RocketMQ中NameServer的启动源码分析

在RocketMQ中,使用NamesrvStartup作为启动类

 

主函数作为其启动的入口:

1 public static void main(String[] args) {
2     main0(args);
3 }


main0方法:

 1 public static NamesrvController main0(String[] args) {
 2     try {
 3         NamesrvController controller = createNamesrvController(args);
 4         start(controller);
 5         String tip = "The Name Server boot success. serializeType=" + RemotingCommand.getSerializeTypeConfigInThisServer();
 6         log.info(tip);
 7         System.out.printf("%s%n", tip);
 8         return controller;
 9     } catch (Throwable e) {
10         e.printStackTrace();
11         System.exit(-1);
12     }
13 
14     return null;
15 }


首先通过createNamesrvController方法生成NameServer的控制器NamesrvController

createNamesrvController方法:

 1 public static NamesrvController createNamesrvController(String[] args) throws IOException, JoranException {
 2     System.setProperty(RemotingCommand.REMOTING_VERSION_KEY, Integer.toString(MQVersion.CURRENT_VERSION));
 3     //PackageConflictDetect.detectFastjson();
 4 
 5     Options options = ServerUtil.buildCommandlineOptions(new Options());
 6     commandLine = ServerUtil.parseCmdLine("mqnamesrv", args, buildCommandlineOptions(options), new PosixParser());
 7     if (null == commandLine) {
 8         System.exit(-1);
 9         return null;
10     }
11 
12     final NamesrvConfig namesrvConfig = new NamesrvConfig();
13     final NettyServerConfig nettyServerConfig = new NettyServerConfig();
14     nettyServerConfig.setListenPort(9876);
15     if (commandLine.hasOption('c')) {
16         String file = commandLine.getOptionValue('c');
17         if (file != null) {
18             InputStream in = new BufferedInputStream(new FileInputStream(file));
19             properties = new Properties();
20             properties.load(in);
21             MixAll.properties2Object(properties, namesrvConfig);
22             MixAll.properties2Object(properties, nettyServerConfig);
23 
24             namesrvConfig.setConfigStorePath(file);
25 
26             System.out.printf("load config properties file OK, %s%n", file);
27             in.close();
28         }
29     }
30 
31     if (commandLine.hasOption('p')) {
32         InternalLogger console = InternalLoggerFactory.getLogger(LoggerName.NAMESRV_CONSOLE_NAME);
33         MixAll.printObjectProperties(console, namesrvConfig);
34         MixAll.printObjectProperties(console, nettyServerConfig);
35         System.exit(0);
36     }
37 
38     MixAll.properties2Object(ServerUtil.commandLine2Properties(commandLine), namesrvConfig);
39 
40     if (null == namesrvConfig.getRocketmqHome()) {
41         System.out.printf("Please set the %s variable in your environment to match the location of the RocketMQ installation%n", MixAll.ROCKETMQ_HOME_ENV);
42         System.exit(-2);
43     }
44 
45     LoggerContext lc = (LoggerContext) LoggerFactory.getILoggerFactory();
46     JoranConfigurator configurator = new JoranConfigurator();
47     configurator.setContext(lc);
48     lc.reset();
49     configurator.doConfigure(namesrvConfig.getRocketmqHome() + "/conf/logback_namesrv.xml");
50 
51     log = InternalLoggerFactory.getLogger(LoggerName.NAMESRV_LOGGER_NAME);
52 
53     MixAll.printObjectProperties(log, namesrvConfig);
54     MixAll.printObjectProperties(log, nettyServerConfig);
55 
56     final NamesrvController controller = new NamesrvController(namesrvConfig, nettyServerConfig);
57 
58     // remember all configs to prevent discard
59     controller.getConfiguration().registerConfig(properties);
60 
61     return controller;
62 }

这里创建了两个实体类NamesrvConfig和NettyServerConfig
这两个实体类对应了其配置文件中的配置


NamesrvConfig:

1 private String rocketmqHome = System.getProperty(MixAll.ROCKETMQ_HOME_PROPERTY, System.getenv(MixAll.ROCKETMQ_HOME_ENV));
2 private String kvConfigPath = System.getProperty("user.home") + File.separator + "namesrv" + File.separator + "kvConfig.json";
3 private String configStorePath = System.getProperty("user.home") + File.separator + "namesrv" + File.separator + "namesrv.properties";
4 private String productEnvName = "center";
5 private boolean clusterTest = false;
6 private boolean orderMessageEnable = false;


NettyServerConfig:

