[转]How WebKit’s Event Model Works

原文:https://homes.cs.washington.edu/~burg/projects/timelapse/articles/webkit-event-implementation/

First, here are some definitions of major parts of WebKit:

JavaScriptCore
The JavaScript execution engine. It has no dependencies on other components.
WebCore
The page rendering/layout/event dispatching component. This is the vast majority of the codebase in size and complexity. It depends on JavaScriptCore (JSC). Several portions have different implementations for each platform, such as graphics, sound, network, user input handling, and run loop integration.
WebKit
A fairly small layer that makes WebCore easier to embed by exposing a higher-level interface. It depends on all of the above.
WebKit2
a more complicated split-process layer for embedding WebKit. It depends on all of the above.

What controls the course of computation?

WebKit2 uses a split process model, where the Web process runs WebCore to handle parsing, layout, rendering, and script running for one web view. The browser/chrome process handles non-rendering tasks such as network communications and niceties for the user, like bookmarks and printing. The browser process communicates with all of its Web processes via inter-process communication (IPC). Essentially, one can view these messages as a queue of events to be handled. I’ll refer to these events as IPC messages.

Occasionally during the course of rendering a page or running a script, WebKit needs to perform (possibly a lot of) computation some time in the future, using timer callbacks. Common uses are implementing JavaScript timers or animations, which must run frequently to fill in many animation frames. I’ll refer to these callbacks as timers.

Timers allow asynchronous computation, and fire in a FIFO fashion: several callbacks with the same timer interval (say, 100ms) will fire in the order that they were registered. But, if an interval for 1s is set immediately after an interval for 10s, the 1s timer should fire first. This is accomplished by using a priority queue to keep track of which timers to fire next. Intervals with less time remaining to completion have greater priority than longer intervals. Among intervals with the same time remaining, those registered earlier have greater priority.

Thus, computation in WebKit is initiated by processing messages on one of two queues:

  • Callbacks from the timer priority queue.
  • Messages from the Browser process across IPC..

How internal timers are implemented

Periodically, all timers that are due for firing are fired synchronously and evicted from the queue (or re-inserted, for reoccuring timers). This periodic action is performed by a platform-level timer, whose base class is WebCore::SharedTimer. Each platform has its own event loop implementation, so each platform defines its own SharedTimer subclass that hooks into native event loops. The OSX subclass ofSharedTimer (SharedTimerMac), for example, registers a Cocoa CFRunLoopTimer. This is later called periodically by the native event loop, which is invoked inside the WebKit2::RunLoop implementation (RunLoopMac), which is called in the main() method of the Web process.

The shared timer callback is registered via the following code path: ThreadTimers::setSharedTimer(SharedTimer* timer) -> MainThreadSharedTimer->setFiredFunction(ThreadTimers::sharedTimerFired) -> SharedTimer->setFiredFunction(void) -> SharedTimerMac->setSharedTimerFiredFunction(void)

The SharedTimer’s interval is continously adjusted to the interval of the next due timer. This reduces the number of callbacks by SharedTimer to ThreadTimers::sharedTimerFired in cases where few timers are active (or a long ways into the future). When it’s time for a timer to fire, the code path looks something like:

[NSApplication run] (native loop)
-> timerFired()
-> ThreadTimers::sharedTimerFired()
-> threadGlobalData().threadTimers().sharedTimerFiredInternal()  [1]
-> WebCore::Timer<WebCore::YourClass>->fired()

Inside of [1] is where eligible timers are looped over and fired, and the SharedTimer interval is possibly adjusted. The gist of routine is to fire events until none are ready to fire or we have exceeded a time limit.

The native run loop fires lots of other native timers and callbacks, as well. At every such point (notably in file IO, streams, networking, and graphics), WebKit includes an implementation for each port/platform, which may add or remove native events from the native RunLoop.

How IPC messages are handled

The Browser process sends messages to each Web process to communicate information such as resource data, user input, window resize, etc. These messages are piped to the Web process, which creates a WorkItem for each message. These work items are queued on the native event loop, and performed in course. In the OSX port, the RunLoop::performWork method is registered as aCFRunLoopSource—-in essence, it is registered as an additional source of events for the event loop. The body of performWork copies the list of WorkItems present upon method entry, works through the copied items, and then returns. Note that new work items may arrive when copied ones are being processed; these will be handled in the next call to performWork. Below is a typical sequence of calls leading from the native event loop through processing the IPC message to calling the respective WebCore handler.

[NSApplication run] (native event loop)
-> RunLoopMac::performWork(void*)
-> RunLoop::performWork()
-> CoreIPC::Connection::dispatchMessages()
-> CoreIPC::Connection::dispatchMessage()
-> WebKit::WebProcess::didReceiveMessage(connection, messageID,
arguments)
-> WebKit::WebPage::didReceiveWebPageMessage(connection, messageId,
arguments)
-> CoreIPC::handleMessage(arguments, WebPageMessageReceiver, targetFn)
-> targetFn(args...)

At the point of targetFn, the message can be handled in several ways. The important thing to note is that once these handlers reach WebCore, they are handled synchronously.

Where do DOM events fit into this picture?

DOM events are the abstraction for event-driven programming in web applications and JavaScript. (TheMugshot paper has a good overview of the DOM event model.) However, DOM events have not yet come into the picture—-where do they originate from?

Most user input DOM events, such as clicks, scroll wheel, and keyboard, are created in response to corresponding IPC messages. In that case, the targetFn above will mediate between the native or browser view of user input and the DOM event standards. This mediation also converts from raw screen coordinates to a DOM target, and excludes some events that should not be reflected into the DOM model as input (for example, clicking on a scrollbar). Here is a typical sequence of calls from IPC targetFn to DOM dispatch as described in the above link:

WebKit::WebPage::mouseEvent(WebMouseEvent)
-> WebKit::handleMouseEvent(WebMouseEvent, Page)
-> WebCore::EventHandler::dispatchMouseEvent(eventType, targetNode,
clickCount, PlatformMouseEvent)
-> Node::dispatchMouseEvent(...)
-> EventDispatcher::dispatchEvent(Node, EventDispatchMediator)
-> MouseEventDispatchMediator::dispatchEvent(EventDispatcher)
-> EventDispatcher::dispatchEvent(Event)    // performs event dispatch according to DOM standard.

It is possible for some DOM events to immediately fire other DOM events synchronously. For example, the default event handler for the space or enter keyboard event on the <input type=”submit”> element will typically fire a second DOM “submit” event on the containing <form> element. This can be seen in the body and callers of HTMLFormElement::submitImplicitly. What are the important points?

The top-level event loop is usually defined by the respective WebKit port, such as Cocoa, QT, GTK, etc. Timers internal to WebCore are manually tracked and dispatched by a single native timer that participates in the native run (event) loop. IPC messages are also handled according to the native run loop, and sometimes lead to dispatching DOM user input events. DOM events can potentially be triggered directly by timers internal to WebCore. An example is that animation-related DOM events are triggered by a timer in the AnimationController::animationTimerFired callback. In general though, user input is only triggered by IPC messages.

posted @ 2014-06-15 01:41  Proteas  阅读(459)  评论(0编辑  收藏  举报