目标检测模型的评价标准-AP与mAP
目录
前言
为了了解模型的泛化能力,即判断模型的好坏,我们需要用某个指标来衡量,有了评价指标,就可以对比不同模型的优劣,并通过这个指标来进一步调参优化模型。对于分类和回归两类监督模型,分别有各自的评判标准。
不同的问题和不同的数据集都会有不同的模型评价指标,比如分类问题,数据集类别平衡的情况下可以使用准确率作为评价指标,但是现实中的数据集几乎都是类别不平衡的,所以一般都是采用 AP
作为分类的评价指标,分别计算每个类别的 AP
,再计算mAP
。
一,精确率、召回率与F1
1.1,准确率
准确率(精度) – Accuracy,预测正确的结果占总样本的百分比,定义如下:
错误率和精度虽然常用,但是并不能满足所有任务需求。以西瓜问题为例,假设瓜农拉来一车西瓜,我们用训练好的模型对西瓜进行判别,现如精度只能衡量有多少比例的西瓜被我们判断类别正确(两类:好瓜、坏瓜)。但是若我们更加关心的是“挑出的西瓜中有多少比例是好瓜”,或者”所有好瓜中有多少比例被挑出来“,那么精度和错误率这个指标显然是不够用的。
虽然准确率可以判断总的正确率,但是在样本不平衡的情况下,并不能作为很好的指标来衡量结果。举个简单的例子,比如在一个总样本中,正样本占 90%,负样本占 10%,样本是严重不平衡的。对于这种情况,我们只需要将全部样本预测为正样本即可得到 90% 的高准确率,但实际上我们并没有很用心的分类,只是随便无脑一分而已。这就说明了:由于样本不平衡的问题,导致了得到的高准确率结果含有很大的水分。即如果样本不平衡,准确率就会失效。
1.2,精确率、召回率
精确率(查准率)P
、召回率(查全率)R
的计算涉及到混淆矩阵的定义,混淆矩阵表格如下:
名称 | 定义 |
---|---|
True Positive (真正例, TP ) |
将正类预测为正类数 |
True Negative (真负例, TN ) |
将负类预测为负类数 |
False Positive (假正例, FP ) |
将负类预测为正类数 → 误报 (Type I error) |
False Negative (假负例子, FN ) |
将正类预测为负类数 → 漏报 (Type II error) |
查准率与查全率计算公式:
- 查准率(精确率)
- 查全率(召回率)
精准率和准确率看上去有些类似,但是完全不同的两个概念。精准率代表对正样本结果中的预测准确程度,而准确率则代表整体的预测准确程度,既包括正样本,也包括负样本。
精确率描述了模型有多准,即在预测为正例的结果中,有多少是真正例;召回率则描述了模型有多全,即在为真的样本中,有多少被我们的模型预测为正例。精确率和召回率的区别在于分母不同,一个分母是预测为正的样本数,另一个是原来样本中所有的正样本数。
1.3,F1 分数
如果想要找到
这里的
计算是针对二分类模型,多分类任务的 的计算请看下面。
其中
不同的计算机视觉问题,对两类错误有不同的偏好,常常在某一类错误不多于一定阈值的情况下,努力减少另一类错误。在目标检测中,mAP(mean Average Precision)作为一个统一的指标将这两种错误兼顾考虑。
很多时候我们会有多个混淆矩阵,例如进行多次训练/测试,每次都能得到一个混淆矩阵;或者是在多个数据集上进行训练/测试,希望估计算法的”全局“性能;又或者是执行多分类任务,每两两类别的组合都对应一个混淆矩阵;....总而来说,我们希望能在
一种直接的做法是先在各混淆矩阵上分别计算出查准率和查全率,记为 Macro-P
)“、”宏查准率(Macro-R
)“及对应的”宏 Macro-F1
)“:
另一种做法是将各混淆矩阵对应元素进行平均,得到 Micro-P
)、”微查全率“(Micro-R
)和”微 Mairo-F1
)
1.4,PR 曲线
精准率和召回率的关系可以用一个 P-R
图来展示,以查准率 P
为纵轴、查全率 R
为横轴作图,就得到了查准率-查全率曲线,简称 P-R 曲线,PR
曲线下的面积定义为 AP
:
1.4.1,如何理解 P-R 曲线
可以从排序型模型或者分类模型理解。以逻辑回归举例,逻辑回归的输出是一个 0
到 1
之间的概率数字,因此,如果我们想要根据这个概率判断用户好坏的话,我们就必须定义一个阈值 。通常来讲,逻辑回归的概率越大说明越接近 1
,也就可以说他是坏用户的可能性更大。比如,我们定义了阈值为 0.5
,即概率小于 0.5
的我们都认为是好用户,而大于 0.5
都认为是坏用户。因此,对于阈值为 0.5
的情况下,我们可以得到相应的一对查准率和查全率。
但问题是:这个阈值是我们随便定义的,我们并不知道这个阈值是否符合我们的要求。 因此,为了找到一个最合适的阈值满足我们的要求,我们就必须遍历 0
到 1
之间所有的阈值,而每个阈值下都对应着一对查准率和查全率,从而我们就得到了 PR
曲线。
最后如何找到最好的阈值点呢? 首先,需要说明的是我们对于这两个指标的要求:我们希望查准率和查全率同时都非常高。 但实际上这两个指标是一对矛盾体,无法做到双高。图中明显看到,如果其中一个非常高,另一个肯定会非常低。选取合适的阈值点要根据实际需求,比如我们想要高的查全率,那么我们就会牺牲一些查准率,在保证查全率最高的情况下,查准率也不那么低。。
1.5,ROC 曲线与 AUC 面积
PR
曲线是以Recall
为横轴,Precision
为纵轴;而ROC
曲线则是以FPR
为横轴,TPR
为纵轴。P-R 曲线越靠近右上角性能越好**。PR
曲线的两个指标都聚焦于正例PR
曲线展示的是Precision vs Recall