 1 private int listenPort = 8888;
 2 private int serverWorkerThreads = 8;
 3 private int serverCallbackExecutorThreads = 0;
 4 private int serverSelectorThreads = 3;
 5 private int serverOnewaySemaphoreValue = 256;
 6 private int serverAsyncSemaphoreValue = 64;
 7 private int serverChannelMaxIdleTimeSeconds = 120;
 8 
 9 private int serverSocketSndBufSize = NettySystemConfig.socketSndbufSize // 65535;
10 private int serverSocketRcvBufSize = NettySystemConfig.socketRcvbufSize // 65535;
11 private boolean serverPooledByteBufAllocatorEnable = true;


对应如下配置文件:

##
# 名称:NamesrvConfig.rocketmqHome <String>
# 默认值:(通过 sh mqnamesrv 设置 ROCKETMQ_HOME 环境变量,在源程序中获取环境变量得
#        到的目录)
# 描述:RocketMQ 主目录 
# 建议:不主动配置
##
rocketmqHome = /usr/rocketmq

##
# 名称:NamesrvConfig.kvConfigPath <String>
# 默认值:$user.home/namesrv/kvConfig.json <在源程序中获取用户环境变量后生成>
# 描述:kv 配置文件路径,包含顺序消息主题的配置信息 
# 建议:启用顺序消息时配置
##
kvConfigPath = /root/namesrv/kvConfig.json

##
# 名称:NamesrvConfig.configStorePath <String>
# 默认值:$user.home/namesrv/namesrv.properties <在源程序中获取用户环境变量后生成>
# 描述:NameServer 配置文件路径
# 建议:启动时通过 -c 指定
##
configStorePath = /root/namesrv/namesrv.properties

##
# 名称:NamesrvConfig.clusterTest <boolean>
# 默认值:false <在源程序中初始化字段时指定>
# 描述:是否开启集群测试
# 建议:不主动配置
##
clusterTest = false

##
# 名称:NamesrvConfig.orderMessageEnable <boolean>
# 默认值:false <在源程序中初始化字段时指定>
# 描述:是否支持顺序消息
# 建议:启用顺序消息时配置
##
orderMessageEnable = false

##
# 名称:NettyServerConfig.listenPort <int>
# 默认值:9876 <在源程序中初始化后单独设置>
# 描述:服务端监听端口
# 建议:不主动配置
##
listenPort = 9876

##
# 名称:NettyServerConfig.serverWorkerThreads <int>
# 默认值:8 <在源程序中初始化字段时指定>
# 描述:Netty 业务线程池线程个数
# 建议:不主动配置
##
serverWorkerThreads = 8

##
# 名称:NettyServerConfig.serverCallbackExecutorThreads <int>
# 默认值:0 <在源程序中初始化字段时指定>
# 描述:Netty public 任务线程池线程个数,Netty 网络设计,根据业务类型会创建不同的线程池,比如处理发送消息、消息消费、心跳检测等。如果该业务类型(RequestCode)未注册线程池,则由 public 线程池执行
# 建议:
##
serverCallbackExecutorThreads = 0

##
# 名称:NettyServerConfig.serverSelectorThreads <int>
# 默认值:3 <在源程序中初始化字段时指定>
# 描述:IO 线程池线程个数,主要是 NameServer、Broker 端解析请求、返回响应的线程个数,这类线程池主要是处理网络请求的,解析请求包,然后转发到各个业务线程池完成具体的业务操作,然后将结果再返回调用方
# 建议:不主动配置
##
serverSelectorThreads = 3

##
# 名称:NettyServerConfig.serverOnewaySemaphoreValue <int>
# 默认值:256 <在源程序中初始化字段时指定>
# 描述:send oneway 消息请求并发度
# 建议:不主动配置
##
serverOnewaySemaphoreValue = 256

##
# 名称:NettyServerConfig.serverAsyncSemaphoreValue <int>
# 默认值:64 <在源程序中初始化字段时指定>
# 描述:异步消息发送最大并发度
# 建议:不主动配置
##
serverAsyncSemaphoreValue = 64

##
# 名称:NettyServerConfig.serverChannelMaxIdleTimeSeconds <int>
# 默认值:120 <在源程序中初始化字段时指定>
# 描述:网络连接最大空闲时间,单位秒,如果连接空闲时间超过该参数设置的值,连接将被关闭
# 建议:不主动配置
##
serverChannelMaxIdleTimeSeconds = 120

##
# 名称:NettyServerConfig.serverSocketSndBufSize <int>
# 默认值:65535 <在源程序中初始化字段时指定>
# 描述:网络 socket 发送缓存区大小,单位 B,即默认为 64KB
# 建议:不主动配置
##
serverSocketSndBufSize = 65535

##
# 名称:NettyServerConfig.serverSocketRcvBufSize <int>
# 默认值:65535 <在源程序中初始化字段时指定>
# 描述:网络 socket 接收缓存区大小,单位 B,即默认为 64KB
# 建议:不主动配置
##
serverSocketRcvBufSize = 65535

