special device files. I copy these directly from my current /dev subdirectory, using the -a option (archive) to preserve their attributes.
The penultimate step is to generate the linuxrc file. After the kernel mounts the RAM disk, it searches for an init file to execute. If an init file is not found, the kernel invokes the linuxrc file as its startup script. You do the basic setup of the environment in this file, such as mounting the /proc file system. In addition to /proc, I also mount the /sys file system and emit a message to the console. Finally, I invoke ash (a Bourne Shell clone) so I can interact with the root file system. The linuxrc file is then made executable using chmod.
Finally, your root file system is complete. It's unmounted and then compressed using gzip. The resulting file (ramdisk.img.gz) is copied to the /boot subdirectory so it can be loaded via GNU GRUB.
To build the initial RAM disk, you simply invoke mkird, and the image is automatically created and copied to /boot.
Testing the custom initial RAM disk
Your new initrd image is in /boot, so the next step is to test it with your default kernel. You can now restart your Linux system. When GRUB appears, press the C key to enable the command-line utility within GRUB. You can now interact with GRUB to define the specific kernel and initrd image to load. The kernel command allows you to define the kernel file, and the initrd command allows you to specify the particular initrd image file. When these are defined, use the boot command to boot the kernel, as shown in Listing 5.
Listing 5. Manually booting the kernel and initrd using GRUB
GNU GRUB version 0.95 (638K lower / 97216K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename. ESC at any time exits.]
grub> kernel /bzImage-2.6.1
[Linux-bzImage, setup=0x1400, size=0x29672e]
grub> initrd /ramdisk.img.gz
[Linux-initrd @ 0x5f2a000, 0xb5108 bytes]
grub> boot
Uncompressing Linux... OK, booting the kernel.
|
After the kernel starts, it checks to see if an initrd image is available (more on this later), and then loads and mounts it as the root file system. You can see the end of this particular Linux startup in Listing 6. When started, the ash shell is available to enter commands. In this example, I explore the root file system and interrogate a virtual proc file system entry. I also demonstrate that you can write to the file system by touching a file (thus creating it). Note here that the first process created is linuxrc (commonly init).
Listing 6. Booting a Linux kernel with your simple initrd
... md: Autodetecting RAID arrays md: autorun md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 file system). Freeing unused kernel memory: 208k freed / $ ls bin etc linuxrc proc sys dev lib lost+found sbin / $ cat /proc/1/cmdline /bin/ash/linuxrc / $ cd bin /bin $ ls ash cat echo mount sysctl busybox dmesg ls ps /bin $ touch zfile /bin $ ls ash cat echo mount sysctl busybox dmesg ls ps zfile |
Booting with an initial RAM disk
Now that you've seen how to build and use a custom initial RAM disk, this section explores how the kernel identifies and mounts the initrd as its root file system. I walk through some of the major functions in the boot chain and explain what's happening.
The boot loader, such as GRUB, identifies the kernel that is to be loaded and copies this kernel image and any associated initrd into memory. You can find much of this functionality in the ./init subdirectory under your Linux kernel source directory.
After the kernel and initrd images are decompressed and copied into memory, the kernel is invoked. Various initialization is performed and, eventually, you find yourself in init/main.c:init() (subdir/file:function). This function performs a large amount of subsystem initialization. A call is made here to init/do_mounts.c:prepare_namespace(), which is used to prepare the namespace (mount the dev file system, RAID, or md, devices, and, finally, the initrd). Loading the initrd is done through a call to init/do_mounts_initrd.c:initrd_load().
The initrd_load() function calls init/do_mounts_rd.c:rd_load_image(), which determines the RAM disk image to load through a call to init/do_mounts_rd.c:identify_ramdisk_image(). This function checks the magic number of the image to determine if it's a minux, etc2, romfs, cramfs, or gzip format. Upon return to initrd_load_image, a call is made to init/do_mounts_rd:crd_load(). This function allocates space for the RAM disk, calculates the cyclic redundancy check (CRC), and then uncompresses and loads the RAM disk image into memory. At this point, you have the initrd image in a block device suitable for mounting.
Mounting the block device now as root begins with a call to init/do_mounts.c:mount_root(). The root device is created, and then a call is made to init/do_mounts.c:mount_block_root(). From here, init/do_mounts.c:do_mount_root() is called, which calls fs/namespace.c:sys_mount() to actually mount the root file system and then chdir to it. This is where you see the familiar message shown in Listing 6: VFS: Mounted root (ext2 file system).
