ProxySQL初体验
Preface
As we all know,it's a common sense that separate reading and writing operations can immensely increse the performance of MySQL database.Especially the query operations by executing select statement relevant with large tables.Therefore,we usually choose a proxy tool to deal with it.There're a lot of tools can be used nowadays such as mycat(by Apache),dble(based on mycat by Action),atlas,dbproxy(based on atlas of Qihoo360 by MeituanDianping),cetus(by NetEase) and so forth.I'm not going to compare who's the better tool to use.I'm just prefer to having a test on another popular tool which is called "ProxySQL".
Introduce
ProxySQL is a low-weight proxy tool based on a SQLite database.It provids hight performance espcially in high concurrent environment what we can see below(compared with the MaxScale).
The configuration of ProxySQL is a three-layer structure:
We usually conifuge the parameter in layer of memory,and then load them into layer of runtime to make it take effect.In the end,we should save them to disk for durability storage.It also provides some simple syntax to transfer configurations between those layers as below:
- LOAD MYSQL object FROM MEMORY or LOAD MYSQL object TO RUNTIME
- SAVE MYSQL object TO MEMORY or SAVE MYSQL object FROM RUNTIME
- LOAD MYSQL object TO MEMORY or LOAD MYSQL object FROM DISK
- SAVE MYSQL object FROM MEMORY or SAVE MYSQL object TO DISK
- LOAD MYSQL object FROM CONFIG
The comparison with other popular middleware tools.
Official website:
Github websit:
Percona websit:
Procedure
1. Installation
Download and install ProxySQL in rpm mode on node zlm2.
1 [root@zlm2 08:00:34 ~] 2 #wget https://github.com/sysown/proxysql/releases/download/v1.4.10/proxysql-1.4.10-1-centos7.x86_64.rpm 3 --2018-08-10 08:01:20-- https://github.com/sysown/proxysql/releases/download/v1.4.10/proxysql-1.4.10-1-centos7.x86_64.rpm 4 Resolving github.com (github.com)... 13.229.188.59, 52.74.223.119, 13.250.177.223 5 Connecting to github.com (github.com)|13.229.188.59|:443... connected. 6 HTTP request sent, awaiting response... 302 Found 7 Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/27358084/305d1618-9a5b-11e8-9b04-df8e3393a6b4?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20180810%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20180810T060119Z&X-Amz-Expires=300&X-Amz-Signature=f4f676653d4cd4f34f4b75b2a4e7dfeaee8bf9d8e35dc91938f41961123a9c9f&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dproxysql-1.4.10-1-centos7.x86_64.rpm&response-content-type=application%2Foctet-stream [following] 8 --2018-08-10 08:01:29-- https://github-production-release-asset-2e65be.s3.amazonaws.com/27358084/305d1618-9a5b-11e8-9b04-df8e3393a6b4?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20180810%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20180810T060119Z&X-Amz-Expires=300&X-Amz-Signature=f4f676653d4cd4f34f4b75b2a4e7dfeaee8bf9d8e35dc91938f41961123a9c9f&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dproxysql-1.4.10-1-centos7.x86_64.rpm&response-content-type=application%2Foctet-stream 9 Resolving github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)... 54.231.32.91 10 Connecting to github-production-release-asset-2e65be.s3.amazonaws.com (github-production-release-asset-2e65be.s3.amazonaws.com)|54.231.32.91|:443... connected. 11 HTTP request sent, awaiting response... 200 OK 12 Length: 5982016 (5.7M) [application/octet-stream] 13 Saving to: ‘proxysql-1.4.10-1-centos7.x86_64.rpm’ 14 15 100%[===========================================================================================================>] 5,982,016 1.12MB/s in 12s 16 17 2018-08-10 08:02:14 (472 KB/s) - ‘proxysql-1.4.10-1-centos7.x86_64.rpm’ saved [5982016/5982016] 18 19 20 [root@zlm2 08:02:14 ~] 21 #ls -l|grep proxysql 22 -rw-r--r-- 1 root root 5982016 Aug 7 15:03 proxysql-1.4.10-1-centos7.x86_64.rpm 23 24 [root@zlm2 08:04:48 ~] 25 #yum -y localinstall proxysql-1.4.10-1-centos7.x86_64.rpm 26 Loaded plugins: fastestmirror 27 Examining proxysql-1.4.10-1-centos7.x86_64.rpm: proxysql-1.4.10-1.x86_64 28 Marking proxysql-1.4.10-1-centos7.x86_64.rpm to be installed 29 Resolving Dependencies 30 --> Running transaction check 31 ---> Package proxysql.x86_64 0:1.4.10-1 will be installed 32 --> Finished Dependency Resolution 33 34 Dependencies Resolved 35 36 ===================================================================================================================================================== 37 Package Arch Version Repository Size 38 ===================================================================================================================================================== 39 Installing: 40 proxysql x86_64 1.4.10-1 /proxysql-1.4.10-1-centos7.x86_64 22 M 41 42 Transaction Summary 43 ===================================================================================================================================================== 44 Install 1 Package 45 46 Total size: 22 M 47 Installed size: 22 M 48 Downloading packages: 49 Running transaction check 50 Running transaction test 51 Transaction test succeeded 52 Running transaction 53 Installing : proxysql-1.4.10-1.x86_64 1/1 54 Verifying : proxysql-1.4.10-1.x86_64 1/1 55 56 Installed: 57 proxysql.x86_64 0:1.4.10-1 58 59 Complete!
Check the default configuration file.