##
# 名称:NettyServerConfig.serverPooledByteBufAllocatorEnable <int>
# 默认值:true <在源程序中初始化字段时指定>
# 描述:ByteBuffer 是否开启缓存,建议开启
# 建议:不主动配置
##
serverPooledByteBufAllocatorEnable = true

##
# 名称:NettyServerConfig.useEpollNativeSelector <int>
# 默认值:false <在源程序中初始化字段时指定>
# 描述:是否启用 Epoll IO 模型
# 建议:Linux 环境开启
##
useEpollNativeSelector = true


接下来是对‘-c’命令下配置文件的加载,以及‘-p’命令下namesrvConfig和nettyServerConfig属性的打印
后续是对日志的一系列配置

在完成这些后,会根据namesrvConfig和nettyServerConfig创建NamesrvController实例

NamesrvController:

 1 public NamesrvController(NamesrvConfig namesrvConfig, NettyServerConfig nettyServerConfig) {
 2     this.namesrvConfig = namesrvConfig;
 3     this.nettyServerConfig = nettyServerConfig;
 4     this.kvConfigManager = new KVConfigManager(this);
 5     this.routeInfoManager = new RouteInfoManager();
 6     this.brokerHousekeepingService = new BrokerHousekeepingService(this);
 7     this.configuration = new Configuration(
 8         log,
 9         this.namesrvConfig, this.nettyServerConfig
10     );
11     this.configuration.setStorePathFromConfig(this.namesrvConfig, "configStorePath");
12 }

可以看到这里创建了一个KVConfigManager和一个RouteInfoManager

 

KVConfigManager:

 1 public class KVConfigManager {
 2     private final NamesrvController namesrvController;
 3     private final HashMap<String/* Namespace */, HashMap<String/* Key */, String/* Value */>> configTable =
 4             new HashMap<String, HashMap<String, String>>();
 5             
 6     public KVConfigManager(NamesrvController namesrvController) {
 7             this.namesrvController = namesrvController;
 8     }
 9     ......
10 }

KVConfigManager通过建立configTable管理KV


RouteInfoManager:

 1 public class RouteInfoManager {
 2     private final HashMap<String/* topic */, List<QueueData>> topicQueueTable;
 3     private final HashMap<String/* brokerName */, BrokerData> brokerAddrTable;
 4     private final HashMap<String/* clusterName */, Set<String/* brokerName */>> clusterAddrTable;
 5     private final HashMap<String/* brokerAddr */, BrokerLiveInfo> brokerLiveTable;
 6     private final HashMap<String/* brokerAddr */, List<String>/* Filter Server */> filterServerTable;
 7     private final static long BROKER_CHANNEL_EXPIRED_TIME = 1000 * 60 * 2;
 8 
 9     public RouteInfoManager() {
10     this.topicQueueTable = new HashMap<String, List<QueueData>>(1024);
11     this.brokerAddrTable = new HashMap<String, BrokerData>(128);
12     this.clusterAddrTable = new HashMap<String, Set<String>>(32);
13     this.brokerLiveTable = new HashMap<String, BrokerLiveInfo>(256);
14     this.filterServerTable = new HashMap<String, List<String>>(256);
15     }
16     ......
17 }

RouteInfoManager则记录了这些路由信息,其中BROKER_CHANNEL_EXPIRED_TIME 表示允许的不活跃的Broker存活时间


在NamesrvController中还创建了一个BrokerHousekeepingService:

 1 public class BrokerHousekeepingService implements ChannelEventListener {
 2     private static final InternalLogger log = InternalLoggerFactory.getLogger(LoggerName.NAMESRV_LOGGER_NAME);
 3     private final NamesrvController namesrvController;
 4 
 5     public BrokerHousekeepingService(NamesrvController namesrvController) {
 6         this.namesrvController = namesrvController;
 7     }
 8 
 9     @Override
10     public void onChannelConnect(String remoteAddr, Channel channel) {
11     }
12 
13     @Override
14     public void onChannelClose(String remoteAddr, Channel channel) {
15         this.namesrvController.getRouteInfoManager().onChannelDestroy(remoteAddr, channel);
16     }
17 
18     @Override
19     public void onChannelException(String remoteAddr, Channel channel) {
20         this.namesrvController.getRouteInfoManager().onChannelDestroy(remoteAddr, channel);
21     }
22 
23     @Override
24     public void onChannelIdle(String remoteAddr, Channel channel) {
25         this.namesrvController.getRouteInfoManager().onChannelDestroy(remoteAddr, channel);
26     }
27 }

可以看到这是一个ChannelEventListener,用来处理Netty的中的异步事件监听


在创建完NamesrvController后,回到main0,调用start方法,真正开启NameServer服务

start方法:

