test1

[1] P. Oliveira, S. Kilchert, M. May, T. Panzera, F. Scarpa, S. Hiermaier, Numerical and experimental investigations on sandwich panels made with eco-friendly components under low-velocity impact, JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 24 (2022) 419-447.

[2] D.A. Masurkar, P. Jaiswal, B. Kale, A. Rathod, Use of Free Gingival Graft and PRF to Increase the Width of the Attached Gingiva: A Novel Approach, JOURNAL OF CLINICAL AND DIAGNOSTIC RESEARCH, 16 (2022) ZD5-ZD7.

[3] H. Mahmoudi, S.M.M. Hadavi, Y. Palizdar, Plasma Foil Aluminizing of Steel at a Temperature Below Aluminum Melting Point, HIGH TEMPERATURE, 60 (2022) 599-606.

[4] S.M. Llano, A. Maria Gomez, Y. Duarte-Correa, Effect of Drying Methods and Processing Conditions on the Quality of Curcuma longa Powder, PROCESSES, 10 (2022).

[5] Q. Liu, X. Hu, C. Su, C. Zhang, Abrasion resistance of femtosecond pulsed laser processed micro molds of laser shock imprinting, SURFACE & COATINGS TECHNOLOGY, 447 (2022).

[6] B. Lin, X. Guan, Z. Huang, P. Wang, H. Jiang, R. Xu, Q. Jiao, R. Li, S. Wang, Improvement of radio frequency heating uniformity in wheat kernels with aluminum foil sheets covered on rectangular container walls, JOURNAL OF FOOD ENGINEERING, 314 (2022).

[7] R. Li, X. Song, X. Guan, B. Ni, Y. Gao, L. Hou, X. Kou, S. Wang, New strategy for improving heating uniformity and insect mortality in radio frequency treated mung beans, INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING, 15 (2022) 229-235.

[8] B.-Y. Lee, H.-G. Jeong, S.J. Kim, B.-G. Kang, K.-S. Jang, Physical and Chemical Compatibilization Treatment with Modified Aminosilanes for Aluminum/Polyamide Adhesion, ACS OMEGA, 7 (2022) 23865-23874.

[9] G. Kervancioglu, E.K. Demirci, S. Cetinel, A newly developed carrier for the vitrification of prepubertal testicular tissue and its comparison with four different carriers, REPRODUCTIVE BIOMEDICINE ONLINE, 44 (2022) 1071-1078.

[10] J.A. Johnson, J. Heller, F.F. Owsley, A.M. Cassens, L.A.A. Kinman, Physical Effects of Carrot Fiber as a Binder in Cooked Chicken Sausage, JOURNAL OF ANIMAL SCIENCE, 100 (2022) 24-24.

[11] S.R. Jannah, E.S. Rahayu, R. Yanti, D.A. Suroto, R. Wikandari, Study of Viability, Storage Stability, and Shelf Life of Probiotic Instant Coffee Lactiplantibacillus plantarum Subsp. plantarum Dad-13 in Vacuum and Nonvacuum Packaging at Different Storage Temperatures, INTERNATIONAL JOURNAL OF FOOD SCIENCE, 2022 (2022).

[12] J.G. Huerta-Munoz, M. De Lourdes Guzman-Castillo, H. Armendariz-Herrera, J.S. Valente, A. Aragon-Pina, M.-G. Cardenas-Galindo, B.E. Handy, Upcycling of Municipal Glass and Aluminum Wastes for Synthesis of Hierarchical ZSM-5, CLEAN-SOIL AIR WATER, 50 (2022).

[13] T. Hernandez-Ortiz, I. Salgado-Transito, C.A. Pineda-Arellano, J. Vergara-Sanchez, M. Montiel-Gonzalez, Effective removal of fecal coliforms from river water in a rural community using low-cost CPC, ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 44 (2022) 8908-8920.

[14] J. Han, J. Tang, X. Tian, T. You, L. Xia, Y. Yao, Laser Microfabrication of Janus Tapered Aluminum Foil for Self-Driven Transportation of Bubbles, ADVANCED ENGINEERING MATERIALS, 24 (2022).

[15] X. Fan, Flexible dye-sensitized solar cells assisted with lead-free perovskite halide, JOURNAL OF MATERIALS RESEARCH, 37 (2022) 866-875.

[16] T. Behjat, A. Shakerardekani, The effect of packaging and storage time on quality of clustered fresh pistachio, JOURNAL OF FOOD SCIENCE, 87 (2022) 2943-2952.

[17] M.T. Asefa, G.B. Feyisa, Comparative Investigation on Two Synthesizing Methods of Zeolites for Removal of Methylene Blue from Aqueous Solution, INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING, 2022 (2022).

[18] A. Abubakkar, A.M. Kumar, Temperature distribution in a concrete slab with sand, gravel and radiant barrier, in:  MATERIALS TODAY-PROCEEDINGS, 2022, pp. 399-403.

[19] B. Zhang, H. Yang, F. Xiong, H. Liu, J. Hao, X. Liu, Research on the transient forming process and high-temperature stability mechanism of warm laser shock imprinting, OPTICS AND LASERS IN ENGINEERING, 146 (2021).

[20] H. Yang, Y. Lou, Y. Liu, D. Zhou, Effect of rice intercropping on CH_4 and N_2O emissions in a subtropical paddy field under nighttime warming, Acta Ecologica Sinica, 41 (2021) 553-564.

[21] S. Xu, X. Shang, H. Zhang, X. Dong, Z. Cui, Size Effects on the Mechanical Responses and Deformation Mechanisms of AZ31 Mg Foils, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 52 (2021) 3585-3599.

[22] J. Tang, Y. Zhang, Y. Yao, N. Dai, Z. Ge, D. Wu, High-Performance Ultrafine Bubble Aeration on Janus Aluminum Foil Prepared by Laser Microfabrication, LANGMUIR, 37 (2021) 6947-6952.

[23] F. Tamborini, D. Sallam, F. Maggiulli, I. Pellegatta, M. Corno, M. Cherubino, L. Valdatta, Treatment of a Case of Toe Hair-Thread Tourniquet Syndrome With Hirase Technique, PEDIATRIC EMERGENCY CARE, 37 (2021) E664-E665.

[24] A. Souilhi, R. Abidi, A new concept of edge shrinkage, case deduced from the treatment of Pet-Al residues of post-consumed food cartons with an alkaline solution, CLEANER ENGINEERING AND TECHNOLOGY, 4 (2021).

[25] R. Singh, A.K. Gupta, C.P. Pradeep, Synthesis of a New Series of Organic Solid-State Near-Infrared Emitters: The Role of Crystal Packing and Weak Intermolecular Interactions and Application in Latent Fingerprint Detection, CRYSTAL GROWTH & DESIGN, 21 (2021) 1062-1076.

[26] U. Sharif, B. Sun, M.S. Islam, K. Majeed, D.S. Ibrahim, O.O. Adewale, N. Akhtar, Z.I. Zaki, Z.M. El-Bahy, Fracture Toughness Analysis of Aluminum (Al) Foil and Its Adhesion with Low-Density Polyethylene (LPDE) in the Packing Industry, COATINGS, 11 (2021).

[27] M.W. Shahzad, J. Lin, B.B. Xu, L. Dala, Q. Chen, M. Burhan, M. Sultan, W. Worek, K.C. Ng, A spatiotemporal indirect evaporative cooler enabled by transiently interceding water mist, ENERGY, 217 (2021).

[28] A. Sgueglia, A. Frattarelli, A. Gentile, G. Urbinati, S. Lucioli, M.A. Germana, E. Caboni, Cryopreservation of Hazelnut (Corylus avellana L.) Axillary Buds from In Vitro Shoots Using the Droplet Vitrification Method, HORTICULTURAE, 7 (2021).

[29] T. Sengsuk, P. Songtipya, E. Kalkornsurapranee, J. Johns, L. Songtipya, Active Bio-Based Pressure-Sensitive Adhesive Based Natural Rubber for Food Antimicrobial Applications: Effect of Processing Parameters on Its Adhesion Properties, POLYMERS, 13 (2021).

[30] C. Sanchez-Romero, Somatic Embryogenesis in Olive, PLANTS-BASEL, 10 (2021).

[31] N.B. Ramey, J.E. Coleman, P. Hakel, H.E. Morris, J. Colgan, J.E. Barefield, C.J. Fontes, R.M. Gilgenbach, R.D. McBride, Sodium tracer measurements of an expanded dense aluminum plasma from e-beam isochoric heating, PHYSICS OF PLASMAS, 28 (2021).

[32] N. Quach, I. Kim, J.-H. Chang, C. Lee, U.-B. Kang, J. Lee, Y. Won, Ieee, Fluorescence Microscopy Methodology for Visualizing Microscale Interfacial Defects In Packaging Materials, in:  PROCEEDINGS OF THE TWENTIETH INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM 2021), 2021, pp. 1154-1161.

[33] N. Poonnakasem, Effect of foaming and drying conditions on physicochemical properties and moisture kinetics of foam mat dried chili sauce powder during storage, JOURNAL OF FOOD PROCESSING AND PRESERVATION, 45 (2021).

[34] J. Patel, C.R. Sonar, S. Al-Ghamdi, Z. Tang, T. Yang, J. Tang, S.S. Sablani, Influence of ultra-high barrier packaging on the shelf-life of microwave-assisted thermally sterilized chicken pasta, LWT-FOOD SCIENCE AND TECHNOLOGY, 136 (2021).

[35] J. Park, H.-G. Hong, T.Y. Kwon, J.-K. Lee, Flexible Hybrid Approach for a 3D Integrated Physics Package of Chip-Scale Atomic Clocks, IEEE SENSORS JOURNAL, 21 (2021) 6839-6846.

[36] V. Navalkar, K.P. Singh, H. Shah, V. Mhatre, V. Risbud, Pre-flight evaluation of the soft X-ray telescope optics aboard AstroSat, JOURNAL OF ASTROPHYSICS AND ASTRONOMY, 42 (2021).

[37] H. Nakatani, T. Kyan, Y. Urakawa, Novel Recycling System of Polystyrene Water Debris with Polymer Photocatalyst and Thermal Treatment, JOURNAL OF POLYMERS AND THE ENVIRONMENT, 29 (2021) 1467-1476.

[38] I.E. Martins, T.A. Shittu, O.O. Onabanjo, A.D. Adesina, A.G. Soares, P.I. Okolie, A.O. Kupoluyi, O.A. Ojo, A.O. Obadina, Effect of packaging materials and storage conditions on the microbial quality of pearl millet sourdough bread, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 58 (2021).

[39] R.S. Li, M. van Zonneveld, Seed longevity of two nutrient-dense vegetables (Amaranthus spp.), SEED SCIENCE AND TECHNOLOGY, 49 (2021) 25-31.

[40] H. Lee, H. Park, E. Popova, Y.-Y. Lee, S.-U. Park, H.-H. Kim, AMMONIUM-FREE MEDIUM IS CRITICAL FOR REGENERATION OF SHOOT TIPS OF THE ENDANGERED SPECIES Pogostemon yatabeanus CRYOPRESERVED USING DROPLET-VITRIFICATION, CRYOLETTERS, 42 (2021) 290-299.

[41] D. Lee, Y. Son, Ultrasound-assisted soil washing processes using organic solvents for the remediation of PCBs-contaminated soils, ULTRASONICS SONOCHEMISTRY, 80 (2021).

[42] P. Kondzior, A. Butarewicz, Influence of Walls in a Container on the Growth of the Chlorella Vulgaris Algae, JOURNAL OF ECOLOGICAL ENGINEERING, 22 (2021) 98-108.

[43] T. Kim, J.H. Yang, S.J. Park, H.-Q. Nguyen, J. Kim, K.-J. Yee, H. Jung, J.-G. Kang, Y. Sohn, Photo-decontamination of chemical warfare dimethyl methylphosphonate, dimethyl phosphite, diethyl methylphosphonate, diethyl phosphite model molecules on Al and oxidized Al foils, APPLIED CATALYSIS B-ENVIRONMENTAL, 284 (2021).

[44] J.V. Kennedy, W.J. Trompetter, P.P. Murmu, J. Leveneur, P. Gupta, H. Fiedler, F. Fang, J. Futter, C. Purcell, Evolution of Rutherford's ion beam science to applied research activities at GNS Science, JOURNAL OF THE ROYAL SOCIETY OF NEW ZEALAND, 51 (2021) 574-591.

[45] S.A. Kedar, A.K. Bewoor, G. Murali, R. Kumar, M. Sadeghzadeh, A. Issakhov, Effect of Reflecting Material on CPC to Improve the Performance of Hybrid Groundwater Solar Desalination System, INTERNATIONAL JOURNAL OF PHOTOENERGY, 2021 (2021).

[46] Y. Jin, Y. Wang, D. Cheng, Simulation of the Impacts of Different Cooling Roofs on the Thermal Environment of Urban Blocks, Climatic and Environmental Research, 26 (2021) 91-105.

[47] X. Ji, W. Qin, X. Wu, Y. Wang, F. Gao, L. Wang, Y. Hou, Perfect metamaterial absorber improved laser-driven flyer, NANOPHOTONICS, 10 (2021) 2683-2693.

[48] H. Jamshidi, E. Budak, A 3D analytical thermal model in grinding considering a periodic heat source under dry and wet conditions, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 295 (2021).

[49] R. Gou, S. Yamashita, K. Sekine, H. Kita, Microstructural analysis of network-like crack structure formed at Al-B4C interface, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 41 (2021) 6962-6970.

[50] Y. Feng, K. Liu, B. Yu, C. Fu, T. Su, Y. Song, C. Wang, J. Yu, Z. Wang, Experimental study on preparation of low hydrogen chloride content and hydrogen- rich combustible gas by molten salt gasification of PVC, Journal of Safety and Environment, 21 (2021) 1727-1732.

[51] S. Dhiman, M. Ahmad, G. Kumar, V. Luxami, P. Singh, S. Kumar, Ratiometric chemosensor for differentiation of TNP from other NACs using distinct blue fluorescence and visualization of latent fingerprints, JOURNAL OF MATERIALS CHEMISTRY C, 9 (2021) 1097-1106.

[52] H.O.G. Dal, O. Gursoy, Y. Yilmaz, Use of ultrasound as a pre-treatment for vacuum cooling process of cooked broiler breasts, ULTRASONICS SONOCHEMISTRY, 70 (2021).

[53] S. Chaiwong, R. Saengrayap, J.M. Ogunsua, H. Kitazawa, C. Prahsarn, Performance of Different Bunch Cover Materials to Improve Quality of Cavendish Banana Cultivated during Winter and Summer in Thailand, AGRONOMY-BASEL, 11 (2021).

[54] M. Cabibbo, Skin effect in 125 to 10 mu m-thick 5N-Al foils, MATERIALS LETTERS, 282 (2021).

[55] O. Buken, K. Mancini, A. Sarkar, A sustainable approach to cathode delamination using a green solvent, RSC ADVANCES, 11 (2021) 27356-27368.

[56] Z. Bouza, J. Byers, J. Scheers, R. Schupp, Y. Mostafa, L. Behnke, Z. Mazzotta, J. Sheil, W. Ubachs, R. Hoekstra, M. Bayraktar, O.O. Versolato, The spectrum of a 1-mu m-wavelength-driven tin microdroplet laser-produced plasma source in the 5.5-265.5 nm wavelength range, AIP ADVANCES, 11 (2021).

[57] U. Biswas, A. Dutta, INFLUENCE OF PRE-SOWING SEED PRIMING AND PACKAGING MATERIALS ON THE QUALITY OF SESAME (Sesamum indicum L.) SEEDS, APPLIED BIOLOGICAL RESEARCH, 23 (2021) 389-395.

[58] Y. Bai, R. Essehli, C.J. Jafta, K.M. Livingston, I. Belharouak, Recovery of Cathode Materials and Aluminum Foil Using a Green Solvent, ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 9 (2021) 6048-6055.

[59] F. Bai, L. Wang, K. Yang, Z. He, G. Qi, J. Twiefel, Experimental Investigation of Peening Cylindrical Workpieces Utilizing a Transducer with Ring Sonotrode, APPLIED SCIENCES-BASEL, 11 (2021).

[60] S. Bagui, B.P. Sahu, K. Laha, S. Tarafder, R. Mitra, Creep Deformation Behavior of Inconel 617 Alloy in the Temperature Range of 650 degrees C to 800 degrees C, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 52 (2021) 94-107.

[61] M.E.H. Attia, Z. Driss, A.E. Kabeel, M. Abdelgaied, A.M. Manokar, R. Sathyamurthy, A.K. Hussein, Performance Evaluation of Modified Solar Still Using Aluminum Foil Sheet as Absorber Cover - A Comparative Study, JOURNAL OF TESTING AND EVALUATION, 49 (2021) 3565-3576.

[62] S.D. Astuti, S. Lestari, Erminawati, S. Widarni, G. Wijanarko, F.N. Wibawa, Iop, Shelf life prediction of carica seeds powder using accelerated method, in:  2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE AGRICULTURE FOR RURAL DEVELOPMENT 2020, 2021.

[63] S.B. Anoraga, A.R. Sari, J. Wikarta, I. Sabarisman, Iop, Preliminary study on the fermentation medium of the black garlic production, in:  INTERNATIONAL CONFERENCE ON SMART AND INNOVATIVE AGRICULTURE, 2021.

[64] M. Ahmad, G. Kumar, V. Luxami, S. Kaur, P. Singh, S. Kumar, Fluorescence imaging of surface-versatile latent fingerprints at the second and third level using double ESIPT-based AIE fluorophore, NEW JOURNAL OF CHEMISTRY, 45 (2021) 7705-7713.

[65] R. Zhang, F. Shan, C. Wang, C. Yan, S. Dong, Y. Xu, Z. Gong, C. Ma, Internode elongation pattern, internode diameter and hormone changes in soybean (Glycine max) under different shading conditions, CROP & PASTURE SCIENCE, 71 (2020) 679-688.

[66] J.R. Zarate-Salazar, L.M. de Souza, M.B. de Morais, L.P. Neto, L. Willadino, A. Gouveia-Neto, C. Ulisses, Light-emitting diodes and gas exchange facilitation minimize hyperhydricity in Lippia grata: Physiological, biochemical and morpho anatomical aspects, SOUTH AFRICAN JOURNAL OF BOTANY, 135 (2020) 164-171.

[67] F. Xiong, H. Yang, K. Liu, J. Man, H. Chen, Effect of imprinting times and stress annealing on warm laser shock imprinting, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 26 (2020) 353-366.

[68] Y. Xia, J. Wang, C. Gu, Y. Ling, Z. Gao, MnO2/Al foil decorated air cleaner with self-driven property for the abatement of indoor formaldehyde, CHEMICAL ENGINEERING JOURNAL, 382 (2020).

[69] S. Watanabe, S. Fukushi, T. Harada, M. Shimojima, T. Yoshikawa, T. Kurosu, Y. Kaku, S. Morikawa, M. Saijo, Effective inactivation of Nipah virus in serum samples for safe processing in low-containment laboratories, VIROLOGY JOURNAL, 17 (2020).

[70] X. Wang, M. Li, W. Zhu, Formation and homogenization of Si interconnects by non-equilibrium self-propagating exothermic reaction, JOURNAL OF ALLOYS AND COMPOUNDS, 817 (2020).

[71] M.-R. Wang, Z. Zhang, J. Zamecnik, A. Bilavcik, D.-R. Blystad, S. Haugslien, Q.-C. Wang, Droplet-vitrification for shoot tip cryopreservation of shallot (Allium cepa var. aggregatum): effects of PVS3 and PVS2 on shoot regrowth, PLANT CELL TISSUE AND ORGAN CULTURE, 140 (2020) 185-195.

[72] W. Tillmann, N.B. Anar, L. Wojarski, Mechanical behavior of reactive air brazed (RAB) Crofer 22 APU-Al2O3 joints at ambient temperature, SN APPLIED SCIENCES, 2 (2020).

[73] F. Shiraishi, M. Iwanaga, N. Kitagawa, F. Miyazaki, Enhancing the photocatalytic decomposition of acetaldehyde in air by immobilized titanium dioxide, JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, 95 (2020) 2034-2044.

[74] A.S. Shchukin, A.E. Sytschev, SHS Joining of Ta with NiAl: Structure of Transition Zone, INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS, 29 (2020) 131-132.

[75] S. Saha, K. Chandrashekar, L.R. Sonke, G.K. Mahapatro, Efficacy of rice straw mulch for the sustainable production and insect pest management in okra (Abelmoschus esculentus), INDIAN JOURNAL OF AGRICULTURAL SCIENCES, 90 (2020) 29-34.

[76] D. Saha, S.K. Nanda, D.N. Yadav, Shelf-life study of spray-dried groundnut milk powder, JOURNAL OF FOOD PROCESS ENGINEERING, 43 (2020).

[77] J. Patel, A. Parhi, S. Al-Ghamdi, C.R. Sonar, D.S. Mattinson, J. Tang, T. Yang, S.S. Sablani, Stability of vitamin C, color, and garlic aroma of garlic mashed potatoes in polymer packages processed with microwave-assisted thermal sterilization technology, JOURNAL OF FOOD SCIENCE, 85 (2020) 2843-2851.

[78] S. Pal, P. Bhattacharjee, Gamma irradiation of trilamellate packaged yellow corn (Zea mays) kernels enhances lutein content and shelf life, JOURNAL OF FOOD PROCESSING AND PRESERVATION, 44 (2020).

[79] P.R. Oliveira, M. May, T.H. Panzera, F. Scarpa, S. Hiermaier, Improved sustainable sandwich panels based on bottle caps core, COMPOSITES PART B-ENGINEERING, 199 (2020).

[80] V.K. Nadimpalli, G.M. Karthik, G.D. Janakiram, P.B. Nagy, Monitoring and repair of defects in ultrasonic additive manufacturing, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 108 (2020) 1793-1810.

[81] N.M. Murashova, S.Y. Levchishin, E.N. Subcheva, O.G. Krasnova, E.V. Yurtov, Chemical Polishing of Aluminum Using Acid-Containing Reverse Microemulsions, PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 56 (2020) 560-566.

[82] N. Munzenrieder, I. Shorubalko, L. Petti, G. Cantarella, B. Shkodra, T. Meister, K. Ishida, C. Carta, F. Ellinger, G. Troster, Focused ion beam milling for the fabrication of 160 nm channel length IGZO TFTs on flexible polymer substrates, FLEXIBLE AND PRINTED ELECTRONICS, 5 (2020).

[83] D. Mulyosari, Y.S. Hadi, E.N. Herliyana, G. Pari, R. Pari, I.B. Abdillah, Iop, Physical properties of furfurylated mangium (Acacia mangium Willd.) and pine (Pinus merkusii Jungh et de Vriese) woods, in:  INTERNATIONAL CONFERENCE ON FOREST PRODUCTS (ICFP) 2020: 12TH INTERNATIONAL SYMPOSIUM OF IWORS, 2020.

[84] Y.A. Martins, M.J.V. Fonseca, T.Z. Pavan, R.F.V. Lopez, Bifunctional Therapeutic Application of Low-Frequency Ultrasound Associated with Zinc Phthalocyanine-Loaded Micelles, INTERNATIONAL JOURNAL OF NANOMEDICINE, 15 (2020) 8075-8095.

[85] Z. Marcinkevics, D. Briljonoks, H. Kronberga, J. Spigulis, LED-bed therapy of cardiovascular disorders: a volunteer study, in:  MECHANISMS OF PHOTOBIOMODULATION THERAPY XV, 2020.

[86] A.I. Machado, R. Fragoso, A.V. Dordio, E. Duarte, Performance of Iris pseudacorus and Typha domingensis for furosemide removal in a hydroponic system, INTERNATIONAL JOURNAL OF PHYTOREMEDIATION, 22 (2020) 863-871.

[87] Z. Liu, B. Wen, L. Cao, S. Zhang, Y. Lei, G. Zhao, L. Chen, J. Wang, Y. Shi, J. Xu, X. Pan, L. Yu, Photoelectric Cardiac Pacing by Flexible and Degradable Amorphous Si Radial Junction Stimulators, ADVANCED HEALTHCARE MATERIALS, 9 (2020).

[88] Y. Liu, Y. Lou, H. Yang, D. Zhou, Effects of silicate supply on the emissions of methane and nitrous oxide in paddy field under nighttime warming, Acta Ecologica Sinica, 40 (2020) 6621-6631.

[89] J. Liu, F. Jiang, M. Tang, B. Liu, Y. Sun, H. Zhang, Reduced residual stress and retained properties in Al-Zn-Mg-Cu alloys using a novel cladding quenching process, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 9 (2020) 7201-7209.

[90] T. Lippert, J. Bandelin, F. Schlederer, J.E. Drewes, K. Koch, Effects of ultrasonic reactor design on sewage sludge disintegration, ULTRASONICS SONOCHEMISTRY, 68 (2020).

[91] Y. Li, N. Peng, W. Shang, Y. Wen, Y. He, Optimization of Initiation Sites of Tunnel Pits on Aluminum Foil Using Self-Ordered Concave Structures, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 167 (2020).

[92] K. Li, Y.-C. Chiu, W. Jiang, L. Jones, X. Etienne, C. Shen, Comparing the Efficacy of Two Triple-Wash Procedures With Sodium Hypochlorite, a Lactic-Citric Acid Blend, and a Mix of Peroxyacetic Acid and Hydrogen Peroxide to Inactivate Salmonella, Listeria monocytogenes, and Surrogate Enterococcus faecium on Cucumbers and Tomatoes, FRONTIERS IN SUSTAINABLE FOOD SYSTEMS, 4 (2020).

[93] T.M. Jones, O.A. Oyatomi, B.O. Akinyele, A.C. Odiyi, M.T. Abberton, F.R. Hay, Effect of high temperature drying on seed longevity of Bambara groundnut (Vigna subterranea) accessions, SEED SCIENCE AND TECHNOLOGY, 48 (2020) 413-418.

