ASIC设计流程(ASIC design flow)
|
1. Architectural and electrical specification. 2. RTL(Register Transfer Level) coding in HDL(Hardware Description Language). 3. DFT(Design For Test) memory BIST(Built In Self Test) insertion, for designs containing memory elements. 4. Exhaustive dynamic simulation of the design, in order to verify the functionality of the design. 5. Design environment setting. This includes the technology library to be used, along with other environmental attributes. 6. Constraining and synthesizing the design with scan insertion (and optional JTAG) using Design Compiler. 7. Block level static timing analysis, using Design Compiler’s built-in static timing analysis engine. 8. Formal verification of the design. RTL compared against the synthesized netlist, using Formality. 9. Pre-layout static timing analysis on the full design through PrimeTime. 10. Forward annotation of timing constraints to the layout tool. 11. Initial floorplanning with timing driven placement of cells, clock tree insertion and global routing 12. Transfer of clock tree to the original design (netlist) residing in Design Compiler. 13. In-place optimization of the design in Design Compiler. 14. Formal verification between the synthesized netlist and clock tree inserted netlist, using Formality. 15. Extraction of estimated timing delays from the layout after the global routing step (step 11). 16. Back annotation of estimated timing data from the global routed design, to PrimeTime. 17. Static timing analysis in PrimeTime, using the estimated delays extracted after performing global route. 18. Detailed routing of the design. 19. Extraction of real timing delays from the detailed routed design. 20. Back annotation of the real extracted timing data to PrimeTime. 21. Post-layout static timing analysis using PrimeTime. 22. Functional gate-level simulation of the design with post-layout timing (if desired). 23. Tape out after LVS(Layout Versus Schematic) and DRC(Design Rule Checking) verification.
|