Finally, you return to the init function and call init/main.c:run_init_process. This results in a call to execve to start the init process (in this case /linuxrc). The linuxrc can be an executable or a script (as long as a script interpreter is available for it).
The hierarchy of functions called is shown in Listing 7. Not all functions that are involved in copying and mounting the initial RAM disk are shown here, but this gives you a rough overview of the overall flow.
Listing 7. Hierarchy of major functions in initrd loading and mounting
init/main.c:init
init/do_mounts.c:prepare_namespace
init/do_mounts_initrd.c:initrd_load
init/do_mounts_rd.c:rd_load_image
init/do_mounts_rd.c:identify_ramdisk_image
init/do_mounts_rd.c:crd_load
lib/inflate.c:gunzip
init/do_mounts.c:mount_root
init/do_mounts.c:mount_block_root
init/do_mounts.c:do_mount_root
fs/namespace.c:sys_mount
init/main.c:run_init_process
execve
|
Much like embedded booting scenarios, a local disk (floppy or CD-ROM) isn't necessary to boot a kernel and ramdisk root filesystem. The Dynamic Host Configuration Protocol (or DHCP) can be used to identify network parameters such as IP address and subnet mask. The Trivial File Transfer Protocol (or TFTP) can then be used to transfer the kernel image and the initial ramdisk image to the local device. Once transferred, the Linux kernel can be booted and initrd mounted, as is done in a local image boot.
When you're building an embedded system and want the smallest initrd image possible, there are a few tips to consider. The first is to use BusyBox (demonstrated in this article). BusyBox takes several megabytes of utilities and shrinks them down to several hundred kilobytes.
In this example, the BusyBox image is statically linked so that no libraries are required. However, if you need the standard C library (for your custom binaries), there are other options beyond the massive glibc. The first small library is uClibc, which is a minimized version of the standard C library for space-constrained systems. Another library that's ideal for space-constrained environments is dietlib. Keep in mind that you'll need to recompile the binaries that you want in your embedded system using these libraries, so some additional work is required (but worth it).
The initial RAM disk was originally created to support bridging the kernel to the ultimate root file system through a transient root file system. The initrd is also useful as a non-persistent root file system mounted in a RAM disk for embedded Linux systems.
Learn
- "Inside the Linux boot process" (developerWorks, May 2006) explores the Linux boot process from the initial bootstrap to the start of the first user-space application.
- In "Boot Linux from a FireWire device" (developerWorks, July 2004), see how you can start Linux (with its initrd) from a multitude of devices on a variety of platforms.
- The cpio file format is both simple and compact. It's no wonder the Fedora team chose it as a format option for the initrd.
- The mkinitrd utility is ideal for creating initrd images. In addition to creating an initrd image, it also identifies the modules to load for your particular system and populates them into the image.
- The loop device is a great driver for mounting image files as file systems.
- The Network Boot and Exotic Root HOWTO illustrates not only booting Linux from the network, but also other interesting scenarios such as floppy boot, CD-ROM boot, and embedded scenarios.
- In the developerWorks Linux zone, find more resources for Linux developers.
- Stay current with developerWorks technical events and Webcasts.
Get products and technologies
- The cpio file format (now supported as a Fedora Core initrd image format) has a long history and operates on a wide range of UNIXes.
- The ash shell is a Bourne Shell clone (mostly compliant) that is small, but does the job. It's great for use as a script interpreter in space-constrained Linux embedded systems.
- BusyBox is a great way to shrink the memory requirements for your next embedded Linux project.
- To shrink the size of your initrd even further, consider using a C library alternative to glibc, such as uClibc or dietlib. If you prefer C++, you can try the alpha version of the uClibc++ library.
- Minimax is a Linux distribution that fits entirely in an initrd image!
- Order the SEK for Linux, a two-DVD set containing the latest IBM trial software for Linux from DB2®, Lotus®, Rational®, Tivoli®, and WebSphere®.
- With IBM trial software, available for download directly from developerWorks, build your next development project on Linux.
Discuss
- Check out developerWorks blogs and get involved in the developerWorks community.
M. Tim Jones is an embedded software architect and the author of GNU/Linux Application Programming, AI Application Programming, and BSD Sockets Programming from a Multilanguage Perspective. His engineering background ranges from the development of kernels for geosynchronous spacecraft to embedded systems architecture and networking protocols development. Tim is a Consultant Engineer for Emulex Corp. in Longmont, Colorado.