的曲线,ROC
曲线展示的是FPR
(x 轴:False positive rate) vsTPR
(True positive rate, TPR)曲线。
二,AP 与 mAP
2.1,AP 与 mAP 指标理解
AP
衡量的是训练好的模型在每个类别上的好坏,mAP
衡量的是模型在所有类别上的好坏,得到 AP
后 mAP
的计算就变得很简单了,就是取所有 AP
的平均值。AP
的计算公式比较复杂(所以单独作一章节内容),详细内容参考下文。
mAP
这个术语有不同的定义。此度量指标通常用于信息检索、图像分类和目标检测领域。然而这两个领域计算 mAP
的方式却不相同。这里我们只谈论目标检测中的 mAP
计算方法。
mAP
常作为目标检测算法的评价指标,具体来说就是,对于每张图片检测模型会输出多个预测框(远超真实框的个数),我们使用 IoU
(Intersection Over Union,交并比)来标记预测框是否预测准确。标记完成后,随着预测框的增多,查全率 R
总会上升,在不同查全率 R
水平下对准确率 P
做平均,即得到 AP,最后再对所有类别按其所占比例做平均,即得到 mAP
指标。
2.2,近似计算AP
知道了AP
的定义,下一步就是理解AP
计算的实现,理论上可以通过积分来计算AP
,公式如下:
但通常情况下都是使用近似或者插值的方法来计算
- 近似计算
(approximated average precision
),这种计算方式是approximated
形式的; - 很显然位于一条竖直线上的点对计算
没有贡献; - 这里
为数据总量, 为每个样本点的索引, 。
近似计算 AP
和绘制 PR
曲线代码如下:
import numpy as np import matplotlib.pyplot as plt class_names = ["car", "pedestrians", "bicycle"] def draw_PR_curve(predict_scores, eval_labels, name, cls_idx=1): """calculate AP and draw PR curve, there are 3 types Parameters: @all_scores: single test dataset predict scores array, (-1, 3) @all_labels: single test dataset predict label array, (-1, 3) @cls_idx: the serial number of the AP to be calculated, example: 0,1,2,3... """ # print('sklearn Macro-F1-Score:', f1_score(predict_scores, eval_labels, average='macro')) global class_names fig, ax = plt.subplots(nrows=1, ncols=1, figsize=(15, 10)) # Rank the predicted scores from large to small, extract their corresponding index(index number), and generate an array idx = predict_scores[:, cls_idx].argsort()[::-1] eval_labels_descend = eval_labels[idx] pos_gt_num = np.sum(eval_labels == cls_idx) # number of all gt predict_results = np.ones_like(eval_labels) tp_arr = np.logical_and(predict_results == cls_idx, eval_labels_descend == cls_idx) # ndarray fp_arr = np.logical_and(predict_results == cls_idx, eval_labels_descend != cls_idx) tp_cum = np.cumsum(tp_arr).astype(float) # ndarray, Cumulative sum of array elements. fp_cum = np.cumsum(fp_arr).astype(float) precision_arr = tp_cum / (tp_cum + fp_cum) # ndarray recall_arr = tp_cum / pos_gt_num ap = 0.0 prev_recall = 0 for p, r in zip(precision_arr, recall_arr): ap += p * (r - prev_recall) # pdb.set_trace() prev_recall = r print("------%s, ap: %f-----" % (name, ap)) fig_label = '[%s, %s] ap=%f' % (name, class_names[cls_idx], ap) ax.plot(recall_arr, precision_arr, label=fig_label) ax.legend(loc="lower left") ax.set_title("PR curve about class: %s" % (class_names[cls_idx])) ax.set(xticks=np.arange(0., 1, 0.05), yticks=np.arange(0., 1, 0.05)) ax.set(xlabel="recall", ylabel="precision", xlim=[0, 1], ylim=[0, 1]) fig.savefig("./pr-curve-%s.png" % class_names[cls_idx]) plt.close(fig)
