进程间通信——LINUX
1、编写一段程序，使用系统调用fork( )创建两个子进程，再用系统调用signal( )让父进 程捕捉键盘上来的中断信号（即按ctrl+c键），当捕捉到中断信号后，父进程用系统调用kill( )向两个子进程发出信号，子进程捕捉到信号后，分别输出下列信息后终止：
Child process 1 is killed by parent!
Child process 2 is killed by parent!
父进程等待两个子进程终止后，输出以下信息后终止：
Parent process is killed!
1 #include<stdio.h> 2 #include<signal.h> 3 #include<unistd.h> 4 #include<sys/types.h> 5 #include<sys/wait.h> 6 int wait_mark; 7 void waiting(),stop(); 8 void main() 9 {int p1, p2; 10 signal(SIGINT,stop); 11 while((p1=fork())==-1); 12 if(p1>0) /*在父进程中*/ 13 {① 14 while((p2=fork())==-1); 15 If(p2>0) /*在父进程中*/ 16 { ② 17 wait_mark=1; 18 waiting(0); 19 kill(p1,10); 20 kill(p2,12); 21 wait( ); 22 wait( ); 23 printf("parent process is killed!\n"); 24 exit(0); 25 } 26 else /*在子进程2中*/ 27 { 28 wait_mark=1; 29 signal(12,stop); 30 waiting(); 31 lockf(1,1,0); 32 printf("child process 2 is killed by parent!\n"); 33 lockf(1,0,0); 34 exit(0); 35 } 36 } 37 else /*在子进程1中*/ 38 { 39 wait_mark=1; 40 signal(10,stop); 41 waiting(); 42 lockf(1,1,0); 43 printf("child process 1 is killed by parent!\n"); 44 lockf(1,0,0); 45 exit(0); 46 } 47 } 48 void waiting() 49 { 50 while(wait_mark!=0); 51 } 52 void stop() 53 { 54 wait_mark=0; 55 }
⑴运行程序并分析结果。
^C
child process 2 is killed by parent!
child process 1 is killed by parent!
parent process is killed!
⑵如果把signal(SIGINT,stop)放在①号和②号位置，结果会怎样并分析原因。
1-
^C
child process 2 is killed by parent!
parent process is killed!
2-
^C
parent process is killed!
⑶该程序段前面部分用了两个wait(0),为什么？
关掉后一个wait
^C
child process 1 is killed by parent!
parent process is killed!root@kali:~/wyq/S4#
child process 2 is killed by parent!gcc -o S4_1-3.out S4_1-3.c
两个都关掉
^C
parent process is killed!root@kali:~/wyq/S4#
child process 2 is killed by parent!
child process 1 is killed by parent!^C