[94] X. Jin, H. Wang, R. Xin, Y. Ma, G. Wu, T. Xu, X. Xia, S. Wang, R. Ma, An aggregation-induced emission luminogen combined with a cyanoacrylate fuming method for latent fingerprint analysis, ANALYST, 145 (2020) 2311-2318.

[95] N. Iqbal, M. Li, G. Gregory, S. Dahal, S. Bowden, K.O. Davis, Recombination and Resistive Losses of Transferred Foil Contacts for Silicon Heterojunction Solar Cells, PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS, 14 (2020).

[96] M. Humar, R. Repic, D. Krzisnik, B. Lesar, R.C. Korosec, C. Brischke, L. Emmerich, G. Rep, Quality Control of Thermally Modified Timber Using Dynamic Vapor Sorption (DVS) Analysis, FORESTS, 11 (2020).

[97] S.S. Hoffmann, J.P. Thyssen, J. Elberling, K.S. Hansen, J.D. Johansen, Children with vaccination granulomas and aluminum contact allergy: Evaluation of predispositions, avoidance behavior, and quality of lifeKey-words, CONTACT DERMATITIS, 83 (2020) 99-107.

[98] B.A. Haas, C. Floss, R.M. Stroud, R.C. Ogliore, FIB-TEM analysis of cometary material in 10 Stardust foil craters, METEORITICS & PLANETARY SCIENCE, 55 (2020) 1349-1370.

[99] O.V. Gusakova, V.G. Shepelevich, D.V. Alexandrov, I.O. Starodumov, Structure Formation in the Melt-Quenched Al-12.2Si-0.2Fe Alloys, RUSSIAN METALLURGY, 2020 (2020) 885-892.

[100] M. Gu, Y. Liu, F. Gan, Z. Yang, Q. Shen, Effect of aluminum foil baking on edible and nutritional quality of beef, Food and Fermentation Industries, 46 (2020) 136-141.

[101] K. Garasz, M. Kocik, Experimental Investigations on Laser Ablation of Aluminum in Sub-Picosecond Regimes, APPLIED SCIENCES-BASEL, 10 (2020).

[102] D. Friedrich, Consumer behaviour towards Wood-Polymer packaging in convenience and shopping goods: A comparative analysis to conventional materials, RESOURCES CONSERVATION AND RECYCLING, 163 (2020).

[103] K. Feng, J. An, W. Ren, X. Lei, G. Li, D. Rong, X. Wen, The synthesis of urchin-like gamma-Al2O3 hierarchical microspheres from Al foils and its rapid adsorption ability towards Congo red, MATERIALS RESEARCH EXPRESS, 7 (2020).

[104] N. El-anwar, E. Salem, G.Y. Mohamed, M. Abd El-Wahab, The effect of spin-parity configuration on the neutron capture reaction leading to isomeric state, RADIATION PHYSICS AND CHEMISTRY, 176 (2020).

[105] C.E. Duru, I.A. Duru, Mobility of aluminum and mineral elements between aluminum foil and bean cake (Moimoi) mediated by pH and salinity during cooking, SN APPLIED SCIENCES, 2 (2020).

[106] F. Dai, Z. Pei, X. Ren, S. Huang, J. Zhou, H. Pei, H. Gao, Surface dynamic deformation of LY2 aluminum alloy subjected to a laser shock wave planishing technique with different kinds of contacting foils, OPTICS AND LASER TECHNOLOGY, 126 (2020).

[107] D.C. Choi, H.S. Kim, Performance evaluation of laser shock micro-patterning process on aluminum surface with various process parameters and loading schemes, OPTICS AND LASERS IN ENGINEERING, 124 (2020).

[108] Y.-H. Cheng, C.-C. Lin, K.-L. Lin, Direct-bonded Al/Al2O3 using a transient eutectic liquid phase, INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 17 (2020) 1652-1660.

[109] A. Chatterjee, A.K. Jana, J.K. Basu, A novel synthesis of MIL-53(Al)@SiO2: an integrated photocatalyst adsorbent to remove bisphenol a from wastewater, NEW JOURNAL OF CHEMISTRY, 44 (2020) 18892-18905.

[110] R. Cassetta, M. Lehmann, M. Haytmyradov, R. Patel, A. Wang, L. Cortesi, D. Morf, D. Seghers, M. Surucu, H. Mostafavi, J.C. Roeske, Fast-switching dual energy cone beam computed tomography using the on-board imager of a commercial linear accelerator, PHYSICS IN MEDICINE AND BIOLOGY, 65 (2020).

[111] G.R. Cao, L.B. Qing, G.W. Ma, A Novel Approach for Measuring the Discontinuous Deformation Fields Based on the Digital Image Correlation Method, EXPERIMENTAL TECHNIQUES, 44 (2020) 497-507.

[112] N.R. Bressman, J.E. Hill, M.A. Ashley-Ross, Why did the invasive walking catfish cross the road? Terrestrial chemoreception described for the first time in a fish, JOURNAL OF FISH BIOLOGY, 97 (2020) 895-907.

[113] N.R. Bressman, J.E. Hill, M.A. Ashley-Ross, Why did the invasive walking catfish cross the road? Terrestrial chemoreception described for the first time in a fish (vol 97, pg 895, 2020), JOURNAL OF FISH BIOLOGY, 97 (2020) 1595-1595.

[114] C. Belver-Aguilar, S. Braccini, T.S. Carzaniga, A. Gsponer, P.D. Haeffner, P. Scampoli, M. Schmidt, A Novel Three-Dimensional Non-Destructive Beam-Monitoring Detector, APPLIED SCIENCES-BASEL, 10 (2020).

[115] A. Baratto-Roldan, M. del Carmen Jimenez-Ramos, S. Jimeno, P. Huertas, J. Garcia-Lopez, M. Isabel Gallardo, M. Antonio Cortes-Giraldo, J. Manuel Espino, Preparation of a radiobiology beam line at the 18 MeV proton cyclotron facility at CNA, PHYSICA MEDICA-EUROPEAN JOURNAL OF MEDICAL PHYSICS, 74 (2020) 19-29.

[116] E.A. Alisaraei, R. Hashemi, D. Rahmatabadi, C. Sommitsch, Experimental study of forming limit diagram and mechanical properties of aluminum foils processed by the accumulative roll bonding, MATERIALS RESEARCH EXPRESS, 7 (2020).

[117] F. Adzima, T. Balan, P.Y. Manach, Springback prediction for a mechanical micro connector using CPFEM based numerical simulations, INTERNATIONAL JOURNAL OF MATERIAL FORMING, 13 (2020) 649-659.

[118] D. Aditya, A.S. Rizky, T. Suprayogi, C.I. Yogihati, M. Diantoro, Sunaryono, S.M. Said, I.O.P. Publishing, The effect of Ag on thermoelectric performance of Cu1-xAgxS tetrahedrite/Al prepared using modified polyol methods, in:  9TH INTERNATIONAL CONFERENCE ON THEORETICAL AND APPLIED PHYSICS (ICTAP), 2020.

[119] T. Abe, D. Matsumoto, T. Nakayama, Y. Shimazaki, A. Sagara, D. Kanehira, T. Azechi, F. Sato, H. Sakai, T. Yumoto, J. Kamei, Effect of different shielding conditions on the stability of Cisplatin, JOURNAL OF PHARMACEUTICAL HEALTH CARE AND SCIENCES, 6 (2020).

[120] N. Abdolahi, E. Kaheh, R. Golsha, B. Khodabakhshi, A. Norouzi, M. Khandashpoor, S. Besharat, S. Tavassoli, S. Livani, S.A. Azimi, M.H. Gharib, B. Peivandi, A. Fazel, H. Shirzad-Aski, G. Roshandel, Letter to the editor: efficacy of different methods of combination regimen administrations including dexamethasone, intravenous immunoglobulin, and interferon-beta to treat critically ill COVID-19 patients: a structured summary of a study protocol for a randomized controlled trial, TRIALS, 21 (2020).

[121] D. Zagulyaev, S. Konovalov, V. Gromov, A. Melnikov, V. Shlyarov, Research into morphology and phase structure in the surface of Al-Si alloy modified by yttrium oxide, BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 67 (2019) 173-177.

[122] C. Yoon, B. Jeon, G. Yoon, A Feasibility Study of Fabrication of Piezoelectric Energy Harvesters on Commercially Available Aluminum Foil, ENERGIES, 12 (2019).

[123] Y. Yang, Q. Li, X. Jiang, C. Wei, Z. He, Q. Zeng, S. Chen, Effect of different chill-proof measures on fruit quality and input-output benefits in loquat, Journal of Fruit Science, 36 (2019) 755-764.

[124] X. Yang, E. Popova, M.R. Shukla, P.K. Saxena, Root cryopreservation to biobank medicinal plants: a case study for Hypericum perforatum L, IN VITRO CELLULAR & DEVELOPMENTAL BIOLOGY-PLANT, 55 (2019) 392-402.

[125] S. Xing, X. Fu, J. Fu, H. Min, Z. Chen, H. Xiong, G. Liu, J. Zhou, S. Wang, Effects of different packaging materials and airtight storage on storage quality of rapeseeds, Food and Fermentation Industries, 45 (2019) 166-170.

[126] K. Xiao, S. Chen, B. Yang, X. Zhao, G. Yu, C. Zhu, Simultaneous achievement of refractory pollutant removal and energy production in the saline wastewater treatment, CHEMICAL ENGINEERING JOURNAL, 369 (2019) 845-853.

[127] D. Tristantini, M.R. Ramadhan, A. Hanifah, Shelf Life Estimation of Anti-Atherosclerosis Herbs using ASLT: Critical Water Content and Sorption Isotherms Model, in:  4TH BIOMEDICAL ENGINEERING'S RECENT PROGRESS IN BIOMATERIALS, DRUGS DEVELOPMENT, HEALTH, AND MEDICAL DEVICES: PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM OF BIOMEDICAL ENGINEERING (ISBE) 2019, 2019.

[128] V.G. Shepelevich, I.A. Bushkevich, E. Wendler, I.I. Tashlykova-Bushkevich, Changes in the Structure and Microhardness of Rapidly Solidified Foils of Aluminum Alloy 1421 during Their Annealing, JOURNAL OF SURFACE INVESTIGATION, 13 (2019) 555-561.

[129] X. Shan, Cooking ways on composition of intramuscular phospholipid fatty acids of inra rabbit, CIENCIA RURAL, 49 (2019).

[130] R. Saengrayap, S. Chaiwong, J. Rattanakaran, Application of artificial neural network for 'Cavendish' banana maturity and chilling injury prediction, in:  INTERNATIONAL FORUM ON HORTICULTURAL PRODUCT QUALITY, 2019, pp. 29-34.

[131] T. Rahman, N.F. Sulaiman, E. Turmala, R.C.E. Andriansyah, R. Luthfiyanti, A. Triyono, Iop, Shelflife prediction of biscuits prepared from modified suweg (Amorphophallus campanulatus B) flour using Arrhenius model, in:  2ND INTERNATIONAL CONFERENCE ON NATURAL PRODUCTS AND BIORESOURCE SCIENCES - 2018, 2019.

[132] J. Patel, S. Al-Ghamdi, H. Zhang, R. Queiroz, J. Tang, T. Yang, S.S. Sablani, Determining Shelf Life of Ready-to-Eat Macaroni and Cheese in High Barrier and Oxygen Scavenger Packaging Sterilized via Microwave-Assisted Thermal Sterilization, FOOD AND BIOPROCESS TECHNOLOGY, 12 (2019) 1516-1526.

[133] J. Park, P. Bazylewski, V. Wong, H. Shah, G. Fanchini, Solvent-free growth of carbon dots by sputter-plasma assisted chemical vapour deposition over large areas, CARBON, 146 (2019) 28-35.

[134] M.D. Pahnekolayi, A. Tehranifar, L. Samiei, M. Shoor, Optimizing culture medium ingredients and micrografting devices can promote in vitro micrografting of cut roses on different rootstocks, PLANT CELL TISSUE AND ORGAN CULTURE, 137 (2019) 265-274.

[135] A. Ozturk, R. Seherli, A hybrid model for the prediction of aluminum foil output thickness in cold rolling process, TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES, 27 (2019) 1461-1476.

[136] M. Kurniadi, Y. Khasanah, A. Kusumaningrum, M. Angwar, D. Rachmawanti, N.H.R. Parnanto, L.D. Pratiwi, Iop, Formulation and Shelf Life Prediction of Cookies From Modified Cassava Flour (Mocaf) In Flexible Packaging, in:  2ND INTERNATIONAL CONFERENCE ON NATURAL PRODUCTS AND BIORESOURCE SCIENCES - 2018, 2019.

[137] P. Kourim, B. Chalupa, J. Zeman, VARIATION OF THE STERILISATION BOTTLE FOR SOLAR WATER DISINFECTION, in:  PROCEEDING OF 7TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2019, 2019, pp. 281-286.

[138] V. Klungboonkrong, B.P. Lamsal, S. Phoungchandang, Changes and degradation kinetics of some bioactive compounds in dried Orthosiphon aristatus (Java tea) leaves during elevated temperature storage, JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE, 99 (2019) 933-940.

[139] S.A. Kedar, K.A. Raj, A.K. Bewoor, Performance analysis of hybrid solar desalination system using ETC and CPC, SN APPLIED SCIENCES, 1 (2019).

[140] N. Kayin, D. Atalay, T.T. Akcay, H.S. Erge, Color stability and change in bioactive compounds of red beet juice concentrate stored at different temperatures, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 56 (2019) 5097-5106.

[141] P. Kaewsorn, K. Chotanakoon, P. Chulaka, W. Chanprasert, J. Chunthawodtiporn, Effects of hydropriming and osmopriming in germinability and storability of 'Bang Chang' pepper (Capsicum annuum L.) seeds, in:  INTERNATIONAL FORUM ON HORTICULTURAL PRODUCT QUALITY, 2019, pp. 45-52.

[142] M. Hussain, M. Sufyan, N. Abbas, H. Ahmad, F.M. Joyia, M. Noman, M.M. Ahsan, M.N. Raza, A. Razaq, M. Zulqernain, H. Ullah, M. Atif, Influence of laser processing conditions for texturing on ultra-high-molecular-weight-polyethylene (UHMWPE) surface, CASE STUDIES IN THERMAL ENGINEERING, 14 (2019).

[143] M. Gnedel, A. Zens, F. Haider, M.F. Zaeh, Iop, Mechanical dissolution of copper additions in aluminium by Friction Stir Processing, in:  21ST CHEMNITZ SEMINAR ON MATERIALS ENGINEERING, 2019.

[144] S.-W. Fu, C.C. Lee, New solid-state die-attach method using silver foil bonded on aluminum substrate by eutectic reaction, JOURNAL OF ALLOYS AND COMPOUNDS, 774 (2019) 1207-1215.

[145] L. Fu, D. Yin, T. Hu, S. Lu, Intermediary annealing process of AA8079 double-zero aluminum foil, Heat Treatment of Metals, 44 (2019) 18-21.

[146] K. Fisher, X. Meng, B. Hartweg, S. Mony, M. Bertoni, Z. Holman, Ieee, Novel Foil Interconnects for Back-Contact Silicon Solar Cells, in:  2019 IEEE 46TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2019, pp. 126-130.

[147] E. Denly, J. Occhialini, P. Bassignani, M. Eberle, N. Rabah, Per- and polyfluoroalkyl substances in environmental sampling products: Fact or fiction?, REMEDIATION-THE JOURNAL OF ENVIRONMENTAL CLEANUP COSTS TECHNOLOGIES & TECHNIQUES, 29 (2019) 65-76.

[148] F. Dai, J. Geng, X. Ren, S. Huang, J. Zhou, X. Hua, X. Chen, Surface roughness control of LY2 aluminum alloy milled surface subjected to laser shock wave planishing processing, APPLIED SURFACE SCIENCE, 486 (2019) 121-127.

[149] S. Chaiwong, R. Saengrayap, C. Prahsarn, Effects of different materials for banana bunch covers during winter in Thailand, in:  INTERNATIONAL FORUM ON HORTICULTURAL PRODUCT QUALITY, 2019, pp. 21-28.

[150] F. Celani, B. Ortenzi, A. Spallone, C. Lorenzetti, E. Purchi, S. Fiorilla, S. Cupellini, M. Nakamura, P. Boccanera, L. Notargiacomo, G. Vassallo, R. Burri, Steps to Identify Main Parameters for AHE Generation in Sub-micrometric Materials: Measurements by Isoperibolic and Air-flow Calorimetry, JOURNAL OF CONDENSED MATTER NUCLEAR SCIENCE, 29 (2019) 52-74.

[151] J.C. Bettoni, R. Bonnart, A.N. Shepherd, A.A. Kretzschmar, G.M. Volk, MODIFICATIONS TO A Vitis SHOOT TIP CRYOPRESERVATION PROCEDURE: EFFECT OF SHOOT TIP SIZE AND USE OF CRYOPLATES, CRYOLETTERS, 40 (2019) 103-112.

[152] A. Bahar, D.K. Suwardiah, Iop, Effect of Shelf Life on the Quality of Fried Sambal (Condiments of Instant Uduk Rice), in:  6TH INTERNATIONAL CONFERENCE ON SUSTAINABLE AGRICULTURE, FOOD AND ENERGY, 2019.

[153] G.M. Ayoub, L. Malaeb, Solar Water Disinfection: UV Radiation Transmittance of Various Solar Reactor Tubes, in:  TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY (TMREES), 2019, pp. 498-511.

[154] A.O. Akhmetov, G.S. Sorokoumov, A.A. Smolin, D.V. Bobrovsky, D.V. Boychenko, A.Y. Nikiforov, A.E. Shemyakov, E.D.S. Ieee, G. Reliabil, Proton Accelerator's Direct Ionization Single Event Upset Test Procedure, in:  2019 IEEE 31ST INTERNATIONAL CONFERENCE ON MICROELECTRONICS (MIEL 2019), 2019, pp. 107-110.

[155] Z. Zhou, L. Mo, H. Liu, Y.C. Chan, F. Wu, Study of Fusion Thickness of Tin Solder Heating by Self-Propagating Exothermic Reaction, JOURNAL OF ELECTRONIC MATERIALS, 47 (2018) 7435-7448.

[156] W.-J. Yu, H.-P. Liu, X.-W. Zhang, D. Dong, Y. Jiang, N.-X. Sun, Y.-K. Liu, J.-F. Yuan, Postirradiation changes of the microbiological quality, aflatoxin, capsinoids, volatile oils, and the color of red pepper powder, JOURNAL OF FOOD PROCESSING AND PRESERVATION, 42 (2018).

[157] X. Yin, J. Yu, Y. Wu, X. Tian, W. Wang, Y.-N. Zhang, T. Zuo, Reclamation and Harmless Treatment of Waste Cathode Ray Tube Phosphors: Novel and Sustainable Design, ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6 (2018) 4321-4329.

[158] Y. Wu, Y. Zhuang, Y. Pan, X. Lin, Effects of Silicon Content on Second-phase and Mechanical Properties of 1235Aluminum Foil, Special Casting & Nonferrous Alloys, 38 (2018) 1253-1256.

[159] J. Wu, J. Zhou, X. Meng, Abrasion Resistance Improvement of W6Mo5Cr4V2(M2) High-speed-steel Cutter Materials by Laser Shock Processing, Surface Technology, 47 (2018) 72-77.

[160] S. Wang, X. Yu, C. Liang, Y. Zhang, Enhanced condensation heat transfer in air-conditioner heat exchanger using superhydrophobic foils, APPLIED THERMAL ENGINEERING, 137 (2018) 758-766.

[161] R. Wang, P. Wu, Z. Zhang, B. Xu, Y. Hu, W. Zhu, J. Li, J. Chu, D. Wu, G. Li, High-quality microhole arrays by water-assisted femtosecond laser perforating for improved particle sorting, OPTICAL ENGINEERING, 57 (2018).

[162] W. Utto, R. Preutikul, P. Malila, A. Noomhorm, J.E. Bronlund, Delaying microbial proliferation in freshly peeled shallots by active packaging incorporating ethanol vapour-controlled release sachets and low storage temperature, FOOD SCIENCE AND TECHNOLOGY INTERNATIONAL, 24 (2018) 132-144.

[163] N. Umnyakova, M. Gandzhuntsev, To the determination of heat exchange conditions near the inner surface of walls with reflective thermal insulation from aluminium foil, in:  XXVII R-S-P SEMINAR, THEORETICAL FOUNDATION OF CIVIL ENGINEERING (27RSP) (TFOCE 2018), 2018.

[164] Y. Tuo, W. Chen, H. Zhang, P. Li, X. Liu, One-step hydrothermal method to fabricate drag reduction superhydrophobic surface on aluminum foil, APPLIED SURFACE SCIENCE, 446 (2018) 230-235.

[165] A. Toenjes, J. Kovac, B. Koehler, A. von Hehl, A. Mehner, B. Clausen, H.-W. Zoch, Process chain for the fabrication of hardenable aluminium-zirconium micro-components by deep drawing, in:  5TH INTERNATIONAL CONFERENCE ON NEW FORMING TECHNOLOGY (ICNFT 2018), 2018.

[166] I. Swaminathan, M. Guha, Protein-rich instant rice beverage mix and its quality attributes, JOURNAL OF FOOD PROCESSING AND PRESERVATION, 42 (2018).

[167] T. Stahl, S. Falk, H. Taschan, B. Boschek, H. Brunn, Evaluation of human exposure to aluminum from food and food contact materials, EUROPEAN FOOD RESEARCH AND TECHNOLOGY, 244 (2018) 2077-2084.

[168] M. Shekargoftar, J. Kelar, R. Krumpolec, J. Jurmanova, T. Homola, A Comparison of the Effects of Ambient Air Plasma Generated by Volume and by Coplanar DBDs on the Surfaces of PP/Al/PET Laminated Foil, IEEE TRANSACTIONS ON PLASMA SCIENCE, 46 (2018) 3653-3661.

[169] Y. Shan, H. Gao, X. Fang, W. Wu, Effects of Different Packaging Materials on Storage Quality of Strawberry Pulp, Food Science, 39 (2018) 251-257.

[170] P. Setiani, N. Watanabe, R.R. Sondari, N. Tsuchiya, Mechanisms and kinetic model of hydrogen production in the hydrothermal treatment of waste aluminum, MATERIALS FOR RENEWABLE AND SUSTAINABLE ENERGY, 7 (2018).

[171] V. Setiadi, The empowerment of sustainable design in food packaging as designer responsibilities, in:  4TH INTERNATIONAL SEMINAR ON SUSTAINABLE URBAN DEVELOPMENT, 2018.

[172] M.I. Saleh, H.J. Roven, T.I. Khan, T. Iveland, Transient Liquid Phase Bonding of Al-6063 to Steel Alloy UNS S32304, JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2 (2018).

[173] J. Riyanto, A.M.P. Nuhriawangsa, A. Pramono, S.D. Widyawati, D. Purnika, The Chemical Quality of Silverside Simental Ongole Crossbred Meat at Various Roasting Temperatures, in:  INTERNATIONAL CONFERENCE ON SCIENCE AND APPLIED SCIENCE (ICSAS) 2018, 2018.

[174] S. Pal, P. Bhattacharjee, Polypropylene-based packaging materials for shelf-life enhancement of yellow corn (Zea mays) kernels: Effects on lutein, aflatoxin content, sensory, and nutritional profiles, JOURNAL OF FOOD PROCESSING AND PRESERVATION, 42 (2018).

[175] M.J. Ortiz-Jerez, C.I. Ochoa-Martinez, Effect of hydrodrying conditions on shrinkage of pumpkin (Cucurbita maxima) pieces, INGENIERIA Y COMPETITIVIDAD, 20 (2018) 37-44.

[176] I.E. Obuh, V. Doychinov, D.P. Steenson, P. Akkaraekthalin, I.D. Robertson, N. Somjit, Low-Cost Microfabrication for MEMS Switches and Varactors, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 8 (2018) 1702-1710.

[177] D. Navami, R.B. Basavaraj, S.C. Sharma, B.D. Prasad, H. Nagabhushana, Rapid identification of latent fingerprints, security ink and WLED applications of CaZrO3:Eu3+ fluorescent labelling agent fabricated via bio-template assisted combustion route, JOURNAL OF ALLOYS AND COMPOUNDS, 762 (2018) 763-779.

[178] Y. Miao, T. Zhou, S. Shi, Y. Zhang, W. Kang, Effect of storage methods on the colonization quantity of endogenous rhizobia in alfalfa seeds, Grassland and Turf, 38 (2018) 13-18.

[179] Z. Meng, Z. Zhou, D. Zheng, L. Liu, J. Dong, Y. Yang, X. Li, T. Zhang, Optimizing dewaterability of drinking water treatment sludge by ultrasound treatment: Correlations to sludge physicochemical properties, ULTRASONICS SONOCHEMISTRY, 45 (2018) 95-105.

[180] A.F. Luhovskyi, I.A. Gryshko, A.I. Zilinskiy, B.V. Patsola, The Impact of Static Pressure on the Intensity of Ultrasonic Cavitation in Aqueous Media, JOURNAL OF WATER CHEMISTRY AND TECHNOLOGY, 40 (2018) 143-150.

[181] M. Li, H. Pan, Q. Zhu, Analysis on Surface Black Silk Defect in 1235 Cold-rolled Aluminum Alloy Plate, Nonferrous Metals Engineering, 8 (2018) 22-25.

[182] F. Li, X. Wang, W. Liu, L. Wang, G. Wang, One-step solvothermal synthesis of red emissive carbonized polymer dots for latent fingerprint imaging, OPTICAL MATERIALS, 86 (2018) 79-86.