1 [root@zlm2 08:05:09 ~] 2 #rpm -ql proxysql 3 /etc/init.d/proxysql 4 /etc/proxysql.cnf //This is the configuration file of ProxySQL. 5 /usr/bin/proxysql 6 /usr/share/proxysql/tools/proxysql_galera_checker.sh //This is the script to check the status of hostgroups. 7 /usr/share/proxysql/tools/proxysql_galera_writer.pl 8 9 [root@zlm2 08:08:13 ~] 10 #cat /etc/proxysql.cnf 11 #file proxysql.cfg 12 13 ######################################################################################## 14 # This config file is parsed using libconfig , and its grammar is described in: 15 # http://www.hyperrealm.com/libconfig/libconfig_manual.html#Configuration-File-Grammar 16 # Grammar is also copied at the end of this file 17 ######################################################################################## 18 19 ######################################################################################## 20 # IMPORTANT INFORMATION REGARDING THIS CONFIGURATION FILE: 21 ######################################################################################## 22 # On startup, ProxySQL reads its config file (if present) to determine its datadir. 23 # What happens next depends on if the database file (disk) is present in the defined 24 # datadir (i.e. "/var/lib/proxysql/proxysql.db"). 25 # 26 # If the database file is found, ProxySQL initializes its in-memory configuration from 27 # the persisted on-disk database. So, disk configuration gets loaded into memory and 28 # then propagated towards the runtime configuration. 29 # 30 # If the database file is not found and a config file exists, the config file is parsed 31 # and its content is loaded into the in-memory database, to then be both saved on-disk 32 # database and loaded at runtime. 33 # 34 # IMPORTANT: If a database file is found, the config file is NOT parsed. In this case 35 # ProxySQL initializes its in-memory configuration from the persisted on-disk 36 # database ONLY. In other words, the configuration found in the proxysql.cnf 37 # file is only used to initial the on-disk database read on the first startup. 38 # 39 # In order to FORCE a re-initialise of the on-disk database from the configuration file 40 # the ProxySQL service should be started with "service proxysql initial". 41 # 42 ######################################################################################## 43 44 datadir="/var/lib/proxysql" //This is the position of SQLite database of ProxySQL. 45 46 admin_variables= 47 { 48 admin_credentials="admin:admin" //The default user/password is admin/admin. 49 # mysql_ifaces="127.0.0.1:6032;/tmp/proxysql_admin.sock" 50 mysql_ifaces="0.0.0.0:6032" //The default admin port is 6032. 51 # refresh_interval=2000 52 # debug=true 53 } 54 55 mysql_variables= 56 { 57 threads=4 58 max_connections=2048 59 default_query_delay=0 60 default_query_timeout=36000000 61 have_compress=true 62 poll_timeout=2000 63 # interfaces="0.0.0.0:6033;/tmp/proxysql.sock" 64 interfaces="0.0.0.0:6033" //The default service port is 6033. 65 default_schema="information_schema" 66 stacksize=1048576 67 server_version="5.5.30" 68 connect_timeout_server=3000 69 # make sure to configure monitor username and password 70 # https://github.com/sysown/proxysql/wiki/Global-variables#mysql-monitor_username-mysql-monitor_password 71 monitor_username="monitor" 72 monitor_password="monitor" 73 monitor_history=600000 74 monitor_connect_interval=60000 75 monitor_ping_interval=10000 76 monitor_read_only_interval=1500 77 monitor_read_only_timeout=500 78 ping_interval_server_msec=120000 79 ping_timeout_server=500 80 commands_stats=true 81 sessions_sort=true 82 connect_retries_on_failure=10 83 } 84 85 86 # defines all the MySQL servers 87 mysql_servers = 88 ( 89 # { 90 # address = "127.0.0.1" # no default, required . If port is 0 , address is interpred as a Unix Socket Domain 91 # port = 3306 # no default, required . If port is 0 , address is interpred as a Unix Socket Domain 92 # hostgroup = 0 # no default, required 93 # status = "ONLINE" # default: ONLINE 94 # weight = 1 # default: 1 95 # compression = 0 # default: 0 96 # max_replication_lag = 10 # default 0 . If greater than 0 and replication lag passes such threshold, the server is shunned 97 # }, 98 # { 99 # address = "/var/lib/mysql/mysql.sock" 100 # port = 0 101 # hostgroup = 0 102 # }, 103 # { 104 # address="127.0.0.1" 105 # port=21891 106 # hostgroup=0 107 # max_connections=200 108 # }, 109 # { address="127.0.0.2" , port=3306 , hostgroup=0, max_connections=5 }, 110 # { address="127.0.0.1" , port=21892 , hostgroup=1 }, 111 # { address="127.0.0.1" , port=21893 , hostgroup=1 } 112 # { address="127.0.0.2" , port=3306 , hostgroup=1 }, 113 # { address="127.0.0.3" , port=3306 , hostgroup=1 }, 114 # { address="127.0.0.4" , port=3306 , hostgroup=1 }, 115 # { address="/var/lib/mysql/mysql.sock" , port=0 , hostgroup=1 } 116 ) 117 118 119 # defines all the MySQL users 120 mysql_users: 121 ( 122 # { 123 # username = "username" # no default , required 124 # password = "password" # default: '' 125 # default_hostgroup = 0 # default: 0 126 # active = 1 # default: 1 127 # }, 128 # { 129 # username = "root" 130 # password = "" 131 # default_hostgroup = 0 132 # max_connections=1000 133 # default_schema="test" 134 # active = 1 135 # }, 136 # { username = "user1" , password = "password" , default_hostgroup = 0 , active = 0 } 137 ) 138 139 140 141 #defines MySQL Query Rules 142 mysql_query_rules: 143 ( 144 # { 145 # rule_id=1 146 # active=1 147 # match_pattern="^SELECT .* FOR UPDATE$" 148 # destination_hostgroup=0 149 # apply=1 150 # }, 151 # { 152 # rule_id=2 153 # active=1 154 # match_pattern="^SELECT" 155 # destination_hostgroup=1 156 # apply=1 157 # } 158 ) 159 160 scheduler= 161 ( 162 # { 163 # id=1 164 # active=0 165 # interval_ms=10000 166 # filename="/var/lib/proxysql/proxysql_galera_checker.sh" 167 # arg1="0" 168 # arg2="0" 169 # arg3="0" 170 # arg4="1" 171 # arg5="/var/lib/proxysql/proxysql_galera_checker.log" 172 # } 173 ) 174 175 176 mysql_replication_hostgroups= 177 ( 178 # { 179 # writer_hostgroup=30 180 # reader_hostgroup=40 181 # comment="test repl 1" 182 # }, 183 # { 184 # writer_hostgroup=50 185 # reader_hostgroup=60 186 # comment="test repl 2" 187 # } 188 ) 189 190 191 192 193 # http://www.hyperrealm.com/libconfig/libconfig_manual.html#Configuration-File-Grammar 194 # 195 # Below is the BNF grammar for configuration files. Comments and include directives are not part of the grammar, so they are not included here. 196 # 197 # configuration = setting-list | empty 198 # 199 # setting-list = setting | setting-list setting 200 # 201 # setting = name (":" | "=") value (";" | "," | empty) 202 # 203 # value = scalar-value | array | list | group 204 # 205 # value-list = value | value-list "," value 206 # 207 # scalar-value = boolean | integer | integer64 | hex | hex64 | float 208 # | string 209 # 210 # scalar-value-list = scalar-value | scalar-value-list "," scalar-value 211 # 212 # array = "[" (scalar-value-list | empty) "]" 213 # 214 # list = "(" (value-list | empty) ")" 215 # 216 # group = "{" (setting-list | empty) "}" 217 # 218 # empty =
Start ProxySQL and check tables of it.
