print address/symbol(%p*) in kernel
print address/symbol(%p*) in kernel
/*
* Show a '%p' thing. A kernel extension is that the '%p' is followed
* by an extra set of alphanumeric characters that are extended format
* specifiers.
*
* Please update scripts/checkpatch.pl when adding/removing conversion
* characters. (Search for "check for vsprintf extension").
*
* Right now we handle:
*
* - 'F' For symbolic function descriptor pointers with offset
* - 'f' For simple symbolic function names without offset
* - 'S' For symbolic direct pointers with offset
* - 's' For symbolic direct pointers without offset
* - '[FfSs]R' as above with __builtin_extract_return_addr() translation
* - 'B' For backtraced symbolic direct pointers with offset
* - 'R' For decoded struct resource, e.g., [mem 0x0-0x1f 64bit pref]
* - 'r' For raw struct resource, e.g., [mem 0x0-0x1f flags 0x201]
* - 'b[l]' For a bitmap, the number of bits is determined by the field
* width which must be explicitly specified either as part of the
* format string '%32b[l]' or through '%*b[l]', [l] selects
* range-list format instead of hex format
* - 'M' For a 6-byte MAC address, it prints the address in the
* usual colon-separated hex notation
* - 'm' For a 6-byte MAC address, it prints the hex address without colons
* - 'MF' For a 6-byte MAC FDDI address, it prints the address
* with a dash-separated hex notation
* - '[mM]R' For a 6-byte MAC address, Reverse order (Bluetooth)
* - 'I' [46] for IPv4/IPv6 addresses printed in the usual way
* IPv4 uses dot-separated decimal without leading 0's (1.2.3.4)
* IPv6 uses colon separated network-order 16 bit hex with leading 0's
* [S][pfs]
* Generic IPv4/IPv6 address (struct sockaddr *) that falls back to
* [4] or [6] and is able to print port [p], flowinfo [f], scope [s]
* - 'i' [46] for 'raw' IPv4/IPv6 addresses
* IPv6 omits the colons (01020304...0f)
* IPv4 uses dot-separated decimal with leading 0's (010.123.045.006)
* [S][pfs]
* Generic IPv4/IPv6 address (struct sockaddr *) that falls back to
* [4] or [6] and is able to print port [p], flowinfo [f], scope [s]
* - '[Ii][4S][hnbl]' IPv4 addresses in host, network, big or little endian order
* - 'I[6S]c' for IPv6 addresses printed as specified by
* http://tools.ietf.org/html/rfc5952
* - 'E[achnops]' For an escaped buffer, where rules are defined by combination
* of the following flags (see string_escape_mem() for the
* details):
* a - ESCAPE_ANY
* c - ESCAPE_SPECIAL
* h - ESCAPE_HEX
* n - ESCAPE_NULL
* o - ESCAPE_OCTAL
* p - ESCAPE_NP
* s - ESCAPE_SPACE
* By default ESCAPE_ANY_NP is used.
* - 'U' For a 16 byte UUID/GUID, it prints the UUID/GUID in the form
* "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
* Options for %pU are:
* b big endian lower case hex (default)
* B big endian UPPER case hex
* l little endian lower case hex
* L little endian UPPER case hex
* big endian output byte order is:
* [0][1][2][3]-[4][5]-[6][7]-[8][9]-[10][11][12][13][14][15]
* little endian output byte order is:
* [3][2][1][0]-[5][4]-[7][6]-[8][9]-[10][11][12][13][14][15]
* - 'V' For a struct va_format which contains a format string * and va_list *,
* call vsnprintf(->format, *->va_list).
* Implements a "recursive vsnprintf".
* Do not use this feature without some mechanism to verify the
* correctness of the format string and va_list arguments.
* - 'K' For a kernel pointer that should be hidden from unprivileged users
* - 'NF' For a netdev_features_t
* - 'h[CDN]' For a variable-length buffer, it prints it as a hex string with
* a certain separator (' ' by default):
* C colon
* D dash
* N no separator
* The maximum supported length is 64 bytes of the input. Consider
* to use print_hex_dump() for the larger input.
* - 'a[pd]' For address types [p] phys_addr_t, [d] dma_addr_t and derivatives
* (default assumed to be phys_addr_t, passed by reference)
* - 'd[234]' For a dentry name (optionally 2-4 last components)
* - 'D[234]' Same as 'd' but for a struct file
* - 'g' For block_device name (gendisk + partition number)
* - 'C' For a clock, it prints the name (Common Clock Framework) or address
* (legacy clock framework) of the clock
* - 'Cn' For a clock, it prints the name (Common Clock Framework) or address
* (legacy clock framework) of the clock
* - 'Cr' For a clock, it prints the current rate of the clock
* - 'G' For flags to be printed as a collection of symbolic strings that would
* construct the specific value. Supported flags given by option:
* p page flags (see struct page) given as pointer to unsigned long
* g gfp flags (GFP_* and __GFP_*) given as pointer to gfp_t
* v vma flags (VM_*) given as pointer to unsigned long
* - 'O' For a kobject based struct. Must be one of the following:
* - 'OF[fnpPcCF]' For a device tree object
* Without any optional arguments prints the full_name
* f device node full_name
* n device node name
* p device node phandle
* P device node path spec (name + @unit)
* F device node flags
* c major compatible string
* C full compatible string
*
* - 'x' For printing the address. Equivalent to "%lx".
*
* ** Please update also Documentation/printk-formats.txt when making changes **
*
* Note: The difference between 'S' and 'F' is that on ia64 and ppc64
* function pointers are really function descriptors, which contain a
* pointer to the real address.
*
* Note: The default behaviour (unadorned %p) is to hash the address,
* rendering it useful as a unique identifier.
*/
kernel 5.4版本打印一个symbol需要使用%pS,用%pF看起来不行
分类:
Linux misc
【推荐】编程新体验,更懂你的AI,立即体验豆包MarsCode编程助手
【推荐】凌霞软件回馈社区,博客园 & 1Panel & Halo 联合会员上线
【推荐】抖音旗下AI助手豆包,你的智能百科全书,全免费不限次数
【推荐】博客园社区专享云产品让利特惠,阿里云新客6.5折上折
【推荐】轻量又高性能的 SSH 工具 IShell:AI 加持,快人一步
· 浏览器原生「磁吸」效果!Anchor Positioning 锚点定位神器解析
· 没有源码,如何修改代码逻辑?
· 一个奇形怪状的面试题:Bean中的CHM要不要加volatile?
· [.NET]调用本地 Deepseek 模型
· 一个费力不讨好的项目,让我损失了近一半的绩效!
· 在鹅厂做java开发是什么体验
· 百万级群聊的设计实践
· WPF到Web的无缝过渡:英雄联盟客户端的OpenSilver迁移实战
· 永远不要相信用户的输入:从 SQL 注入攻防看输入验证的重要性
· 浏览器原生「磁吸」效果!Anchor Positioning 锚点定位神器解析
2018-10-03 5G与物联网