[183] X. Jiang, S. Zhao, Y. Dang, Q. Zhang, P. Jiao, X.a. Pang, J. Chen, A study on the cryopreservation of almond buds by droplet-vitrification, Journal of Fruit Science, 35 (2018) 367-375.

[184] M. Isaenkova, Y. Perlovich, V. Fesenko, Y. Babich, M. Zaripova, N. Krapivka, Features of Structure Formation in the Low Modulus Quasi Single Crystal from Zr-25%Nb Alloy at Cold Rolling, in:  PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018), 2018.

[185] E. Inan-Eroglu, A. Gulec, A. Ayaz, Determination of aluminium leaching into various baked meats with different types of foils by ICP-MS, JOURNAL OF FOOD PROCESSING AND PRESERVATION, 42 (2018).

[186] J. Hu, T. Shimizu, T. Yoshino, T. Shiratori, M. Yang, Ultrasonic dynamic impact effect on deformation of aluminum during micro-compression tests, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 258 (2018) 144-154.

[187] J. Hu, T. Shimizu, M. Yang, Investigation on ultrasonic volume effects: Stress superposition, acoustic softening and dynamic impact, ULTRASONICS SONOCHEMISTRY, 48 (2018) 240-248.

[188] F. Hu, Y. Sun, M. Mei, C. Sang, J. Yang, Energy Levels, Radiative Rates, and Lifetimes for Transitions in Fe XIV, JOURNAL OF APPLIED SPECTROSCOPY, 85 (2018) 749-759.

[189] H.-C. Hou, Y.M. Banadaki, S. Basu, S. Sharifi, A Cost-Efficient Surface Enhanced Raman Spectroscopy (SERS) Molecular Detection Technique for Clinical Applications, JOURNAL OF ELECTRONIC MATERIALS, 47 (2018) 5378-5385.

[190] T. Hamaoka, M. Takeguchi, Displacement fields around Guinier-Preston 1 zones in Al-Cu alloys: investigations using MD and ADF-STEM image simulations, PHILOSOPHICAL MAGAZINE, 98 (2018) 2845-2860.

[191] S.-W. Fu, C.C. Lee, Ieee, Direct bonding silver to aluminum using eutectic reaction in air, in:  2018 IEEE 68TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2018), 2018, pp. 545-550.

[192] S.-W. Fu, C.C. Lee, Direct silver to aluminum solid-state bonding processes, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 722 (2018) 160-166.

[193] T. Fidelix, A. Czapkowski, S. Azjen, A. Andriolo, P. Horvath Neto, V. Trevisani, Low-level laser therapy for xerostomia in primary Sjogren's syndrome: a randomized trial, CLINICAL RHEUMATOLOGY, 37 (2018) 729-736.

[194] Y. Fang, S. Shimizu, T. Yamamoto, S. Komarov, Iop, Generation of OH Radical by Ultrasonic Irradiation in Batch and Circulatory Reactor, in:  2017 5TH INTERNATIONAL CONFERENCE ON ENVIRONMENT POLLUTION AND PREVENTION (ICEPP 2017), 2018.

[195] D. Dragnea, D. Gudovan, E. Zaharia, C.S. Bildea, The Treatment of Aluminium Pigments with Inorganic Polymers for Environment-Friendly Applications, REVISTA DE CHIMIE, 69 (2018) 3353-3360.

[196] Z. Ding, X. Xu, P. Thihongnhung, X. Hu, G. Nie, High adsorption performance for As(III) and As(V) onto novel aluminum-enriched biochar derived from abandoned Tetra Paks, CHEMOSPHERE, 208 (2018) 800-807.

[197] R.T. Daly, P.H. Schultz, Projectile preservation during oblique hypervelocity impacts, METEORITICS & PLANETARY SCIENCE, 53 (2018) 1364-1390.

[198] M. Dalui, A. Permogorov, H. Pahl, A. Persson, C.-G. Wahlstrom, Influence of micromachined targets on laser accelerated proton beam profiles, PLASMA PHYSICS AND CONTROLLED FUSION, 60 (2018).

[199] F. Dai, Z. Zhang, X. Ren, J. Lu, S. Huang, Effects of laser shock peening with contacting foil on micro laser texturing surface of Ti6Al4V, OPTICS AND LASERS IN ENGINEERING, 101 (2018) 99-105.

[200] H.-Y. Chen, J. Liu, C. Pan, J.-W. Yu, Q.-C. Wang, In vitro regeneration of adventitious buds from leaf explants and their subsequent cryopreservation in highbush blueberry, PLANT CELL TISSUE AND ORGAN CULTURE, 134 (2018) 193-204.

[201] M. Cao, Z. Sun, G. Bin, Q. Xia, L. Li, J. Li, H. Li, Preparation of Low Temperature Expandable Microspheres and Its Application in Foaming Ink, in:  APPLIED SCIENCES IN GRAPHIC COMMUNICATION AND PACKAGING, 2018, pp. 697-707.

[202] W.-L. Bi, X.-Y. Hao, Z.-H. Cui, G.M. Volk, Q.-C. Wang, Droplet-vitrification cryopreservation of in vitro-grown shoot tips of grapevine (Vitis spp.), IN VITRO CELLULAR & DEVELOPMENTAL BIOLOGY-PLANT, 54 (2018) 590-599.

[203] W.-L. Bi, X.-Y. Hao, Z.-H. Cui, R. Pathirana, G.M. Volk, Q.-C. Wang, Shoot tip cryotherapy for efficient eradication of grapevine leafroll-associated virus-3 from diseased grapevine in vitro plants, ANNALS OF APPLIED BIOLOGY, 173 (2018) 261-270.

[204] S. Berezin, A. Shatsov, O. Terenina, Formation of the Structure and Properties of Low-carbon Martensite During Quenching, OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 20 (2018) 144-159.

[205] Y. Zhang, Y. Lou, H. Zhu, S. Zhao, Y. Shi, Impacts of Night Warming on Rice Growth, Physiological Properties and Yield Components, Chinese Journal of Agrometeorology, 38 (2017) 88-95.

[206] D. Zhang, Z. Wei, L. Yu, Easily fabricated and recyclable Pd&Cu@Al catalyst for gram-scale phosphine-free Heck reactions with high TON, SCIENCE BULLETIN, 62 (2017) 1325-1330.

[207] A. Yamasaki, H. Yakushiji, H. Iwamoto, A. Azuma, H. Sugiura, Optimum Conditions for On-tree Ethanol-sticker Treatment for Astringency Removal in 'Taigetsu' and 'Taiten' Persimmons, HORTICULTURE JOURNAL, 86 (2017) 463-469.

[208] J. Wu, J. Zhou, X. Meng, Effects of Laser Shock Processing on Surface Properties of W6Mo5Cr4V2 High-Speed Steel, Surface Technology, 46 (2017) 232-237.

[209] R. Wei, X. Wang, C. Chen, X. Zhang, X. Xu, S. Du, Effect of surface treatment on the interfacial adhesion performance of aluminum foil/CFRP laminates for cryogenic propellant tanks, MATERIALS & DESIGN, 116 (2017) 188-198.

[210] L.-Y. Wang, Y.-D. Li, H.-Y. Sun, H.-G. Liu, X.-D. Tang, Q.-C. Wang, Z.-D. Zhang, An efficient droplet-vitrification cryopreservation for valuable blueberry germplasm, SCIENTIA HORTICULTURAE, 219 (2017) 60-69.

[211] O.I. Ucar, A.E. Mese, O. Birbasar, M. Dundar, D. Ozdemir, Determination of Aluminum Oxide Thickness on the Annealed Surface of 8000 Series Aluminum Foil by Fourier Transform Infrared Spectroscopy, in:  LIGHT METALS 2017, 2017, pp. 273-278.

[212] C. Tu, C.-L. Liu, M.-S. Lee, W. Hsu, Ieee, Passive and Wireless Strain Sensor based on LC Circuit with Lamination Fabrication, in:  2017 IEEE 12TH INTERNATIONAL CONFERENCE ON NANO/MICRO ENGINEERED AND MOLECULAR SYSTEMS (NEMS), 2017, pp. 303-306.

[213] C. Tang, Modern plating technologies: Part I-Pretreatment: some cases, Electroplationg & Finishing, 36 (2017) 1317-1324.

[214] T. Sverak, P. Bulejko, O. Kristof, P. Kejik, J. Kalivoda, J. Horsky, Covering ability of aluminum pigments prepared by milling processes, POWDER TECHNOLOGY, 305 (2017) 396-404.

[215] T. Suzuki, S. Kuramoto, M. Endo, Q. Cui, Effect of Alloying Elements on Anneal-Hardening Behavior of Aluminum Alloy Foils, in:  LIGHT METALS 2017, 2017, pp. 427-432.

[216] X. Song, J. Zhang, W. Zhai, M. Taureza, S. Castagne, A. Danno, Numerical and Experimental Study of Micro Single Point Incremental Forming Process, in:  INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, pp. 825-830.

[217] M. Slapakova, B. Krivska, J. Bajer, O. Grydin, M. Cieslar, T. Ltd, Al-Mg-Sc ALLOYS PROCESSED BY EQUAL-CHANNEL ANGULAR PRESSING, in:  METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, pp. 1501-1506.

[218] P.C. Sharma, A. Gupta, K. Issar, EFFECT OF PACKAGING AND STORAGE ON DRIED APPLE POMACE AND FIBER EXTRACTED FROM POMACE, JOURNAL OF FOOD PROCESSING AND PRESERVATION, 41 (2017).

[219] S. Schreiber, G.D. Theodossiadis, M.F. Zaeh, Iop, Combustion synthesis of reactive nickel-aluminum particles as an innovative approach for thermal joining applications, in:  19TH CHEMNITZ SEMINAR ON MATERIALS ENGINEERING, 2017.

[220] K. Radil, C. DellaCorte, The Performance of PS400 Subjected to Sliding Contact at Temperatures from 260 to 927 degrees C, TRIBOLOGY TRANSACTIONS, 60 (2017) 957-964.

[221] R. Prakash, A.M. Hossain, U.N. Pal, N. Kumar, K. Khairnar, M.K. Mohan, Dielectric Barrier Discharge based Mercury-free plasma UV-lamp for efficient water disinfection, SCIENTIFIC REPORTS, 7 (2017).

[222] A. Ozturk, R. Seherli, Nonlinear Short-term Prediction of Aluminum Foil Thickness via Global Regressor Combination, APPLIED ARTIFICIAL INTELLIGENCE, 31 (2017) 568-592.

[223] E. Nosova, Y. Erisov, F. Grechnikov, Multi-cycle rolled aluminum alloy 3103 sandwiches: mechanical properties and stamp ability, in:  INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2017), 2017.

[224] S. Morita, J. Liang, M. Matsubara, M. Dhamrin, Y. Nishio, N. Shigekawa, Ieee, Electrical Properties of Al-Foil/4H-SiC Schottky Junctions Fabricated by Surface-Activated Bonding, in:  2017 5TH INTERNATIONAL WORKSHOP ON LOW TEMPERATURE BONDING FOR 3D INTEGRATION (LTB-3D), 2017, pp. 68-68.

[225] T. Monetta, A. Acquesta, F. Bellucci, A multifactor approach to evaluate the sealing of "smooth-wall" containers for food packaging, SURFACE & COATINGS TECHNOLOGY, 310 (2017) 33-37.

[226] K. Mielonen, M. Suvanto, T.A. Pakkanen, Curved hierarchically micro-micro structured polypropylene surfaces by injection molding, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 27 (2017).

[227] A. Martinez, J. Felix, Iop, Design, Construction, Test, Operation and Simulation of a Four Channel Cosmic Ray Detector, in:  31ST ANNUAL MEETING OF THE DIVISION OF PARTICLES AND FIELDS (DPYC) OF THE MEXICAN PHYSICAL SOCIETY, 2017.

[228] Y. Liu, C. Wang, B. Guo, D. Shan, M. Zhang, Softening effect of ultrasonic vibration on micro-blanking deformation behaviour of titanium foil, MICRO & NANO LETTERS, 12 (2017) 808-812.

[229] C. Liu, S. Yang, J. Li, H. Ni, X. Zhang, Solid-State Reaction Between Fe-Al-Ca Alloy and Al2O3-CaO-FeO Oxide During Heat Treatment at 1473 K (1200 A degrees C), METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 48 (2017) 1348-1357.

[230] R.-d. Li, T.-c. Yuan, X.-j. Liu, J.-w. Wang, H. Wu, F.-h. Zeng, X. Zhou, Microstructural evolution and sintering kinetics during spark plasma sintering of Fe and Al blended powder, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 27 (2017) 1594-1601.

[231] J. Li, I. Yaqub, M. Corfield, C.M. Johnson, Interconnect Materials Enabling IGBT Modules to Achieve Stable Short-Circuit Failure Behavior, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 7 (2017) 734-744.

[232] J. Jesus Benitez, J.A. Heredia-Guerrero, M. Antonio Cruz-Carrillo, M.J. Barthel, H. Elisabeth Knicker, A. Heredia, Insolubilization and thermal stabilization of a long-chain polyester by noncatalyzed melt-polycondensation synthesis in air, JOURNAL OF APPLIED POLYMER SCIENCE, 134 (2017).

[233] K.-B. Jang, S.-C. Lim, Y.-S. Song, S.-K. Park, K. Il Moon, S.-K. Hyun, J.S. Forrester, S. Mhin, Effect of Surface Activated Bonding on Adhesion Strength Between Al and Al2O3, NANOSCIENCE AND NANOTECHNOLOGY LETTERS, 9 (2017) 1217-1221.

[234] L.N. Huang, S. Cheng, Z. Yang, Z. Zhao, Z. Xie, S. Wei, Effects of Plant Growth Regulators on the Growth and Resistance Physiology of Banana Planting Big Seedlings, in:  PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON EDUCATION, MANAGEMENT, INFORMATION AND MECHANICAL ENGINEERING (EMIM 2017), 2017, pp. 575-581.

[235] H.-C. Hou, Y.M. Banadaki, S. Sharifi, Detection of Complex Molecular Samples by Low-Cost Surface Enhanced Raman Spectroscopy (SERS) Substrate, in:  NANOSENSORS, BIOSENSORS, INFO-TECH SENSORS AND 3D SYSTEMS 2017, 2017.

[236] D.J. Hoarty, N. Sircombe, P. Beiersdorfer, C.R.D. Brown, M.P. Hill, L.M.R. Hobbs, S.F. James, J. Morton, E. Hill, M. Jeffery, J.W.O. Harris, R. Shepherd, E. Marley, E. Magee, J. Emig, J. Nilsen, H.K. Chung, R.W. Lee, S.J. Rose, Modelling K shell spectra from short pulse heated buried microdot targets, HIGH ENERGY DENSITY PHYSICS, 23 (2017) 178-183.

[237] C.-Y. Ho, Hydrolytic reaction of waste aluminum foils for high efficiency of hydrogen generation, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 42 (2017) 19622-19628.

[238] T. Gigl, L. Beddrich, M. Dickmann, B. Rienaecker, M. Thalmayr, S. Vohburger, C. Hugenschmidt, Defect imaging and detection of precipitates using a new scanning positron microbeam, NEW JOURNAL OF PHYSICS, 19 (2017).

[239] A. Font, M. Victoria Borrachero, L. Soriano, J. Monzo, J. Paya, Geopolymer eco-cellular concrete (GECC) based on fluid catalytic cracking catalyst residue (FCC) with addition of recycled aluminium foil powder, JOURNAL OF CLEANER PRODUCTION, 168 (2017) 1120-1131.

[240] M.E. Fajardo, C.D. Molek, E.C. Fossum, Time-of-Flight Mass Spectrometry of Laser Exploding Foil Initiated PETN Samples, in:  SHOCK COMPRESSION OF CONDENSED MATTER - 2015, 2017.

[241] F.V. Duarte Souza, E. Kaya, L.d.J. Vieira, A.d.S. Souza, M.d.J. da Silva Carvalho, E.B. Santos, A.A. Cunha Alves, D. Ellis, Cryopreservation of Hamilin sweet orange [(Citrus sinensis (L.) Osbeck)] embryogenic calli using a modified aluminum cryo-plate technique, SCIENTIA HORTICULTURAE, 224 (2017) 302-305.

[242] Y. Du, G. Fan, Q. Wang, L. Geng, Synthesis Mechanism and Strengthening Effects of Laminated NiAl by Reaction Annealing, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A (2017) 168-177.

[243] C.L. Costuleanu, G. Ignat, O. Brezuleanu, G. Ungureanu, D. Robu, C.R. Vintu, E. Boghita, S. Brezuleanu, Rural and Urban Management of Toxic Aluminum Waste in Relation with Environmental Protection in Iasi County, REVISTA DE CHIMIE, 68 (2017) 2597-2600.

[244] F. Bradai, J. Almagro-Bastante, C. Sanchez-Romero, Cryopreservation of olive somatic embryos using the droplet-vitrification method: The importance of explant culture conditions, SCIENTIA HORTICULTURAE, 218 (2017) 14-22.

[245] S. Ahola, J. Lahdensivu, Long term monitoring of repaired external wall assembly, in:  11TH NORDIC SYMPOSIUM ON BUILDING PHYSICS (NSB2017), 2017, pp. 375-380.

[246] M. Ahmed, A. Radwan, Performance evaluation of new modified low-concentrator polycrystalline silicon photovoltaic/thermal systems, ENERGY CONVERSION AND MANAGEMENT, 149 (2017) 593-607.

[247] C. Zhang, L. Liang, J. Zhang, P. Zhang, Improvement of aluminum foil lubricating device in YB47 packer, Tobacco Science and Technology, 49 (2016) 84-87,93.

[248] H. Yu, L. Su, C. Lu, K. Tieu, H. Li, J. Li, A. Godbole, C. Kong, Enhanced mechanical properties of ARB-processed aluminum alloy 6061 sheets by subsequent asymmetric cryorolling and ageing, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 674 (2016) 256-261.

[249] W. Yang, G. Li, Z. Cao, H. Hui, Comparison on preservation effect of Nisin,phytic acid and packaging materials for pretreated duck meat, Food and Fermentation Industries, 42 (2016) 217-221.

[250] S. Xue, X. Xiao, Z. He, H. Li, Effect of Different Cooking Methods on the Composition of Intramuscular Fatty Acids of Hyla Rabbit, KOREAN JOURNAL FOR FOOD SCIENCE OF ANIMAL RESOURCES, 36 (2016) 178-185.

[251] H.J. Warner, W.D. Wagner, Fabrication of A Novel Elastomeric Substitute For Autologous Veins In Coronary Artery Bypass Surgery, FASEB JOURNAL, 30 (2016).

[252] H. Tan, X. Xiang, J. Tang, X. Wang, Nutritional functions of the funiculus in Brassica napus seed maturation revealed by transcriptome and dynamic metabolite profile analyses, PLANT MOLECULAR BIOLOGY, 92 (2016) 539-553.

[253] V.D. Sitdikov, P.S. Chizhov, M.Y. Murashkin, R.Z. Valiev, SIMULATION OF SMALL-ANGLE X-RAY SCATTERING CURVES TO DETERMINE THE SIZE, SHAPE AND DISTRIBUTION OF SECONDARY PHASES IN DYNAMICALLY AGED ALUMINUM ALLOY 6201, REVIEWS ON ADVANCED MATERIALS SCIENCE, 47 (2016) 59-65.

[254] H. Schulte-Huxel, J.-H. Petermann, S. Blankemeyer, V. Steckenreiter, S. Kajari-Schroeder, R. Brendel, Simultaneous contacting and interconnection of passivated emitter and rear solar cells, in:  PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS (SILICONPV 2016), 2016, pp. 515-522.

[255] C. Ros, T. Andreu, S. Giraldo, Y. Sanchez, J. Ramon Morante, Conformal chalcopyrite based photocathode for solar refinery applications, SOLAR ENERGY MATERIALS AND SOLAR CELLS, 158 (2016) 184-188.

[256] N.M. Ogarekpe, J.C. Agunwamba, Effect of geometry on the performance of integrated solar and hydraulic jump enhanced waste stabilization pond, DESALINATION AND WATER TREATMENT, 57 (2016) 24946-24959.

[257] S.N. Mohammad, VQS (vapor-quasiliquid-solid, vapor-quasisolid-solid) mechanism lays down general platform for the syntheses of graphene by chemical vapor deposition, JOURNAL OF APPLIED PHYSICS, 120 (2016).

[258] Y. Liu, J.T. Luo, C. Zhao, J. Zhou, S.A. Hasan, Y. Li, M. Cooke, Q. Wu, W.P. Ng, J.F. Du, Q. Yu, Y. Liu, Y.Q. Fu, Annealing Effect on Structural, Functional, and Device Properties of Flexible ZnO Acoustic Wave Sensors Based on Commercially Available Al Foil, IEEE TRANSACTIONS ON ELECTRON DEVICES, 63 (2016) 4535-4541.

[259] H. Liu, X. Sun, Z. Shen, C. Li, C. Sha, L. Li, S. Gao, Y. Ma, X. Wang, The size effect on deformation behavior in microscale laser shock flexible drawing, OPTICS AND LASER TECHNOLOGY, 86 (2016) 93-102.

[260] M.F. Koskinas, G. Polillo, F. Brancaccio, I.M. Yamazaki, M.S. Dias, Standardization of Fe-59 by 4 pi(PC)beta-gamma software coincidence system, APPLIED RADIATION AND ISOTOPES, 109 (2016) 386-388.

[261] P. Knyps, E. Dumiszewska, W. Kaszub, A. Przewloka, W. Strupinski, Epitaxial lift-off technology of GaAs multijunction solar cells, in:  ELECTRON TECHNOLOGY CONFERENCE 2016, 2016.

[262] A.H. Kinsey, K. Slusarski, K. Woll, D. Gibbins, T.P. Weihs, Effect of dilution on reaction properties and bonds formed using mechanically processed dilute thermite foils, JOURNAL OF MATERIALS SCIENCE, 51 (2016) 5738-5749.

[263] I.V. Kholodkov, N.V. Kholodkova, S.A. Smirnov, Heterogeneous recombination of oxygen atoms on an aluminum foil surface under low-temperature plasma conditions, HIGH TEMPERATURE, 54 (2016) 639-643.

[264] S.X. Jiang, G. Yuan, J. Huang, Q. Peng, Y. Liu, The effect of laser engraving on aluminum foil-laminated denim fabric, TEXTILE RESEARCH JOURNAL, 86 (2016) 919-932.

[265] D. Jang, M. Jue, H. Yoon, C. Kim, Catalytic decomposition of SiO2 by Fe and the effect of Cu on the behavior of released Si species, CURRENT APPLIED PHYSICS, 16 (2016) 93-100.

[266] H. Ichiura, S. Sakamoto, Y. Ohtani, Preparation of Release-Paper-Free, Pressure-Sensitive-Adhesive Paper Using an Interfacial Polymerization Reaction on the Paper Surface, INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 55 (2016) 961-966.

[267] B.H.M. Hussein, G.M. Khairy, R.M. Kamel, Fluorescence sensing of phosdrin pesticide by the luminescent Eu(III)- and Tb(III)-bis(coumarin-3-carboxylic acid) probes, SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY, 158 (2016) 34-42.

[268] P. Huczkowski, S.G. Gopalakrishnan, W. Nowak, H. Hattendorf, R. Iskandar, J. Mayer, W.J. Quadakkers, Effect of Zr Content on the Morphology and Emissivity of Surface Oxide Scales on FeCrAlY Alloys, ADVANCED ENGINEERING MATERIALS, 18 (2016) 711-720.

[269] T. Hollmer, W. Petry, A novel monolithic LEU foil target based on a PVD manufacturing process for Mo-99 production via fission, APPLIED RADIATION AND ISOTOPES, 118 (2016) 290-296.

[270] D. Han, T. Huang, Research on Heat Treatment Process of Aluminum Foil for Heat Exchanger of Air Conditioner, Hot Working Technology, 45 (2016) 230-232,236.

[271] Q. Gu, X. Yi, Z. Zhang, H. Yan, J. Shi, H. Zhang, Y. Wang, J. Shao, A facile method for simultaneous analysis of phytosterols, erythrodiol, uvaol, tocopherols and lutein in olive oils by LC-MS, ANALYTICAL METHODS, 8 (2016) 1373-1380.

[272] Y. Du, G. Fan, L. Geng, A study on the orientation inheritance in laminated NiAl produced by in situ reaction annealing, MICRON, 83 (2016) 42-47.

[273] K.V. Diaz-H, F. Cristancho, Effect of Sample Thickness on 511 keV Single Compton-Scattered Gamma Rays, in:  LATIN AMERICAN SYMPOSIUM ON NUCLEAR PHYSICS AND APPLICATIONS, 2016.

[274] K.D. Devi, S.K. Paul, J.K. Sahu, Study of sorption behavior, shelf life and colour kinetics of vacuum puffed honey powder at accelerated storage conditions, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 53 (2016) 2334-2341.

[275] A.F. Cruz, EFFECT OF LIGHT-EMITTING DIODES ON ARBUSCULAR MYCORRHIZAL FUNGI ASSOCIATED WITH BAHIAGRASS (Paspalum notatum Flugge) AND MILLET [Pennisetum glaucum (L.) R.Br], BIOAGRO, 28 (2016) 163-170.

[276] C.K. Chung, E. Cleator, A.M. Dumas, J.D. Hicks, G.R. Humphrey, P.E. Maligres, A.F. Nolting, N. Rivera, R.T. Ruck, M. Shevlin, A Synthesis of a Spirocyclic Macrocyclic Protease Inhibitor for the Treatment of Hepatitis C, ORGANIC LETTERS, 18 (2016) 1394-1397.

[277] P.-C. Chiang, C.-C. Lo, C.-Y. Lin, Y.-W. Chien, Effects of melatonin on lipid metabolism and circulating irisin in diet-induced obese Sprague-Dawley rats, FASEB JOURNAL, 30 (2016).

