minikube配置网络为calico BGP模式

序言

原本没有想写这么一篇文章，因为每次下班回家晚上都会学习会，家里机器条件没那么好，搞三台到四台虚拟机出来做K8S测试还是比较困难的，所以这里就用了minikube来进行搭建。
想利用minikube搭建kubernetes 1.27.2，但是受网络影响，只能安装到kubernetes 1.26.3，所有的安装内容基本上与现实机器安装kubernetes一致，这里也是采用calico + purelb来实现BGP和loadbance模式的。宿主机上使用frr软件实现开启BGP功能
准备在接下来的日子里面，好好研究k8s，同时把关注点放在在网络隔离，代码安全，镜像安全方面
minikube中启用BGP功能这个应该算是国内的第一篇文档吧

1.基础环境

1.1 硬件基础信息

CPU	内存	存储	备注
4 vcpu	12G RAM	160GB	VM中开启嵌套虚拟化

1.2 软件基础信息

主机名	OS	IP	容器
minikube.sec.com	AlmaLinux release 9.2	10.20.28.170	docker 24.0.2

1.3 minikube版本信息

Minikube版本	Kubernetes版本	CNI	备注
minikube v1.30.1	kubernetes v1.26.3	calico v3.26.0

2.基础配置

2.1 基础配置

# 优化SSH链接
sed -i 's/^#UseDNS no/UseDNS no/g' /etc/ssh/sshd_config
sed -i 's/^GSSAPIAuthentication no/GSSAPIAuthentication no/g' /etc/ssh/sshd_config

# 关闭防火墙
systemctl stop firewalld
systemctl disable firewalld

# 关闭selinux
setenforce 0
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config

# 网络相关的配置
/etc/NetworkManager/system-connections/ens192.nmconnection

# 安装一些常用工具
dnf install wget curl net-tools vim -y

2.2 安装docker

# 设置docker软件安装源
wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo

# docker 安装
dnf install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin -y

# 设置docker镜像加速源
cat <<EOF >/etc/docker/daemon.json
{
  "registry-mirrors": [
	  "https://docker.nju.edu.cn/"
  ]
}
EOF

# 启动docker和设置docker开机自启动
systemctl enable docker
systemctl start docker

3.minikube部署

3.1 部署minikube

[minikube start | minikube (k8s.io)](minikube start | minikube (k8s.io))

# 下载minikube软件
curl -LO https://storage.googleapis.com/minikube/releases/latest/minikube-linux-amd64

# 指定下载特定版本
curl -LO https://storage.googleapis.com/minikube/releases/v1.30.1/minikube-linux-amd64

# 安装minikube
sudo install minikube-linux-amd64 /usr/local/bin/minikube

3.2 部署kubernetes

查看可部署的kubernetes版本

$ minikube config defaults kubernetes-version
* v1.27.0-rc.0
……………省略…………………
* v1.16.13

minikube start \
--nodes 3 \
--driver=docker \
--network-plugin=cni \
--extra-config=kubeadm.pod-network-cidr=192.168.0.0/16 \
--service-cluster-ip-range=10.96.0.0/16 \
--kubernetes-version=v1.26.3 \
--base-image=docker.io/kicbase/stable:v0.0.39 \
--registry-mirror=https://docker.nju.edu.cn \
--cpus=2 \
--memory=4096mb \
--container-runtime=containerd

可用词解释

--nodes 3 设置节点为3个
--driver=docker 设置驱动类型为docker
--network-plugin=cni 设置cni为calico
--extra-config=kubeadm.pod-network-cidr=192.168.0.0/16 设置podIP
--service-cluster-ip-range=10.96.0.0/16 设置cluster ip
--kubernetes-version=v1.26.3 设置kubernetes版本
--registry-mirror=https://docker.nju.edu.cn 设置生成的容器内的docker镜像源
--base-image=docker.io/kicbase/stable:v0.0.39 指定base image
--image-mirror-country=cn 设置kubernetes源为阿里，本次实验阿里源有问题，故不设置
--cpus=2 设置每个虚拟节点为2vcpu
--memory=4096mb 设置每个虚拟节点为4G
--container-runtime=containerd 设置containerd为运行环境

给node打标签

# 原有状态
$ kubectl get nodes
NAME           STATUS   ROLES           AGE     VERSION
minikube       Ready    control-plane   12m     v1.26.3
minikube-m02   Ready    <none>          10m     v1.26.3
minikube-m03   Ready    <none>          9m45s   v1.26.3

# 打标签
kubectl label node minikube kubernetes.io/role=master
kubectl label node minikube-m02 kubernetes.io/role=worker
kubectl label node minikube-m03 kubernetes.io/role=worker

