openwrt14.07 howto generate /etc/config/network
openwrt14.07 howto generate /etc/config/network
Table of Contents
1 firstboot test in board
1.1 firstboot operation
root@OpenWrt:~# firstboot root@OpenWrt:~# ls /etc/uci-defaults/ 01_leds 09_fix-trx-header 02_network 10_migrate-shadow 03_network-switchX-migration 11_migrate-sysctl 03_network-vlan-migration 12_network-generate-ula 04_led_migration 30_uboot-envtools 09_fix-seama-header root@OpenWrt:~# ls /etc/config/ auth_local dropbear igmp system autossh firewall lbd wifidog captive_portal horst php5-fastcgi wireless
after firstboot & before reboot
- there are files in /etc/uci-defaults
- there is no network in /etc/config
1.2 reboot operation
root@OpenWrt:~# reboot root@OpenWrt:~# ls /etc/config/ auth_local dropbear igmp php5-fastcgi wifidog autossh firewall lbd system wireless captive_portal horst network ubootenv root@OpenWrt:~# ls /etc/uci-defaults/ root@OpenWrt:~#
after firstboot & reboot
- network generated in /etc/config
- files in /etc/uci-defaults are removed
2 analysis
2.1 invoke sequences
- /sbin/init -> procd -> "sysinit" -> /etc/rc.d/xxx
- /etc/rc.d/S10boot -> /etc/init.d/boot
- /etc/init.d/boot -> uci_apply_defaults
- uci_apply_defaults -> /etc/uci-defaults/02_network
2.2 /etc/init.d/boot -> uci_apply_defaults
Focus on the boot script which is located in package/base-files/files/etc/init.d/boot
uci_apply_defaults() {
. /lib/functions/system.sh
cd /etc/uci-defaults || return 0
files="$(ls)"
[ -z "$files" ] && return 0
mkdir -p /tmp/.uci
for file in $files; do
( . "./$(basename $file)" ) && rm -f "$file"
done
uci commit
}
boot() {
...
uci_apply_defaults
...
}
Once openwrt starts, /etc/init.d/boot will boot, and invoke uci_apply_defaults.
The files in etc/uci-defaults will be executed only once. That's why when we invoke firstboot, there are files in /etc/uci-defaults, and after reboot there are nothing left.
2.3 /etc/uci-defaults/02_network
SDK: 02_network located in target/linux/ar71xx/base-files/etc/uci-defaults/02_network
board: 02_network located in /etc/uci-defaults
After 'firstboot', this file exist in /etc/uci-defaults, and disappear after reboot.
#!/bin/sh # # Copyright (C) 2011 OpenWrt.org # [ -e /etc/config/network ] && exit 0 touch /etc/config/network . /lib/functions/uci-defaults.sh . /lib/ar71xx.sh ucidef_set_interface_loopback board=$(ar71xx_board_name) ... uci commit network exit 0
From this script, /etc/config/network created and filled by /lib/functions/uci-defaults.sh
2.4 uci-defaults.sh
file locattion:
in board: /lib/functions/uci-defaults.sh
in SDK: package/base-files/files/lib/functions/uci-defaults.sh
#!/bin/sh
# Copyright (C) 2011 OpenWrt.org
UCIDEF_LEDS_CHANGED=0
ucidef_set_led_netdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='netdev'
set system.$cfg.dev='$dev'
set system.$cfg.mode='link tx rx'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_usbdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='usbdev'
set system.$cfg.dev='$dev'
set system.$cfg.interval='50'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_wlan() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_switch() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
local port_mask=$5
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
set system.$cfg.port_mask='$port_mask'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_default() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local default=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.default='$default'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_rssi() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local iface=$4
local minq=$5
local maxq=$6
local offset=$7
local factor=$8
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='rssi'
set system.$cfg.iface='rssid_$iface'
set system.$cfg.minq='$minq'
set system.$cfg.maxq='$maxq'
set system.$cfg.offset='$offset'
set system.$cfg.factor='$factor'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_rssimon() {
local dev="$1"
local refresh="$2"
local threshold="$3"
local cfg="rssid_$dev"
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='rssid'
set system.$cfg.dev='$dev'
set system.$cfg.refresh='$refresh'
set system.$cfg.threshold='$threshold'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_commit_leds()
{
[ "$UCIDEF_LEDS_CHANGED" == "1" ] && uci commit system
}
ucidef_set_interface_loopback() {
uci batch <<EOF
set network.loopback='interface'
set network.loopback.ifname='lo'
set network.loopback.proto='static'
set network.loopback.ipaddr='127.0.0.1'
set network.loopback.netmask='255.0.0.0'
set network.globals='globals'
set network.globals.ula_prefix='auto'
EOF
}
ucidef_set_interface_raw() {
local cfg=$1
local ifname=$2
uci batch <<EOF
set network.$cfg='interface'
set network.$cfg.ifname='$ifname'
set network.$cfg.proto='none'
EOF
}
ucidef_set_interface_lan() {
local ifname=$1
uci batch <<EOF
set network.lan='interface'
set network.lan.ifname='$ifname'
set network.lan.force_link=1
set network.lan.type='bridge'
set network.lan.proto='static'
set network.lan.ipaddr='192.168.1.1'
set network.lan.netmask='255.255.255.0'
set network.lan.ip6assign='60'
EOF
}
ucidef_set_interface_wan() {
local ifname=$1
uci batch <<EOF
set network.wan='interface'
set network.wan.ifname='$ifname'
set network.wan.proto='dhcp'
set network.wan6='interface'
set network.wan6.ifname='@wan'
set network.wan6.proto='dhcpv6'
EOF
}
ucidef_set_interfaces_lan_wan() {
local lan_ifname=$1
local wan_ifname=$2
ucidef_set_interface_lan "$lan_ifname"
ucidef_set_interface_wan "$wan_ifname"
}
ucidef_set_interface_macaddr() {
local ifname=$1
local mac=$2
uci batch <<EOF
set network.$ifname.macaddr='$mac'
EOF
}
ucidef_add_switch() {
local name=$1
local reset=$2
local enable=$3
uci batch <<EOF
add network switch
set network.@switch[-1].name='$name'
set network.@switch[-1].reset='$reset'
set network.@switch[-1].enable_vlan='$enable'
EOF
}
ucidef_add_switch_vlan() {
local device=$1
local vlan=$2
local ports=$3
uci batch <<EOF
add network switch_vlan
set network.@switch_vlan[-1].device='$device'
set network.@switch_vlan[-1].vlan='$vlan'
set network.@switch_vlan[-1].ports='$ports'
EOF
}
ucidef_add_switch_port() {
local device=$1
local port=$2
uci batch <<EOF
add network switch_port
set network.@switch_port[-1].device='$device'
set network.@switch_port[-1].port='$port'
EOF
}