[278] M. Boehm, A. Lehmann, S. Motz, F. Uhlig, P.T. Grp, Fast SiPM Readout of the PANDA TOF Detector, JOURNAL OF INSTRUMENTATION, 11 (2016).

[279] A.E. Bildik, M.A. Hubbe, K.B. Gurboy, Alkyl ketene dimer (AKD) sizing of paper under simplified treatment conditions, TAPPI JOURNAL, 15 (2016) 545-552.

[280] T. Bacquart, J.H. Li, S.R. Guevara, M.A. Arribere, T. Gerganova, M. Sterckx, P. Schumacher, T.P.J. Linsinger, A novel route to produce a homogeneous certified reference material for k(0)-neutron activation analysis: Application to the certification of gold mass fraction in an Al-0.1% Au alloy, MICROCHEMICAL JOURNAL, 124 (2016) 159-166.

[281] J. Zrnik, S. Scheriau, R. Pippan, P. Slama, T. Ltd, STRUCTURE REFINEMENT BY SPD AND PROPERTIES RESPOND OF AA6082 ALUMINUM ALLOY, in:  METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, pp. 1233-1239.

[282] H. Zhang, L. Yin, S. Shi, X. Liu, Y. Wang, F. Wang, Facile and fast fabrication method for mechanically robust superhydrophobic surface on aluminum foil, MICROELECTRONIC ENGINEERING, 141 (2015) 238-242.

[283] Z. Yu, W. Song, L. Chen, Y. Park, B. Zhao, Q. Cong, Y.M. Jung, Simple immersion to prepare a Zn/Ag biomimetic superhydrophobic surface and exploring its applications on SERS, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 467 (2015) 224-232.

[284] M. Yin, S. Hong, Study on cryopreservation and genetic stability of embryogenic calli induced from Dioscorea bulbifera microtuber, Chinese Traditional and Herbal Drugs, 46 (2015) 2623-2631.

[285] S. Xue, Z. He, X. Xiao, H. Li, Variation in Intramuscular Total Lipids of Cooked Ira Rabbit During Cold Storage, Food Science, 36 (2015) 238-243.

[286] G.M. Volk, R. Bonnart, A. Shepherd, R.R. Krueger, R. Lee, Cryopreservation of Citrus for Long-Term Conservation, in:  XII INTERNATIONAL CITRUS CONGRESS - INTERNATIONAL SOCIETY OF CITRICULTURE, 2015, pp. 187-191.

[287] N. Tucher, J. Eisenlohr, H. Hauser, J. Benick, M. Graf, C. Mueller, M. Hermle, J.C. Goldschmidt, B. Blaesi, Crystalline silicon solar cells with enhanced light trapping via rear side diffraction grating, in:  5TH INTERNATIONAL CONFERENCE ON SILICON PHOTOVOLTAICS, SILICONPV 2015, 2015, pp. 253-262.

[288] H.T.X. Truong, M.J. Martinez, O.O. Ochoa, D.C. Lagoudas, AN INVESTIGATION ON HYBRID INTERFACE USING ON-LINE MONITORING EXPERIMENT AND FINITE ELEMENT ANALYSES, in:  20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015.

[289] Z. Sun, Z. Liu, T. Qiao, H. Zhou, Y. Sun, Y. Quan, Detection of PETN on Latent Fingerprint by Laser Confocal Micro-Raman Spectroscopy, Physical Testing and Chemical Analysis Part B: Chemical Analysis, 51 (2015) 6-10.

[290] W.-x. Qin, Q. Gong, M. Li, L.-x. Deng, L.-s. Mo, Y.-l. Li, Determination of Arsenic in Food Package Aluminum by Ultrasound Assisted Solid Phase Extraction/ICP-AES, SPECTROSCOPY AND SPECTRAL ANALYSIS, 35 (2015) 1043-1047.

[291] R. Pathirana, A. McLachlan, D. Hedderley, A. Carra, F. Carimi, B. Panis, Removal of Leafroll Viruses from Infected Grapevine Plants by Droplet Vitrification, in:  VIII INTERNATIONAL SYMPOSIUM ON IN VITRO CULTURE AND HORTICULTURAL BREEDING, 2015, pp. 491-498.

[292] Y. Ouyang, G.R.M. Duarte, B.L. Poe, P.S. Riehl, F.M. dos Santos, C.C.G. Martin-Didonet, E. Carrilho, J.P. Landers, A disposable laser print-cut-laminate polyester microchip for multiplexed PCR via infra-red-mediated thermal control, ANALYTICA CHIMICA ACTA, 901 (2015) 59-67.

[293] C. Moussa, F. Desevedavy, H. Noel, M. Pasturel, F. Gouttefangeas, S. Dubois, B. Stepnik, O. Tougait, Experimental investigation of the U-Zr-Al ternary phase diagram: Isothermal sections at 673 K and 1073 K, JOURNAL OF NUCLEAR MATERIALS, 461 (2015) 193-199.

[294] R. Menon, P.Y. Nabhiraj, High speed micro-fabrication using inductively coupled plasma ion source based focused ion beam system, VACUUM, 111 (2015) 166-169.

[295] H. Li, H. Chen, X. Li, W. Duan, Degradation of VIP barrier envelopes exposed to alkaline solution at different temperatures, ENERGY AND BUILDINGS, 93 (2015) 208-216.

[296] M. Kilinc, S. Canbolat, C. Eyupoglu, D. Kut, The Evaluation with Statistical Analyses of the Effect of Different Storage Condition and Type of Gas on the Properties of Plasma Treated Cotton Fabrics, in:  WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP, 2015, pp. 2170-2176.

[297] J.-F. Jue, T.L. Trowbridge, C.R. Breckenridge, G.A. Moore, M.K. Meyer, D.D. Keiser, Jr., Effects of heat treatment On U-Mo fuel foils with a zirconium diffusion barrier, JOURNAL OF NUCLEAR MATERIALS, 460 (2015) 153-159.

[298] H. Ji, L. Li, M. Li, Low-temperature joining of Fe-based amorphous foil with aluminum by ultrasonic-assisted soldering with Sn-based fillers, MATERIALS & DESIGN, 84 (2015) 254-260.

[299] J. Hensen, R. Niepelt, S. Kajari-Schroeder, R. Brendel, Directional Heating and Cooling for Controlled Spalling, IEEE JOURNAL OF PHOTOVOLTAICS, 5 (2015) 195-201.

[300] C. Gisbert, M. Dabauza, E. Correal, R. Swennen, B. Panis, Cryopreservation of Bituminaria bituminosa varieties and hybrids, CRYOBIOLOGY, 71 (2015) 279-285.

[301] J.-T. Gau, H. Gu, X. Liu, K.-M. Huang, B.-T. Lin, Forming micro channels on aluminum foils by using flexible die forming process, JOURNAL OF MANUFACTURING PROCESSES, 19 (2015) 102-111.

[302] A. Gandhi, N. Bhatnagar, Significance of Ultrasonic Cavitation Field Distribution in Microcellullar Foaming of Polymers, CELLULAR POLYMERS, 34 (2015) 1-14.

[303] Y. Feng, Y. Ye, Z. Lian, T. Xuan, Experimental Research on Effect of Surface Quality of Copper Treated by Laser Shock Peening, Laser & Optoelectronics Progress, 52 (2015) 101401-101401-101401-101407.

[304] D.G. Eskin, K. Al-Helal, I. Tzanakis, Application of a plate sonotrode to ultrasonic degassing of aluminum melt: Acoustic measurements and feasibility study, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 222 (2015) 148-154.

[305] K.A.J. Doherty, J.G. Carton, A. Norman, T. McCaul, B. Twomey, K.T. Stanton, A thermal control surface for the Solar Orbiter, ACTA ASTRONAUTICA, 117 (2015) 430-439.

[306] M. Colina, A.B. Morales-Vilches, C. Voz, I. Martin, P.R. Ortega, R. Alcubilla, Low Surface Recombination in Silicon-Heterojunction Solar Cells With Rear Laser-Fired Contacts From Aluminum Foils, IEEE JOURNAL OF PHOTOVOLTAICS, 5 (2015) 805-811.

[307] G. Chassaing, A. Pougis, S. Philippon, P. Lipinski, L. Faure, J. Meriaux, K. Demmou, A. Lefebvre, Experimental and numerical study of frictional heating during rapid interactions of a Ti6Al4V tribopair, WEAR, 342 (2015) 322-333.

[308] I. Castro-Gonzalez, A. Gabriela Maafs-Rodriguez, F. Perez-Gil Romo, Effect of six different cooking techniques in the nutritional composition of two fish species previously selected as optimal for renal patient's diet, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 52 (2015) 4196-4205.

[309] A. Castro, C. Vilarinho, J. Araujo, J. Carvalho, Asme, RECOVERY OF PAPER FIBERS FROM TETRAPAK (R) PACKAGING: MATERIAL AND ENERGETIC VALORIZATION OF THE REMAINING FRACTION, in:  PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 14, 2015.

[310] H. Bahrami-Motlagh, H. Hassanian-Moghaddam, B. Behnam, M. Arab-Ahmadi, Failure of surgical treatment in methamphetamine body-stuffers, JOURNAL OF FORENSIC AND LEGAL MEDICINE, 32 (2015) 70-72.

[311] Y.-b. Zuo, X. Fu, J.-z. Cui, X.-y. Tang, L. Mao, L. Li, Q.-f. Zhu, Shear deformation and plate shape control of hot-rolled aluminium alloy thick plate prepared by asymmetric rolling process, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 24 (2014) 2220-2225.

[312] X. Zhou, Y. Yue, G. Tan, G. Yang, H. He, Study on Effect of AlFeSi Phase on Bubble Formation Mechanism of 8011 Aluminum Foil Blanks After Annealing, Hot Working Technology, 43 (2014) 172-174.

[313] C. Zheng, A. Gentils, J. Ribis, O. Kaitasov, V.A. Borodin, M. Descoins, D. Mangelinck, The feasibility of Al-based oxide precipitation in Fe-10%Cr alloy by ion implantation, PHILOSOPHICAL MAGAZINE, 94 (2014) 2937-2955.

[314] L. Zhang, Y. Wang, Z. Zhou, G. Li, M. Fu, S. Zhang, H. Yin, S. Zhang, B. Ren, Effects of Ovariectomy on Serum GH Levels and Expression of GHR in Some Tissues of Female Goats, Scientia Agricultura Sinica, 47 (2014) 199-208.

[315] Z.-F. Yin, W.-L. Bi, L. Chen, B. Zhao, G.M. Volk, Q.-C. Wang, An efficient, widely applicable cryopreservation of Lilium shoot tips by droplet vitrification, ACTA PHYSIOLOGIAE PLANTARUM, 36 (2014) 1683-1692.

[316] Z. Yin, L. Chen, W. Bi, Q.C. Wang, G.M. Volk, Somatic Embryogenesis and Organogenesis from Cryopreserved Shoot Tips of Lilium Oriental Hybrid 'Siberia', in:  II INTERNATIONAL SYMPOSIUM ON PLANT CRYOPRESERVATION, 2014, pp. 193-200.

[317] L. Yao, J. Liu, S. Li, M. Yu, Effects of prior cathodic polarization on crystallographic pit initiation on aluminum, CORROSION SCIENCE, 80 (2014) 12-18.

[318] G. Xin, H. Sun, T. Hu, H.R. Fard, X. Sun, N. Koratkar, T. Borca-Tasciuc, J. Lian, Large-Area Freestanding Graphene Paper for Superior Thermal Management, ADVANCED MATERIALS, 26 (2014) 4521-+.

[319] Y. Wang, X. Li, H. Hu, G. Liu, M. Rabnawaz, Hydrophilically patterned superhydrophobic cotton fabrics and their use in ink printing, JOURNAL OF MATERIALS CHEMISTRY A, 2 (2014) 8094-8102.

[320] T. Wakao, T. Gunji, A.J. Jeevagan, Y. Mochizuki, S. Kaneko, K. Baba, M. Watanabe, Y. Kanda, K. Murakami, M. Omura, G. Kobayashi, F. Matsumoto, Stable Charge/Discharge Cycle Performance of a LiFePO4 Cathode Prepared With a Carboxymethyl Cellulose Binder, in:  STUDENT POSTERS (GENERAL) - 224TH ECS MEETING, 2014, pp. 19-25.

[321] Y. Sun, Y. Chen, X. Lin, H. Su, X. He, Study of strengthening and toughening treatment methods in ODS FeCrAl foil fabricated by EBPVD, MATERIALS RESEARCH INNOVATIONS, 18 (2014) 265-269.

[322] W. Sun, X. Li, K. Hokamoto, Fabrication of graded density impactor via underwater shock wave and quasi-isentropic compression testing at two-stage gas gun facility, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 117 (2014) 1941-1946.

[323] S.K. Sra, K.S. Sandhu, P. Ahluwalia, Effect of treatments and packaging on the quality of dried carrot slices during storage, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 51 (2014) 645-654.

[324] R. Sarkar, P. Ghosal, K.S. Prasad, T.K. Nandy, K.K. Ray, An FCC phase in a metastable beta-titanium alloy, PHILOSOPHICAL MAGAZINE LETTERS, 94 (2014) 311-318.

[325] A. Ruzaike, S. Muizniece-Brasava, L. Dukalska, PACKAGING MATERIAL AND STORAGE-INDUCED QUALITY CHANGES IN FLEXIBLE RETORT POUCH POTATOES' PRODUCE, in:  9TH BALTIC CONFERENCE ON FOOD SCIENCE AND TECHNOLOGY - FOOD FOR CONSUMER WELL-BEING: FOODBALT 2014, 2014, pp. 217-222.

[326] M. Rahimi, P. Fojan, L. Gurevich, A. Afshari, Effects of aluminium surface morphology and chemical modification on wettability, APPLIED SURFACE SCIENCE, 296 (2014) 124-132.

[327] V.V.S. Prasad, S. Khaple, R.G. Baligidad, Melting, Processing, and Properties of Disordered Fe-Al and Fe-Al-C Based Alloys, JOM, 66 (2014) 1785-1793.

[328] E.L. Pereira, C.M. Montenegro Campos, C.S. Neves, R.B. Vilas Boas, Sterilization of swine wastewater treated by anaerobic reactors using UV photo-reactors, ACTA SCIENTIARUM-TECHNOLOGY, 36 (2014) 607-615.

[329] F. Olofson, L. Holmlid, Time-of-flight of He ions from laser-induced processes in ultra-dense deuterium D(0), INTERNATIONAL JOURNAL OF MASS SPECTROMETRY, 374 (2014) 33-38.

[330] B.P. Mishra, G. Chauhan, S.K. Mendiratta, P.K. Rath, Storage stability of vacuum packaged extended dehydrated chicken meat rings at ambient temperature, INDIAN JOURNAL OF ANIMAL SCIENCES, 84 (2014) 1222-1227.

[331] I.J. Micheal, A.J. Vidyasagar, K.K. Bokara, N.K. Mekala, A. Asthana, C.M. Rao, Foil assisted replica molding for fabrication of microfluidic devices and their application in vitro, LAB ON A CHIP, 14 (2014) 3695-3699.

[332] M. Meghwal, T.K. Goswami, Effect of grinding methods and packaging materials on fenugreek and black pepper powder quality and quantity under normal storage conditions, INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING, 7 (2014) 106-113.

[333] C.-S. Liang, Z.-F. Lv, Y.-L. Zhu, S.-A. Xu, Molybdate-based conversion treatment for improving the peeling strength between aluminum foil and polypropylene grafted with glycidyl methacrylate, SURFACE & COATINGS TECHNOLOGY, 249 (2014) 1-5.

[334] F. Jalali, R. Afshari, A. Babaei, Smoking Crushed Hyoscine/Scopolamine Tablets as Drug Abuse, SUBSTANCE USE & MISUSE, 49 (2014) 793-797.

[335] P. Huo, J. Li, S. Shi, S. Zhang, Effect of Seed Ultra-Drying Storage on Growth and Resistance of the Medicago sativa Seedlings Affected by Alkaline Salt Stress, Scientia Agricultura Sinica, 47 (2014) 2643-2651.

[336] K. Hiramoto, Y. Yamate, D. Sugiyama, Y. Takahashi, E. Mafune, Tranexamic acid suppresses ultraviolet B eye irradiation-induced melanocyte activation by decreasing the levels of prohormone convertase 2 and alpha-melanocyte-stimulating hormone, PHOTODERMATOLOGY PHOTOIMMUNOLOGY & PHOTOMEDICINE, 30 (2014) 302-307.

[337] F. Hernandez-Ramirez, M.T. Gonzalez-Arnao, C.A. Cruz-Cruz, M.C. Pastelin-Solano, F. Engelmann, Comparison of Different Preconditioning and Loading Treatments with Vanilla (Vanilla planifolia Jack.) Apices Cryopreserved Using the Droplet-Vitrification Procedure, in:  II INTERNATIONAL SYMPOSIUM ON PLANT CRYOPRESERVATION, 2014, pp. 173-180.

[338] Q. Dai, D. Zhang, X. Chen, J. Dong, F. Pan, Research on pinholes in aluminum foil, in:  BIOTECHNOLOGY, CHEMICAL AND MATERIALS ENGINEERING III, PTS 1 AND 2, 2014, pp. 308-+.

[339] J.P. Cordova, S. Balan, J. Romero, A. Korniyenko, C.L. Alviar, A. Paniz-Mondolfi, R. Jean, 'Chasing the Dragon' : New Knowledge for an Old Practice, AMERICAN JOURNAL OF THERAPEUTICS, 21 (2014) 52-55.

[340] B.H. Carter, T.H. Friend, S.M. Garey, J.A. Sawyer, M.B. Alexander, M.A. Tomazewski, Efficacy of reflective insulation in reducing heat stress on dairy calves housed in polyethylene calf hutches, INTERNATIONAL JOURNAL OF BIOMETEOROLOGY, 58 (2014) 51-59.

[341] P. Bouzika, H. Lin, Y. Yan, Y. Hu, A. Atik, J.W. Miller, E.S. Gragoudas, D.G. Vavvas, Verteporfin Without Photodynamic Therapy: Effect of the Photosensitizer on Ocular Cell Lines, INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE, 55 (2014).

[342] N.D. Boscher, V. Vache, P. Carminati, P. Grysan, P. Choquet, A simple and scalable approach towards the preparation of superhydrophobic surfaces - importance of the surface roughness skewness, JOURNAL OF MATERIALS CHEMISTRY A, 2 (2014) 5744-5750.

[343] A. Assmann, H.W. Reinhardt, Tensile creep and shrinkage of SAP modified concrete, CEMENT AND CONCRETE RESEARCH, 58 (2014) 179-185.

[344] E. Andreasson, S. Kao-Walter, P. Stahle, Micro-mechanisms of a laminated packaging material during fracture, ENGINEERING FRACTURE MECHANICS, 127 (2014) 313-326.

[345] A.A. Alsadon, M.T. Sadder, A.A.M. Ali, Cryopreservation of Wild Bitter Apple (Citrullus colocynthis L.) Seeds, in:  II INTERNATIONAL SYMPOSIUM ON PLANT CRYOPRESERVATION, 2014, pp. 281-288.

[346] X. Zhou, H. Yan, C. He, M. Lu, R. Hao, Comparison of Surface-Enhanced Raman Scattering Spectra of Azo Dye Sudan III on Several Substrates, SPECTROSCOPY LETTERS, 46 (2013) 615-619.

[347] L.-J. Yang, D.-L. Jan, W.-C. Lin, Steel-based bionic actuators for flapping microair-vehicles, MICRO & NANO LETTERS, 8 (2013) 686-690.

[348] L. Wang, G. Cao, E. Guo, G. Wang, X. Lu, Influences of different degassing processes on refining effect and properties of 4004 Al alloy, CHINA FOUNDRY, 10 (2013) 104-107.

[349] R. von Bargen, A. von Hehl, H.-W. Zoch, Artificial Ageing Behaviour of Al-4Zr Micro Sheets, in:  LIGHT METALS TECHNOLOGY 2013, 2013, pp. 456-460.

[350] F. Tietz, T. Wegener, M.T. Gerhards, M. Giarola, G. Mariotto, Synthesis and Raman micro-spectroscopy investigation of Li7La3Zr2O12, SOLID STATE IONICS, 230 (2013) 77-82.

[351] P. Taheri, J.R. Flores, F. Hannour, J.H.W. de Wit, H. Terryn, J.M.C. Mol, In Situ Study of Buried Interfacial Bonding Mechanisms of Carboxylic Polymers on Zn Surfaces, JOURNAL OF PHYSICAL CHEMISTRY C, 117 (2013) 3374-3382.

[352] J. Sun, C. Ao, H. Zhang, K. Wang, Study on the Measuring Method of Aluminum Foil for Ultrasonic Cleaning Machine, in:  INTERNATIONAL CONFERENCE ON GRAPHIC AND IMAGE PROCESSING (ICGIP 2012), 2013.

[353] J. Stone, D. Johnstone, J. Mitrofanis, The helmet experiment in Parkinson's disease: an observation of the mechanism of neuroprotection by near infra-red light, in:  PROCEEDINGS OF THE 9TH WORLD ASSOCIATION FOR LASER THERAPY CONGRESS (WALT), 2013, pp. 17-20.

[354] P. Sophanodora, S. Kaewjit, Changes in Quality of Liquid Smoked-Seasoned Oyster During Storage, CHIANG MAI JOURNAL OF SCIENCE, 40 (2013) 540-545.

[355] S. Schmitz, W. Loeser, H. Klauss, C. Mickel, B. Buechner, Effects of Re microalloying on glass formation and mechanical properties of Zr-Cu-Al alloys, PHILOSOPHICAL MAGAZINE, 93 (2013) 847-857.

[356] D.L. Ringus, C.I. Moraru, Pulsed Light inactivation of Listeria innocua on food packaging materials of different surface roughness and reflectivity, JOURNAL OF FOOD ENGINEERING, 114 (2013) 331-337.

[357] S.d.P. Quintao Scalon, A.M. Oshiro, T.E. Masetto, D.M. Dresch, CONSERVATION OF Campomanesia adamantium (CAMB.) O. BERG SEEDS IN DIFFERENT PACKAGING AND AT VARIED TEMPERATURES, REVISTA BRASILEIRA DE FRUTICULTURA, 35 (2013) 262-269.

[358] M.C. Price, A.T. Kearsley, M.J. Burchell, Validation of the Preston-Tonks-Wallace strength model at strain rates approaching similar to 10(11) s(-1) for Al-1100, tantalum and copper using hypervelocity impact crater morphologies, INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 52 (2013) 1-10.

[359] A. Ozudogru, D.P. Correa da Silva, E. Kaya, G. Dradi, R. Paiva, M. Lambardi, In vitro Conservation and Cryopreservation of Nandina domestica, an Outdoor Ornamental Shrub, NOTULAE BOTANICAE HORTI AGROBOTANICI CLUJ-NAPOCA, 41 (2013) 638-645.

[360] A.R. Marques, F.d.C. Oliveira Gomes, M.P. Pontes Fonseca, J.S. Parreira, V.P. Santos, Efficiency of PET reactors in solar water disinfection for use in southeastern Brazil, SOLAR ENERGY, 87 (2013) 158-167.

[361] K. Maciejewski, M. Jouiad, H. Ghonem, Dislocation/precipitate interactions in IN100 at 650 degrees C, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 582 (2013) 47-54.

[362] F.X. Li, K.J. Kang, Deformation and cracking near a hole in an oxide-forming alloy foil subjected to thermal cycling, ACTA MATERIALIA, 61 (2013) 385-398.

[363] K. Koyvanich, K. Chokprasombat, C. Sirisathitkul, P. Harding, S. Rugmai, Synchrotron Small Angle X-ray Scattering Spectra Of Iron-based Magnetic Fluids, in:  MATERIALS SCIENCE AND TECHNOLOGY VII, 2013, pp. 31-+.

[364] T.-K. Jung, K.-H. Kim, D.-W. Joh, K.-Y. Heo, H.-S. Lee, S.-C. Lim, H.-C. Kwon, Tensile properties of copper-nickel fine clad prepared by surface activation bonding and subsequent heat treatment, ELECTRONIC MATERIALS LETTERS, 9 (2013) 767-770.

[365] Y. Jiang, Y. Li, W. Wang, S. Bao, Y. Zu, H. Wang, Impacts on seed germination features of Eupatorium adenophorum from variable light stimulation and traditional dormancy-broken methods, Acta Ecologica Sinica, 33 (2013) 302-309.

[366] M. Jawaharlal, S.P. Thamaraiselvi, M. Ganga, Standardization of Export Packaging Technology for Jasmine (Jasminum sambac Ait.) Flowers, in:  INTERNATIONAL CONFERENCE ON QUALITY MANAGEMENT IN SUPPLY CHAINS OF ORNAMENTALS QMSCO2012, 2013, pp. 81-91.

[367] S.-J. Hsu, C.C. Lee, Ieee, A Monolithic Aluminum Circuit Board Structure, in:  2013 IEEE 63RD ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2013, pp. 1346-1349.

[368] T. Hongpattarakere, P. Rattanaubon, N. Buntin, Improvement of Freeze-Dried Lactobacillus Plantarum Survival Using Water Extracts and Crude Fibers from Food Crops, FOOD AND BIOPROCESS TECHNOLOGY, 6 (2013) 1885-1896.

[369] S. Hadi, A.K. Tieu, C. Lu, H. Zhu, A micro deep drawing of ARB processed aluminium foil AA1235, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 47 (2013) 175-187.

[370] Y. Goto, T. Matsumoto, K. Nikawa, Observation of impurity diffusion defect in IGBT using a laser terahertz emission microscope technique, MICROELECTRONICS RELIABILITY, 53 (2013) 1370-1374.