1 [root@zlm2 08:30:12 ~] 2 #service proxysql start 3 Starting ProxySQL: 2018-08-10 08:30:38 [INFO] Using config file /etc/proxysql.cnf 4 DONE! 5 6 [root@zlm2 08:30:38 ~] 7 #ps aux|grep proxysql 8 root 4307 0.0 0.5 58688 5184 ? S 08:30 0:00 proxysql -c /etc/proxysql.cnf -D /var/lib/proxysql 9 root 4308 0.3 1.8 102612 19020 ? Sl 08:30 0:00 proxysql -c /etc/proxysql.cnf -D /var/lib/proxysql 10 root 4335 0.0 0.0 112640 960 pts/0 R+ 08:30 0:00 grep --color=auto proxysql 11 12 [root@zlm2 08:32:20 ~] 13 #cd /var/lib/proxysql 14 15 [root@zlm2 08:33:55 /var/lib/proxysql] 16 #ls -l 17 total 244 18 -rw------- 1 root root 122880 Aug 10 08:16 proxysql.db 19 -rw------- 1 root root 7320 Aug 10 08:30 proxysql.log 20 -rw-r--r-- 1 root root 5 Aug 10 08:30 proxysql.pid 21 -rw------- 1 root root 110592 Aug 10 08:33 proxysql_stats.db 22 -rw-r--r-- 1 root root 2 Aug 10 08:29 reload 23 24 [root@zlm2 08:33:57 /var/lib/proxysql] 25 #mysql -uadmin -padmin -h127.0.0.1 -P6032 26 mysql: [Warning] Using a password on the command line interface can be insecure. 27 Welcome to the MySQL monitor. Commands end with ; or \g. 28 Your MySQL connection id is 1 29 Server version: 5.5.30 (ProxySQL Admin Module) 30 31 Copyright (c) 2009-2018 Percona LLC and/or its affiliates 32 Copyright (c) 2000, 2018, Oracle and/or its affiliates. All rights reserved. 33 34 Oracle is a registered trademark of Oracle Corporation and/or its 35 affiliates. Other names may be trademarks of their respective 36 owners. 37 38 Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. 39 40 (admin@127.0.0.1 6032)[(none)]>show databases; 41 +-----+---------------+-------------------------------------+ 42 | seq | name | file | 43 +-----+---------------+-------------------------------------+ 44 | 0 | main | | 45 | 2 | disk | /var/lib/proxysql/proxysql.db | 46 | 3 | stats | | 47 | 4 | monitor | | 48 | 5 | stats_history | /var/lib/proxysql/proxysql_stats.db | 49 +-----+---------------+-------------------------------------+ 50 5 rows in set (0.00 sec) 51 52 //There's five databases in all in PorxySQL database.In the previous version,there's no stats_history database; 53 54 (admin@127.0.0.1 6032)[(none)]>show tables from main; 55 +--------------------------------------------+ 56 | tables | 57 +--------------------------------------------+ 58 | global_variables | //It contains all the variables of ProxySQL. 59 | mysql_collations | 60 | mysql_group_replication_hostgroups | 61 | mysql_query_rules | //It contains all the query rules we'd like to use. 62 | mysql_query_rules_fast_routing | 63 | mysql_replication_hostgroups | 64 | mysql_servers | //It contains the information of all servers relevant with MySQL. 65 | mysql_users | //It contains the information of all users relevant with MySQL. 66 | proxysql_servers | //It contains the information of all servers relevant with ProxySQL. 67 | runtime_checksums_values | 68 | runtime_global_variables | 69 | runtime_mysql_group_replication_hostgroups | 70 | runtime_mysql_query_rules | 71 | runtime_mysql_query_rules_fast_routing | 72 | runtime_mysql_replication_hostgroups | 73 | runtime_mysql_servers | 74 | runtime_mysql_users | 75 | runtime_proxysql_servers | 76 | runtime_scheduler | 77 | scheduler | 78 +--------------------------------------------+ 79 20 rows in set (0.00 sec) 80 81 //All the "runtime" prefixed tables in "main" database contain the current configuration in runtime mode.The other tables can be modified in memory mode. 82 83 (admin@127.0.0.1 6032)[(none)]>show tables from disk; 84 +------------------------------------+ 85 | tables | 86 +------------------------------------+ 87 | global_variables | 88 | mysql_collations | 89 | mysql_group_replication_hostgroups | 90 | mysql_query_rules | 91 | mysql_query_rules_fast_routing | 92 | mysql_replication_hostgroups | 93 | mysql_servers | 94 | mysql_users | 95 | proxysql_servers | 96 | scheduler | 97 +------------------------------------+ 98 10 rows in set (0.00 sec) 99 100 //All the tables contains the relevant data which we have saved in disk by "SAVE MYSQL xxx TO DISK;" command. 101 //All the tables have the the same structure as those in "main" database. 102 103 (admin@127.0.0.1 6032)[(none)]>show tables from monitor; 104 +------------------------------------+ 105 | tables | 106 +------------------------------------+ 107 | mysql_server_connect_log | 108 | mysql_server_group_replication_log | 109 | mysql_server_ping_log | 110 | mysql_server_read_only_log | 111 | mysql_server_replication_lag_log | 112 +------------------------------------+ 113 5 rows in set (0.00 sec) 114 115 (admin@127.0.0.1 6032)[(none)]>show tables from stats; 116 +--------------------------------------+ 117 | tables | 118 +--------------------------------------+ 119 | global_variables | 120 | stats_memory_metrics | 121 | stats_mysql_commands_counters | 122 | stats_mysql_connection_pool | 123 | stats_mysql_connection_pool_reset | 124 | stats_mysql_global | 125 | stats_mysql_prepared_statements_info | 126 | stats_mysql_processlist | 127 | stats_mysql_query_digest | 128 | stats_mysql_query_digest_reset | 129 | stats_mysql_query_rules | 130 | stats_mysql_users | 131 | stats_proxysql_servers_checksums | 132 | stats_proxysql_servers_metrics | 133 | stats_proxysql_servers_status | 134 +--------------------------------------+ 135 15 rows in set (0.00 sec)
2. Configure the separation of reading and writing.
Configure the hostgroup id.