 1 public static NamesrvController start(final NamesrvController controller) throws Exception {
 2     if (null == controller) {
 3         throw new IllegalArgumentException("NamesrvController is null");
 4     }
 5 
 6     boolean initResult = controller.initialize();
 7     if (!initResult) {
 8         controller.shutdown();
 9         System.exit(-3);
10     }
11 
12     Runtime.getRuntime().addShutdownHook(new ShutdownHookThread(log, new Callable<Void>() {
13         @Override
14         public Void call() throws Exception {
15             controller.shutdown();
16             return null;
17         }
18     }));
19 
20     controller.start();
21 
22     return controller;
23 }

 

首先调用NamesrvController的initialize方法:

 1 public boolean initialize() {
 2     this.kvConfigManager.load();
 3 
 4     this.remotingServer = new NettyRemotingServer(this.nettyServerConfig, this.brokerHousekeepingService);
 5 
 6     this.remotingExecutor =
 7         Executors.newFixedThreadPool(nettyServerConfig.getServerWorkerThreads(), new ThreadFactoryImpl("RemotingExecutorThread_"));
 8 
 9     this.registerProcessor();
10 
11     this.scheduledExecutorService.scheduleAtFixedRate(new Runnable() {
12 
13         @Override
14         public void run() {
15             NamesrvController.this.routeInfoManager.scanNotActiveBroker();
16         }
17     }, 5, 10, TimeUnit.SECONDS);
18 
19     this.scheduledExecutorService.scheduleAtFixedRate(new Runnable() {
20 
21         @Override
22         public void run() {
23             NamesrvController.this.kvConfigManager.printAllPeriodically();
24         }
25     }, 1, 10, TimeUnit.MINUTES);
26 
27     if (TlsSystemConfig.tlsMode != TlsMode.DISABLED) {
28         // Register a listener to reload SslContext
29         try {
30             fileWatchService = new FileWatchService(
31                 new String[] {
32                     TlsSystemConfig.tlsServerCertPath,
33                     TlsSystemConfig.tlsServerKeyPath,
34                     TlsSystemConfig.tlsServerTrustCertPath
35                 },
36                 new FileWatchService.Listener() {
37                     boolean certChanged, keyChanged = false;
38                     @Override
39                     public void onChanged(String path) {
40                         if (path.equals(TlsSystemConfig.tlsServerTrustCertPath)) {
41                             log.info("The trust certificate changed, reload the ssl context");
42                             reloadServerSslContext();
43                         }
44                         if (path.equals(TlsSystemConfig.tlsServerCertPath)) {
45                             certChanged = true;
46                         }
47                         if (path.equals(TlsSystemConfig.tlsServerKeyPath)) {
48                             keyChanged = true;
49                         }
50                         if (certChanged && keyChanged) {
51                             log.info("The certificate and private key changed, reload the ssl context");
52                             certChanged = keyChanged = false;
53                             reloadServerSslContext();
54                         }
55                     }
56                     private void reloadServerSslContext() {
57                         ((NettyRemotingServer) remotingServer).loadSslContext();
58                     }
59                 });
60         } catch (Exception e) {
61             log.warn("FileWatchService created error, can't load the certificate dynamically");
62         }
63     }
64 
65     return true;
66 }

先通过kvConfigManager的load方法,向KVConfigManager中的map加载之前配置好的KV文件路径下的键值对

 1 public void load() {
 2     String content = null;
 3     try {
 4         content = MixAll.file2String(this.namesrvController.getNamesrvConfig().getKvConfigPath());
 5     } catch (IOException e) {
 6         log.warn("Load KV config table exception", e);
 7     }
 8     if (content != null) {
 9         KVConfigSerializeWrapper kvConfigSerializeWrapper =
10             KVConfigSerializeWrapper.fromJson(content, KVConfigSerializeWrapper.class);
11         if (null != kvConfigSerializeWrapper) {
12             this.configTable.putAll(kvConfigSerializeWrapper.getConfigTable());
13             log.info("load KV config table OK");
14         }
15     }
16 }

方法比较简单,将JSON形式的KV文件包装成KVConfigSerializeWrapper,通过getConfigTable方法转换成map放在configTable中

 