[371] J. Dryzek, K. Siemek, The "accumulation effect" of positrons in the stack of foils, detected by measurements of the positron implantation profile, JOURNAL OF APPLIED PHYSICS, 114 (2013).

[372] A.K. Chauhan, V. Patil, Effect of packaging material on storage ability of mango milk powder and the quality of reconstituted mango milk drink, POWDER TECHNOLOGY, 239 (2013) 86-93.

[373] W. Cai, X. Tang, L. Yang, X. Wang, Facile fabrication of leafy spikes-like silver dendrite crystals for SERS substrate, MATERIALS RESEARCH BULLETIN, 48 (2013) 4125-4133.

[374] D.W. Brown, M.A. Okuniewski, J.D. Almer, L. Balogh, B. Clausen, J.S. Okasinski, B.H. Rabin, High energy X-ray diffraction measurement of residual stresses in a monolithic aluminum clad uranium-10 wt% molybdenum fuel plate assembly, JOURNAL OF NUCLEAR MATERIALS, 441 (2013) 252-261.

[375] Y. Birol, Formation of pinch marks on pack rolled aluminium foil, ENGINEERING FAILURE ANALYSIS, 28 (2013) 82-89.

[376] J.-H. Ai, M.L.C. Lim, J.R. Scully, Effective Hydrogen Diffusion in Aluminum Alloy 5083-H131 as a Function of Orientation and Degree of Sensitization, CORROSION, 69 (2013) 1225-1239.

[377] J. Zrnik, L. Kraus, S. Scheriau, R. Pippan, STRUCTUAL EVOLUTION IN ALUMINIUM ALLOY AA6082 DURING HPT DEFORMATION AT INCREASED TEMPERATURE, in:  PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012, pp. 1613-1620.

[378] B. Zhou, H. Feng, A.J. Pearlstein, Continuous-flow ultrasonic washing system for fresh produce surface decontamination, INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES, 16 (2012) 427-435.

[379] E.E. Zasimchuk, R.G. Gontareva, O.I. Baskova, M.G. Chausov, V. Hutsaylyuk, On Possibility to Use Single Crystal Sensors of Deformation Damage under Dynamical Loading, METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 34 (2012) 509-520.

[380] S. Zapryanov, V. Goltsev, B. Galutsov, M. Gelev, A. Blagoev, Influence of the soft X-ray plasma focus radiation on live microorganisms, EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS, 58 (2012).

[381] Y. Yue, G. Yang, L. Sun, N. Ma, Study on Effect of Middle Annealing on Pinhole Rate of Ultra-light Double Zero Aluminum Foil, Hot Working Technology, 41 (2012) 175-176.

[382] S. Yeo, S.-K. Hong, S.-J. Lee, C. Lim, J.-W. Park, Study of Residual Stress and Surface Morphology Changes in Al2O3 Induced by Nd:YAG Laser Irradiation, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 21 (2012) 137-142.

[383] W. Ye, Y. Chen, F. Zhou, C. Wang, Y. Li, Fluoride-assisted galvanic replacement synthesis of Ag and Au dendrites on aluminum foil with enhanced SERS and catalytic activities, JOURNAL OF MATERIALS CHEMISTRY, 22 (2012) 18327-18334.

[384] W. Yan, G. Fu, H. Chen, G. Chen, Effects of Oxide Inclusions on Flow Stress Behavior of 1235 Aluminum Alloy During Hot Compression, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 21 (2012) 2203-2206.

[385] L. Xu, L.M. Dong, W. Li, A simple "two foil" approach to the fabrication of hierarchical superhydrophobic surfaces, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 404 (2012) 12-16.

[386] P.J. Wozniakiewicz, A.T. Kearsley, H.A. Ishii, M.J. Burchell, J.P. Bradley, N. Teslich, M.J. Cole, M.C. Price, The origin of crystalline residues in Stardust Al foils: Surviving cometary dust or crystallized impact melts?, METEORITICS & PLANETARY SCIENCE, 47 (2012) 660-670.

[387] T. Wilczynska, R. Wisniewski, P. Konarski, Temperature and pressure properties of the resistance alloy ZERANIN30 implanted by high dose, middle energy, C+ ions, PRZEGLAD ELEKTROTECHNICZNY, 88 (2012) 292-295.

[388] Z. Wang, B. Qu, F. Lin, Effect of Accelerated Aging and Priming on Maize Jiyu No.8 Seeds, Seed, 31 (2012) 34-39.

[389] I.I. Tashlykova-Bushkevich, G. Itoh, Effect of rapid solidification on microstructural features of Al-Cr alloys, in:  THERMEC 2011, PTS 1-4, 2012, pp. 301-+.

[390] C.M. Schoellhammer, B.E. Polat, J. Mendenhall, R. Maa, B. Jones, D.P. Hart, R. Langer, D. Blankschtein, Rapid skin permeabilization by the simultaneous application of dual-frequency, high-intensity ultrasound, JOURNAL OF CONTROLLED RELEASE, 163 (2012) 154-160.

[391] M. Sato, Y. Matsuki, I. Hayashi, M. Kuroda, Yielding and strain hardening in aluminium single-crystal foils subjected to tension and bending, PHILOSOPHICAL MAGAZINE LETTERS, 92 (2012) 507-516.

[392] T. Santhi, K.V. Rajan, A Study of Closure of Tympanic Membrane Perforations by Chemical Cauterisation, INDIAN JOURNAL OF OTOLARYNGOLOGY AND HEAD & NECK SURGERY, 64 (2012) 389-392.

[393] J. Ren, C. Ma, Y. Zhang, Discussion of Efficient Combing Technology, Cotton Textile Technology, 40 (2012) 20-23.

[394] T.N. Oskolkova, E.A. Budovskikh, PULSE PLASMA TREATMENT OF THE SURFACE OF ALLOY VK10KS, METAL SCIENCE AND HEAT TREATMENT, 53 (2012) 608-610.

[395] T. Ogawa, M.N. Morev, T. Iimoto, T. Kosako, Measurements of activation reaction rates in transverse shielding concrete exposed to the secondary particle field produced by intermediate energy heavy ions on an iron target, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 271 (2012) 65-71.

[396] R. Muvunyi, R. Corcuff, J. Arul, UV-C Induced Disease Resistance to Botrytis cinerea in Stored Carrot Is Not a Systemic Effect, in:  IV INTERNATIONAL CONFERENCE POSTHARVEST UNLIMITED 2011, 2012, pp. 139-143.

[397] J. Montalvo-Urquizo, P. Bobrov, A. Schmidt, W. Wosniok, Elastic responses of texturized microscale materials using FEM simulations and stochastic material properties, MECHANICS OF MATERIALS, 47 (2012) 1-10.

[398] K.i. Kita, N. Kondo, Y. Izutsu, H. Kita, Joining of alumina by using polycarbosilane and aluminum foil, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 120 (2012) 138-142.

[399] H.-H. Kim, S.-C. Lee, PERSONALISATION' OF DROPLET-VITRIFICATION PROTOCOLS FOR PLANT CELLS: A SYSTEMATIC APPROACH TO OPTIMISING CHEMICAL AND OSMOTIC EFFECTS, CRYOLETTERS, 33 (2012) 271-279.

[400] D.H. Kim, B.Y. Yu, P.R. Cha, W.Y. Yoon, J.Y. Byun, S.H. Kim, A study on FeCrAl foam as effective catalyst support under thermal and mechanical stresses, SURFACE & COATINGS TECHNOLOGY, 209 (2012) 169-176.

[401] A.K. Khan, Z. Yao, M.R. Daymond, R.A. Holt, Effect of foil orientation on damage accumulation during irradiation in magnesium and annealing response of dislocation loops, JOURNAL OF NUCLEAR MATERIALS, 423 (2012) 132-141.

[402] S. Jena, H. Das, Shelf life prediction of aluminum foil laminated polyethylene packed vacuum dried coconut milk powder, JOURNAL OF FOOD ENGINEERING, 108 (2012) 135-142.

[403] M. Janecek, Reflectivity Spectra for Commonly Used Reflectors, IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 59 (2012) 490-497.

[404] M. Imaizumi, Y. Yuri, P.R. Bolton, S.-i. Sato, T. Ohshima, Ieee, Innovative Technologies on Proton Irradiation Ground Tests for Space Solar Cells, in:  2012 38TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2012, pp. 2831-2834.

[405] F.R. Hay, P. Thavong, P. Taridno, S. Timple, Evaluation of zeolite seed 'Drying Beads (R)' for drying rice seeds to low moisture content prior to long-term storage, SEED SCIENCE AND TECHNOLOGY, 40 (2012) 374-395.

[406] J. Gao, S. Zhou, G. Zhang, X. Kong, Study on the formation mechanism and control of untrimmed aluminium foil's surface dirty defect, in:  ADVANCED RESEARCH ON MATERIAL ENGINEERING AND ITS APPLICATION, 2012, pp. 433-437.

[407] J. Gao, S. Zhou, X. Kong, Cause and Preventive Measures of Bright-craterlet on hydrophile Aluminum Foil, in:  ADVANCED RESEARCH ON MATERIAL ENGINEERING AND ITS APPLICATION, 2012, pp. 373-376.

[408] E.C. Fossum, C.D. Molek, W.K. Lewis, M.E. Fajardo, Benchtop Energetics: Hyperthermal Species Detection, PROPELLANTS EXPLOSIVES PYROTECHNICS, 37 (2012) 445-458.

[409] K. Feng, Y. Cao, P. Wu, Controlled self-assembly of graphene oxide on a remote aluminium foil, JOURNAL OF MATERIALS CHEMISTRY, 22 (2012) 11455-11457.

[410] V. Fekete, E. Deconinck, F. Bolle, J. Van Loco, Modelling aluminium leaching into food from different foodware materials with multi-level factorial design of experiments, FOOD ADDITIVES AND CONTAMINANTS PART A-CHEMISTRY ANALYSIS CONTROL EXPOSURE & RISK ASSESSMENT, 29 (2012) 1322-1333.

[411] S. Egoshi, K. Azumi, H. Konno, K. Ebihara, Y. Taguchi, Effects of minor elements in Al alloy on zincate pretreatment, APPLIED SURFACE SCIENCE, 261 (2012) 567-573.

[412] M. Clancy, M.J. Pomeroy, S. Belochapkine, Improved FIB milling process for TEM preparation of NiAlPt bulk alloy samples containing residual stress, MICRON, 43 (2012) 627-630.

[413] D.C. Botia, M.S. Rodriguez, V.M. Sarria, Evaluation of UV/TiO2 and UV/ZnO photocatalytic systems coupled to a biological process for the treatment of bleaching pulp mill effluent, CHEMOSPHERE, 89 (2012) 732-736.

[414] J. Zrnik, R. Pippan, S. Scheriau, M. Fujda, Ultrafine Structure Formation in Aluminium Alloy Processed by HPT and the Mechanical Properties Response, in:  NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2, 2011, pp. 903-+.

[415] Z. Zhou, H. Guo, M. Abbas, S. Gong, Effect of water vapor on the phase transformation of alumina grown on NiAl at 950 degrees C, CORROSION SCIENCE, 53 (2011) 2943-2947.

[416] X. Zhang, C. Li, H. Wang, T. Xu, Recovery of hydrochloric acid from simulated chemosynthesis aluminum foil wastewater by spiral wound diffusion dialysis (SWDD) membrane module, JOURNAL OF MEMBRANE SCIENCE, 384 (2011) 219-225.

[417] J. Zabaglo, J. Baron, B. Kowarska, M. Olek, W. Zukowski, Raw material recycling of aluminium from multi-material packagings, PRZEMYSL CHEMICZNY, 90 (2011) 1080-1082.

[418] T. Vujovic, I. Sylvestre, D. Ruzic, F. Engelmann, Droplet-vitrification of apical shoot tips of Rubus fruticosus L. and Prunus cerasifera Ehrh, SCIENTIA HORTICULTURAE, 130 (2011) 222-228.

[419] R. von Bargen, A. von Hehl, H.-W. Zoch, Precipitation hardening behaviour of Al-2Sc micro sheets, in:  LIGHT METALS TECHNOLOGY V, 2011, pp. 327-330.

[420] I.I. Tashlykova-Bushkevich, G. Itoh, V.G. Shepelevich, T. Shikagawa, Kinetics of Hydrogen Desorption from Rapidly Solidified Al-Cr Alloys, MATERIALS TRANSACTIONS, 52 (2011) 895-899.

[421] L. Silina, I. Gramatina, SENSORY EVALUATION OF ROASTED MARINATED VENISON, in:  RESEARCH FOR RURAL DEVELOPMENT 2011, VOL 1, 2011, pp. 112-118.

[422] E. Sanchez-Zapata, E. Fuentes-Zaragoza, C. Navarro-Rodriguez de Vera, E. Sayas, E. Sendra, J. Fernandez-Lopez, J.A. Perez-Alvarez, Effects of tuna pate thickness and background on CIEL*a*b* color parameters and reflectance spectra, FOOD CONTROL, 22 (2011) 1226-1232.

[423] P. Rizzi, A. Habib, A. Castellero, L. Battezzati, Constrained deformation of an Al based amorphous alloy by cold rolling, JOURNAL OF ALLOYS AND COMPOUNDS, 509 (2011) S275-S278.

[424] J.R. Rao, M. Kumar, L. Sathiyanarayanan, S.S. Yadav, Vikas, Application of a Stability-Indicating HPTLC Method for Quantitative Analysis of Sertraline Hydrochloride in Pharmaceutical Dosage Forms, JPC-JOURNAL OF PLANAR CHROMATOGRAPHY-MODERN TLC, 24 (2011) 140-144.

[425] A. Pantelica, A. Ene, M. Gugiu, C. Ciortea, O. Constantinescu, PIXE ANALYSIS OF SOME VEGETABLE SPECIES, ROMANIAN REPORTS IN PHYSICS, 63 (2011) 997-1008.

[426] S. Ono, H. Habazaki, Pit growth behaviour of aluminium under galvanostatic control, CORROSION SCIENCE, 53 (2011) 3521-3525.

[427] A. Nukari, J. Laamanen, M. Uosukainen, A Preliminary Study of the Droplet Vitrification Method Applied on Lilac, in:  INTERNATIONAL SYMPOSIUM ON CRYOPRESERVATION IN HORTICULTURAL SPECIES, 2011, pp. 269-273.

[428] C. Neumann, E. Sondermann, F. Kargl, A. Meyer, Compact High-Temperature Shear-Cell Furnace for In-Situ Diffusion Measurements, in:  INTERNATIONAL SYMPOSIUM ON PHYSICAL SCIENCES IN SPACE, 2011.

[429] A. Michalcova, D. Vojtech, P. Novak, Structure of Al-TM-Ce alloy, PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 48 (2011) 132-135.

[430] M. Manceau, D. Angmo, M. Jorgensen, F.C. Krebs, ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules, ORGANIC ELECTRONICS, 12 (2011) 566-574.

[431] L. Liu, J. Zhao, Y. Zhang, F. Zhao, Y. Zhang, Fabrication of superhydrophobic surface by hierarchical growth of lotus-leaf-like boehmite on aluminum foil, JOURNAL OF COLLOID AND INTERFACE SCIENCE, 358 (2011) 277-283.

[432] J. Liu, X. Zhang, M. Chen, L. Li, B. Zhu, J. Tang, S. Liu, DFT study on surface properties and dissolution trends of Al(100) surfaces doped with Zn, Ga, In, Sn and Pb, APPLIED SURFACE SCIENCE, 257 (2011) 4004-4009.

[433] G. Li, Y. Li, X. Qian, H. Liu, H. Lin, N. Chen, Y. Li, Construction of Tubular Molecule Aggregations of Graphdiyne for Highly Efficient Field Emission, JOURNAL OF PHYSICAL CHEMISTRY C, 115 (2011) 2611-2615.

[434] Y.-G. Lee, E. Popova, H.-Y. Cui, H.-H. Kim, S.-U. Park, C.-H. Bae, S.-C. Lee, F. Engelmann, IMPROVED CRYOPRESERVATION OF CHRYSANTHEMUM (Chrysanthemum morifolium) USING DROPLET-VITRIFICATION, CRYOLETTERS, 32 (2011) 487-497.

[435] K.K. Lau, C.K. Chan, M.L. Tse, F.L. Lau, Hot water immersion therapy with a thermal isolator in patient with marine envenomation, HONG KONG JOURNAL OF EMERGENCY MEDICINE, 18 (2011) 204-209.

[436] K.S. Kim, S.J. Park, J.G. Eden, Linear Arrays of Microchannel Plasmas in Monolithic Al/Al2O3 Sheets, IEEE TRANSACTIONS ON PLASMA SCIENCE, 39 (2011) 2698-2699.

[437] H. Hasanzadeh, M. Mokhtari-Dizaji, S.Z. Bathaie, Z.M. Hassan, V. Nilchiani, H. Goudarzi, Enhancement and control of acoustic cavitation yield by low-level dual frequency sonication: A subharmonic analysis, ULTRASONICS SONOCHEMISTRY, 18 (2011) 394-400.

[438] H. Gubbuk, E. Gunes, T. Ayala-Silva, S. Ercisli, Rapid Vegetative Propagation Method for Carob, NOTULAE BOTANICAE HORTI AGROBOTANICI CLUJ-NAPOCA, 39 (2011) 251-254.

[439] X.-X. Fu, X.-N. Kang, B. Zhang, C. Xiong, X.-Z. Jiang, D.-S. Xu, W.-M. Du, G.-Y. Zhang, Light transmission from the large-area highly ordered epoxy conical pillar arrays and application to GaN-based light emitting diodes, JOURNAL OF MATERIALS CHEMISTRY, 21 (2011) 9576-9581.

[440] A. Farhadian, S. Jinap, H.N. Hanifah, I.S. Zaidul, Effects of meat preheating and wrapping on the levels of polycyclic aromatic hydrocarbons in charcoal-grilled meat, FOOD CHEMISTRY, 124 (2011) 141-146.

[441] S.U.N. Fali, X.I.A. Xiaobin, Z. Zhihong, X. Lv, M-C simulation of Phoswich detector for measuring beta-rays in radioactive aerosol, Nuclear Techniques, 34 (2011) 594-598.

[442] V. Escobedo, J.A. Escobedo, Adventitious Root Formation without Rooting Medium in Etiolated Shoots of 'Duke' Avocado (Persea americana) Growing on Nurse Plants, in:  XXVIII INTERNATIONAL HORTICULTURAL CONGRESS ON SCIENCE AND HORTICULTURE FOR PEOPLE (IHC2010): INTERNATIONAL SYMPOSIUM ON MICRO AND MACRO TECHNOLOGIES FOR PLANT PROPAGATION AND BREEDING IN HORTICULTURE, 2011, pp. 227-232.

[443] D. Dianawati, N.P. Shah, Survival, Acid and Bile Tolerance, and Surface Hydrophobicity of Microencapsulated B. animalis ssp lactis Bb12 during Storage at Room Temperature, JOURNAL OF FOOD SCIENCE, 76 (2011) M592-M599.

[444] C.F. de Melo, F.T. da Silva, T.C.B. de Paiva, Treatment of wastewater from a cotton dyeing process with UV/H2O2 using a photoreactor covered with reflective material, WATER SCIENCE AND TECHNOLOGY, 64 (2011) 460-468.

[445] E. Condello, D. Ruzic, B. Panis, E. Caboni, Raspberry Cryopreservation by Droplet Vitrification Technique, in:  XXVIII INTERNATIONAL HORTICULTURAL CONGRESS ON SCIENCE AND HORTICULTURE FOR PEOPLE (IHC2010): III INTERNATIONAL SYMPOSIUM ON PLANT GENETIC RESOURCES, 2011, pp. 965-969.

[446] J.H. Cho, M.H. Kim, S.J. Park, J.G. Eden, Arrays of Microplasma Jets Generated by Double Parabolic Microcavities in an Hourglass Configuration, IEEE TRANSACTIONS ON PLASMA SCIENCE, 39 (2011) 2376-2377.

[447] D. Agrahar-Murugkar, K. Jha, Influence of storage and packaging conditions on the quality of soy flour from sprouted soybean, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 48 (2011) 325-328.

[448] L. Zhou, Y. Li, C. Wang, X. Zhou, Study on laser shock peening process for LY2 alloy, High Power Laser and Particle Beams, 22 (2010) 1780-1784.

[449] J. Zhang, Y. Ding, C. Liu, S. Zhang, Optimization of the ultra-high pressure manufacturing process of instant maize porridge, Science & Technology of Food Industry, 31 (2010) 248-250,253.

[450] S. Yao, X. Zhu, E. Zhao, C. Zhao, H. Cui, In vivo study in dark-induced senescence in individual tobacco leaf, Acta Tabacaria Sinica, 16 (2010) 36-39.

[451] M. Wiemer, J. Braeuer, D. Wuensch, T. Gessner, Reactive Bonding and Low Temperature Bonding of Heterogeneous Materials, in:  SEMICONDUCTOR WAFER BONDING 11: SCIENCE, TECHNOLOGY, AND APPLICATIONS - IN HONOR OF ULRICH GOSELE, 2010, pp. 307-318.

[452] I. Tashlykova-Bushkevich, T. Shikagawa, T. Suzuki, V. Shepelevich, G. Itoh, Effect of Cr and Zr dopes on hydrogen behaviour in rapidly solidified aluminium foils, in:  THERMEC 2009, PTS 1-4, 2010, pp. 465-+.

[453] F.L.F.D. Silveira, P.R. Barja, D. Acosta-Avalos, Photoacoustic evaluation of the penetration of piroxicam gel applied with phonophoresis into human skin, in:  15TH INTERNATIONAL CONFERENCE ON PHOTOACOUSTIC AND PHOTOTHERMAL PHENOMENA (ICPPP15), 2010.

[454] S.L. Semiatin, B.W. Shanahan, F. Meisenkothen, Hot rolling of gamma titanium aluminide foil, ACTA MATERIALIA, 58 (2010) 4446-4457.

[455] T. Sekine, T. Obikawa, Single Point Micro Incremental Forming of Miniature Shell Structures, JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 4 (2010) 543-557.

[456] B. Roth, R. Nortvedt, E. Slinde, A. Foss, E. Grimsbo, L.H. Stien, Electrical stimulation of Atlantic salmon muscle and the effect on flesh quality, AQUACULTURE, 301 (2010) 85-90.

[457] Q. Pan, D. Guo, Y. Luo, W. Xu, Research on Processing Technology of Foil of Vessel with 3003 Aluminum Alloy Plate and Strip Material, Mining and Metallurgical Engineering, 30 (2010) 111-113.

[458] Y. Okamoto, K. Tazumi, Y. Sanada, M. Tsugane, E. Uejima, Light-induced Deterioration Test of Carboplatin under Clinical Settings, YAKUGAKU ZASSHI-JOURNAL OF THE PHARMACEUTICAL SOCIETY OF JAPAN, 130 (2010) 1369-1374.

[459] P.M. Naikwadi, U.D. Chavan, V.D. Pawar, R. Amarowicz, Studies on dehydration of figs using different sugar syrup treatments, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 47 (2010) 442-445.

[460] S. Mukherjee, A.K. Ghosh, Flow visualization and estimation of strain and strain-rate during friction stir process, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527 (2010) 5130-5135.

[461] D. Mridula, R. Jain, K.K. Singh, Effect of storage on quality of fortified Bengal gram sattu, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 47 (2010) 119-123.

[462] J. Morgiel, N. Sobczak, M. Pomorska, W. Radziwill, R. Nowak, A. Kudyba, J. Wojewoda-Budka, TEM investigation of reaction zone products formed between molten Al and CoO monocrystalline substrate, JOURNAL OF MICROSCOPY, 237 (2010) 299-303.

[463] U. Maeder, T. Schmidts, J.-M. Burg, J.T. Heverhagen, F. Runkel, M. Fiebich, Hardware and software system for automatic microemulsion assay evaluation by analysis of optical properties, in:  MEDICAL IMAGING 2010: BIOMEDICAL APPLICATIONS IN MOLECULAR, STRUCTURAL, AND FUNCTIONAL IMAGING, 2010.

[464] H. Ma, Z. Liang, S. Wang, L. Huang, Cold stratification, fluctuating temperatures and removal of the glumes significantly improved germination of Leymus chinensis, JOURNAL OF FOOD AGRICULTURE & ENVIRONMENT, 8 (2010) 1291-1296.

[465] X. Luo, C. Yuan, H. Ma, J. Zhang, K. Chen, Y. Zhang, K. Luo, Strain behavior of annealed 45 steel induced by laser shock processing, Heat Treatment of Metals, 35 (2010) 27-32.

[466] H.S. Lim, S.H. Park, S.H. Koo, Y.-J. Kwark, E.L. Thomas, Y. Jeong, J.H. Cho, Superamphiphilic Janus Fabric, LANGMUIR, 26 (2010) 19159-19162.

[467] J. Li, H. Gao, G.J. Cheng, Forming Limit and Fracture Mode of Microscale Laser Dynamic Forming, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 132 (2010).

[468] M. Lederer, V. Groeger, G. Khatibi, B. Weiss, Size dependency of mechanical properties of high purity aluminium foils, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527 (2010) 590-599.

[469] T. Koutchma, Y. Song, I. Setikaite, P. Juliano, G.V. Barbosa-Canovas, C.P. Dunne, E. Patazca, PACKAGING EVALUATION FOR HIGH-PRESSURE HIGH-TEMPERATURE STERILIZATION OF SHELF-STABLE FOODS, JOURNAL OF FOOD PROCESS ENGINEERING, 33 (2010) 1097-1114.

[470] J.-H. Jang, W.-S. Choi, N.-J. Kim, C.-H. Lee, T.-Y. Kim, C. Park, S.-J. Suh, Formation of aluminum tunnel pits arrayed using SU-8 masks with UV-assisted thermal imprint lithography, MICROELECTRONIC ENGINEERING, 87 (2010) 2610-2613.

