How to Update Autel MaxiVCI Mini VCI FIRMWARE
Note:
This procedure cuts across different makes of Autel scanners and applies to the MaxiVCI mini, MaxiVCI 100,
and the wireless diagnostic interface (for the MK908 for example). It
is essential in addition to routine Autel scanner updates, to have the
vehicle connector interface aka wireless Bluetooth VCI, updated to the
latest firmware to ensure optimal connectivity to vehicles. The MaxiVCI
mini is used by tools like MaxiCHECK MX808TS, MaxiCOM MK808TS and
MK808BT. Examples of Autel scanners that use the MaxiVCI 100 include the
MaxiSYS MS906BT, MaxiSYS MS906TS etc. The MaxiCOM MK908 uses the
wireless diagnostic interface aka Bluetooth diagnostic interface.
Important:
- 1.Ensure the device is well charged
- 2.Connectuion to VCI is firm
- 3.internet connection is stable
Procedure:
Step 1. Connect the VCI to the table via supplied USB
Into the USB port, these two green lights come on which means it works
USB connect indicators on the various models
Step 2. Connect the tablet to the internet via WIFI, then tab VCI Manager >> Update
During the update process:
- Do not leave this page during upgrade
- Do not disconnect the VCI
Current version is V2.03, reboot your VCI to completed update
Step3. Disconnect and then reconnect the USB to reboot the VCI
Update completed!
Source:http://blog.auteldiag.com/how-to-update-autel-vci-firmware/