完成KV加载后,建立了一个NettyRemotingServer,即Netty服务器

 1 public NettyRemotingServer(final NettyServerConfig nettyServerConfig,
 2         final ChannelEventListener channelEventListener) {
 3     super(nettyServerConfig.getServerOnewaySemaphoreValue(), nettyServerConfig.getServerAsyncSemaphoreValue());
 4     this.serverBootstrap = new ServerBootstrap();
 5     this.nettyServerConfig = nettyServerConfig;
 6     this.channelEventListener = channelEventListener;
 7 
 8     int publicThreadNums = nettyServerConfig.getServerCallbackExecutorThreads();
 9     if (publicThreadNums <= 0) {
10         publicThreadNums = 4;
11     }
12 
13     this.publicExecutor = Executors.newFixedThreadPool(publicThreadNums, new ThreadFactory() {
14         private AtomicInteger threadIndex = new AtomicInteger(0);
15 
16         @Override
17         public Thread newThread(Runnable r) {
18             return new Thread(r, "NettyServerPublicExecutor_" + this.threadIndex.incrementAndGet());
19         }
20     });
21 
22     if (useEpoll()) {
23         this.eventLoopGroupBoss = new EpollEventLoopGroup(1, new ThreadFactory() {
24             private AtomicInteger threadIndex = new AtomicInteger(0);
25 
26             @Override
27             public Thread newThread(Runnable r) {
28                 return new Thread(r, String.format("NettyEPOLLBoss_%d", this.threadIndex.incrementAndGet()));
29             }
30         });
31 
32         this.eventLoopGroupSelector = new EpollEventLoopGroup(nettyServerConfig.getServerSelectorThreads(), new ThreadFactory() {
33             private AtomicInteger threadIndex = new AtomicInteger(0);
34             private int threadTotal = nettyServerConfig.getServerSelectorThreads();
35 
36             @Override
37             public Thread newThread(Runnable r) {
38                 return new Thread(r, String.format("NettyServerEPOLLSelector_%d_%d", threadTotal, this.threadIndex.incrementAndGet()));
39             }
40         });
41     } else {
42         this.eventLoopGroupBoss = new NioEventLoopGroup(1, new ThreadFactory() {
43             private AtomicInteger threadIndex = new AtomicInteger(0);
44 
45             @Override
46             public Thread newThread(Runnable r) {
47                 return new Thread(r, String.format("NettyNIOBoss_%d", this.threadIndex.incrementAndGet()));
48             }
49         });
50 
51         this.eventLoopGroupSelector = new NioEventLoopGroup(nettyServerConfig.getServerSelectorThreads(), new ThreadFactory() {
52             private AtomicInteger threadIndex = new AtomicInteger(0);
53             private int threadTotal = nettyServerConfig.getServerSelectorThreads();
54 
55             @Override
56             public Thread newThread(Runnable r) {
57                 return new Thread(r, String.format("NettyServerNIOSelector_%d_%d", threadTotal, this.threadIndex.incrementAndGet()));
58             }
59         });
60     }
61 
62     loadSslContext();
63 }

这里创建了ServerBootstrap
channelEventListener就是刚才创建的BrokerHousekeepingService

然后根据是否使用epoll,选择创建两个合适的EventLoopGroup

创建完成后,通过loadSslContext完成对SSL和TLS的设置

 

回到initialize方法,在创建完Netty的服务端后,调用registerProcessor方法:

 1 private void registerProcessor() {
 2     if (namesrvConfig.isClusterTest()) {
 3 
 4         this.remotingServer.registerDefaultProcessor(new ClusterTestRequestProcessor(this, namesrvConfig.getProductEnvName()),
 5             this.remotingExecutor);
 6     } else {
 7 
 8         this.remotingServer.registerDefaultProcessor(new DefaultRequestProcessor(this), this.remotingExecutor);
 9     }
10 }

这里和是否设置了clusterTest集群测试有关,默认关闭

 

在默认情况下创建了DefaultRequestProcessor,这个类很重要,后面会详细说明,然后通过remotingServer的registerDefaultProcessor方法,将DefaultRequestProcessor注册给Netty服务器:

1 public void registerDefaultProcessor(NettyRequestProcessor processor, ExecutorService executor) {
2     this.defaultRequestProcessor = new Pair<NettyRequestProcessor, ExecutorService>(processor, executor);
3 }

 

在做完这些后,提交了两个定时任务
①定时清除不活跃的Broker
RouteInfoManager的scanNotActiveBroker方法:

 1 public void scanNotActiveBroker() {
 2     Iterator<Entry<String, BrokerLiveInfo>> it = this.brokerLiveTable.entrySet().iterator();
 3     while (it.hasNext()) {
 4         Entry<String, BrokerLiveInfo> next = it.next();
 5         long last = next.getValue().getLastUpdateTimestamp();
 6         if ((last + BROKER_CHANNEL_EXPIRED_TIME) < System.currentTimeMillis()) {
 7             RemotingUtil.closeChannel(next.getValue().getChannel());
 8             it.remove();
 9             log.warn("The broker channel expired, {} {}ms", next.getKey(), BROKER_CHANNEL_EXPIRED_TIME);
10             this.onChannelDestroy(next.getKey(), next.getValue().getChannel());
11         }
12     }
13 }