[471] S. Jamshidian, M. Ghasemnezhad, D. Bakhshi, H. Sarikhani, Reflected Light Improves Berry Quality and Phenolic Content of Vitis vinifera cv. Askary, HORTICULTURE ENVIRONMENT AND BIOTECHNOLOGY, 51 (2010) 10-14.

[472] S. Jahanmir, Z. Ren, H. Heshmat, M. Tomaszewski, DESIGN AND EVALUATION OF AN ULTRAHIGH SPEED MICRO-MACHINING SPINDLE, MACHINING SCIENCE AND TECHNOLOGY, 14 (2010) 224-243.

[473] Y. Hu, K. Wang, T.C. Zhu, Pre-clinic study of uniformity of light blanket for intraoperative photodynamic therapy, in:  OPTICAL METHODS FOR TUMOR TREATMENT AND DETECTION: MECHANISMS AND TECHNIQUES IN PHOTODYNAMIC THERAPY XIX, 2010.

[474] M. Hindiyeh, A. Ali, Investigating the efficiency of solar energy system for drinking water disinfection, DESALINATION, 259 (2010) 208-215.

[475] T. Hausoel, V. Maier, C.W. Schmidt, M. Winkler, H.W. Hoeppel, M. Goeken, Tailoring Materials Properties by Accumulative Roll Bonding, ADVANCED ENGINEERING MATERIALS, 12 (2010) 740-746.

[476] Y. Harada, I. Fukuda, Shot lining of magnesium alloy with hard powders, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 20 (2010) S708-S712.

[477] T. Haga, K. Inoue, H. Harada, R. Nakamura, Micro-forming of aluminum alloy by cold rolling, in:  PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 2010, pp. 41-44.

[478] V. Gupta, N.S. Vijayalakshmi, B. Ashwini, K. Anbarasu, G. Vijayalakshmi, M. Prakash, A.R. Indiramma, G.C.P. Rangarao, B.S. Ramesh, SHELF LIFE ENHANCEMENT OF COCONUT BURFI- AN INDIAN TRADITIONAL SWEET, JOURNAL OF FOOD QUALITY, 33 (2010) 329-349.

[479] R.S. Guedes, E.U. Alves, E.P. Goncalves, J.S. Viana, P.R. Cabral de Franca, S.d.S. Santos, Physiological quality of Amburana cearensis (Allemao) AC Smith seeds stored, SEMINA-CIENCIAS AGRARIAS, 31 (2010) 331-342.

[480] M.-C. Chuang, C.-J. Liao, C.-W. Chao, Parallel machine scheduling with preference of machines, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 48 (2010) 4139-4152.

[481] X.-W. Cheng, Q.-F. Guan, X.-H. Fan, B. Chen, Effect of vacancy defect clusters on the optical property of the aluminium filter used for the space solar telescope, CHINESE PHYSICS B, 19 (2010).

[482] G.P. Chaudhari, V.L. Acoff, Titanium aluminide sheets made using roll bonding and reaction annealing, INTERMETALLICS, 18 (2010) 472-478.

[483] M.K. Bull, R.J. Steele, M. Kelly, S.A. Olivier, B. Chapman, Packaging under pressure: Effects of high pressure, high temperature processing on the barrier properties of commonly available packaging materials, INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES, 11 (2010) 533-537.

[484] J. Bindu, C.N. Ravishankar, T.K.S. Gopal, A.K. Mallick, INVESTIGATION OF SHELF LIFE AND HEAT PENETRATION ATTRIBUTES OF READY-TO-EAT "FISH PEERA" FROM ANCHOVY (STOLEPHOROUS COMMERSONI) IN RETORT POUCHES, JOURNAL OF FOOD PROCESSING AND PRESERVATION, 34 (2010) 207-222.

[485] A.A. Badran, I.A. Yousef, N.K. Joudeh, R. Al Hamad, H. Halawa, H.K. Hassouneh, Portable solar cooker and water heater, ENERGY CONVERSION AND MANAGEMENT, 51 (2010) 1605-1609.

[486] A.M. Avachat, S.B. Bhise, Stability-Indicating Validated HPTLC Method for Simultaneous Analysis of Rifabutin and Isoniazid in Pharmaceutical Formulations, JPC-JOURNAL OF PLANAR CHROMATOGRAPHY-MODERN TLC, 23 (2010) 123-128.

[487] M. Attouchi, S. Sadok, The effect of powdered thyme sprinkling on quality changes of wild and farmed gilthead sea bream fillets stored in ice, FOOD CHEMISTRY, 119 (2010) 1527-1534.

[488] N. Asefi, L. Rofehgarinejad, H. Mirzaei, Effects of pre fry drying methods on the quality of deep fat fried onion slices, in:  PROCEEDINGS OF 2010 INTERNATIONAL CONFERENCE ON BIOTECHNOLOGY AND FOOD SCIENCE (ICBFS 2010), 2010, pp. 188-192.

[489] X. Zhang, B. Wang, Y. Liu, G. Xu, Conversion of Methane by Steam Reforming Using Dielectric-barrier Discharge, CHINESE JOURNAL OF CHEMICAL ENGINEERING, 17 (2009) 625-629.

[490] O. Williams, C. Liu, D.P. Webb, P. Firth, Ieee, Adsorbed Contamination on Ceramic Surfaces Stored in Industrial Ambient Conditions and its Effect on Epoxy Bleed, in:  2009 11TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC 2009), 2009, pp. 500-+.

[491] F. Usui, Y. Yamamoto, Y. Nakamura, T. Ono, H. Kagami, Novel System for Degeneration of Blood Vessels by UV Irradiation and Subsequent Regeneration Using Chick Bone Marrow Cells, CELLS TISSUES ORGANS, 189 (2009) 348-355.

[492] A.A. Shirkhedkar, S.J. Surana, Application of a Stability-Indicating Densitometric RP-TLC Method for Analysis of Pioglitazone Hydrochloride in the Bulk Material and in Pharmaceutical Formulations, JPC-JOURNAL OF PLANAR CHROMATOGRAPHY-MODERN TLC, 22 (2009) 191-196.

[493] A.A. Shirkhedkar, S.J. Surana, Simultaneous Densitometric TLC Analysis of Atorvastatin Calcium and Fenofibrate in the Bulk Drug and in Pharmaceutical Formulations, JPC-JOURNAL OF PLANAR CHROMATOGRAPHY-MODERN TLC, 22 (2009) 355-358.

[494] G. Shi, J. Liang, G. Chen, S. Du, Comparison of tensile properties between NiCoCrAl/YSZ microlaminates and the monolithic NiCoCrAl foil fabricated by EB-PVD, MATERIALS LETTERS, 63 (2009) 1665-1667.

[495] S.K. Sharma, G.D. Ko, K.J. Kang, High temperature creep and tensile properties of alumina formed on Fecralloy foils doped with yttrium, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 29 (2009) 355-362.

[496] C. Sanchez-Romero, R. Swennen, B. Panis, CRYOPRESERVATION OF OLIVE EMBRYOGENIC CULTURES, CRYOLETTERS, 30 (2009) 359-372.

[497] A. Rivas-Canedo, M. Nunez, E. Fernandez-Garcia, Volatile compounds in Spanish dry-fermented sausage 'salchichon' subjected to high pressure processing. Effect of the packaging material, MEAT SCIENCE, 83 (2009) 620-626.

[498] A. Rivas-Canedo, E. Fernandez-Garcia, M. Nunez, Volatile compounds in fresh meats subjected to high pressure processing: Effect of the packaging material, MEAT SCIENCE, 81 (2009) 321-328.

[499] A. Rivas-Canedo, E. Fernandez-Garcia, M. Nunez, Volatile compounds in dry-cured Serrano ham subjected to high pressure processing. Effect of the packaging material, MEAT SCIENCE, 82 (2009) 162-169.

[500] E. Radziemska, P. Ostrowski, T. Seramak, CHEMICAL TREATMENT OF CRYSTALLINE SILICON SOLAR CELLS AS A MAIN STAGE OF PV MODULES RECYCLING, ECOLOGICAL CHEMISTRY AND ENGINEERING S-CHEMIA I INZYNIERIA EKOLOGICZNA S, 16 (2009) 379-387.

[501] M. Quitzau, M. Wolter, H. Kersten, Plasma Treatment of Polyethylene Powder Particles in a Hollow Cathode Glow Discharge, PLASMA PROCESSES AND POLYMERS, 6 (2009) S392-S396.

[502] Y. Pang, J. Yuan, Q. Sun, Y. Hu, Processing 20 Ply Clad Plate by Accumulative Clad Rolling from Stainless Steel/Aluminum/Aluminum Alloy.../Stainless Steel Sheets, in:  MATERIALS RESEARCH, PTS 1 AND 2, 2009, pp. 454-458.

[503] V.V. Lozenko, V.G. Shepelevich, Structure and mechanical properties of rapidly solidified foils of Zn-Al alloys, PHYSICS OF METALS AND METALLOGRAPHY, 107 (2009) 370-374.

[504] T. Liu, Y. Yin, L. Li, Inhibition Microbial Adherence of Superhydrophobic Surface on Aluminum in Seawater, in:  MULTI-FUNCTIONAL MATERIALS AND STRUCTURES II, PTS 1 AND 2, 2009, pp. 1123-1126.

[505] J.-C. Liu, X.-M. Zhang, M.-A. Chen, J.-G. Tang, S.-D. Liu, Prediction of the Surface Segregation of Trace Elements on the Al(100) Surface by Density Functional Theory, ACTA PHYSICO-CHIMICA SINICA, 25 (2009) 2519-2523.

[506] L.I. Linbo, L.U. Xingqiang, L.I. Zhenghong, Y. Jianlun, X.U. Rongkun, Z. Yaohua, N. Jiamin, Azimuthal X-ray power distribution in Z-pinch implosions, High Power Laser and Particle Beams, 21 (2009) 1501-1505.

[507] W. Li, W. He, Y. Li, C. Wang, Z. Yang, Effects of Laser Shock Processing on Vibration Fatigue Properties of K417 Material, Chinese Journal of Lasers, 36 (2009) 2197-2201.

[508] J. Li, P. Liu, J. Wang, G. Xiao, Z. Guo, Z. Hu, R. Mao, Z. Sun, H. Xu, W. Zhan, An ellipsoidal time detector with PMT readout, NUCLEAR SCIENCE AND TECHNIQUES, 20 (2009) 248-250.

[509] Y. Kotsuka, H. Kayahara, K. Murano, H. Matsui, M. Hamuro, Local Inductive Heating Method Using Novel High-Temperature Implant for Thermal Treatment of Luminal Organs, IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 57 (2009) 2574-2580.

[510] Y.-W. Kim, M.-S. Kim, S.-M. Park, J.-P. Kim, S.-B. Song, N. Whang, Y.-S. Lim, Ieee, Optimization of Flexible Substrate for Automotive LED Rear-Lamp, in:  2009 11TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC 2009), 2009, pp. 926-+.

[511] S. Katsas, V. Vache, N. Kamp, THE ORIGIN OF MATT SIDE STREAKINESS IN ALUMINUM ALLOYS, in:  LIGHT METALS 2009, 2009, pp. 1241-+.

[512] S. Kano, S. Matsumoto, N. Ichikawa, Surface Treated PDMS by UV-Vis Light Applied to Micro-fluidic Device, in:  MICROELECTROMECHANCIAL SYSTEMS - MATERIALS AND DEVICES II, 2009, pp. 121-+.

[513] Z. Juhasz, B. Sulik, S. Biri, I. Ivan, K. Tokesi, E. Fekete, S. Matefi-Tempfli, M. Matefi-Tempfli, G. Vikor, E. Takacs, J. Palinkas, Ion guiding in alumina capillaries: MCP images of the transmitted ions, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 267 (2009) 321-325.

[514] J. Jedlinski, Z. Zurek, M. Homa, G. Smola, J. Camra, The Oxide Scale Growth Mechanism on Fe20Cr5Al+RE Alloy in SO2+O-2, in:  DIFFUSION IN MATERIALS - DIMAT2008, 2009, pp. 541-+.

[515] Y. Hu, K. Wang, T.C. Zhu, A light blanket for intraoperative photodynamic therapy, in:  12TH WORLD CONGRESS OF THE INTERNATIONAL PHOTODYNAMIC ASSOCIATION: PHOTODYNAMIC THERAPY: BACK TO THE FUTURE, 2009.

[516] K. Hiramoto, M. Jikumaru, Y. Yamate, E.F. Sato, M. Inoue, Ultraviolet A irradiation of the eye induces immunomodulation of skin and intestine in mice via hypothalomo-pituitary-adrenal pathways, ARCHIVES OF DERMATOLOGICAL RESEARCH, 301 (2009) 239-244.

[517] A. Faltermeier, M. Behr, Effect of bracket base conditioning, AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS, 135 (2009).

[518] E. Di Maio, S. Iannace, G. Mensitieri, L. Sansone, EVALUATION OF FLEXIBLE PACKAGING STRUCTURES FOR HIGH PRESSURE STERILIZATION, ITALIAN JOURNAL OF FOOD SCIENCE, 21 (2009) 162-164.

[519] C.R. de Souza, L.H. Bassoi, J.M. Pinheiro Lima Filho, F.F. Santos da Silva, L.H. Viana, B.F. Dantas, M.S. Pereira, P.R. de Almeida Ribeiro, WATER RELATIONS OF FIELD-GROWN GRAPEVINES IN THE SAO FRANCISCO VALLEY, BRAZIL, UNDER DIFFERENT ROOTSTOCKS AND IRRIGATION STRATEGIES, SCIENTIA AGRICOLA, 66 (2009) 436-446.

[520] L.-X. Chen, G.-P. Cai, J. Pan, Experimental study of delayed feedback control for a flexible plate, JOURNAL OF SOUND AND VIBRATION, 322 (2009) 629-651.

[521] M. Cernak, L. Cernakova, J. Cech, P. St'ahel, APPLICATIONS OF DIELECTRIC BARRIER DISCHARGES FOR INLINE SURFACE TREATMENTS, in:  XVIIITH SYMPOSIUM ON PHYSICS OF SWITCHING ARC, 2009, pp. 21-28.

[522] Y. Cao, Y.C. Shin, Asme, SHOCK WAVE PROPAGATION AND SPALLATION STUDY IN LASER SHOCK PEENING, in:  PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, VOL 1, 2009, pp. 753-762.

[523] V.K. Bhusari, M.V. Mahadik, S.R. Dhaneshwar, Application of a Stability-Indicating HPTLC Method for Quantitative Analysis of Amtolmetin Guacil in a Pharmaceutical Dosage Form, ACTA CHROMATOGRAPHICA, 21 (2009) 299-317.

[524] A. Alkhatib, Y. Watanabe, J.H. Broadhurst, The local enhancement of radiation dose from photons of MeV energies obtained by introducing materials of high atomic number into the treatment region, MEDICAL PHYSICS, 36 (2009) 3543-3548.

[525] J. Zhang, F. Pan, R. Zuo, C. Bai, The low temperature precipitation in commercial-purity aluminium sheets for foils, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 206 (2008) 382-387.

[526] Z. Wang, J.D. Hutchinson, N.E. Hertel, E. Burgett, R.M. Howell, Study of a gold-foil-based multisphere neutron spectrometer, RADIATION PROTECTION DOSIMETRY, 128 (2008) 289-293.

[527] I. Tashlykov-Bushkevich, T. Kozak, Microstructural properties of Al-Fe alloy foils, PRZEGLAD ELEKTROTECHNICZNY, 84 (2008) 92-94.

[528] I.I. Tashlykova-Bushkevich, E.S. Gut'ko, V.G. Shepelevich, S.M. Baraishuk, Structural and Phase Analysis of Rapidly Solidified Al-Fe Alloys, JOURNAL OF SURFACE INVESTIGATION, 2 (2008) 310-316.

[529] K.S. Sandhu, R. Chander, U. Bajwa, B.V.C. Mahajan, Effect of papaya ripening, incorporation of sucrose, liquid glucose and citric acid on papaya leather quality formulations, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 45 (2008) 133-138.

[530] A. Orinak, I. Talian, E.V. Efremov, F. Ariese, R. Oriaakova, Diterpenoic acids analysis using a coupled TLC-surface-enhanced Raman spectroscopy system, CHROMATOGRAPHIA, 67 (2008) 315-319.

[531] M. Nakada, V. Menezes, A. Kanno, S.H.R. Hossein, K. Takayama, Shock wave based biolistic device for DNA and drug delivery, JAPANESE JOURNAL OF APPLIED PHYSICS, 47 (2008) 1522-1526.

[532] C.O. Mohan, C.N. Ravishankar, T.K.S. Gopal, J. Bindu, Thermal processing of prawn 'kuruma' in retortable pouches and aluminium cans, INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY, 43 (2008) 200-207.

[533] V. Menezes, K. Takayama, A. Gojani, S.H.R. Hosseini, Shock wave driven microparticles for pharmaceutical applications, SHOCK WAVES, 18 (2008) 393-400.

[534] S. Madan, K.S. Sandim, U. Bajwa, P.P. Sahota, Effect of KMS treatment and storage on the quality of dried tomato halves, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 45 (2008) 474-479.

[535] J.M. Lopera, P.J. Villegas, F.F. Linera, F. Hernandez-Magadan, J. Martin-Ramos, J. Diaz, G. Vecino, J.L. Rendueles, Flatten it out, IEEE INDUSTRY APPLICATIONS MAGAZINE, 14 (2008) 62-66.

[536] J.-M. Kim, J.-P. Jung, Y.N. Zhou, J.-Y. Kim, Ambient temperature ultrasonic bonding of Si-dice using Sn-3.5wt.%Ag, JOURNAL OF ELECTRONIC MATERIALS, 37 (2008) 324-330.

[537] K. Kamasaki, T. Yakou, High-temperature Aluminizing Treatment of Stainless Steels Using Aluminum Foil, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 94 (2008) 290-298.

[538] D.M. Kadam, D.V.K. Samuel, P. Chandra, H.S. Sikarwar, Impact of processing treatments and packaging material on some properties of stored dehydrated cauliflower, INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY, 43 (2008) 1-14.

[539] Z. Jing, P.A.N. Fusheng, Z.U.O. Rulin, Analysis of pinhole defect formation mechanism in aluminium foil, Heat Treatment of Metals, 33 (2008) 20-23.

[540] Z. Jianxin, X.U.E. Lihua, L.I. Jinxia, Chemical Control Alternates the Contribution of Non-leaf Photosynthetic Organs to Seed Yield in Soybean, Soybean Science, 27 (2008) 74-78.

[541] L.I. Jianping, A.I. Jiangbo, H.U. Shicheng, W. Xiaochong, Numerical simulation of aluminum coil temperature field in annealing furnace by ANSYS software, Heat Treatment of Metals, 33 (2008) 97-100.

[542] M. Janecek, W.W. Moses, Optical Reflectance Measurements for Commonly Used Reflectors, IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 55 (2008) 2432-2437.

[543] Y.S. Hadi, H.S. Wuisang, N. Hadjib, M. Utama, Effect of urea concentration and vacuum treatment on physical and mechanical properties of methyl metacrylate bamboo, MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 484 (2008) 517-522.

[544] X. Fu, X. He, Fabrication of super-hydrophobic surfaces on aluminum alloy substrates, APPLIED SURFACE SCIENCE, 255 (2008) 1776-1781.

[545] K.R. DePriest, Benchmark experiments/calculations of neutron environments in the annular core research reactor, in:  REACTOR DOSIMETRY: 12TH INTERNATIONAL SYMPOSIUM, 2008, pp. 98-108.

[546] M. Cieslar, M. Slamova, M. Hajek, J. Vesely, Effect of thermomechical pretreatment on mechanical properties of modified Al-Mn-Fe-Si based alloys, in:  MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE V, 2008, pp. 325-+.

[547] C.-H. Chiu, C.-C. Lin, Formation mechanisms and atomic configurations of nitride phases at the interface of aluminum nitride and titanium, JOURNAL OF MATERIALS RESEARCH, 23 (2008) 2221-2228.

[548] S. Canic, D. Rosenstrauch, Use of auricular chondrocytes for lining artificial surfaces: A mathematical model, IEEE TRANSACTIONS ON NANOBIOSCIENCE, 7 (2008) 240-245.

[549] G.U.O. Bin, W. Chunju, S. Debin, Z. Jian, Micro -parts massive production technology based on micro -forming, Journal of Functional Materials and Devices, 14 (2008) 278-282.

[550] V.D. Bhatt, R.S. Soman, M.A. Miller, G.B. Kasting, Permeation of tecnazene through human skin in vitro as assessed by HS-SPME and GC-MS, ENVIRONMENTAL SCIENCE & TECHNOLOGY, 42 (2008) 6587-6592.

[551] C. Berlinet, P. Brat, V. Ducruet, Quality of orange juice in barrier packaging material, PACKAGING TECHNOLOGY AND SCIENCE, 21 (2008) 279-286.

[552] N. Ayrilmis, Z. Candan, S. Hiziroglu, Physical and mechanical properties of cardboard panels made from used beverage carton with veneer overlay, MATERIALS & DESIGN, 29 (2008) 1897-1903.

[553] X. Zhou, Y. Fang, P. Zhang, A new substrate for surface enhanced Raman scattering of dye Sudan molecules, SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY, 67 (2007) 122-124.

[554] S. Zhao, D.A. Wolfe, T.-S. Huang, G.S. Frankel, Generalized model for IGC growth in aluminum alloys, JOURNAL OF STATISTICAL PLANNING AND INFERENCE, 137 (2007) 2405-2412.

[555] A. Yasui, F. Kimura, T. Kiyoshi, T. Kimura, J. Yeonhwan, S. Sakurai, Microdomain orientation in chelate-doped block copolymers by a high magnetic field, KOBUNSHI RONBUNSHU, 64 (2007) 317-323.

[556] Z.G. Weinberg, Y. Chen, R. Pinto, S. Sela, Fate of inoculated Escherichia coli in hay, JOURNAL OF APPLIED MICROBIOLOGY, 102 (2007) 1537-1543.

[557] N. Toyosugi, H. Yamada, D. Minkov, M. Morita, T. Yamaguchi, S. Imai, Estimation of soft X-ray and EUV transition radiation power emitted from the MIRRORCLE-type tabletop synchrotron, JOURNAL OF SYNCHROTRON RADIATION, 14 (2007) 212-218.

[558] P.A. Sivtsova, V.G. Shepelevich, A study of rapidly solidified foils of an alloy of the Al-Cr-Fe system, METAL SCIENCE AND HEAT TREATMENT, 49 (2007) 284-287.

[559] N.H. Singleton, M. Essa, E. Al-Aradi, N.L. Velante, Failure analysis of some aluminium alloys used to produce aluminium containers especially three compartment and airline trays, in:  Aluminum Alloys for Transportation, Packaging, Aerospace and Other Applications, 2007, pp. 51-60.

[560] A. Sharma, M. Gonuguntla, R. Mukherjee, S.A. Subramanian, R.C. Pangule, Self-organized meso-patterning of soft solids by controlled adhesion: Elastic contact lithography, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 7 (2007) 1744-1752.

[561] S. Rahnema, R. Borton, Determination of the effects of Fis1h vs plant and feather meal-based diets on the growth and health of rainbow trout, JOURNAL OF APPLIED ANIMAL RESEARCH, 32 (2007) 113-117.

[562] M.M. Pithon, M.V. de Oliveira, A.C. de Oliveira Ruellas, A.M. Bolognese, F.L. Romano, Shear bond strength of orthodontic brackets to enamel under different surface treatment conditions, JOURNAL OF APPLIED ORAL SCIENCE, 15 (2007) 127-130.

[563] P. Miecinskas, K. Leinartas, V. Uksiene, E. Juzeliunas, QCM study of microbiological activity during long-term exposure to atmosphere - aluminium colonisation by Aspergillus Niger, JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 11 (2007) 909-913.

[564] J. Li, X. Wang, J. Xie, Study of Parameter-adaptive Fuzzy Controller in Temperature Control System Based on PLC, 微计算机信息. 测控自动化, 23 (2007) 21-23.

[565] O. Keles, M. Dundar, Aluminum foil: Its typical quality problems and their causes, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 186 (2007) 125-137.

[566] L.I. Jianping, W. Xiaochong, X.I.E. Jinghua, Temperature Control System of Fuzzy Parameter-adaptive Based on PROFIBUS-DP, Intstrument Technique and Sensor, (2007) 70-73.

[567] J. Jarrige, T. Joyeux, J.P. Lecompte, J.C. Labbe, Influence of oxygen on the joining between copper and aluminium nitride, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 27 (2007) 337-341.

[568] S.N. Huh, Y.K. Park, W. Cho, S.W. Ha, Immobilization System for Deep Inhalation Breath Hold in Radiation Therapy: Feasibility Study, in:  WORLD CONGRESS ON MEDICAL PHYSICS AND BIOMEDICAL ENGINEERING 2006, VOL 14, PTS 1-6, 2007, pp. 1754-+.

[569] S.H.I. Huaqian, X.I.A. Shibin, PAC Reclaimed from Acid Cleaning Wastewater: Preparation and Application, Enuivonmental Science and Technology, 30 (2007) 22-23,26.

[570] K.O. Honikel, Current information from the international meat research, FLEISCHWIRTSCHAFT, 87 (2007) 80-83.

[571] H.K. Christian-Pandya, S. Vaidyanathan, C. Ko, F.L. Beyer, M.E. Galvin, Efficient flexible devices using a statistical copolymer of oxadiazole containing PPV, SYNTHETIC METALS, 157 (2007) 120-124.

[572] C.J. Byrne, A.M. Kueck, S.P. Baker, P.H. Steen, In situ manipulation of cooling rates during planar-flow melt spinning processing, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 459 (2007) 172-181.

