如何重启Cisco LAP？
在Cisco WLC上进入对应的AP，能够看到Reset这个AP，但是这里会有两种选择：
看到上述的描述，可能很多人都不敢轻易的操作：
1、Hardware Reset：Perform a hardware reset on this AP
2、Set to Factory Defaults：Clear configuration on this AP and reset it to factory defaults
我们都知道LAP的配置是从WLC统一下发的。可能唯一觉得重要的，就是静态的IP地址，况且有时候我们使用的还是DHCP，并且使用了DHCP Option43，所以，即便是AP被Reset了，也可以获取IP地址和WLC的IP地址，然后重新加入到WLC。这一点是不用担心的。
从Set to Factory Defaults这里可以看到，有Clear All Config 和 Clear Config Except Static IP这两种选择。说明给静态配置IP的AP，也是留有选择的余地的。
那么如果只需要重启AP，选择Hardware Reset : Reset AP Now 就好了。如果是CLI命令行，输入如下命令：
(Cisco Controller) >config ap reset ?
<Cisco AP> Enter the name of the Cisco AP.
示例：
先查看一下目前AP是正常加入WLC的：
(Cisco Controller) >show ap summary
Number of APs.................................... 1
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Country IP Address Clients DSE Location
------------------ ----- -------------------- ----------------- ---------------- ---------- --------------- -------- --------------
AP3602I-01 2 AIR-CAP3602I-A-K9 30:f7:0d:xx:xx:xx default location US 192.168.200.136 0 [0 ,0 ,0 ]
重启该AP：
(Cisco Controller) >config ap reset AP3602I-01
Would you like to reset AP3602I-01 ? (y/n)y
此时查看AP已经从WLC上消失：
(Cisco Controller) >show ap summary
Number of APs.................................... 0
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
稍等一会儿，再从WLC上查看，可以看到该AP已经重新加入WLC。
(Cisco Controller) >show ap summary
Number of APs.................................... 1
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Country IP Address Clients DSE Location
------------------ ----- -------------------- ----------------- ---------------- ---------- --------------- -------- --------------
AP3602I-01 2 AIR-CAP3602I-A-K9 30:f7:0d:xx:xx:xx default location US 192.168.200.136 0 [0 ,0 ,0 ]
查看AP uptime和association time：
(Cisco Controller) >show ap uptime
Number of APs.................................... 1
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Ethernet MAC AP Up Time Association Up Time
------------------ ----------------- ----------------------- -----------------------
AP3602I-01 30:f7:0d:xx:xx:xx 0 days, 00 h 02 m 24 s 0 days, 00 h 00 m 50 s