这里比较简单,在之前RouteInfoManager中创建的brokerLiveTable表中遍历所有BrokerLiveInfo,找到超出规定时间BROKER_CHANNEL_EXPIRED_TIME的BrokerLiveInfo信息进行删除,同时关闭Channel
而onChannelDestroy方法,会对其他几张表进行相关联的删除工作,代码重复量大就不细说了

 

BrokerLiveInfo记录了Broker的活跃度信息:

1 private long lastUpdateTimestamp;
2 private DataVersion dataVersion;
3 private Channel channel;
4 private String haServerAddr;

lastUpdateTimestamp记录上一次更新时间戳,是其活跃性的关键

 

②定时完成configTable的日志记录
KVConfigManager的printAllPeriodically方法:

 1 public void printAllPeriodically() {
 2     try {
 3         this.lock.readLock().lockInterruptibly();
 4         try {
 5             log.info("--------------------------------------------------------");
 6 
 7             {
 8                 log.info("configTable SIZE: {}", this.configTable.size());
 9                 Iterator<Entry<String, HashMap<String, String>>> it =
10                     this.configTable.entrySet().iterator();
11                 while (it.hasNext()) {
12                     Entry<String, HashMap<String, String>> next = it.next();
13                     Iterator<Entry<String, String>> itSub = next.getValue().entrySet().iterator();
14                     while (itSub.hasNext()) {
15                         Entry<String, String> nextSub = itSub.next();
16                         log.info("configTable NS: {} Key: {} Value: {}", next.getKey(), nextSub.getKey(),
17                             nextSub.getValue());
18                     }
19                 }
20             }
21         } finally {
22             this.lock.readLock().unlock();
23         }
24     } catch (InterruptedException e) {
25         log.error("printAllPeriodically InterruptedException", e);
26     }
27 }

很简单,根据configTable表的内容,完成KV的日志记录

 

在创建完这两个定时任务后会注册一个侦听器,以便完成SslContext的重新加载


initialize随之结束,之后是对关闭事件的处理

 

最后调用NamesrvController的start,此时才是真正的开启物理上的服务
NamesrvController的start方法:

1 public void start() throws Exception {
2     this.remotingServer.start();
3 
4     if (this.fileWatchService != null) {
5         this.fileWatchService.start();
6     }
7 }

这里实际上就是开启的Netty服务端

 

NettyRemotingServer的start方法:

 1 public void start() {
 2     this.defaultEventExecutorGroup = new DefaultEventExecutorGroup(
 3         nettyServerConfig.getServerWorkerThreads(),
 4         new ThreadFactory() {
 5 
 6             private AtomicInteger threadIndex = new AtomicInteger(0);
 7 
 8             @Override
 9             public Thread newThread(Runnable r) {
10                 return new Thread(r, "NettyServerCodecThread_" + this.threadIndex.incrementAndGet());
11             }
12         });
13 
14     ServerBootstrap childHandler =
15         this.serverBootstrap.group(this.eventLoopGroupBoss, this.eventLoopGroupSelector)
16             .channel(useEpoll() ? EpollServerSocketChannel.class : NioServerSocketChannel.class)
17             .option(ChannelOption.SO_BACKLOG, 1024)
18             .option(ChannelOption.SO_REUSEADDR, true)
19             .option(ChannelOption.SO_KEEPALIVE, false)
20             .childOption(ChannelOption.TCP_NODELAY, true)
21             .childOption(ChannelOption.SO_SNDBUF, nettyServerConfig.getServerSocketSndBufSize())
22             .childOption(ChannelOption.SO_RCVBUF, nettyServerConfig.getServerSocketRcvBufSize())
23             .localAddress(new InetSocketAddress(this.nettyServerConfig.getListenPort()))
24             .childHandler(new ChannelInitializer<SocketChannel>() {
25                 @Override
26                 public void initChannel(SocketChannel ch) throws Exception {
27                     ch.pipeline()
28                         .addLast(defaultEventExecutorGroup, HANDSHAKE_HANDLER_NAME,
29                             new HandshakeHandler(TlsSystemConfig.tlsMode))
30                         .addLast(defaultEventExecutorGroup,
31                             new NettyEncoder(),
32                             new NettyDecoder(),
33                             new IdleStateHandler(0, 0, nettyServerConfig.getServerChannelMaxIdleTimeSeconds()),
34                             new NettyConnectManageHandler(),
35                             new NettyServerHandler()
36                         );
37                 }
38             });
39 
40     if (nettyServerConfig.isServerPooledByteBufAllocatorEnable()) {
41         childHandler.childOption(ChannelOption.ALLOCATOR, PooledByteBufAllocator.DEFAULT);
42     }
43 
44     try {
45         ChannelFuture sync = this.serverBootstrap.bind().sync();
46         InetSocketAddress addr = (InetSocketAddress) sync.channel().localAddress();
47         this.port = addr.getPort();
48     } catch (InterruptedException e1) {
49         throw new RuntimeException("this.serverBootstrap.bind().sync() InterruptedException", e1);
50     }
51 
52     if (this.channelEventListener != null) {
53         this.nettyEventExecutor.start();
54     }
55 
56     this.timer.scheduleAtFixedRate(new TimerTask() {
57 
58         @Override
59         public void run() {
60             try {
61                 NettyRemotingServer.this.scanResponseTable();
62             } catch (Throwable e) {
63                 log.error("scanResponseTable exception", e);
64             }
65         }
66     }, 1000 * 3, 1000);
67 }