[573] Z. Zhan, Y. He, D. Wang, W. Gao, Cladding inner surface of steel tubes with Al foils by ball attrition and heat treatment, SURFACE & COATINGS TECHNOLOGY, 201 (2006) 2684-2689.

[574] H. Yang, X. Chang, W. Hou, J. Wang, TEM specimen preparation for Al-based amorphous alloys, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 22 (2006) 655-658.

[575] J. Yamazaki, K. Miyoshi, In vitro asymbiotic germination of immature seed and formation of protocorm by Cephalanthera falcata (Orchidaceae), ANNALS OF BOTANY, 98 (2006) 1197-1206.

[576] L. Xue, J. Zhang, RELATIONSHIP BETWEEN NON-LEAF PHOTOSYNTHETIC ORGANS OF SOYBEAN AND SEED WEIGHT AT POD-FILLING DATE, Soybean Science, 25 (2006) 425-428.

[577] J. Xianquan, L.I. Ning, Z. Xiujin, Z. Wei, H.E. Jian, H.E. Hong, L.I. Chunci, Study on tensile test in low-high temperature applied to Al-Mn-Fe-Si hydrophilic foil, Journal of Functional Materials, 37 (2006) 1295-1297,1302.

[578] H. Utsunomiya, M.P.F. Sutcliffe, H.R. Shercliff, D.B. Miller, Experimental investigation of roughening of the matt surface in pack rolling, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 177 (2006) 501-504.

[579] R. Usberti, E.H. Roberts, R.H. Ellis, Prediction of cottonseed longevity, PESQUISA AGROPECUARIA BRASILEIRA, 41 (2006) 1435-1441.

[580] S. Turhan, Aluminium contents in baked meats wrapped in aluminium foil, MEAT SCIENCE, 74 (2006) 644-647.

[581] H. Tao, Q.U. Jiahui, Z. Zhenggui, W. Fu, Z.U.O. Liang, Effect of Annealing Technique and Speed Ratio on Micro-orientation in Cross Shear Rolled High Purity Aluminum Foils, Materials for Mechanical Engineering, 30 (2006) 13-16.

[582] Z. Stepniewska, P. Misztal, Oxygenation level and gas dynamics in a loess soil suspension after exposure to visible light, in:  SOIL MANAGEMENT FOR SUSTAINABILITY, 2006, pp. 328-+.

[583] E.J. Rook, J.M. van Ree, W. van den Brink, M.J.X. Hillebrand, A.D.R. Huitema, V.M. Hendriks, J.H. Beijnen, Pharmacokinetics and pharmacodynamics of high doses of pharmaceutically prepared heroin, by intravenous or by inhalation route in opioid-dependent patients, BASIC & CLINICAL PHARMACOLOGY & TOXICOLOGY, 98 (2006) 86-96.

[584] E.J. Rook, A.D.R. Huitema, W. van den Brink, J.M. van Ree, J.H. Beijnen, Population pharmacokinetics of heroin and its major metabolites, CLINICAL PHARMACOKINETICS, 45 (2006) 401-417.

[585] G.I. Prokopenko, M.O. Vasiliev, B.M. Mordyuk, V.S. Skorodzievs'ky, M.S. Mashovets, Surface hardening of a BT3-1 alloy with the application of ultrasonic shock processing, METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 28 (2006) 781-792.

[586] A. Pietropaolo, C. Andreani, A. Filabozzi, R. Senesi, G. Gorini, E. Perelli-Cippo, M. Tardocchi, N.J. Rhodes, E.M. Schooneveld, DINS measurements on VESUVIO in the Resonance Detector configuration: Proton mean kinetic energy in water, JOURNAL OF INSTRUMENTATION, 1 (2006).

[587] F.N. Nguyen, J.C. Berg, Adhesion promotion of poly(phenylene sulfide) to aluminum treated with silane coupling agents, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 20 (2006) 197-208.

[588] T.H. Muster, A.E. Hughes, Applications and limitations of scanning kelvin probe force microscopy for the surface analysis of aluminum alloys, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 153 (2006) B474-B485.

[589] T.X. Liu, S.S. Liu, Experience-altered oviposition responses to a neem-based product, Neemix (R), by the diamondback moth, Plutella xylostella, PEST MANAGEMENT SCIENCE, 62 (2006) 38-45.

[590] M.-w. Li, H.-f. Liu, X.-l. Wang, C.-n. Tong, F.-f. Yin, X.-x. Bian, L. Zhang, Key techniques of automatic gauge control and profile control for aluminium strip and foil, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 16 (2006) S1595-S1599.

[591] M.G. Klous, W.C. Lee, W. van den Brink, J.M. van Ree, J.H. Beijnen, Volatilisation of diacetylmorphine: In vitro simulation of 'chasing the dragon', PHARMAZIE, 61 (2006) 438-445.

[592] S.H. Kim, K. Chattopadhyay, B.J. Inkson, G. Mobus, W.T. Kim, D.H. Kim, Spontaneous formation of the B2 phase from a decagonal quasicrystal under reduced constraint, JOURNAL OF MATERIALS SCIENCE, 41 (2006) 6081-6086.

[593] Z. Jing, P.A.N. Fusheng, Z.U.O. Rulin, W. Wengao, Medium temperature phase transformation in AA1235 aluminium sheets for foils, The Chinese Journal of Nonferrous Metals, 16 (2006) 1394-1399.

[594] K. Delijic, V. Asanovic, D. Radonjic, Downstream processing of some Al-Fe-Mn-Si and Al-Fe-Si TRC alloys and its influence on sheet/foil properties, in: D.P. Uskokovic, S.K. Milonjic, D.I. Rakovic (Eds.) RECENT DEVELOPMENTS IN ADVANCED MATERIALS AND PROCESSES, 2006, pp. 543-548.

[595] M. Crumbach, T. Quested, R. Hamerton, Industrial application of through-process modelling II: Microstructural models and descriptors required for thermo-mechanical processing, in: W.J. Poole, M.A. Wells, D.J. Lloyd (Eds.) ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, pp. 1511-1518.

[596] J.M. Corstens, M.J. van der Wiel, An optimization model of targets for resonant transition radiation in the X-ray range, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 251 (2006) 261-268.

[597] U.-C. Chen, C.-N. Hsia, D.C. Agrawal, H.-S. Tsay, Influence of ventilation closures on plant growth parameters, acclimation and anatomy of leaf surface in Scrophularia yoshimurae Yamazaki - a medicinal plant native to Taiwan, BOTANICAL STUDIES, 47 (2006) 259-266.

[598] U.C. Chen, C.N. Hsia, M.S. Yeh, D.C. Agrawal, H.S. Tsay, In vitro micropropagation and ex vitro acclimation of Bupleurum kaoi - An endangered medicinal plant native to Taiwan, IN VITRO CELLULAR & DEVELOPMENTAL BIOLOGY-PLANT, 42 (2006) 128-133.

[599] S. Borodziuk, N.N. Demchenko, S.Y. Gus'kov, K. Jungwirth, M. Kalal, A. Kasperczuk, B. Kralikova, E. Krousky, J. Limpouch, K. Masek, P. Pisarczyk, T. Pisarczyk, M. Pfeifer, K. Rohlena, V.B. Rozanov, J. Skala, J. Ullschmied, Flyer target acceleration and energy transfer at its collision with massive targets, in:  PLASMA 2005, 2006, pp. 307-+.

[600] X. Zhang, W. Wu, X. Jian, Z. Zhou, Precipitation behavior of AA3003 aluminium alloy during annealing, The Chinese Journal of Nonferrous Metals, 15 (2005) 674-679.

[601] G.J. Tatlock, H. Al-Badairy, R. Bachorczyk-Nagy, R. Fordham, The effect of gas composition and contaminants on the lifetime of surface-treated FeCrAIRE alloys, MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 56 (2005) 867-873.

[602] S. Rahnema, R. Borton, E. Shaw, Determination of the effects of fish vs plant vs meat protein-based diets on the growth and health of rainbow trout, JOURNAL OF APPLIED ANIMAL RESEARCH, 27 (2005) 77-80.

[603] W.M. Pragnell, H.E. Evans, D. Naumenko, W.J. Quadakkers, Aluminium depletion in FeCrAlY steel during transitional alumina formation, MATERIALS AT HIGH TEMPERATURES, 22 (2005) 561-566.

[604] Y. Peng, W. Chen, Z. Wang, F. Xiao, Damage of Bonding Force on IC Aluminum Pad in COF Structure, Chinese Journal of Semiconductors, 26 (2005) 209-214.

[605] H. Oouchi, Insecticidal properties of a juvenoid, pyriproxyfen, on all life stages of the diamondback moth, Plutella xylostella (Lepidoptera : Yponomeutidae), APPLIED ENTOMOLOGY AND ZOOLOGY, 40 (2005) 145-149.

[606] S. Ono, T. Makino, R.S. Alwitt, Crystallographic pit growth on aluminum(100), JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 152 (2005) B39-B44.

[607] V. Musilova, P. Hanzelka, T. Kralik, A. Srnka, Low temperature radiative properties of materials used in cryogenics, CRYOGENICS, 45 (2005) 529-536.

[608] G. Muneuchi, S. Suzuki, H.H. Igawa, Aluminum foil treatment combined with basic fibroblast growth factor (bFGF) for gangrene of the fingertip caused by collagen disease, SCANDINAVIAN JOURNAL OF PLASTIC AND RECONSTRUCTIVE SURGERY AND HAND SURGERY, 39 (2005) 312-314.

[609] A.B. Lysenko, N.A. Korovina, Y.A. Yakunin, G.P. Brekharya, A.P. Shpak, Treatment of alloys with fusion of a surface, METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 27 (2005) 1503-1518.

[610] H. Liu, Q. Yang, A. He, Finite element analysis of roll end forced-contract in Aluminum foil rolling, Journal of plasticity engineering, 12 (2005) 78-81.

[611] H. Liu, Q. Yang, A. He, Influence of tension on Aluminum foil profile under large width to thickness ratio, Journal of plasticity engineering, 12 (2005) 62-65.

[612] H. Liu, B. Wu, A. He, Q. Yang, C. Chen, Finite element analysis of work roll contour influence on aluminum foil profile, Journal of University Science and Technology Beijing, 27 (2005) 90-93.

[613] F. Liu, H. Josefsson, J.E. Svensson, L.G. Johansson, M. Halvarsson, TEM investigation of the oxide scales formed on a FeCrAlRE alloy (Kanthal AF) at 900 degrees C in dry O-2 and O-2 with 40% H2O, MATERIALS AT HIGH TEMPERATURES, 22 (2005) 521-526.

[614] P.G. Li, X.L. Fu, L.M. Chen, H.Y. Zhang, L.H. Li, W.H. Tang, Growth of alumina microcones by high-temperature oxidization, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 81 (2005) 1269-1272.

[615] Y.B. Lee, D.H. Shin, W.J. Nam, Annealing behavior of 5083 Al alloy deformed at cryogenic temperature, JOURNAL OF MATERIALS SCIENCE, 40 (2005) 797-799.

[616] Y.B. Lee, D.H. Shin, W.J. Nam, Effect of annealing temperature on tensile behavior of 5052 Al alloy deformed at cryogenic temperature, JOURNAL OF MATERIALS SCIENCE, 40 (2005) 1313-1315.

[617] V.N. Korobenko, A.D. Rakhel, A.I. Savvatimski, V.E. Fortov, Measurement of the electrical resistivity of hot aluminum passing from the liquid to gaseous state at supercritical pressure, PHYSICAL REVIEW B, 71 (2005).

[618] M. Kocik, J. Mizeraczyk, R. Barbucha, R. Queitsch, A. Emmel, N. Sabotinov, I. Kostadinov, Comparison of new generation lasers: MOPA-CuBr laser and Nd : YAG laser used for precision processing of the materials, in:  13th International School on Quantum Electronics: Laser Physics and Applications, 2005, pp. 125-129.

[619] M.N. Keene, K.P. Humphrey, T.J. Horton, Actively shielded, adaptively balanced SQUID gradiometer system for operation aboard moving platforms, IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 15 (2005) 761-764.

[620] D.M. Kadam, Lata, D.V.K. Samuel, A.K. Pandey, Influence of different treatments on dehydrated cauliflower quality, INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY, 40 (2005) 849-856.

[621] Y. Isomoto, S. Mihara, H. Hasegawa, Investigation of surface treatment technology using water droplet impingement, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 69 (2005) 703-706.

[622] H. Ida, J. Kawai, Portable x-ray fluorescence spectrometer with a pyroelectric x-ray generator, X-RAY SPECTROMETRY, 34 (2005) 225-229.

[623] J. Hirsch, Teksture and anisotropy in industrial applications of aluminium alloys, ARCHIVES OF METALLURGY AND MATERIALS, 50 (2005) 21-34.

[624] Y. Harada, L. Wang, Y. Matsumoto, N. Matsuo, Lining of titanium alloys with hard materials by shot peening, in: Z.Y. Zhong, H. Saka, T.H. Kim, E.A. Holm, Y.F. Han, X.S. Xie (Eds.) PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, pp. 2699-2702.

[625] N. Harada, S. Otsuka, M. Nishiyama, S. Matsumoto, Influences of indigenous phototrophs on methane emissions from a straw-amended paddy soil, BIOLOGY AND FERTILITY OF SOILS, 41 (2005) 46-51.

[626] H. El Kadiri, R. Molins, Y. Bienvenu, M.F. Horstemeyer, Abnormal high growth rates of metastable aluminas on FeCrAl alloys, OXIDATION OF METALS, 64 (2005) 63-97.

[627] B. Courant, J.J. Hantzpergue, L. Avril, S. Benayoun, Structure and hardness of titanium surfaces carburized by pulsed laser melting with graphite addition, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 160 (2005) 374-381.

[628] L.C.L. Chen, B. Jha, Roll bonding and the application in making FeCrAl alloy, in: Z.Y. Zhong, H. Saka, T.H. Kim, E.A. Holm, Y.F. Han, X.S. Xie (Eds.) PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, pp. 661-664.

[629] G.P. Chaudhari, V.L. Acoff, Processing of gamma titanium aluminwe sheets using rolling and reactive synthesis, in:  TRENDS IN MATERIALS AND MANUFACTURING TECHNOLOGIES FOR TRANSPORTATION INDUSTRIES AND POWDER METALLURGY RESEARCH AND DEVELOPMENT IN THE TRANSPORTATION INDUSTRY, 2005, pp. 199-204.

[630] S. Chang, M. Su, G. Qin, Y. Wu, H. Zhao, THE TEMPERATURE EFFECT OF LOW-ENERGY ION BEAM IMPLANTATION ON SEED, Acta Agriculturae Nucleatae Sinica, 19 (2005) 309-311.

[631] R. Bhattacharya, S. Wagner, Y.J. Tung, J.R. Esler, M. Hack, Organic LED pixel array on a dome, PROCEEDINGS OF THE IEEE, 93 (2005) 1273-1280.

[632] E.G. Araujo, J.A.S. Tenorio, Cellular concrete with addition of aluminum recycled foil powders, in: L. Salgado, F.A. Filho (Eds.) ADVANCED POWDER TECHNOLOGY IV, 2005, pp. 198-204.

[633] Z.Y. Xie, Y.Q. Li, F.L. Wong, L.S. Hung, Fabrication of flexible organic top-emitting devices on steel foil substrates, MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 106 (2004) 219-223.

[634] M.U. Ventura, A.R. Panizzi, Responses of Neomegalotomus parvus (Hemiptera : alydidae) to color and male-lured traps, BRAZILIAN ARCHIVES OF BIOLOGY AND TECHNOLOGY, 47 (2004) 531-535.

[635] R.F. Van Toor, C.M. Till, D.E. James, D.A.J. Teulon, Evaluation of UV reflective mulches for protection against thrips (Thrips tabaci) in onion (Allium cepa) crops, in:  New Zealand Plant Protection, Vol 57, 2004, pp. 209-213.

[636] H. Tsubakino, A. Nogami, Y. Yamamoto, A. Yamamoto, M. Terasawa, T. Mitamura, A. Kinomura, Y. Horino, Surface segregation phenomena of solute elements in Al-Pb and Al-Fe dilute binary alloys, APPLIED SURFACE SCIENCE, 238 (2004) 464-468.

[637] Y. Satoh, T. Yoshiie, H. Mori, M. Kiritani, Formation of stacking-fault tetrahedra in aluminum irradiated with high-energy particles at low-temperatures, PHYSICAL REVIEW B, 69 (2004).

[638] R.Y. Sato-Berru, J. Medina-Valtierra, C. Medina-Gutierrez, C. Frausto-Reyes, Quantitative NIR-Raman analysis of methyl-parathion pesticide microdroplets on aluminum substrates, SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY, 60 (2004) 2231-2234.

[639] H. Sanou, S. Kambou, Z. Teklehaimanot, M. Dembele, H. Yossi, S. Sina, L. Djingdia, J.M. Bouvet, Vegetative propagation of Vitellaria paradoxa by grafting, AGROFORESTRY SYSTEMS, 60 (2004) 93-99.

[640] F. Liu, R. Wiener, J. Saffer, G.M. Mayers, W. Kononenko, F.M. Newcomer, R. Van Berg, J.S. Karp, Performance evaluation of a 64-pixel positron-sensitive surgical probe in simulated sentinel lymph node surgical environment, in:  2004 IEEE NUCLEAR SCIENCE SYMPOSIUM CONFERENCE RECORD, VOLS 1-7, 2004, pp. 3559-3564.

[641] F.Q. Lang, Z.M. Yu, S. Gedevanishvili, S.C. Deevi, S. Hayashi, T. Narita, Sulfidation behavior of Fe-40Al sheet in H-2-H2S mixtures at high temperatures, INTERMETALLICS, 12 (2004) 469-475.

[642] D. Krefting, R. Mettin, W. Lauterborn, High-speed observation of acoustic cavitation erosion in multibubble systems, ULTRASONICS SONOCHEMISTRY, 11 (2004) 119-123.

[643] R.C. Huang, K.R. Hebert, T. Gessmann, K.G. Lynn, Effect of impurities on interfacial void formation in aluminum, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 151 (2004) B227-B232.

[644] Z.W. Gu, C.W. Sun, J.H. Zhao, N. Zhang, One-dimensional numerical simulation of laser-driven flyer plates, JOURNAL OF APPLIED PHYSICS, 96 (2004) 3486-3490.

[645] S. Fotopoulos, T.E. Sotiropoulos, In vitro propagation of the peach rootstock: the effect of different carbon sources and types of sealing material on rooting, BIOLOGIA PLANTARUM, 48 (2004) 629-631.

[646] R.B. Dean, Manuscripts: then and now, WASTE MANAGEMENT & RESEARCH, 22 (2004) 323-323.

[647] A.R. de Arias, M.J. Lehane, C.J. Schofield, M. Maldonado, Pyrethroid insecticide evaluation on different house structures in a Chagas disease endemic area of the Paraguayan Chaco, MEMORIAS DO INSTITUTO OSWALDO CRUZ, 99 (2004) 657-662.

[648] C. Chavez, C.D. Coufal, P.L. Niemeyer, J.B. Carey, R.E. Lacey, R.K. Miller, R.C. Beier, Impact of dietary supplemental methionine sources on sensory measurement of odor-related compounds in broiler excreta, POULTRY SCIENCE, 83 (2004) 1655-1662.

[649] C. Chavez, C.D. Coufal, R.E. Lacey, J.B. Carey, The impact of methionine source on poultry fecal matter odor volatiles, POULTRY SCIENCE, 83 (2004) 359-364.

[650] C. Chavez, C.D. Coufal, J.B. Carey, R.E. Lacey, R.C. Beier, J.A. Zahn, The impact of supplemental dietary methionine sources on volatile compound concentrations in broiler excreta, POULTRY SCIENCE, 83 (2004) 901-910.

[651] G.L. Case, P.P. Altice, M.L. Cherry, J. Isbert, D. Patterson, J.W. Mitchell, Measurements of Compton scattered transition radiation at high Lorentz factors, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 524 (2004) 257-263.

[652] N.W. Zheng, J. Fan, D.X. Ma, T. Wang, Theoretical study of energy levels and transition probabilities of singly ionized aluminum (Al II), JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, 72 (2003) 3091-3096.

[653] K. Yasuda, T. Higuchi, K. Shiiyama, C. Kinoshita, K. Tanaka, M. Kutsuwada, Effects of the electric field on the aggregation of point defects in ion-irradiated alpha-Al2O3, PHILOSOPHICAL MAGAZINE LETTERS, 83 (2003) 21-28.

[654] B. Wunder, S. Melzer, Experimental evidence on phlogopitic mantle metasomatism induced by phengite dehydration, EUROPEAN JOURNAL OF MINERALOGY, 15 (2003) 641-647.

[655] J.C.Y. Wang, S.H. Hu, C.Y. Lin, Lethal effect of microwaves on spores of Bacillus spp, JOURNAL OF FOOD PROTECTION, 66 (2003) 604-609.

[656] G. Wang, K. Yan, J. Yan, The Influence of H_2SO_4/HCl Ratio and Al~(3+)Content on the Tunnel Growth of High Purity Aluminum Foil, Electronic Components & Materials, 22 (2003) 10-12.

[657] V.V. Semak, J.T. Schriempf, G.A. Knorovsky, D.O. MacCallum, Application of melt ejection criterion in simulation of micro-machining with laser, in:  PHOTON PROCESSING IN MICROELECTRONICS AND PHOTONICS II, 2003, pp. 530-541.

[658] T. Sasaki, T. Yakou, Aluminizing treatment of mild steel using aluminum foil, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 89 (2003) 1227-1232.

[659] J.O. Noyce, J.F. Hughes, Bactericidal effects of negative and positive ions generated in nitrogen on starved Pseudomonas veronii, JOURNAL OF ELECTROSTATICS, 57 (2003) 49-58.

[660] D. Naumenko, W.J. Quadakkers, A. Galerie, Y. Wouters, S. Jourdain, Parameters affecting transient oxide formation on FeCrAl based foil and fibre materials, MATERIALS AT HIGH TEMPERATURES, 20 (2003) 287-293.

[661] K. Morita, Y. Ogawa, C.N. Thai, F. Tanaka, Soft X-ray image analysis to detect foreign materials in foods, FOOD SCIENCE AND TECHNOLOGY RESEARCH, 9 (2003) 137-141.

[662] P. McKenna, K.W.D. Ledingham, T. McCanny, R.P. Singhal, I. Spencer, E.L. Clark, F.N. Beg, K. Krushelnick, M.S. Wei, J. Galy, J. Magill, R.J. Clarke, K.L. Lancaster, P.A. Norreys, K. Spohr, R. Chapman, Effect of target heating on ion-induced reactions in high-intensity laser-plasma interactions, APPLIED PHYSICS LETTERS, 83 (2003) 2763-2765.

[663] C. Liu, Z. Fang, X. Zhang, H. Chen, Influence of Surface Treatment on the Protracted Hydrphilicity of Hydrophilic Aluminium Foil, Surface Technology, 32 (2003) 51-54.

[664] C. Liu, Z. Fang, H. Chen, X. Zhan, A high-efficient degreaser for aluminium foil for air conditioner, Corrosion Science and Protection Technology, 15 (2003) 59-61.

[665] G.M. Liang, W. Chen, T.X. Liu, Effects of three neem-based insecticides on diamondback moth (lepidoptera : plutellidae), CROP PROTECTION, 22 (2003) 333-340.

[666] Y.L. Lee, R.K. Shiue, S.K. Wu, The microstructural evolution of infrared brazed Fe3Al by BNi-2 braze alloy, INTERMETALLICS, 11 (2003) 187-195.

[667] Y. Harada, H. Kosugi, S. Maki, M. Umemura, E. Nagashima, Lining of magnesium alloys with foils using shot peening, in: Y. Kojima, T. Aizawa, K. Higashi, S. Kamado (Eds.) MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 2003, pp. 963-968.

[668] K. El-Awady, C.D. Schaper, T. Kailath, Temperature cycling and control system for photosensitive materials processing, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 21 (2003) 1459-1465.

[669] A.P. del Pino, P. Serra, J.L. Morenza, Laser surface processing of titanium in air: Influence of scan traces overlapping, JOURNAL OF LASER APPLICATIONS, 15 (2003) 120-123.

[670] H. Das, Quality and stability of marinated and cooked goat meat stored at ambient temperature, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 40 (2003) 615-621.

[671] C. Dartevelle, E. McAlpine, G.E. Thompson, M.R. Alexander, Low pressure plasma treatment for improving the strength and durability of adhesively bonded aluminium joints, SURFACE & COATINGS TECHNOLOGY, 173 (2003) 249-258.

[672] G.P. Chaudhari, V.L. Acoff, Effect of rolling strain on the processing of gamma titanium aluminides by roll bonding and reaction annealing, in:  GAMMA TITANIUM ALUMINIDES 2003, 2003, pp. 287-290.

[673] A.N. Buckley, A.J. Hartmann, R.N. Lamb, A.P.J. Stampfl, J.W. Freeland, I. Coulthard, Threshold AlKLL Auger spectra of oxidized aluminium foils, SURFACE AND INTERFACE ANALYSIS, 35 (2003) 922-931.

[674] H. Asanuma, O. Haga, J. Ohira, K. Takemoto, M. Imori, Fabrication of CFRP/Al active laminates, JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 46 (2003) 478-483.

[675] H. Al-Badairy, D. Naumenko, J. Le Coze, G.J. Tatlock, W.J. Quadakkers, Significance of minor alloying additions and impurities on alumina scale growth and adherence in FeCrAl alloys, MATERIALS AT HIGH TEMPERATURES, 20 (2003) 405-412.

[676] G. Aguilar, G.X. Wang, J.S. Nelson, Dynamic behavior of cryogen spray cooling: Effects of spurt duration and spray distance, LASERS IN SURGERY AND MEDICINE, 32 (2003) 152-159.