1 (admin@127.0.0.1 6032)[main]>show create table mysql_replication_hostgroups\G 2 *************************** 1. row *************************** 3 table: mysql_replication_hostgroups 4 Create Table: CREATE TABLE mysql_replication_hostgroups ( 5 writer_hostgroup INT CHECK (writer_hostgroup>=0) NOT NULL PRIMARY KEY, 6 reader_hostgroup INT NOT NULL CHECK (reader_hostgroup<>writer_hostgroup AND reader_hostgroup>0), 7 comment VARCHAR NOT NULL DEFAULT '', UNIQUE (reader_hostgroup)) 8 1 row in set (0.00 sec) 9 10 (admin@127.0.0.1 6032)[main]>insert into mysql_replication_hostgroups(writer_hostgroup,reader_hostgroup,comment) values(10,20,'Test of ProxySQL'); 11 Query OK, 1 row affected (0.00 sec) 12 13 (admin@127.0.0.1 6032)[main]>select * from mysql_replication_hostgroups; 14 +------------------+------------------+------------------+ 15 | writer_hostgroup | reader_hostgroup | comment | 16 +------------------+------------------+------------------+ 17 | 10 | 20 | Test of ProxySQL | 18 +------------------+------------------+------------------+ 19 1 row in set (0.00 sec) 20 21 (admin@127.0.0.1 6032)[main]>select * from main.runtime_mysql_replication_hostgroups; 22 Empty set (0.00 sec) 23 24 (admin@127.0.0.1 6032)[main]>select * from disk.mysql_replication_hostgroups; 25 Empty set (0.00 sec) 26 27 (admin@127.0.0.1 6032)[main]>load mysql servers to runtime;save mysql servers to disk; 28 Query OK, 0 rows affected (0.00 sec) 29 30 Query OK, 0 rows affected (0.04 sec) 31 32 (admin@127.0.0.1 6032)[main]>select * from main.runtime_mysql_replication_hostgroups; 33 +------------------+------------------+------------------+ 34 | writer_hostgroup | reader_hostgroup | comment | 35 +------------------+------------------+------------------+ 36 | 10 | 20 | Test of ProxySQL | 37 +------------------+------------------+------------------+ 38 1 row in set (0.00 sec) 39 40 (admin@127.0.0.1 6032)[main]>select * from disk.mysql_replication_hostgroups; 41 +------------------+------------------+------------------+ 42 | writer_hostgroup | reader_hostgroup | comment | 43 +------------------+------------------+------------------+ 44 | 10 | 20 | Test of ProxySQL | 45 +------------------+------------------+------------------+ 46 1 row in set (0.00 sec)
Configure the MySQL servers in different hostgroup.
1 (admin@127.0.0.1 6032)[main]>show create table mysql_servers\G 2 *************************** 1. row *************************** 3 table: mysql_servers 4 Create Table: CREATE TABLE mysql_servers ( 5 hostgroup_id INT CHECK (hostgroup_id>=0) NOT NULL DEFAULT 0, 6 hostname VARCHAR NOT NULL, 7 port INT NOT NULL DEFAULT 3306, 8 status VARCHAR CHECK (UPPER(status) IN ('ONLINE','SHUNNED','OFFLINE_SOFT', 'OFFLINE_HARD')) NOT NULL DEFAULT 'ONLINE', 9 weight INT CHECK (weight >= 0) NOT NULL DEFAULT 1, 10 compression INT CHECK (compression >=0 AND compression <= 102400) NOT NULL DEFAULT 0, 11 max_connections INT CHECK (max_connections >=0) NOT NULL DEFAULT 1000, 12 max_replication_lag INT CHECK (max_replication_lag >= 0 AND max_replication_lag <= 126144000) NOT NULL DEFAULT 0, 13 use_ssl INT CHECK (use_ssl IN(0,1)) NOT NULL DEFAULT 0, 14 max_latency_ms INT UNSIGNED CHECK (max_latency_ms>=0) NOT NULL DEFAULT 0, 15 comment VARCHAR NOT NULL DEFAULT '', 16 PRIMARY KEY (hostgroup_id, hostname, port) ) 17 1 row in set (0.00 sec) 18 19 (admin@127.0.0.1 6032)[main]>insert into mysql_servers(hostgrop_id,hostname,port,max_connections,max_replication_lag,max_latency_ms) values(10,'192.168.1.101',3308,50,10,1000),(20,'192.168.1.102',3308,50,10,1000),(20,'192.168.1.103',3308,50,10,1000); 20 Query OK, 3 row affected (0.01 sec) 21 22 (admin@127.0.0.1 6032)[main]>select * from mysql_servers; 23 +--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+ 24 | hostgroup_id | hostname | port | status | weight | compression | max_connections | max_replication_lag | use_ssl | max_latency_ms | comment | 25 +--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+ 26 | 10 | 192.168.1.101 | 3308 | ONLINE | 1 | 0 | 50 | 10 | 0 | 1000 | | 27 | 20 | 191.168.1.102 | 3308 | ONLINE | 1 | 0 | 50 | 10 | 0 | 1000 | | 28 | 20 | 192.168.1.103 | 3308 | ONLINE | 1 | 0 | 50 | 10 | 0 | 1000 | | 29 +--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+ 30 3 rows in set (0.00 sec) 31 32 (admin@127.0.0.1 6032)[main]>select * from runtime_mysql_servers; 33 Empty set (0.00 sec) 34 35 (admin@127.0.0.1 6032)[main]>select * from disk.mysql_servers; 36 Empty set (0.00 sec) 37 38 (admin@127.0.0.1 6032)[main]>load mysql servers to runtime;save mysql servers to disk; 39 Query OK, 0 rows affected (0.01 sec) 40 41 Query OK, 0 rows affected (0.03 sec) 42 43 (admin@127.0.0.1 6032)[main]>select * from runtime_mysql_servers; 44 +--------------+---------------+------+---------+--------+-------------+-----------------+---------------------+---------+----------------+---------+ 45 | hostgroup_id | hostname | port | status | weight | compression | max_connections | max_replication_lag | use_ssl | max_latency_ms | comment | 46 +--------------+---------------+------+---------+--------+-------------+-----------------+---------------------+---------+----------------+---------+ 47 | 20 | 191.168.1.102 | 3308 | SHUNNED | 1 | 0 | 50 | 10 | 0 | 1000 | | 48 | 20 | 192.168.1.101 | 3308 | ONLINE | 1 | 0 | 50 | 10 | 0 | 1000 | | 49 | 20 | 192.168.1.103 | 3308 | ONLINE | 1 | 0 | 50 | 10 | 0 | 1000 | | 50 +--------------+---------------+------+---------+--------+-------------+-----------------+---------------------+---------+----------------+---------+ 51 3 rows in set (0.00 sec) 52 53 (admin@127.0.0.1 6032)[main]>select * from disk.mysql_servers; 54 +--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+ 55 | hostgroup_id | hostname | port | status | weight | compression | max_connections | max_replication_lag | use_ssl | max_latency_ms | comment | 56 +--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+ 57 | 10 | 192.168.1.101 | 3308 | ONLINE | 1 | 0 | 50 | 10 | 0 | 1000 | | 58 | 20 | 191.168.1.102 | 3308 | ONLINE | 1 | 0 | 50 | 10 | 0 | 1000 | | 59 | 20 | 192.168.1.103 | 3308 | ONLINE | 1 | 0 | 50 | 10 | 0 | 1000 | | 60 +--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+ 61 3 rows in set (0.00 sec)
Configure the monitor user and product user.
