VC通用控件自适应屏幕类
文章来源:http://blog.csdn.net/achellies/article/details/4273035
注:转载文章仅是为了方便自己保存学习来提升自我。
此为我程序中的一个类,本用于WinCE,但在桌面系统上也同样适用!
使用方法(在WM_INITDIALOG或WM_CREATE消息中加入):
CWindowAnchor::BeginControlBound(hwnd)
手动调整控件位置:
CWindowAnchor::AddControl(hwnd,IDC_STATIC1,&WindowAnchorInfo(WAT_LEFT|WAT_TOP,2,8,4,10));
CWindowAnchor::AddControl(hwnd,IDC_STATIC1,&WindowAnchorInfo(WAT_LEFT|WAT_TOP|WAT_RIGHT,2,20,4,10));
CWindowAnchor::AddControl(hwnd,IDC_STATIC1,&WindowAnchorInfo(WAT_LEFT|WAT_TOP,2,8,40,10));
CWindowAnchor::AddControl(hwnd,IDC_STATIC1,&WindowAnchorInfo(WAT_LEFT|WAT_TOP|WAT_RIGHT,2,20,4,10));
CWindowAnchor::AddControl(hwnd,IDC_STATIC1,&WindowAnchorInfo(WAT_LEFT|WAT_TOP,2,8,40,10));
自动调整控件位置(跟据设计时资源文件中控件的大小及位置):
CWindowAnchor::AddControl(hwnd,IDC_STATIC1,&WindowAnchorInfo(WAT_LEFT|WAT_TOP));
CWindowAnchor::AddControl(hwnd,IDC_STATIC1,&WindowAnchorInfo(WAT_LEFT|WAT_TOP|WAT_RIGHT));
CWindowAnchor::AddControl(hwnd,IDC_STATIC1,&WindowAnchorInfo(WAT_LEFT|WAT_TOP|WAT_RIGHT));
响应WM_SIZE消息:
case WM_SIZE:
return HANDLE_WM_SIZE(hwndDlg,wParam,lParam,CWindowAnchor::OnSize);
return HANDLE_WM_SIZE(hwndDlg,wParam,lParam,CWindowAnchor::OnSize);
响应WM_DESTROY消息:
CWindowAnchor::EndControlBound(hwnd);
代码:
#pragma once
#include <map>
#if defined (_MSC_VER)
#pragma warning(disable: 4786)
#endif
/*用于WindowAnchorInfo结构的停靠类型*/
typedef enum WindowAnchorType
{
WAT_TOP=0x0001,
WAT_LEFT=0x0002,
WAT_RIGHT=0x0004,
WAT_BOTTOM=0x0008
};
/*控件定位描述信息*/
typedef struct WindowAnchorInfo{
DWORD dwAnchor; //WAT_*
RECT rcOriginalRect; //控件的原始边距,如果为空则自动获取(仅适用于WM_INIT中)
WindowAnchorInfo(DWORD pAnchor=WAT_TOP|WAT_LEFT,LONG pLeft=0,LONG pTop=0,LONG pRight=0,LONG pBottom=0)
{
dwAnchor=pAnchor;
rcOriginalRect.left=pLeft;
rcOriginalRect.top=pTop;
rcOriginalRect.right=pRight;
rcOriginalRect.bottom=pBottom;
};
};
typedef std::map<HWND,WindowAnchorInfo> ControlHashtable;
typedef struct{
INT nWidth; //对话框宽度
INT nHeight; //对话框高度
INT nMinHeight; //对话框最小高度
ControlHashtable mapControls; //对话框所有子控件
}WindowAnchorDialog;
/*
* 对话框子控件定位
* 2009.03.29 By Frank
*/
static class CWindowAnchor
{
private:
static BOOL _ReSize(HWND hwndDlg, const WindowAnchorDialog *wad, HWND hwndCtrl, const WindowAnchorInfo *wai);
public:
/*
* 开始调整(此调用中会获取当前对话框的大小,如果在设计后要调整对话框大小,请先调用此方法)
* hwndDlg:对话框句柄
*/
static BOOL BeginControlBound(HWND hwndDlg);
/*
* 结束调整
* hwndDlg:对话框句柄
*/
static BOOL EndControlBound(HWND hwndDlg);
/*
* 添加一个控件到调整列表
* hWndInsertAfter:HWND_BOTTOM |HWND_NOTOPMOST | HWND_TOP | HWND_TOPMOST |-2不改变 | Is Hwnd
*/
static BOOL AddControl(HWND hwndDlg, INT nCtrlID, WindowAnchorInfo *wai, HWND hWndInsertAfter=(HWND)-2);
/*
* 调整一个指定控件的大小
*/
static BOOL ReSize(HWND hwndDlg, HWND hwndCtrl);
/*
* 响应WM_SIZE消息
*/
static BOOL OnSize(HWND hwndDlg, UINT state, int cx, int cy);
/*相应WM_VSCROLL消息*/
static BOOL OnVScroll(HWND hwnd, HWND hwndCtl, UINT code, int pos);
};