[转]Waledac's Anti-Debugging Tricks

src:http://www.honeynet.org/node/550

The last spreading malware version of Waledac, a notorious spamming botnet that has been taken down in a collaborative effort lead by Microsoft earlier this year, contained some neat anti-debugging tricks in order to make reverse-engineering more difficult. Felix Leder and I have been presenting about the approach at SIGINT 2010 in Cologne yesterday, and as the method seems to be not publicly known yet, I will quickly describe it here as well.

Debugging Waledac - Start
At the entry point of Waledac's code

The md5 hash of the sample I was playing with is79f24cefd98c162565da71b4aa01e87b. When you load it into a debugger, you see two functions, one calling the other. Apparently, somewhere in there must be a branch into the real code. So let's look more closely. The instructions of the second function starting at offset 0x004010CB are pretty standard. What they do is to put an additional exception handler in the SEH chain that would be called on, e.g., memory access violations:

004010CB  2BC9           SUB ECX,ECX                    ; clear ECX  
004010CD  64:FF31        PUSH DWORD PTR FS:[ECX]        ; push pointer to end of SEH chain on stack
004010D0  64:8921        MOV DWORD PTR FS:[ECX],ESP     ; set SEH chain pointer to the new handler

The address 0x004010A9 has been pushed on the stack as return address by the previous call, so the code starting at this offset would be called upon exceptions. This is what the stack looks like now:

Debugging Waledac - The SEH Chain on the Stack
The stack after setting a custom SE handler

After the new exception handler is in place, an access violation is triggered by subtracting the value in EAX from [0x00401000], which is in a non-writeable memory section. This is the code line triggering the exception:

004010D3  2905 00104000  SUB DWORD PTR DS:[401000],EAX  ; trigger an access violation exception

Let's have a look at what the exception hander does. The first three instructions basically load [ESP+C] in the ECX register, which then points to the so-calledContextRecord that also contains the faulting instruction's offset. (The dereferencing could have been done in a single instruction relative to ESP, and I don't quite understand why this code uses EAX for it - but hey, who's perfect.) Have a look atcrash course on Win32 exception handling if you want to learn how to get the faulting address out of the context information.

Debugging Waledac - Exception Handler
The custom SE handler's code

Next, the handler decrements a stack variable that was initialized with 0x15000 at offset 0x0040109E. We will see shortly that this variable does in fact serve as some kind of loop counter. The decremented value is written back into the variable at offset 0x004010C5. What happens now is that the exception handler will continue execution at the faulting instruction, because this is where _CONTEXT.Eip points to. Of course, the memory location is still not writeable, so we will end up in our exception handler again. Things are getting interesting when the counter variable is decremented to 0. Have a look at the following line:

004010BE  831419 0A      ADC DWORD PTR DS:[ECX+EBX],0A  ; add 10 to the faulting address

By adding 0x0A to the saved faulting address, the offset where execution is continued after the exception handler returns is changed to 0x004010DD. So let's interpret the bytes at this address as instructions.

The Second-Stage Anti-Debugging Code

The picture below displays the disassembly of the code that is executed after the stack variable reaches 0. The first two instructions restore the SEH chain by resetting the pointer at FS:[0]. Then the image base is calculated from the return address of the call mentioned above by zeroing DX. Finally, EAX is set to 1 - we will see in a bit what that is good for.

Debugging Waledac - Stage 2
2nd stage code with INT 2E trick

As you can see, the jump instruction takes execution to an INT 2E at offset0x004010F0. This instruction calls a ring-0 subroutine and takes the system service's index in EAX and a pointer to a parameter block in EDX. In this case, theAccessCheck() routine (i.e. routine 0x1) is being called. The purpose here is to trigger an access violation, so that is why EDX has been loaded with 0x00400000. When this service routine throws an error, the error code is returned in EAX and EDX contains the address of the instruction following the failing one. So that should be 0x004010F2in this case. However, if the program is being executed either inside VirtualBox or with OllyDbg or also ImmunityDebugger attached, the EDX register would contain0xFFFFFFFF instead. So this fact may be used to detect if the process is being debugged or running inside a virtual machine.