可以看到也就是正常的Netty服务端启动流程

 

关键在于在childHandler的绑定中,可以看到向pipeline绑定了一个NettyServerHandler:

1 class NettyServerHandler extends SimpleChannelInboundHandler<RemotingCommand> {
2 
3     @Override
4     protected void channelRead0(ChannelHandlerContext ctx, RemotingCommand msg) throws Exception {
5         processMessageReceived(ctx, msg);
6     }
7 }

那么当客户端和NameServre端建立连接后,之间传输的消息会通过processMessageReceived方法进行处理


processMessageReceived方法:

 1 public void processMessageReceived(ChannelHandlerContext ctx, RemotingCommand msg) throws Exception {
 2        final RemotingCommand cmd = msg;
 3    if (cmd != null) {
 4         switch (cmd.getType()) {
 5             case REQUEST_COMMAND:
 6                 processRequestCommand(ctx, cmd);
 7                 break;
 8             case RESPONSE_COMMAND:
 9                 processResponseCommand(ctx, cmd);
10                 break;
11             default:
12                 break;
13         }
14     }
15 }

根据消息类型(请求消息、响应消息),使用不同的处理


processRequestCommand方法:

 1 public void processRequestCommand(final ChannelHandlerContext ctx, final RemotingCommand cmd) {
 2     final Pair<NettyRequestProcessor, ExecutorService> matched = this.processorTable.get(cmd.getCode());
 3     final Pair<NettyRequestProcessor, ExecutorService> pair = null == matched ? this.defaultRequestProcessor : matched;
 4     final int opaque = cmd.getOpaque();
 5 
 6     if (pair != null) {
 7         Runnable run = new Runnable() {
 8             @Override
 9             public void run() {
10                 try {
11                     doBeforeRpcHooks(RemotingHelper.parseChannelRemoteAddr(ctx.channel()), cmd);
12                     final RemotingCommand response = pair.getObject1().processRequest(ctx, cmd);
13                     doAfterRpcHooks(RemotingHelper.parseChannelRemoteAddr(ctx.channel()), cmd, response);
14 
15                     if (!cmd.isOnewayRPC()) {
16                         if (response != null) {
17                             response.setOpaque(opaque);
18                             response.markResponseType();
19                             try {
20                                 ctx.writeAndFlush(response);
21                             } catch (Throwable e) {
22                                 log.error("process request over, but response failed", e);
23                                 log.error(cmd.toString());
24                                 log.error(response.toString());
25                             }
26                         } else {
27 
28                         }
29                     }
30                 } catch (Throwable e) {
31                     log.error("process request exception", e);
32                     log.error(cmd.toString());
33 
34                     if (!cmd.isOnewayRPC()) {
35                         final RemotingCommand response = RemotingCommand.createResponseCommand(RemotingSysResponseCode.SYSTEM_ERROR,
36                             RemotingHelper.exceptionSimpleDesc(e));
37                         response.setOpaque(opaque);
38                         ctx.writeAndFlush(response);
39                     }
40                 }
41             }
42         };
43 
44         if (pair.getObject1().rejectRequest()) {
45             final RemotingCommand response = RemotingCommand.createResponseCommand(RemotingSysResponseCode.SYSTEM_BUSY,
46                 "[REJECTREQUEST]system busy, start flow control for a while");
47             response.setOpaque(opaque);
48             ctx.writeAndFlush(response);
49             return;
50         }
51 
52         try {
53             final RequestTask requestTask = new RequestTask(run, ctx.channel(), cmd);
54             pair.getObject2().submit(requestTask);
55         } catch (RejectedExecutionException e) {
56             if ((System.currentTimeMillis() % 10000) == 0) {
57                 log.warn(RemotingHelper.parseChannelRemoteAddr(ctx.channel())
58                     + ", too many requests and system thread pool busy, RejectedExecutionException "
59                     + pair.getObject2().toString()
60                     + " request code: " + cmd.getCode());
61             }
62 
63             if (!cmd.isOnewayRPC()) {
64                 final RemotingCommand response = RemotingCommand.createResponseCommand(RemotingSysResponseCode.SYSTEM_BUSY,
65                     "[OVERLOAD]system busy, start flow control for a while");
66                 response.setOpaque(opaque);
67                 ctx.writeAndFlush(response);
68             }
69         }
70     } else {
71         String error = " request type " + cmd.getCode() + " not supported";
72         final RemotingCommand response =
73             RemotingCommand.createResponseCommand(RemotingSysResponseCode.REQUEST_CODE_NOT_SUPPORTED, error);
74         response.setOpaque(opaque);
75         ctx.writeAndFlush(response);
76         log.error(RemotingHelper.parseChannelRemoteAddr(ctx.channel()) + error);
77     }
78 }