2.3,插值计算 AP
插值计算(Interpolated average precision
) 11
点插值计算方式计算
- 这是通常意义上的
11
points_Interpolated
形式的AP
,选取固定的11
个阈值,这个在 PASCAL2007 中使用 - 这里因为参与计算的只有
11
个点,所以 ,称为 11 points_Interpolated, 为阈值索引 取第 个阈值所对应的样本点之后的样本中的最大值,只不过这里的阈值被限定在了 范围内。
从曲线上看,真实 AP< approximated AP < Interpolated AP
,11-points Interpolated AP
可能大也可能小,当数据量很多的时候会接近于 Interpolated AP
,与 Interpolated AP
不同,前面的公式中计算 AP
时都是对 PR
曲线的面积估计,PASCAL 的论文里给出的公式就更加简单粗暴了,直接计算11
个阈值处的 precision
的平均值。PASCAL
论文给出的 11
点计算 AP
的公式如下。
1, 在给定 recal
和 precision
的条件下计算 AP
:
def voc_ap(rec, prec, use_07_metric=False): """ ap = voc_ap(rec, prec, [use_07_metric]) Compute VOC AP given precision and recall. If use_07_metric is true, uses the VOC 07 11 point method (default:False). """ if use_07_metric: # 11 point metric ap = 0. for t in np.arange(0., 1.1, 0.1): if np.sum(rec >= t) == 0: p = 0 else: p = np.max(prec[rec >= t]) ap = ap + p / 11. else: # correct AP calculation # first append sentinel values at the end mrec = np.concatenate(([0.], rec, [1.])) mpre = np.concatenate(([0.], prec, [0.])) # compute the precision envelope for i in range(mpre.size - 1, 0, -1): mpre[i - 1] = np.maximum(mpre[i - 1], mpre[i]) # to calculate area under PR curve, look for points # where X axis (recall) changes value i = np.where(mrec[1:] != mrec[:-1])[0] # and sum (\Delta recall) * prec ap = np.sum((mrec[i + 1] - mrec[i]) * mpre[i + 1]) return ap
2,给定目标检测结果文件和测试集标签文件 xml
等计算 AP
:
def parse_rec(filename): """ Parse a PASCAL VOC xml file Return : list, element is dict. """ tree = ET.parse(filename) objects = [] for obj in tree.findall('object'): obj_struct = {} obj_struct['name'] = obj.find('name').text obj_struct['pose'] = obj.find('pose').text obj_struct['truncated'] = int(obj.find('truncated').text) obj_struct['difficult'] = int(obj.find('difficult').text) bbox = obj.find('bndbox') obj_struct['bbox'] = [int(bbox.find('xmin').text), int(bbox.find('ymin').text), int(bbox.find('xmax').text), int(bbox.find('ymax').text)] objects.append(obj_struct) return objects def voc_eval(detpath, annopath, imagesetfile, classname, cachedir, ovthresh=0.5, use_07_metric=False): """rec, prec, ap = voc_eval(detpath, annopath, imagesetfile, classname, [ovthresh], [use_07_metric]) Top level function that does the PASCAL VOC evaluation. detpath: Path to detections result file detpath.format(classname) should produce the detection results file. annopath: Path to annotations file annopath.format(imagename) should be the xml annotations file. imagesetfile: Text file containing the list of images, one image per line. classname: Category name (duh) cachedir: Directory for caching the annotations [ovthresh]: Overlap threshold (default = 0.5) [use_07_metric]: Whether to use VOC07's 11 point AP computation (default False) """ # assumes detections are in detpath.format(classname) # assumes annotations are in annopath.format(imagename) # assumes imagesetfile is a text file with each line an image name # cachedir caches the annotations in a pickle file # first load gt if not os.path.isdir(cachedir): os.mkdir(cachedir) cachefile = os.path.join(cachedir, '%s_annots.pkl' % imagesetfile) # read list of images with open(imagesetfile, 'r') as f: lines = f.readlines() imagenames = [x.strip() for x in lines] if not os.path.isfile(cachefile): # load annotations recs = {} for i, imagename in enumerate(imagenames): recs[imagename] = parse_rec(annopath.format(imagename)) if i % 100 == 0: print('Reading annotation for {:d}/{:d}'.format( i + 1, len(imagenames))) # save print('Saving cached annotations to {:s}'.format(cachefile)) with open(cachefile, 'wb') as f: pickle.dump(recs, f) else: # load with open(cachefile, 'rb') as f: try: recs = pickle.load(f) except: recs = pickle.load(f, encoding='bytes') # extract gt objects for this class class_recs = {} npos = 0 for imagename in imagenames: R = [obj for obj in recs[imagename] if obj['name'] == classname] bbox = np.array([x['bbox'] for x in R]) difficult = np.array([x['difficult'] for x in R]).astype(np.bool) det = [False] * len(R) npos = npos + sum(~difficult) class_recs[imagename] = {'bbox': bbox, 'difficult': difficult, 'det': det} # read dets detfile = detpath.format(classname) with open(detfile, 'r') as f: lines = f.readlines() splitlines = [x.strip().split(' ') for x in lines] image_ids = [x[0] for x in splitlines] confidence = np.array([float(x[1]) for x in splitlines]) BB = np.array([[float(z) for z in x[2:]] for x in splitlines]) nd = len(image_ids) tp = np.zeros(nd) fp = np.zeros(nd) if