[677] Y.D. Xiao, W.X. Li, W. Li, S.R. Li, Z.Q. Ma, Decomposition processing and precipitation hardening of rapidly solidified Al-Cr-Y-Zr alloy, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 12 (2002) 16-20.

[678] W. Wang, T. Liang, Three-Dimensional Contact Finite Element Analysis of Foil Strip Rolling, Mechanical Science and Technology, 21 (2002) 882-884.

[679] H. Tsubakino, A. Nogami, A. Yamamoto, M. Terasawa, T. Mitamura, T. Yamanoi, A. Kinomura, Y. Horino, Effect of heat-treatment in different environments on surface segregation phenomena of lead in aluminum-100 ppm lead alloy, in: P.J. Gregson, S.J. Harris (Eds.) ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, pp. 435-440.

[680] A.A. Onilude, A.I. Sanni, O.A. Olaoye, S.T. Ogunbanwo, Influence of lactic cultures on the quality attributes of tsire, a West African stick meat, WORLD JOURNAL OF MICROBIOLOGY & BIOTECHNOLOGY, 18 (2002) 615-619.

[681] K. Nagai, T. Norimatsu, T. Yamanaka, T. Nishibe, N. Ozaki, K. Takamatsu, T. Ono, M. Nakano, K.A. Tanaka, Single molecular membrane glue technique for laser driven shock experiments, JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 41 (2002) L1184-L1186.

[682] B.A. Morris, Influence of stress on peel strength of acid copolymers to foil, JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 21 (2002) 1243-1255.

[683] A. Khellaf, A. Seeger, R.M. Emrick, Quenching studies of lattice vacancies in high-purity aluminium, MATERIALS TRANSACTIONS, 43 (2002) 186-198.

[684] S. Kawabata, Y.H. Li, M. Adachi, H. Maruyama, E. Ozawa, R. Sakiyama, Role of photoreceptor- and sugar-mediated reactions in light dependent anthocyanin production in lily and stock flowers, JOURNAL OF THE JAPANESE SOCIETY FOR HORTICULTURAL SCIENCE, 71 (2002) 220-225.

[685] P. Griss, P. Enoksson, G. Stemme, Micromachined barbed spikes for mechanical chip attachment, SENSORS AND ACTUATORS A-PHYSICAL, 95 (2002) 94-99.

[686] R. Delamare, E. Ntsoenzok, F. Labohm, A. van Veen, Influence of depth in helium desorption from cavities induced by He-3 implantation in silicon, in: V. Raineri, F. Priolo, M. Kittler, H. Richter (Eds.) GETTERING AND DEFECT ENGINEERING IN SEMICONDUCTOR TECHNOLOGY, 2002, pp. 303-307.

[687] H. Das, Effect of marination, packaging and storage period on quality and stability of hurdle processed chevon at refrigeration, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 39 (2002) 507-514.

[688] T. Belmonte, J.M. Thiebaut, D. Mezerette, Role of active species in surface cleaning by an Ar-N-2 atmospheric pressure post-discharge, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 35 (2002) 1919-1926.

[689] Z. Ashitaka, P. Skeldon, G.E. Thompson, K. Shimizu, H. Habazaki, Enrichment behaviour of gallium in heat and surface treatments of Al-Ga foils, CORROSION SCIENCE, 44 (2002) 2725-2735.

[690] K. Yatsui, W.H. Jiang, H. Suematsu, N. Harada, G. Imada, T. Suzuki, Y. Kinemuchi, S.C. Yang, Pulsed power technology and its applications at Extreme Energy-Density Research Institute (EDI), Nagaoka, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 40 (2001) 921-929.

[691] T.W. Tibbitts, U.B. Mokwunye, Leaf epinasty induced by reflection of light from beneath marigold plants, HORTSCIENCE, 36 (2001) 83-84.

[692] M.P.F. Sutcliffe, P. Montmitonnet, Numerical modelling of lubricated foil rolling, REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 98 (2001) 435-442.

[693] D.L. Sokolov, M.R. Bailey, L.A. Crum, Use of a dual-pulse lithotripter to generate a localized and intensified cavitation field, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 110 (2001) 1685-1695.

[694] K.Z. Sheir, A.M. El-Sheikh, M.A. Ghoneim, Synchronous twin-pulse technique to improve efficacy of SWL: Preliminary results of an experimental study, JOURNAL OF ENDOUROLOGY, 15 (2001) 965-974.

[695] H.K. Sharma, R.S. Singhal, P.R. Kulkarni, Effect of packaging under vacuum or under nitrogen on the keeping quality of Danedar khoa, INTERNATIONAL JOURNAL OF DAIRY TECHNOLOGY, 54 (2001) 107-110.

[696] A. Schulz, K.M. Baumgartner, J. Feichtinger, M. Walker, U. Schumacher, A. Eike, K. Herz, F. Kessler, Surface passivation of silicon with the Plasmodul((R)), SURFACE & COATINGS TECHNOLOGY, 142 (2001) 771-775.

[697] S. Rossi, E.L. Dreizin, C.K. Law, Combustion of aluminum particles in carbon dioxide, COMBUSTION SCIENCE AND TECHNOLOGY, 164 (2001) 209-237.

[698] Z. Qin, J.S. Guo, Z.G. Gan, Preparation of the thicker americium targets by molecular plating, APPLIED RADIATION AND ISOTOPES, 54 (2001) 741-744.

[699] S.J.M. Pinson, J. Collins, G.E. Thompson, M.R. Alexander, Atmospheric pressure plasma cleaning of aluminium, TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 79 (2001) 155-159.

[700] Y. Miura, K. Yamada, Y. Ikoma, Distribution of dispersoids in 6000 series aluminum alloys revealed by TEM stereoscopy, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, (2001) 362-369.

[701] V. Massardier, L. Voron, C. Esnouf, J. Merlin, Identification of the nitrides formed during the annealing of a low-carbon low-aluminium steel, JOURNAL OF MATERIALS SCIENCE, 36 (2001) 1363-1371.

[702] M.A. Martinez, C. Guillen, A. Morales, J. Herrero, Arrangement of flexible foil substrates for CuInSe2-based solar cells, SURFACE & COATINGS TECHNOLOGY, 148 (2001) 61-64.

[703] J.J. MacFarlane, J.E. Bailey, T.A. Mehlhorn, G.A. Chandler, T.J. Nash, C. Deeney, M.R. Douglas, Simulating the radiation environment in Z experiments using a 3D view factor code with 1D radiation-hydrodynamics emission modeling, REVIEW OF SCIENTIFIC INSTRUMENTS, 72 (2001) 1228-1231.

[704] G. Feldmann, P.F.P. Fichtner, F.C. Zawislak, Nucleation and growth behavior of Cu-Al precipitates in He implanted and annealed aluminum, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 175 (2001) 432-436.

[705] K.M. Baumgartner, J. Schneider, A. Schulz, J. Feichtinger, M. Walker, Short-time plasma pre-treatment of polytetrafluoroethylene for improved adhesion, SURFACE & COATINGS TECHNOLOGY, 142 (2001) 501-506.

[706] F. Appel, Mechanistic understanding of creep in gamma-base titanium aluminide alloys, INTERMETALLICS, 9 (2001) 907-914.

[707] A. Andoh, S. Taniguchi, T. Shibata, TEM observation of phase transformations of alumina scales formed on Al-deposited Fe-Cr-Al foils, in: R. Streiff, I.G. Wright, R.C. Krutenat, M. Caillet, A. Galerie (Eds.) HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 5, PTS 1 AND 2, 2001, pp. 303-310.

[708] Y.W. Zeng, C.Z. Ji, Study on high dose iron ion implantation in aluminum foil, SURFACE & COATINGS TECHNOLOGY, 128 (2000) 199-204.

[709] K. Yamashita, I. Fujimoto, T. Murakumo, S. Kumai, A. Sato, Observation of glide dislocations in D0(20) ordered Al3Ni, PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 80 (2000) 219-235.

[710] M. Tsuro, M. Koda, M. Inoue, Efficient plant regeneration from multiple shoots formed in the leaf-derived callus of Lavandula vera, using the "open culture system", SCIENTIA HORTICULTURAE, 86 (2000) 81-88.

[711] P.R. Smith, A.H. Rosenberger, M.J. Shepard, R. Wheeler, A P/M approach for the fabrication of an orthorhombic titanium aluminide for MMC applications, JOURNAL OF MATERIALS SCIENCE, 35 (2000) 3169-3179.

[712] V.K. Pandita, S. Nagarajan, Osmopriming of fresh seed and its effect on accelerated ageing in Indian tomato (Lycopersicon esculentum) varieties, INDIAN JOURNAL OF AGRICULTURAL SCIENCES, 70 (2000) 479-480.

[713] K. Noda, T. Nishimura, H. Masuda, T. Kodama, Ion selectivity of rust formed on low-alloy steels under a cyclic wet-and-dry condition, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 64 (2000) 767-770.

[714] G. Mix-Wagner, A.J. Conner, R.J. Cross, Survival and recovery of asparagus shoot tips after cryopreservation using the "droplet" method, NEW ZEALAND JOURNAL OF CROP AND HORTICULTURAL SCIENCE, 28 (2000) 283-287.

[715] P. Mahajan, J. Sahoo, P.C. Panda, Effect of probiotic (Lacto-Sacc) feeding, packaging methods and seasons on the microbial and organoleptic qualities of chicken meat balls during refrigerated storage, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 37 (2000) 67-71.

[716] D.H. Kalantar, B.A. Remington, J.D. Colvin, K.O. Mikaelian, S.V. Weber, L.G. Wiley, J.S. Wark, A. Loveridge, A.M. Allen, A.A. Hauer, M.A. Meyers, Solid-state experiments at high pressure and strain rate, PHYSICS OF PLASMAS, 7 (2000) 1999-2006.

[717] G. Feldmann, P.F.P. Fichtner, F.C. Zawislak, The effects of He implantation on the thermal stability of Cu-Al precipitates in aluminum, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 161 (2000) 1075-1079.

[718] C.H. Fazier, Q. Tian, A. Ozguler, S.A. Morris, W.D. O'Brien, High contrast ultrasound images of defects in food package seals, IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 47 (2000) 530-539.

[719] L.S. Erhardt, D. Deptuck, J.P. Harrison, Transition-edge microcalorimeter for tritium beta decay, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 444 (2000) 92-95.

[720] Z. Ashitaka, G.E. Thompson, P. Skeldon, G.C. Wood, H. Habazaki, K. Shimizu, Influence of thermal and surface treatments on distributions of lead in Al-Pb foils, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 147 (2000) 132-139.

[721] M. Akiyama, K. Shobu, C.N. Xu, K. Nonaka, T. Watanabe, Ceramic microtubes self-formed at room temperature that exhibit a large bending stress, JOURNAL OF APPLIED PHYSICS, 88 (2000) 4434-4436.

[722] Y.H. Zhao, Y.J. Wu, F. Engelmann, M.D. Zhou, S.Y. Chen, Cryopreservation of apple in vitro shoot tips by the droplet freezing method, CRYO-LETTERS, 20 (1999) 109-112.

[723] G. Wilde, H. Sieber, J.H. Perepezko, Glass formation in Al-rich Al-Sm alloys during solid state processing at ambient temperature, JOURNAL OF NON-CRYSTALLINE SOLIDS, 250 (1999) 621-625.

[724] K. Srinivasan, S. Saxena, B.B. Singh, Osmo- and hydropriming of mustard seeds to improve vigour and some biochemical activities, SEED SCIENCE AND TECHNOLOGY, 27 (1999) 785-789.

[725] H.K. Sanghera, J.L. Sullivan, A study of low energy high dose nitrogen ion implantation in iron - Effect of ion energy and current density, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 152 (1999) 65-79.

[726] R.A. Ricks, The deformation models needed by the aluminium industry, PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 357 (1999) 1513-1528.

[727] B.L. Mandhyan, Retention of freshness of guavas with respect to package material, JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE, 36 (1999) 46-48.

[728] J.X. Li, W.L. Zhan, Z.Y. Guo, Z.Y. Sun, G.Q. Xiao, J.C. Wang, X.W. Meng, S.H. Jiang, L.J. Qin, W.S. Zhang, Q.J. Wang, TOF measurement in RIBLL, HIGH ENERGY PHYSICS AND NUCLEAR PHYSICS-CHINESE EDITION, 23 (1999) 231-236.

[729] M. Lapczyna, K.P. Chen, P.R. Herman, H.W. Tan, R.S. Majoribanks, Ultra high repetition rate (133 MHz) laser ablation of aluminum with 1.2-ps pulses, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 69 (1999) S883-S886.

[730] V.M. Kiiko, S.T. Mileiko, Evaluation of the room-temperature strength of oxide fibres produced by the internal-crystallization method, COMPOSITES SCIENCE AND TECHNOLOGY, 59 (1999) 1977-1981.

[731] A. Kato, Induction of bicellular pollen by trifluralin treatment and occurrence of triploids and aneuploids after fertilization in maize, GENOME, 42 (1999) 154-157.

[732] C.W. Jeans, C.M. Heard, A therapeutic dose of primaquine can be delivered across excised human skin from simple transdermal patches, INTERNATIONAL JOURNAL OF PHARMACEUTICS, 189 (1999) 1-6.

[733] M. Hofbeck, H. Singer, G. Buheitel, M. Ries, Balloon valvuloplasty of critical pulmonary valve stenosis in a premature neonate, PEDIATRIC CARDIOLOGY, 20 (1999) 147-149.

[734] D. Duke, H.R. Byers, A.J. Sober, R.R. Anderson, J.M. Grevelink, Treatment of benign and atypical nevi with the normal-mode ruby laser and the Q-switched ruby laser - Clinical involvement but failure to completely eliminate nevomelanocytes, ARCHIVES OF DERMATOLOGY, 135 (1999) 290-296.

[735] S. Denyer, Pharmaceutical properties of fluticasone propionate nasal drops: a new formulation, ALLERGY, 54 (1999) 17-20.

[736] J.V. Visentainer, O.A. Vieira, M. Matsushita, N.E. de Souza, Vitamin C in Barbados cherry Malpighia glabra L. pulp submitted to processing and to different forms of storage, ARCHIVOS LATINOAMERICANOS DE NUTRICION, 48 (1998) 256-259.

[737] M. Ugajin, A. Itoh, M. Akabori, N. Ooka, Y. Nakakura, Irradiation behavior of high uranium-density alloys in the plate fuels, JOURNAL OF NUCLEAR MATERIALS, 254 (1998) 78-83.

[738] P.C. Tortorici, M.A. Dayananda, Phase formation and interdiffusion in Al-clad 430 stainless steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 244 (1998) 207-215.

[739] G. Rysstad, A. Ebbesen, J. Eggestad, Sensory and chemical quality of UHT-milk stored in paperboard cartons with different oxygen and light barriers, FOOD ADDITIVES AND CONTAMINANTS, 15 (1998) 112-122.

[740] M.A. Rudan, D.M. Barbano, A dynamic model for melting and browning of mozzarella cheese during pizza baking, AUSTRALIAN JOURNAL OF DAIRY TECHNOLOGY, 53 (1998) 95-97.

[741] M.H. Ralphs, G.D. Manners, D.R. Gardner, Influence of light and photosynthesis on alkaloid concentration in larkspur, JOURNAL OF CHEMICAL ECOLOGY, 24 (1998) 167-182.

[742] S.R. Payne, C.J. Durham, S.M. Scott, C.E. Devine, The effects of non-vacuum packaging systems on drip loss from chilled beef, MEAT SCIENCE, 49 (1998) 277-287.

[743] P. Nostell, A. Roos, B. Karlsson, Ageing of solar booster reflector materials, SOLAR ENERGY MATERIALS AND SOLAR CELLS, 54 (1998) 235-246.

[744] K.L. Murty, K. Detemple, O. Kanert, J.T.M. Dehosson, In-situ nuclear magnetic resonance investigation of strain, temperature, and strain-rate variations of deformation-induced vacancy concentration in aluminum, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 29 (1998) 153-159.

[745] S. Muguruma, N. Oguri, S. Uchino, J. Kiji, Surface-influence study of Pyrofoil for Curie-point pyrolyzer upon the measurement of reproducibility on pyrogram, BUNSEKI KAGAKU, 47 (1998) 437-441.

[746] T. Momose, E. Hayasaka, K. Saitou, K. Nagayama, S. Abe, Surface cleaning aluminum foil with ozone gas, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 16 (1998) 961-963.

[747] G. Mitchell, T. Kron, M. Back, High dose behind inhomogeneities during medium-energy x-ray irradiation, PHYSICS IN MEDICINE AND BIOLOGY, 43 (1998) 1343-1350.

[748] R.J. Luxmoore, P.J. Hanson, J.J. Beauchamp, J.D. Joslin, Passive nighttime warming facility for forest ecosystem research, TREE PHYSIOLOGY, 18 (1998) 615-623.

[749] M. Koniger, P.R. Wallnofer, Fate of sprout inhibitors propham (IPC) and chlorpropham (CIPC) in potatoes in relation to different cooking techniques, DEUTSCHE LEBENSMITTEL-RUNDSCHAU, 94 (1998) 229-231.

[750] V.H. Hammond, D.M. Elzey, F.E. Wawner, The influence of plasma composition on the quality of spray-deposited nickel aluminide foils, SCRIPTA MATERIALIA, 39 (1998) 139-145.

[751] Y. Champion, S. Hagege, M. Masse, Structural analysis of phases and heterophase interfaces in the zirconium-boron system, JOURNAL OF MATERIALS SCIENCE, 33 (1998) 4035-4041.

[752] R.E. Braeuer, E.M. Puhar, D.B. Mulligan, Being competitive and profitable using small scale solutions the continuous batch fiber recovery system (CBFRS) the tunnel washer, WOCHENBLATT FUR PAPIERFABRIKATION, 126 (1998) 780-783.

[753] H. Abral, P. Schlund, H.G. Sockel, W. Blum, Method for edge-on TEM-observation of cold rolled Al foils, PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 35 (1998) 119-125.

[754] Y. Zhai, T.H. North, Counteracting particulate segregation during transient liquid-phase bonding of MMC-MMC and Al2O3-MMC joints, JOURNAL OF MATERIALS SCIENCE, 32 (1997) 5571-5575.

[755] E. Taguchi, N. Sumida, H. Fujita, Phase separation in Al-rich beta'-NiAl alloy by annealing, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 61 (1997) 369-377.

[756] V. Shepelevich, I. TashlykovaBushkevich, Composition and structural evolution of Al-Me alloys (Me=Fe, Cu, Sb) prepared by means of ultrarapid quenching from the melt studied by RBS technique, in: A.G. Balogh, G. Walter (Eds.) MATERIALS SCIENCE APPLICATIONS OF ION BEAM TECHNIQUES, 1997, pp. 385-388.

[757] S. Sagawa, The effects of reflected light on the photosynthetic rate of middle and lower leaves and seed yield in soybean plants, JAPANESE JOURNAL OF CROP SCIENCE, 66 (1997) 571-577.

[758] K. Ono, R.O. Suzuki, R. Nakahashi, M. Shoda, Iron-based element for low temperature thermoelectric generator, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 83 (1997) 157-161.

[759] S. Omata, Y. Tanaka, T. Ishida, A. Sato, A. Inoue, Nucleation-and-growth kinetics of small crystals in amorphous Al88Ce2Ni9Fe, PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 76 (1997) 387-412.

[760] V.S. Muratov, Structure formation and properties of rapidly quenched aluminum alloys, METAL SCIENCE AND HEAT TREATMENT, 39 (1997) 214-218.

[761] S. Mandl, H. Reuther, J. Brutscher, R. Gunzel, W. Moller, Measured and calculated dose distribution for 2D plasma immersion ion implantation, SURFACE & COATINGS TECHNOLOGY, 93 (1997) 229-233.

[762] D.A. Lifshitz, J.C. Williams, B. Sturtevant, B.A. Connors, A.P. Evan, J.A. McAteer, Quantitation of shock wave cavitation damage in vitro, ULTRASOUND IN MEDICINE AND BIOLOGY, 23 (1997) 461-471.

[763] D.H. Lee, S.H. Lee, N.S. Kwon, J.C. Kim, Light-dependent corneal toxicity in streptozocin-treated rats, INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE, 38 (1997) 995-1002.

[764] O. Klug, G. Parlagh, W. Forsling, Raman spectroscopy of aromatic acids adsorbed on oxidised aluminium foil, JOURNAL OF MOLECULAR STRUCTURE, 410 (1997) 183-188.

[765] S. Kiatkamjornwong, N. Meechai, Enhancement of the grafting performance and of the water absorption of cassava starch graft copolymer by gamma radiation, RADIATION PHYSICS AND CHEMISTRY, 49 (1997) 689-696.

[766] Y. Hirase, Salvage of fingertip amputated at nail level: New surgical principles and treatments, ANNALS OF PLASTIC SURGERY, 38 (1997) 151-157.

[767] O.B. Hansen, J.R. Potter, Rooting of apple, rhododendron, and mountain laurel cuttings from stock plants etiolated under two temperatures, HORTSCIENCE, 32 (1997) 304-306.

[768] R. Hambleton, W.M. Rainforth, H. Jones, Dislocation densities, dispersoid identities and the origins of thermal stability and strengthening in three mechanically alloyed aluminium alloys, PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 76 (1997) 1093-1104.

[769] F.A. Hale, J.M.G. Anthony, Prevention of hypothermia in cats during routine oral hygiene procedures, CANADIAN VETERINARY JOURNAL-REVUE VETERINAIRE CANADIENNE, 38 (1997) 297-299.

[770] J. Dutkiewicz, O. Simmich, R. Scholz, R. Ciach, Evolution of precipitates in AlLiCu and AlLiCuSe alloys after age-hardening treatment, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 234 (1997) 253-257.

[771] K. Yoshimi, S. Hanada, M.H. Yoo, On lattice defects and strength anomaly of B2-type FeAl, INTERMETALLICS, 4 (1996) S159-S169.

[772] P. Wodniecki, M. Uhrmacher, M. Neubauer, K.P. Lieb, PAC studies of aluminium irradiated with inert gas ions, RADIATION EFFECTS AND DEFECTS IN SOLIDS, 139 (1996) 87-96.

[773] T.E.M. Staab, B. Somieski, R. KrauseRehberg, The data treatment influence on the spectra decomposition in positron lifetime spectroscopy .2. The effect of source corrections, NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 381 (1996) 141-151.

[774] H. Schittenhelm, G. Callies, P. Berger, H. Hugel, Investigations of extinction coefficients during excimer laser ablation and their interpretation in terms of Rayleigh scattering, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 29 (1996) 1564-1575.

[775] M.C. Sanchez, M.C. SanJose, A. Ballester, A.M. Vieitez, Requirements for in vitro rooting of Quercus robur and Q-rubra shoots derived from mature trees, TREE PHYSIOLOGY, 16 (1996) 673-680.

[776] J. Nenonen, J. Montonen, T. Katila, Thermal noise in biomagnetic measurements, REVIEW OF SCIENTIFIC INSTRUMENTS, 67 (1996) 2397-2405.

[777] K.L. Murty, K. Detemple, O. Kanert, G. Peters, J.T.M. DeHosson, In situ nuclear magnetic resonance study of defect dynamics during deformation of materials, JOURNAL OF MATERIALS SCIENCE, 31 (1996) 3289-3297.

[778] M. MunizMiranda, Surface enhanced Raman scattering of 4,4'-bipyridine adsorbed on smooth copper, silver and aluminium surfaces activated by deposited silver particles, JOURNAL OF RAMAN SPECTROSCOPY, 27 (1996) 435-437.

[779] C.Y. Lin, H.B. McShane, R.D. Rawlings, Extrusion process for manufacture of bulk functionally graded materials, POWDER METALLURGY, 39 (1996) 219-222.

[780] P.G. Koehler, C.A. Strong, R.S. Patterson, Control of German cockroach (Dictyoptera: Blattellidae) with residual toxicants in bait trays, JOURNAL OF ECONOMIC ENTOMOLOGY, 89 (1996) 1491-1496.

[781] M. Entezarian, R.A.L. Drew, Direct bonding of copper to aluminum nitride, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 212 (1996) 206-212.

[782] R. Catala, R. Gavara, Alternative high barrier polymers for food packaging, FOOD SCIENCE AND TECHNOLOGY INTERNATIONAL, 2 (1996) 281-291.

[783] T. Brusis, H. Luckhaupt, Ear drum perforation. On the history of paracentesis and grommets, LARYNGO-RHINO-OTOLOGIE, 75 (1996) 178-183.

[784] J.R. Blackford, R.A. Buckley, H. Jones, C.M. Sellars, Production of iron aluminides by co-rolling of elemental foils followed by heat treatment, SCRIPTA MATERIALIA, 34 (1996) 721-728.

[785] A. Biswas, G.K. Dey, A.J. Haq, D.K. Bose, S. Banerjee, A study of solid-state amorphization in Zr-30 at% Al by mechanical attrition, JOURNAL OF MATERIALS RESEARCH, 11 (1996) 599-607.

[786] M. Besterci, J. Ivan, Failure mechanism of dispersion strengthened Al-Al4C3 systems, JOURNAL OF MATERIALS SCIENCE LETTERS, 15 (1996) 2071-2074.

[787] V.V. Arslanov, I.V. Kalashnikova, Spontaneous recovery of the strength of polymer-aluminum adhesive systems in aqueous medium .1. Water transport and surface reactions, COLLOID JOURNAL, 58 (1996) 697-706.

[788] 1-TS=(aluminium* foil* or aluminum* foil* ) AND TS=(annealing or quenching or treatment* or treating)

10.1导入，检索3252，去重导入3248

 

TS=(aircusion furnace)

10.7.导入，检索724，去重导入723.