# 新标签状态
$ kubectl get nodes
NAME           STATUS   ROLES                  AGE   VERSION
minikube       Ready    control-plane,master   14m   v1.26.3
minikube-m02   Ready    worker                 12m   v1.26.3
minikube-m03   Ready    worker                 11m   v1.26.3

# 查看机器状态
$ kubectl get nodes -o wide
NAME           STATUS   ROLES                  AGE   VERSION   INTERNAL-IP    EXTERNAL-IP   OS-IMAGE             KERNEL-VERSION                 CONTAINER-RUNTIME
minikube       Ready    control-plane,master   25h   v1.26.3   192.168.49.2   <none>        Ubuntu 20.04.5 LTS   5.14.0-284.11.1.el9_2.x86_64   containerd://1.6.20
minikube-m02   Ready    worker                 25h   v1.26.3   192.168.49.3   <none>        Ubuntu 20.04.5 LTS   5.14.0-284.11.1.el9_2.x86_64   containerd://1.6.20
minikube-m03   Ready    worker                 25h   v1.26.3   192.168.49.4   <none>        Ubuntu 20.04.5 LTS   5.14.0-284.11.1.el9_2.x86_64   containerd://1.6.20

实际k8s以docker形态运行

$ docker ps -a
CONTAINER ID   IMAGE                    COMMAND                  CREATED        STATUS        PORTS                                                                                                                                  NAMES
22156a53883c   kicbase/stable:v0.0.39   "/usr/local/bin/entr…"   21 hours ago   Up 21 hours   127.0.0.1:32812->22/tcp, 127.0.0.1:32811->2376/tcp, 127.0.0.1:32810->5000/tcp, 127.0.0.1:32809->8443/tcp, 127.0.0.1:32808->32443/tcp   minikube-m03
108ae9029417   kicbase/stable:v0.0.39   "/usr/local/bin/entr…"   21 hours ago   Up 21 hours   127.0.0.1:32807->22/tcp, 127.0.0.1:32806->2376/tcp, 127.0.0.1:32805->5000/tcp, 127.0.0.1:32804->8443/tcp, 127.0.0.1:32803->32443/tcp   minikube-m02
f1efbf462d95   kicbase/stable:v0.0.39   "/usr/local/bin/entr…"   21 hours ago   Up 21 hours   127.0.0.1:32802->22/tcp, 127.0.0.1:32801->2376/tcp, 127.0.0.1:32800->5000/tcp, 127.0.0.1:32799->8443/tcp, 127.0.0.1:32798->32443/tcp   minikube

3.3 部署calico

$ kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.25.1/manifests/tigera-operator.yaml
$ kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.25.1/manifests/custom-resources.yaml

4. 安装kubernetes插件

4.1 部署dashboard

$ minikube addons enable dashboard

运行状态

$ kubectl get pods -n kubernetes-dashboard
NAME                                        READY   STATUS    RESTARTS   AGE
dashboard-metrics-scraper-5c6664855-wx968   1/1     Running   0          14h
kubernetes-dashboard-55c4cbbc7c-dvxls       1/1     Running   0          14h

4.2 部署metrics-server

$ minikube addons enable metrics-server

镜像下载异常的处理方式

$ minikube addons enable metrics-server
* metrics-server is an addon maintained by Kubernetes. For any concerns contact minikube on GitHub.
You can view the list of minikube maintainers at: https://github.com/kubernetes/minikube/blob/master/OWNERS
  - Using image registry.k8s.io/metrics-server/metrics-server:v0.6.3
* The 'metrics-server' addon is enabled

# 会显示失败，原因为registry.k8s.io/metrics-server/metrics-server:v0.6.3镜像没有下载完成
$ kubectl get pods -n kube-system -l k8s-app=metrics-server
NAME                               READY   STATUS             RESTARTS        AGE
metrics-server-6588d95b98-8lnkh    0/1     ImagePullBackOff   0               8m39s


# 处理方式，修改配置中的image为docker.io/bitnami/metrics-server:0.6.3
$ minikube image pull docker.io/bitnami/metrics-server:0.6.3
$ kubectl edit deployment metrics-server -n kube-system

# 处理后的运行状态
$ kubectl get pods -n kube-system -l k8s-app=metrics-server
NAME                              READY   STATUS    RESTARTS   AGE
metrics-server-674d9c9c69-tc896   1/1     Running   0          12h
metrics-server-77f9d5b8d7-b5cpw   1/1     Running   0          12h
metrics-server-85cd7db5fb-p76xn   1/1     Running   0          12h

5. 网络开启BGP

5.1 宿主机开启BGP

安装frr软件

$ sudo dnf install -y epel-release
$ sudo dnf install -y frr
$ sudo sed -i 's/bgpd=no/bgpd=yes/g' /etc/frr/daemons
$ sudo systemctl enable frr
$ sudo systemctl start frr

