Executable Version (7.1.1) Doesn't Match Resource File (7.1)

Primary Software: LabVIEW Run-Time Engine
Primary Software Version: 7.1.1
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
When trying to run a VI that was built into an executable, I get the following error: "Executable Version (7.1.1) Doesn't Match Resource File (7.1) Check Your Configuration". I have recently updated LabVIEW from 7.1 to version 7.1.1. The VI that the executable was built from works fine on this machine but the stand-alone executable does not.

This error is also occurring when I try to open Measurement and Automation Explorer or the Vision Assistant.

Solution:
This problem is most likely due to a corrupted or incomplete LabVIEW 7.1.1 Run-Time Engine installation. Since the Run-Time Engine is needed to run LabVIEW executables, this installation will have to be repaired. To repair the LabVIEW 7.1.1 Run-Time Engine, complete the following steps:

1. Go to Add or Remove Programs
2. Select National Instruments Software and click Change
3. In the National Instruments Software dialog window that appears select NI LabVIEW Run-Time Engine 7.1.1 and click Repair

Note: In Measurement & Automation Explorer the LabVIEW Run-time Engine 7.1.1 will not appear under the Software folder. To verify that the software is installed check under National Instruments Software in Add or Remove Programs.