1 [root@zlm2 09:54:24 /var/lib/proxysql] 2 #ls -l 3 total 748 4 -rw------- 1 root root 122880 Aug 10 09:39 proxysql.db 5 -rw------- 1 root root 347160 Aug 10 09:47 proxysql.log 6 -rw-r--r-- 1 root root 5 Aug 10 08:30 proxysql.pid 7 -rw------- 1 root root 110592 Aug 10 09:46 proxysql_stats.db 8 -rw-r--r-- 1 root root 2 Aug 10 08:29 reload 9 10 [root@zlm2 09:54:32 /var/lib/proxysql] 11 #tail proxysql.log 12 2018-08-10 09:54:30 MySQL_Monitor.cpp:605:monitor_read_only_thread(): [ERROR] Timeout on read_only check for 192.168.1.101:3308 after 0ms. Unable to create a connection. If the server is overload, increase mysql-monitor_connect_timeout. Error: timeout on creating new connection: Access denied for user 'monitor'@'192.168.1.101' (using password: YES). 13 2018-08-10 09:54:30 MySQL_Monitor.cpp:724:monitor_read_only_thread(): [ERROR] Server 192.168.1.101:3308 missed 3 read_only checks. Assuming read_only=1 14 2018-08-10 09:54:32 MySQL_Monitor.cpp:605:monitor_read_only_thread(): [ERROR] Timeout on read_only check for 192.168.1.103:3308 after 1ms. Unable to create a connection. If the server is overload, increase mysql-monitor_connect_timeout. Error: timeout on creating new connection: Access denied for user 'monitor'@'192.168.1.101' (using password: YES). 15 2018-08-10 09:54:32 MySQL_Monitor.cpp:724:monitor_read_only_thread(): [ERROR] Server 192.168.1.103:3308 missed 3 read_only checks. Assuming read_only=1 16 2018-08-10 09:54:32 MySQL_Monitor.cpp:605:monitor_read_only_thread(): [ERROR] Timeout on read_only check for 192.168.1.101:3308 after 0ms. Unable to create a connection. If the server is overload, increase mysql-monitor_connect_timeout. Error: timeout on creating new connection: Access denied for user 'monitor'@'192.168.1.101' (using password: YES). 17 2018-08-10 09:54:32 MySQL_Monitor.cpp:724:monitor_read_only_thread(): [ERROR] Server 192.168.1.101:3308 missed 3 read_only checks. Assuming read_only=1 18 2018-08-10 09:54:33 MySQL_Monitor.cpp:605:monitor_read_only_thread(): [ERROR] Timeout on read_only check for 192.168.1.101:3308 after 0ms. Unable to create a connection. If the server is overload, increase mysql-monitor_connect_timeout. Error: timeout on creating new connection: Access denied for user 'monitor'@'192.168.1.101' (using password: YES). 19 2018-08-10 09:54:33 MySQL_Monitor.cpp:724:monitor_read_only_thread(): [ERROR] Server 192.168.1.101:3308 missed 3 read_only checks. Assuming read_only=1 20 2018-08-10 09:54:33 MySQL_Monitor.cpp:605:monitor_read_only_thread(): [ERROR] Timeout on read_only check for 192.168.1.103:3308 after 1ms. Unable to create a connection. If the server is overload, increase mysql-monitor_connect_timeout. Error: timeout on creating new connection: Access denied for user 'monitor'@'192.168.1.101' (using password: YES). 21 2018-08-10 09:54:33 MySQL_Monitor.cpp:724:monitor_read_only_thread(): [ERROR] Server 192.168.1.103:3308 missed 3 read_only checks. Assuming read_only=1 22 23 [root@zlm2 09:54:18 /data/mysql/mysql3308/data] 24 #tail error.log 25 2018-08-10T09:54:09.757619+01:00 773 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 26 2018-08-10T09:54:11.248093+01:00 774 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 27 2018-08-10T09:54:12.748305+01:00 775 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 28 2018-08-10T09:54:14.253693+01:00 776 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 29 2018-08-10T09:54:15.753818+01:00 777 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 30 2018-08-10T09:54:17.274359+01:00 778 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 31 2018-08-10T09:54:18.754761+01:00 779 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 32 2018-08-10T09:54:19.177448+01:00 780 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 33 2018-08-10T09:54:19.386483+01:00 781 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 34 2018-08-10T09:54:20.270737+01:00 782 [Note] Access denied for user 'monitor'@'192.168.1.101' (using password: YES) 35 36 //The user "monitor" has no privileges to connect in MySQL instance yet. 37 38 //Add monitor user "monitor" in the MySQL instance and grant privileges. 39 (root@localhost mysql3308.sock)[(none)]>grant all privileges on *.* to monitor@'%' identified by 'monitor'; 40 Query OK, 0 rows affected, 1 warning (0.02 sec) 41 42 (root@localhost mysql3308.sock)[(none)]>select user,host from mysql.user; 43 +---------------+-------------+ 44 | user | host | 45 +---------------+-------------+ 46 | monitor | % | 47 | repl | 192.168.1.% | 48 | zlm | 192.168.1.% | 49 | mysql.session | localhost | 50 | mysql.sys | localhost | 51 | root | localhost | 52 | sst | localhost | 53 +---------------+-------------+ 54 7 rows in set (0.00 sec) 55 56 [root@zlm2 10:03:06 /var/lib/proxysql] 57 #tail -20 proxysql.log 58 2018-08-10 10:00:20 [INFO] New mysql_replication_hostgroups table 59 writer_hostgroup: 10 , reader_hostgroup: 20, Test of ProxySQL 60 2018-08-10 10:00:20 [INFO] New mysql_group_replication_hostgroups table 61 2018-08-10 10:00:20 [INFO] Dumping current MySQL Servers structures for hostgroup ALL 62 HID: 10 , address: 192.168.1.103 , port: 3308 , weight: 1 , status: ONLINE , max_connections: 50 , max_replication_lag: 10 , use_ssl: 0 , max_latency_ms: 1000000000 , comment: 63 HID: 10 , address: 192.168.1.101 , port: 3308 , weight: 1 , status: ONLINE , max_connections: 50 , max_replication_lag: 10 , use_ssl: 0 , max_latency_ms: 1000000000 , comment: 64 HID: 20 , address: 191.168.1.102 , port: 3308 , weight: 1 , status: ONLINE , max_connections: 50 , max_replication_lag: 10 , use_ssl: 0 , max_latency_ms: 1000000000 , comment: 65 HID: 20 , address: 192.168.1.103 , port: 3308 , weight: 1 , status: ONLINE , max_connections: 50 , max_replication_lag: 10 , use_ssl: 0 , max_latency_ms: 1000000000 , comment: 66 HID: 20 , address: 192.168.1.101 , port: 3308 , weight: 1 , status: ONLINE , max_connections: 50 , max_replication_lag: 10 , use_ssl: 0 , max_latency_ms: 1000000000 , comment: 67 2018-08-10 10:00:20 [INFO] Dumping mysql_servers 68 +--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+-----------------+ 69 | hostgroup_id | hostname | port | weight | status | compression | max_connections | max_replication_lag | use_ssl | max_latency_ms | comment | mem_pointer | 70 +--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+-----------------+ 71 | 10 | 192.168.1.103 | 3308 | 1 | 0 | 0 | 50 | 10 | 0 | 1000 | | 139639198273536 | 72 | 20 | 192.168.1.101 | 3308 | 1 | 0 | 0 | 50 | 10 | 0 | 1000 | | 139639198867456 | 73 | 20 | 192.168.1.103 | 3308 | 1 | 0 | 0 | 50 | 10 | 0 | 1000 | | 139639212485120 | 74 | 20 | 191.168.1.102 | 3308 | 1 | 0 | 0 | 50 | 10 | 0 | 1000 | | 139639212484992 | 75 | 10 | 192.168.1.101 | 3308 | 1 | 0 | 0 | 50 | 10 | 0 | 1000 | | 139639198412544 | 76 +--------------+---------------+------+--------+--------+-------------+-----------------+---------------------+---------+----------------+---------+-----------------+ 77 2018-08-10 10:00:29 MySQL_Monitor.cpp:1437:monitor_ping(): [ERROR] Server 191.168.1.102:3308 missed 3 heartbeats, shunning it and killing all the connections. Disabling other checks until the node comes back online. 