配置BGP,语法和cisco一致

$ sudo vtysh
minikube.sec.com# conf t
minikube.sec.com(config)#
minikube.sec.com(config-router)# router bgp 65001
minikube.sec.com(config-router)# bgp router-id 192.168.49.1
minikube.sec.com(config-router)# no bgp ebgp-requires-policy
minikube.sec.com(config-router)# neighbor 192.168.49.2 remote-as 65002
minikube.sec.com(config-router)# neighbor 192.168.49.3 remote-as 65002
minikube.sec.com(config-router)# neighbor 192.168.49.4 remote-as 65002
minikube.sec.com(config-router)# exit
minikube.sec.com(config-router)# end

5.2 Calico开启BGP

配置calico模式为BGP

$ cat calico-bgp-configuration.yaml 
apiVersion: projectcalico.org/v3
kind: BGPConfiguration
metadata:
  name: default
spec:
  logSeverityScreen: Info
  nodeToNodeMeshEnabled: false
  asNumber: 65002
  serviceClusterIPs:
  - cidr: 10.96.0.0/18
  serviceExternalIPs:
  - cidr: 10.110.0.0/18
  listenPort: 179
  bindMode: NodeIP
  communities:
  - name: bgp-minikube
    value: 65002:300:100
  prefixAdvertisements:
  - cidr: 192.168.0.0/18
    communities:
    - bgp-minikube
    - 65002:120
$ kubectl apply -f calico-bgp-configuration.yaml

配置calico对端BGP邻居

$ cat calico-bgp-peer.yaml 
apiVersion: projectcalico.org/v3
kind: BGPPeer
metadata:
  name: centos9-peer
spec:
  peerIP: 192.168.49.1
  keepOriginalNextHop: true
  asNumber: 65001
$ kubectl apply -f calico-bgp-peer.yaml

5.3 查看BGP路由

$ sudo vtysh
minikube.sec.com# show ip route bgp 
Codes: K - kernel route, C - connected, S - static, R - RIP,
       O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
       T - Table, v - VNC, V - VNC-Direct, F - PBR,
       f - OpenFabric,
       > - selected route, * - FIB route, q - queued, r - rejected, b - backup
       t - trapped, o - offload failure

B>* 10.96.0.0/18 [20/0] via 192.168.49.2, br-2004107383f1, weight 1, 00:04:56
  *                     via 192.168.49.3, br-2004107383f1, weight 1, 00:04:56
  *                     via 192.168.49.4, br-2004107383f1, weight 1, 00:04:56
B>* 10.110.0.0/18 [20/0] via 192.168.49.2, br-2004107383f1, weight 1, 00:04:56
  *                      via 192.168.49.3, br-2004107383f1, weight 1, 00:04:56
  *                      via 192.168.49.4, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.0.0/24 [20/0] via 192.168.49.2, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.0.1/32 [20/0] via 192.168.49.2, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.0.2/32 [20/0] via 192.168.49.2, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.0.3/32 [20/0] via 192.168.49.2, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.1.0/24 [20/0] via 192.168.49.3, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.1.1/32 [20/0] via 192.168.49.3, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.1.2/32 [20/0] via 192.168.49.3, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.2.0/24 [20/0] via 192.168.49.4, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.2.1/32 [20/0] via 192.168.49.4, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.2.2/32 [20/0] via 192.168.49.4, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.2.3/32 [20/0] via 192.168.49.4, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.23.0/26 [20/0] via 192.168.49.4, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.29.192/26 [20/0] via 192.168.49.3, br-2004107383f1, weight 1, 00:04:56
B>* 192.168.39.0/26 [20/0] via 192.168.49.2, br-2004107383f1, weight 1, 00:04:56
B   192.168.49.0/24 [20/0] via 192.168.49.2 inactive, weight 1, 00:04:56
                           via 192.168.49.3 inactive, weight 1, 00:04:56
                           via 192.168.49.4 inactive, weight 1, 00:04:56
minikube.sec.com#

5.4 远程机器添加路由网段

在终端机器中执行路由添加

route add  10.96.0.0 mask 255.255.192.0 <宿主机IP地址>
route add  10.110.0.0 mask 255.255.192.0 <宿主机IP地址>
route add  192.168.49.0 mask 255.255.255.0 <宿主机IP地址>

在终端windows机器上测试网络

$ kubectl get svc -A
NAMESPACE          NAME                              TYPE        CLUSTER-IP    EXTERNAL-IP   PORT(S)                  AGE
calico-apiserver   calico-api                        ClusterIP   10.96.29.75   <none>        443/TCP                  26h
calico-system      calico-kube-controllers-metrics   ClusterIP   None          <none>        9094/TCP                 26h
calico-system      calico-typha                      ClusterIP   10.96.60.16   <none>        5473/TCP                 26h
default            kubernetes                        ClusterIP   10.96.0.1     <none>        443/TCP                  27h
kube-system        kube-dns                          ClusterIP   10.96.0.10    <none>        53/UDP,53/TCP,9153/TCP   27h