在这里创建了一个Runnable提交给线程池,这个Runnable的核心是

1 final RemotingCommand response = pair.getObject1().processRequest(ctx, cmd);


实际上调用的就是前面说过的DefaultRequestProcessor的processRequest方法:

 1 public RemotingCommand processRequest(ChannelHandlerContext ctx,
 2    RemotingCommand request) throws RemotingCommandException {
 3 
 4     if (ctx != null) {
 5         log.debug("receive request, {} {} {}",
 6             request.getCode(),
 7             RemotingHelper.parseChannelRemoteAddr(ctx.channel()),
 8             request);
 9     }
10 
11 
12     switch (request.getCode()) {
13         case RequestCode.PUT_KV_CONFIG:
14             return this.putKVConfig(ctx, request);
15         case RequestCode.GET_KV_CONFIG:
16             return this.getKVConfig(ctx, request);
17         case RequestCode.DELETE_KV_CONFIG:
18             return this.deleteKVConfig(ctx, request);
19         case RequestCode.QUERY_DATA_VERSION:
20             return queryBrokerTopicConfig(ctx, request);
21         case RequestCode.REGISTER_BROKER:
22             Version brokerVersion = MQVersion.value2Version(request.getVersion());
23             if (brokerVersion.ordinal() >= MQVersion.Version.V3_0_11.ordinal()) {
24                 return this.registerBrokerWithFilterServer(ctx, request);
25             } else {
26                 return this.registerBroker(ctx, request);
27             }
28         case RequestCode.UNREGISTER_BROKER:
29             return this.unregisterBroker(ctx, request);
30         case RequestCode.GET_ROUTEINTO_BY_TOPIC:
31             return this.getRouteInfoByTopic(ctx, request);
32         case RequestCode.GET_BROKER_CLUSTER_INFO:
33             return this.getBrokerClusterInfo(ctx, request);
34         case RequestCode.WIPE_WRITE_PERM_OF_BROKER:
35             return this.wipeWritePermOfBroker(ctx, request);
36         case RequestCode.GET_ALL_TOPIC_LIST_FROM_NAMESERVER:
37             return getAllTopicListFromNameserver(ctx, request);
38         case RequestCode.DELETE_TOPIC_IN_NAMESRV:
39             return deleteTopicInNamesrv(ctx, request);
40         case RequestCode.GET_KVLIST_BY_NAMESPACE:
41             return this.getKVListByNamespace(ctx, request);
42         case RequestCode.GET_TOPICS_BY_CLUSTER:
43             return this.getTopicsByCluster(ctx, request);
44         case RequestCode.GET_SYSTEM_TOPIC_LIST_FROM_NS:
45             return this.getSystemTopicListFromNs(ctx, request);
46         case RequestCode.GET_UNIT_TOPIC_LIST:
47             return this.getUnitTopicList(ctx, request);
48         case RequestCode.GET_HAS_UNIT_SUB_TOPIC_LIST:
49             return this.getHasUnitSubTopicList(ctx, request);
50         case RequestCode.GET_HAS_UNIT_SUB_UNUNIT_TOPIC_LIST:
51             return this.getHasUnitSubUnUnitTopicList(ctx, request);
52         case RequestCode.UPDATE_NAMESRV_CONFIG:
53             return this.updateConfig(ctx, request);
54         case RequestCode.GET_NAMESRV_CONFIG:
55             return this.getConfig(ctx, request);
56         default:
57             break;
58     }
59     return null;
60 }

这个方法很直观,根据不同的RequestCode,执行不同的方法,其中有熟悉的
REGISTER_BROKER 注册Broker
GET_ROUTEINTO_BY_TOPIC 获取Topic路由信息
而其相对性的方法执行就是通过查阅或者修改之前创建的表来完成
最后将相应的数据包装,在Runnable中通过Netty的writeAndFlush完成发送


至此NameServer的启动结束

posted @ 2019-08-03 01:15  松饼人  阅读(1537)  评论(0编辑  收藏  举报