BB.shape[0] > 0: # sort by confidence sorted_ind = np.argsort(-confidence) sorted_scores = np.sort(-confidence) BB = BB[sorted_ind, :] image_ids = [image_ids[x] for x in sorted_ind] # go down dets and mark TPs and FPs for d in range(nd): R = class_recs[image_ids[d]] bb = BB[d, :].astype(float) ovmax = -np.inf BBGT = R['bbox'].astype(float) if BBGT.size > 0: # compute overlaps # intersection ixmin = np.maximum(BBGT[:, 0], bb[0]) iymin = np.maximum(BBGT[:, 1], bb[1]) ixmax = np.minimum(BBGT[:, 2], bb[2]) iymax = np.minimum(BBGT[:, 3], bb[3]) iw = np.maximum(ixmax - ixmin + 1., 0.) ih = np.maximum(iymax - iymin + 1., 0.) inters = iw * ih # union uni = ((bb[2] - bb[0] + 1.) * (bb[3] - bb[1] + 1.) + (BBGT[:, 2] - BBGT[:, 0] + 1.) * (BBGT[:, 3] - BBGT[:, 1] + 1.) - inters) overlaps = inters / uni ovmax = np.max(overlaps) jmax = np.argmax(overlaps) if ovmax > ovthresh: if not R['difficult'][jmax]: if not R['det'][jmax]: tp[d] = 1. R['det'][jmax] = 1 else: fp[d] = 1. else: fp[d] = 1. # compute precision recall fp = np.cumsum(fp) tp = np.cumsum(tp) rec = tp / float(npos) # avoid divide by zero in case the first detection matches a difficult # ground truth prec = tp / np.maximum(tp + fp, np.finfo(np.float64).eps) ap = voc_ap(rec, prec, use_07_metric) return rec, prec, ap
2.4,mAP 计算方法
因为
(1)在 VOC2007
,只需要选取当 11
个点时的 Precision
最大值,然后 11
个 Precision
的平均值,VOC
数据集中计算
(2)在 VOC2010
及以后,需要针对每一个不同的 Recall
值(包括 0 和 1),选取其大于等于这些 Recall
值时的 Precision
最大值,然后计算 PR
曲线下面积作为
(3)COCO
数据集,设定多个 IOU
阈值(0.5-0.95
, 0.05
为步长),在每一个 IOU
阈值下都有某一类别的 AP
值,然后求不同 IOU
阈值下的 AP
平均,就是所求的最终的某类别的 AP
值。
三,目标检测度量标准汇总
评价指标 | 定义及理解 |
---|---|
mAP |
mean Average Precision, 即各类别 AP 的平均值 |
AP |
PR 曲线下面积,后文会详细讲解 |
PR 曲线 |
Precision-Recall 曲线 |
Precision |
|
Recall |
|
TP |
IoU>0.5 的检测框数量(同一 Ground Truth 只计算一次,阈值取 0.5 ) |
FP |
IoU<=0.5 的检测框,或者是检测到同一个 GT 的多余检测框的数量 |
FN |
没有检测到的 GT 的数量 |
四,参考资料
版权声明 ©
本文作者:嵌入式视觉
本文链接:https://www.cnblogs.com/armcvai/p/16943208.html
版权声明:本文为「嵌入式视觉」的原创文章,首发于 github ,遵循 CC BY-NC-ND 4.0 版权协议,著作权归作者所有,转载请注明出处!
鼓励博主:如果您觉得文章对您有所帮助,可以点击文章右下角【推荐】一下。您的鼓励就是博主最大的动力!
【推荐】编程新体验,更懂你的AI,立即体验豆包MarsCode编程助手
【推荐】凌霞软件回馈社区,博客园 & 1Panel & Halo 联合会员上线
【推荐】抖音旗下AI助手豆包,你的智能百科全书,全免费不限次数
【推荐】博客园社区专享云产品让利特惠,阿里云新客6.5折上折
【推荐】轻量又高性能的 SSH 工具 IShell:AI 加持,快人一步
· PowerShell开发游戏 · 打蜜蜂
· 在鹅厂做java开发是什么体验
· 百万级群聊的设计实践
· WPF到Web的无缝过渡:英雄联盟客户端的OpenSilver迁移实战
· 永远不要相信用户的输入:从 SQL 注入攻防看输入验证的重要性