# 测试网络

5.5 iptables放行

查看现有iptables策略

$ sudo iptables -L
……………………………………………………………………省略………………………………………………………………………………………………
Chain DOCKER (2 references)
target     prot opt source               destination
ACCEPT     tcp  --  anywhere             192.168.49.2         tcp dpt:32443
ACCEPT     tcp  --  anywhere             192.168.49.2         tcp dpt:pcsync-https
ACCEPT     tcp  --  anywhere             192.168.49.2         tcp dpt:commplex-main
ACCEPT     tcp  --  anywhere             192.168.49.2         tcp dpt:docker-s
ACCEPT     tcp  --  anywhere             192.168.49.2         tcp dpt:ssh
ACCEPT     tcp  --  anywhere             192.168.49.3         tcp dpt:32443
ACCEPT     tcp  --  anywhere             192.168.49.3         tcp dpt:pcsync-https
ACCEPT     tcp  --  anywhere             192.168.49.3         tcp dpt:commplex-main
ACCEPT     tcp  --  anywhere             192.168.49.3         tcp dpt:docker-s
ACCEPT     tcp  --  anywhere             192.168.49.3         tcp dpt:ssh
ACCEPT     tcp  --  anywhere             192.168.49.4         tcp dpt:32443
ACCEPT     tcp  --  anywhere             192.168.49.4         tcp dpt:pcsync-https
ACCEPT     tcp  --  anywhere             192.168.49.4         tcp dpt:commplex-main
ACCEPT     tcp  --  anywhere             192.168.49.4         tcp dpt:docker-s
ACCEPT     tcp  --  anywhere             192.168.49.4         tcp dpt:ssh
……………………………………………………………………省略………………………………………………………………………………………………

放行策略，允许外部访问pod，cluster，external-cluster ip

$ sudo iptables -t filter -I DOCKER -d 192.168.0.0/18 ! -i br-2004107383f1 -o br-2004107383f1 -j ACCEPT
$ sudo iptables -t filter -I DOCKER -d 10.96.0.0/18 ! -i br-2004107383f1 -o br-2004107383f1 -j ACCEPT
$ sudo iptables -t filter -I DOCKER -d 10.110.0.0/18 ! -i br-2004107383f1 -o br-2004107383f1 -j ACCEPT

6. 配置负载为IPVS

每个虚拟K8S容器都需要执行

# 远程到对应k8s容器中
minikube ssh -n 'name'

# 执行ipvs组件安装
sudo apt install -y ipset ipvsadm

# 设置加载模块
cat <<EOF > /etc/modules-load.d/ipvs.modules
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack
EOF

# 加载模块
chmod 755 /etc/modules-load.d/ipvs.modules && bash /etc/modules-load.d/ipvs.modules

执行修改为ipvs模式

# 修改mode为ipvs
$ kubectl edit configmap kube-proxy -n kube-system
mode: ""#原配置此处为空，需要修改为mode: "ipvs"

7. 配置purelb负载均衡

7.1 部署purelb

wget https://gitlab.com/api/v4/projects/purelb%2Fpurelb/packages/generic/manifest/0.0.1/purelb-complete.yaml
# 第一次可能会报错，需要再次运行一次
kubectl apply -f purelb-complete.yaml
kubectl apply -f purelb-complete.yaml

7.2 配置purelb地址池

# 删除不需要的功能
kubectl delete ds -n purelb lbnodeagent

# 配置purelb地址池
-> cat purelb-ipam.yaml
apiVersion: purelb.io/v1
kind: ServiceGroup
metadata:
  name: bgp-ippool
  namespace: purelb
spec:
  local:
    v4pool:
      subnet: '10.110.0.0/18'
      pool: '10.110.0.0-10.110.63.254'
      aggregation: /32

posted @ 2023-06-13 20:56 二乘八是十六阅读(626) 评论(0) 编辑收藏举报

刷新页面返回顶部

十六的博客

minikube配置网络为calico BGP模式

序言

1.基础环境

1.1 硬件基础信息

1.2 软件基础信息

1.3 minikube版本信息

2.基础配置

2.1 基础配置

2.2 安装docker

3.minikube部署

3.1 部署minikube

3.2 部署kubernetes

3.3 部署calico

4. 安装kubernetes插件

4.1 部署dashboard

4.2 部署metrics-server

5. 网络开启BGP

5.1 宿主机开启BGP

5.2 Calico开启BGP

5.3 查看BGP路由

5.4 远程机器添加路由网段

5.5 iptables放行

6. 配置负载为IPVS

7. 配置purelb负载均衡

7.1 部署purelb

7.2 配置purelb地址池

公告