[root@u0704-t5-test-shaoew1 ~]$cat /etc/ssh/sshd_config
#Port 22 监听端口，默认监听22端口 【默认可修改】
#AddressFamily any IPV4和IPV6协议家族用哪个，any表示二者均有
#ListenAddress 0.0.0.0 指明监控的地址，0.0.0.0表示本机的所有地址 【默认可修改】
#ListenAddress :: 指明监听的IPV6的所有地址格式
# The default requires explicit activation of protocol 1
#Protocol 2 使用SSH第二版本，centos7默认第一版本已拒绝
# HostKey for protocol version 1 一版的SSH支持以下一种秘钥形式
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2 使用第二版本发送秘钥，支持以下四种秘钥认证的存放位置：（centos6只支持rsa和dsa两种）
HostKey /etc/ssh/ssh_host_rsa_key rsa私钥认证 【默认】
#HostKey /etc/ssh/ssh_host_dsa_key dsa私钥认证
HostKey /etc/ssh/ssh_host_ecdsa_key ecdsa私钥认证
HostKey /etc/ssh/ssh_host_ed25519_key ed25519私钥认证
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024 主机秘钥长度
# Ciphers and keying
#RekeyLimit default none
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV 当有人使用ssh登录系统的时候，SSH会记录信息，信息保存在/var/log/secure里面
#LogLevel INFO 日志的等级
# Authentication:
#LoginGraceTime 2m 登录的宽限时间，默认2分钟没有输入密码，则自动断开连接
#PermitRootLogin no
PermitRootLogin yes 是否允许管理员直接登录，'yes'表示允许
#StrictModes yes 是否让sshd去检查用户主目录或相关文件的权限数据
#MaxAuthTries 6 最大认证尝试次数，最多可以尝试6次输入密码。之后需要等待某段时间后才能再次输入密码
#MaxSessions 10 允许的最大会话数
#RSAAuthentication yes
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys 服务器生成一对公私钥之后，会将公钥放到.ssh/authorizd_keys里面，将私钥发给客户端
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes 是否允许支持基于口令的认证
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no 是否允许任何的密码认证
# Kerberos options 是否支持kerberos（基于第三方的认证，如LDAP）认证的方式，默认为no
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
#KerberosUseKuserok yes
# GSSAPI options
GSSAPIAuthentication yes
GSSAPICleanupCredentials no
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no
#GSSAPIEnablek5users no
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
# WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several
# problems.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes 是否允许x11转发，可以让窗口的数据通过SSH连接来传递(请查看ssh -X 参数)：#ssh -X user@IP
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes 是否反解DNS，如果想让客户端连接服务器端快一些，这个可以改为no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
AcceptEnv XMODIFIERS
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server 支持 SFTP ，如果注释掉，则不支持sftp连接
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# PermitTTY no
# ForceCommand cvs server
AllowUsers user1 user2 登录白名单（默认没有这个配置，需要自己手动添加），允许远程登录的用户。如果名单中没有的用户，则提示拒绝登录