78 79 //Now,the monitor user "monitor" of ProxySQL can get the monitor information. 80 81 //Continue to configure the product user which we need to connect in MySQL instance. 82 (admin@127.0.0.1 6032)[main]>show create table mysql_users\G 83 *************************** 1. row *************************** 84 table: mysql_users 85 Create Table: CREATE TABLE mysql_users ( 86 username VARCHAR NOT NULL, 87 password VARCHAR, 88 active INT CHECK (active IN (0,1)) NOT NULL DEFAULT 1, 89 use_ssl INT CHECK (use_ssl IN (0,1)) NOT NULL DEFAULT 0, 90 default_hostgroup INT NOT NULL DEFAULT 0, 91 default_schema VARCHAR, 92 schema_locked INT CHECK (schema_locked IN (0,1)) NOT NULL DEFAULT 0, 93 transaction_persistent INT CHECK (transaction_persistent IN (0,1)) NOT NULL DEFAULT 1, 94 fast_forward INT CHECK (fast_forward IN (0,1)) NOT NULL DEFAULT 0, 95 backend INT CHECK (backend IN (0,1)) NOT NULL DEFAULT 1, 96 frontend INT CHECK (frontend IN (0,1)) NOT NULL DEFAULT 1, 97 max_connections INT CHECK (max_connections >=0) NOT NULL DEFAULT 10000, 98 PRIMARY KEY (username, backend), 99 UNIQUE (username, frontend)) 100 1 row in set (0.00 sec) 101 102 (admin@127.0.0.1 6032)[main]>insert into mysql_users(username,password,active,default_hostgroup,default_schema) values('zlm','zlmzlm',1,20,'zlm'); 103 Query OK, 1 row affected (0.00 sec) 104 105 (admin@127.0.0.1 6032)[main]>select * from mysql_users; 106 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 107 | username | password | active | use_ssl | default_hostgroup | default_schema | schema_locked | transaction_persistent | fast_forward | backend | frontend | max_connections | 108 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 109 | zlm | zlmzlm | 1 | 0 | 20 | zlm | 0 | 1 | 0 | 1 | 1 | 10000 | 110 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 111 1 row in set (0.00 sec) 112 113 (admin@127.0.0.1 6032)[main]>load mysql users to runtime;save mysql users to disk; 114 Query OK, 0 rows affected (0.00 sec) 115 116 Query OK, 0 rows affected (0.01 sec) 117 118 (admin@127.0.0.1 6032)[main]>select * from runtime_mysql_users; 119 +----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 120 | username | password | active | use_ssl | default_hostgroup | default_schema | schema_locked | transaction_persistent | fast_forward | backend | frontend | max_connections | 121 +----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 122 | zlm | *512FB3FAA6F522E351929CAC70AD8EBB0F5901B6 | 1 | 0 | 20 | zlm | 0 | 1 | 0 | 0 | 1 | 10000 | 123 | zlm | *512FB3FAA6F522E351929CAC70AD8EBB0F5901B6 | 1 | 0 | 20 | zlm | 0 | 1 | 0 | 1 | 0 | 10000 | 124 +----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 125 2 rows in set (0.00 sec) 126 127 (admin@127.0.0.1 6032)[main]>select * from disk.mysql_users; 128 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 129 | username | password | active | use_ssl | default_hostgroup | default_schema | schema_locked | transaction_persistent | fast_forward | backend | frontend | max_connections | 130 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 131 | zlm | zlmzlm | 1 | 0 | 20 | zlm | 0 | 1 | 0 | 1 | 1 | 10000 | 132 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 133 1 row in set (0.00 sec)
Configure the mysql query rules.
1 (admin@127.0.0.1 6032)[main]>show create table mysql_query_rules\G 2 *************************** 1. row *************************** 3 table: mysql_query_rules 4 Create Table: CREATE TABLE mysql_query_rules ( 5 rule_id INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL, 6 active INT CHECK (active IN (0,1)) NOT NULL DEFAULT 0, 7 username VARCHAR, 8 schemaname VARCHAR, 9 flagIN INT NOT NULL DEFAULT 0, 10 client_addr VARCHAR, 11 proxy_addr VARCHAR, 12 proxy_port INT, 13 digest VARCHAR, 14 match_digest VARCHAR, 15 match_pattern VARCHAR, 16 negate_match_pattern INT CHECK (negate_match_pattern IN (0,1)) NOT NULL DEFAULT 0, 17 re_modifiers VARCHAR DEFAULT 'CASELESS', 18 flagOUT INT, 19 replace_pattern VARCHAR, 20 destination_hostgroup INT DEFAULT NULL, 21 cache_ttl INT CHECK(cache_ttl > 0), 22 reconnect INT CHECK (reconnect IN (0,1)) DEFAULT NULL, 23 timeout INT UNSIGNED, 24 retries INT CHECK (retries>=0 AND retries <=1000), 25 delay INT UNSIGNED, 26 next_query_flagIN INT UNSIGNED, 27 mirror_flagOUT INT UNSIGNED, 28 mirror_hostgroup INT UNSIGNED, 29 error_msg VARCHAR, 30 OK_msg VARCHAR, 31 sticky_conn INT CHECK (sticky_conn IN (0,1)), 32 multiplex INT CHECK (multiplex IN (0,1,2)), 33 log INT CHECK (log IN (0,1)), 34 apply INT CHECK(apply IN (0,1)) NOT NULL DEFAULT 0, 35 comment VARCHAR) 36 1 row in set (0.00 sec) 37 38 (admin@127.0.0.1 6032)[main]>insert into mysql_query_rules(active,username,match_pattern,schemaname,destination_hostgroup,apply) values(1,'zlm','^select','zlm',20,1); 39 Query OK, 1 row affected (0.00 sec) 40 41 (admin@127.0.0.1 6032)[main]>select active,username,match_pattern,schemaname,destination_hostgroup,apply from mysql_query_rules; 42 +--------+----------+---------------+------------+-----------------------+-------+ 43 | active | username | match_pattern | schemaname | destination_hostgroup | apply | 44 +--------+----------+---------------+------------+-----------------------+-------+ 45 | 1 | zlm | ^select | zlm | 20 | 1 | 46 +--------+----------+---------------+------------+-----------------------+-------+ 47 1 row in set (0.00 sec) 48 49 (admin@127.0.0.1 6032)[main]>load mysql query rules to runtime;save mysql query rules to disk; 50 Query OK, 0 rows affected (0.00 sec) 51 52 Query OK, 0 rows affected (0.02 sec) 53 54 (admin@127.0.0.1 6032)[main]>select active,username,match_pattern,schemaname,destination_hostgroup,apply from runtime_mysql_query_rules; 55 +--------+----------+---------------+------------+-----------------------+-------+ 56 | active | username | match_pattern | schemaname | destination_hostgroup | apply | 57 +--------+----------+---------------+------------+-----------------------+-------+ 58 | 1 | zlm | ^select | zlm | 20 | 1 | 59 +--------+----------+---------------+------------+-----------------------+-------+ 60 1 row in set (0.00 sec) 61 62 (admin@127.0.0.1 6032)[main]>select active,username,match_pattern,schemaname,destination_hostgroup,apply from disk.mysql_query_rules; 63 +--------+----------+---------------+------------+-----------------------+-------+ 64 | active | username | match_pattern | schemaname | destination_hostgroup | apply | 65 +--------+----------+---------------+------------+-----------------------+-------+ 66 | 1 | zlm | ^select | zlm | 20 | 1 | 67 +--------+----------+---------------+------------+-----------------------+-------+ 68 1 row in set (0.00 sec)
3. Test dml operations
Login MySQL Instance with product user 'zlm'.