Working Around It

What Waledac does with the instructions starting at 0x004010F3 is to derive an offset from EAX and EDX and to push this value on the stack. It would then jump back to the RETN instruction at 0x004010DC which, in turn, takes the computed value on the stack as return address and jumps there.

Debugging Waledac - SoftICE Style Breakpoint
Re-attaching to Waledac, looping in a "breakpoint"

The problem is, how can we easily get the correct offset here? I decided to use a little trick I tried with success previously when analyzing SEH-based anti-debugging code: You can put a SoftICE-style breakpoint at offset 0x00401020, i.e. just before we jump back to the return instruction, by patching in a JMP -2. This results in an endless loop. Now you can dump the patched version, execute it, wait a bit in order for the SEH loop to finish, and then attach a debugger. The picture above shows the situation when I re-attached - the highlighted instruction implements the "breakpoint". By inspecting the top-most stack entry, we see that the target offset is 0x0040561E. The final step is to restore the original jump instruction and continue execution inside the debugger. By the way, I did this in qemu which worked quite nicely.

The Final Stage

The next stage functions independent from the previous parts. All it requires is an address to calculate the image base address from again. As there is still one on the stack (it is the one taken from EDX after the INT 2E, see above), we are fine. Here is the code of this part. Again, this could have been done more efficiently.

0040561E   5A               POP EDX                        ; load address from INT 2E 
0040561F   60               PUSHAD                         ; save registers
00405620   52               PUSH EDX                       ; save EDX
00405621   B9 AE080000      MOV ECX,8AE                    ; useless crap
00405626   8B3C24           MOV EDI,DWORD PTR SS:[ESP]     ; load saved address in EDI
00405629   66:33FF          XOR DI,DI                      ; zero out lower word to get image base
0040562C   8BD7             MOV EDX,EDI                    ; write result back in EDX
0040562E   037F 3C          ADD EDI,DWORD PTR DS:[EDI+3C]  ; spot start of PE header
00405631   81C7 48010000    ADD EDI,148                    ; spot .data entry in section table
00405637   8B7F 0C          MOV EDI,DWORD PTR DS:[EDI+C]   ; get PointerToRawData
0040563A   03FA             ADD EDI,EDX                    ; add it to the image base
0040563C   8BC7             MOV EAX,EDI                    ; store it in EAX
0040563E   E8 00000000      CALL looping-.00405643         ; push return address on the stack
00405643   5E               POP ESI                        ; EIP -> ESI
00405644   83C6 08          ADD ESI,8                      ; correct the offset
00405647   F3:A4            REP MOVS BYTE PTR ES:[EDI],BYTE PTR DS:[ESI]  ; copy stuff into the .data section
00405649   FFE0             JMP EAX                        ; jump to the copied code

The jump instruction will take us to some self-modifying code at 0x00403000 that makes extensive use of floating point instructions, most likely to confuse analysts (I haven't looked into them too much). The decoded part starts at 0x004031E5 if you want to have a look yourself. In a nutshell, what it does is:

  • spot GetProcAddress and LoadLibraryA in kernel32.dll
  • use these to find a couple of other API calls (VirtualAlloc, VirtualProtect
  • set the image section's attributes to PAGE_EXECUTE_READWRITE
  • decrypt bytes at 0x00405EF9 to restore a valid PE file
  • map the decoded PE file into memory at 0x00400000 by overwriting the current image
  • build an import address table (IAT) for it
  • set the section attributes to PAGE_EXECUTE_READ and PAGE_READONLY for the import and data section respectively
  • return to the new image's entry point

This part does contain some trivial anti-debugging checks like embedded INT3instructions which are easy to handle. We can now dump the process or assemble the original binary from the new sections. If we take a look at the unpacked code in a disassembler, we observe two IP addresses this Waledac version is apparently trying to connect to. However, this is now standard reverse-engineering stuff and beyond this blog post. So I will leave it with that.

Debugging Waledac - Disassembly
The restored PE file in a disassembler

What we have seen is how this Waledac version tries protect itself from being debugged. It implements multiple code stages with the goal to confuse debuggers, but eventually restores its original code. By using debugging tools in a smart fashion we can still track and control the individual steps.

posted @ 2013-05-10 00:09  Proteas  阅读(375)  评论(0编辑  收藏  举报