1 //Connect with port 6033 to use the query rule of ProxySQL. 2 [root@zlm2 11:13:16 /data/mysql/mysql3308/data] 3 #mysql -uzlm -pzlmzlm -h192.168.1.101 -P6033 4 mysql: [Warning] Using a password on the command line interface can be insecure. 5 Welcome to the MySQL monitor. Commands end with ; or \g. 6 Your MySQL connection id is 4 7 Server version: 5.5.30 (ProxySQL) 8 9 Copyright (c) 2009-2018 Percona LLC and/or its affiliates 10 Copyright (c) 2000, 2018, Oracle and/or its affiliates. All rights reserved. 11 12 Oracle is a registered trademark of Oracle Corporation and/or its 13 affiliates. Other names may be trademarks of their respective 14 owners. 15 16 Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. 17 18 (zlm@192.168.1.101 6033)[(none)]>show tables; //The default database automatically became zlm although I have't specify which database to use. 19 +---------------+ 20 | Tables_in_zlm | 21 +---------------+ 22 | t1 | 23 | t2 | 24 +---------------+ 25 2 rows in set (0.00 sec) 26 27 (zlm@192.168.1.101 6033)[(none)]>select * from t1; 28 +----+------------+ 29 | id | name | 30 +----+------------+ 31 | 1 | MySQL | 32 | 2 | Oracle | 33 | 3 | PostgreSQL | 34 | 4 | Redis | 35 +----+------------+ 36 4 rows in set (0.00 sec) 37 38 (zlm@192.168.1.101 6033)[(none)]>insert into t1 values(5,'MongoDB'); 39 Query OK, 1 row affected (0.01 sec) 40 41 (zlm@192.168.1.101 6033)[(none)]>select * from t1; 42 +----+------------+ 43 | id | name | 44 +----+------------+ 45 | 1 | MySQL | 46 | 2 | Oracle | 47 | 3 | PostgreSQL | 48 | 4 | Redis | 49 | 5 | MongoDB | 50 +----+------------+ 51 5 rows in set (0.00 sec) 52 53 //Check the stats we've catched in "stats_mysql_query_digest" table of "stats" database of ProxySQL. 54 (admin@127.0.0.1 6032)[main]>use stats; 55 Reading table information for completion of table and column names 56 You can turn off this feature to get a quicker startup with -A 57 58 Database changed 59 (admin@127.0.0.1 6032)[stats]>show tables; //Notice,if you don't specify "from xxx",it will show tables of "main" database. 60 +--------------------------------------------+ 61 | tables | 62 +--------------------------------------------+ 63 | global_variables | 64 | mysql_collations | 65 | mysql_group_replication_hostgroups | 66 | mysql_query_rules | 67 | mysql_query_rules_fast_routing | 68 | mysql_replication_hostgroups | 69 | mysql_servers | 70 | mysql_users | 71 | proxysql_servers | 72 | runtime_checksums_values | 73 | runtime_global_variables | 74 | runtime_mysql_group_replication_hostgroups | 75 | runtime_mysql_query_rules | 76 | runtime_mysql_query_rules_fast_routing | 77 | runtime_mysql_replication_hostgroups | 78 | runtime_mysql_servers | 79 | runtime_mysql_users | 80 | runtime_proxysql_servers | 81 | runtime_scheduler | 82 | scheduler | 83 +--------------------------------------------+ 84 20 rows in set (0.00 sec) 85 86 (admin@127.0.0.1 6032)[stats]>show tables from stats; //Speicify the target database to be "stats". 87 +--------------------------------------+ 88 | tables | 89 +--------------------------------------+ 90 | global_variables | 91 | stats_memory_metrics | 92 | stats_mysql_commands_counters | 93 | stats_mysql_connection_pool | 94 | stats_mysql_connection_pool_reset | 95 | stats_mysql_global | 96 | stats_mysql_prepared_statements_info | 97 | stats_mysql_processlist | 98 | stats_mysql_query_digest | 99 | stats_mysql_query_digest_reset | 100 | stats_mysql_query_rules | 101 | stats_mysql_users | 102 | stats_proxysql_servers_checksums | 103 | stats_proxysql_servers_metrics | 104 | stats_proxysql_servers_status | 105 +--------------------------------------+ 106 15 rows in set (0.00 sec) 107 108 (admin@127.0.0.1 6032)[stats]>select hostgroup,schemaname,username,substr(digest_text,120,-120),count_star from stats_mysql_query_digest; 109 +-----------+------------+----------+----------------------------------+------------+ 110 | hostgroup | schemaname | username | substr(digest_text,120,-120) | count_star | 111 +-----------+------------+----------+----------------------------------+------------+ 112 | 20 | zlm | zlm | select * from t1 | 2 | 113 | 20 | zlm | zlm | insert into t1 values(?,?) | 1 | 114 | 20 | zlm | zlm | select USER() | 2 | 115 | 20 | zlm | zlm | show tables | 1 | 116 | 20 | zlm | zlm | select @@version_comment limit ? | 2 | 117 +-----------+------------+----------+----------------------------------+------------+ 118 5 rows in set (0.00 sec) 119 120 //It's due to I've set "default_hostgroup" with "20".Actually it should be set with "10" of writer_hostgroup. 121 122 (admin@127.0.0.1 6032)[stats]>select * from mysql_users; 123 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 124 | username | password | active | use_ssl | default_hostgroup | default_schema | schema_locked | transaction_persistent | fast_forward | backend | frontend | max_connections | 125 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 126 | zlm | zlmzlm | 1 | 0 | 20 | zlm | 0 | 1 | 0 | 1 | 1 | 10000 | 127 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 128 1 row in set (0.00 sec) 129 130 (admin@127.0.0.1 6032)[stats]>update mysql_users set default_hostgroup=10; 131 Query OK, 1 row affected (0.00 sec) 132 133 (admin@127.0.0.1 6032)[stats]>select * from mysql_users; 134 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 135 | username | password | active | use_ssl | default_hostgroup | default_schema | schema_locked | transaction_persistent | fast_forward | backend | frontend | max_connections | 136 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 137 | zlm | zlmzlm | 1 | 0 | 10 | zlm | 0 | 1 | 0 | 1 | 1 | 10000 | 138 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 139 1 row in set (0.00 sec) 140 141 (admin@127.0.0.1 6032)[stats]>load mysql users to runtime;save mysql users to disk; 142 Query OK, 0 rows affected (0.00 sec) 143 144 Query OK, 0 rows affected (0.05 sec) 145 146 (admin@127.0.0.1 6032)[stats]>select * from runtime_mysql_users; 147 +----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 148 | username | password | active | use_ssl | default_hostgroup | default_schema | schema_locked | transaction_persistent | fast_forward | backend | frontend | max_connections | 149 +----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 150 | zlm | *512FB3FAA6F522E351929CAC70AD8EBB0F5901B6 | 1 | 0 | 10 | zlm | 0 | 1 | 0 | 0 | 1 | 10000 | 151 | zlm | *512FB3FAA6F522E351929CAC70AD8EBB0F5901B6 | 1 | 0 | 10 | zlm | 0 | 1 | 0 | 1 | 0 | 10000 | 152 +----------+-------------------------------------------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 153 2 rows in set (0.00 sec) 154 155 (admin@127.0.0.1 6032)[stats]>select * from disk.mysql_users; 156 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 157 | username | password | active | use_ssl | default_hostgroup | default_schema | schema_locked | transaction_persistent | fast_forward | backend | frontend | max_connections | 158 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 159 | zlm | zlmzlm | 1 | 0 | 10 | zlm | 0 | 1 | 0 | 1 | 1 | 10000 | 160 +----------+----------+--------+---------+-------------------+----------------+---------------+------------------------+--------------+---------+----------+-----------------+ 161 1 row in set (0.00 sec) 162 163 //Clear the statistic data of table "stats_mysql_query_digest". 164 (admin@127.0.0.1 6032)[stats]>select * from stats_mysql_query_digest_reset; 165 +-----------+------------+----------+--------------------+----------------------------------+------------+------------+------------+----------+----------+----------+ 166 | hostgroup | schemaname | username | digest | digest_text | count_star | first_seen | last_seen | sum_time | min_time | max_time | 167 +-----------+------------+----------+--------------------+----------------------------------+------------+------------+------------+----------+----------+----------+ 168 | 20 | zlm | zlm | 0x3765930C7143F468 | select * from t1 | 2 | 1533892415 | 1533892545 | 828 | 204 | 624 | 169 | 20 | zlm | zlm | 0x3CE4C46484576DFD | insert into t1 values(?,?) | 1 | 1533892538 | 1533892538 | 13359 | 13359 | 13359 | 170 | 20 | zlm | zlm | 0x594F2C744B698066 | select USER() | 2 | 1533892377 | 1533892397 | 0 | 0 | 0 | 171 | 20 | zlm | zlm | 0x99531AEFF718C501 | show tables | 1 | 1533892400 | 1533892400 | 2607 | 2607 | 2607 | 172 | 20 | zlm | zlm | 0x226CD90D52A2BA0B | select @@version_comment limit ? | 2 | 1533892377 | 1533892397 | 0 | 0 | 0 | 173 +-----------+------------+----------+--------------------+----------------------------------+------------+------------+------------+----------+----------+----------+ 174 5 rows in set (0.01 sec) 175 176 (admin@127.0.0.1 6032)[stats]>select * from stats_mysql_query_digest; 177 Empty set (0.00 sec) 178 179 //Do the dml operations again. 180 (zlm@192.168.1.101 6033)[(none)]>show tables; 181 +---------------+ 182 | Tables_in_zlm | 183 +---------------+ 184 | t1 | 185 | t2 | 186 +---------------+ 187 2 rows in set (0.00 sec) 188 189 (zlm@192.168.1.101 6033)[(none)]>select * from t2; 190 +----+------------+ 191 | id | name | 192 +----+------------+ 193 | 1 | MySQL | 194 | 2 | Oracle | 195 | 3 | SQL Server | 196 | 4 | Redis | 197 | 5 | MongoDB | 198 | 6 | PostgreSQL | 199 +----+------------+ 200 6 rows in set (0.01 sec) 201 202 (zlm@192.168.1.101 6033)[(none)]>insert into t2 values(7,'Hadoop'); 203 Query OK, 1 row affected (0.01 sec) 204 205 //Check the diagnostic data in table "stats_mysql_query_digest" again. 206 (admin@127.0.0.1 6032)[stats]>select active,username,match_pattern,schemaname,destination_hostgroup,apply from mysql_query_rules; 207 +--------+----------+---------------+------------+-----------------------+-------+ 208 | active | username | match_pattern | schemaname | destination_hostgroup | apply | 209 +--------+----------+---------------+------------+-----------------------+-------+ 210 | 1 | zlm | ^select | zlm | 20 | 1 | 211 +--------+----------+---------------+------------+-----------------------+-------+ 212 1 row in set (0.00 sec) 213 214 (admin@127.0.0.1 6032)[stats]>select hostgroup,schemaname,username,substr(digest_text,120,-120),count_star from stats_mysql_query_digest; 215 +-----------+------------+----------+------------------------------+------------+ 216 | hostgroup | schemaname | username | substr(digest_text,120,-120) | count_star | 217 +-----------+------------+----------+------------------------------+------------+ 218 | 20 | zlm | zlm | insert into t2 values(?,?) | 1 | 219 | 20 | zlm | zlm | select * from t2 | 1 | 220 | 20 | zlm | zlm | show tables | 1 | 221 +-----------+------------+----------+------------------------------+------------+ 222 3 rows in set (0.00 sec) 223 224 //It still doesn't take effect.What's wrong with it?
版权声明：本文为博主原创文章，如需转载请保留此声明及博客链接，谢谢！
博客地址： http://www.cnblogs.com/aaron8219 & http://blog.csdn.net/aaron8219
博客地址： http://www.cnblogs.com/aaron8219 & http://blog.csdn.net/aaron8219
