/*
2008-11-20
由于相关资源已经失效,现上传至本博客,请下载
https://files.cnblogs.com/Microshaoft/CMPP3.ISMG.zip
.Net/C# 实现 中国移动 CMPP v3.0 ISMG <-> SP 收发短信的 SP 客户端 (第3版)(CMPP SP Client)
增加了 CMPP Client 类
本程序严格按
《中国移动通信企业标准》之《中国移动通信互联网短信网关接口协议(China Mobile Point to Point)》(版本号: 3.0.0)
即: CMPP v3.0.0
http://www.spzone.net/protocol/CMPPV3.0.rar
文档,实现了下面消息的定义及其相关协议级交互:
8.4 业务提供商 (SP) 与互联网短信网关 (ISMG) 间的消息定义 8
8.4.1 SP 请求连接到 ISMG(CMPP_CONNECT) 操作 8
8.4.1.1 CMPP_CONNECT 消息定义 (SP -> ISMG) 8
8.4.1.2 CMPP_CONNECT_RESP消息定义 (ISMG -> SP) 9
8.4.2 SP 或 ISMG 请求拆除连接 (CMPP_TERMINATE)操作 9
8.4.2.1 CMPP_TERMINATE 消息定义 (SP -> ISMG 或 ISMG -> SP) 9
8.4.2.2 CMPP_TERMINATE_RESP 消息定义 (SP -> ISMG 或 ISMG -> SP) 10
8.4.3 SP 向 ISMG提交短信 (CMPP_SUBMIT) 操作 10
8.4.3.1 CMPP_SUBMIT 消息定义 (SP -> ISMG) 10
8.4.3.2 CMPP_SUBMIT_RESP 消息定义 (ISMG -> SP) 11
8.4.5 ISMG 向 SP 送交短信 (CMPP_DELIVER) 操作 13
8.4.5.1 CMPP_DELIVER 消息定义 (ISMG -> SP) 13
8.4.5.2 CMPP_DELIVER_RESP 消息定义 (SP -> ISMG) 16
8.4.7 链路检测 (CMPP_ACTIVE_TEST) 操作 17
8.4.7.1 CMPP_ACTIVE_TEST定义 (SP -> ISMG 或 ISMG <- SP) 17
8.4.7.2 CMPP_ACTIVE_TEST_RESP定义 (SP -> ISMG 或 ISMG <- SP) 17
可采用《中国移动通信 CMPP v3.0 短消息网关模拟器 v1.10》进行测试:
下载于: 《北京风起水流软件工作室》
http://www.zealware.com/download/cmpp3smg.rar
《中国移动通信 CMPP v3.0 短消息网关模拟器 v1.10》
http://tech.spforum.net/uploadfile/2006426181749702.rar
本程序以熟悉理解 CMPP 3.0 协议为主要目的,只将 "消息定义" 对象化,其相关协议级交互并未作更深层次的 OO!
也暂无任何异常处理程序!
消息定义的所有字段名称及其数据类型均与上述之 CMPP v3.0.0 文档完全一致!
其间参阅过 shanhe@CSDN or yexiong@cnBlogs 大作(在此鸣谢):
http://blog.csdn.net/shanhe/archive/2004/07/19/45383.aspx
http://cnblogs.com/yexiong/articles/115330.aspx
但其中有些消息定义字节错位,因此不能正常交互?!且对象化层次较高,不利于理解协议本身!
遂自己动手,丰衣足食,实现部分主要协议(SP 收发短信):
playyuer㊣Microshaoft.com Invent.
*/
//CMPP 消息定义
namespace Microshaoft.CMPP.Messages
{
using System;
using System.Text;
using System.Security.Cryptography;
public enum CMPP_Command_Id : uint
{
CMPP_CONNECT = 0x00000001 //请求连接
, CMPP_CONNECT_RESP = 0x80000001 //请求连接应答
, CMPP_TERMINATE = 0x00000002 //终止连接
, CMPP_TERMINATE_RESP = 0x80000002 //终止连接应答
, CMPP_SUBMIT = 0x00000004 //提交短信
, CMPP_SUBMIT_RESP = 0x80000004 //提交短信应答
, CMPP_DELIVER = 0x00000005 //短信下发
, CMPP_DELIVER_RESP = 0x80000005 //下发短信应答
, CMPP_QUERY = 0x00000006 //发送短信状态查询
, CMPP_QUERY_RESP = 0x80000006 //发送短信状态查询应答
, CMPP_CANCEL = 0x00000007 //删除短信
, CMPP_CANCEL_RESP = 0x80000007 //删除短信应答
, CMPP_ACTIVE_TEST = 0x00000008 //激活测试
, CMPP_ACTIVE_TEST_RESP = 0x80000008 //激活测试应答
, CMPP_FWD = 0x00000009 //消息前转
, CMPP_FWD_RESP = 0x80000009 //消息前转应答
, CMPP_MT_ROUTE = 0x00000010 //MT路由请求
, CMPP_MT_ROUTE_RESP = 0x80000010 //MT路由请求应答
, CMPP_MO_ROUTE = 0x00000011 //MO路由请求
, CMPP_MO_ROUTE_RESP = 0x80000011 //MO路由请求应答
, CMPP_GET_MT_ROUTE = 0x00000012 //获取MT路由请求
, CMPP_GET_MT_ROUTE_RESP = 0x80000012 //获取MT路由请求应答
, CMPP_MT_ROUTE_UPDATE = 0x00000013 //MT路由更新
, CMPP_MT_ROUTE_UPDATE_RESP = 0x80000013 //MT路由更新应答
, CMPP_MO_ROUTE_UPDATE = 0x00000014 //MO路由更新
, CMPP_MO_ROUTE_UPDATE_RESP = 0x80000014 //MO路由更新应答
, CMPP_PUSH_MT_ROUTE_UPDATE = 0x00000015 //MT路由更新
, CMPP_PUSH_MT_ROUTE_UPDATE_RESP = 0x80000015 //MT路由更新应答
, CMPP_PUSH_MO_ROUTE_UPDATE = 0x00000016 //MO路由更新
, CMPP_PUSH_MO_ROUTE_UPDATE_RESP = 0x80000016 //MO路由更新应答
, CMPP_GET_MO_ROUTE = 0x00000017 //获取MO路由请求
, CMPP_GET_MO_ROUTE_RESP = 0x80000017 //获取MO路由请求应答
}
public class MessageHeader //消息头
{
public const int Length = 4 + 4 + 4;
public CMPP_Command_Id Command_Id
{
get
{
return _Command_Id;
}
}
public uint Sequence_Id
{
get
{
return _Sequence_Id;
}
}
public uint Total_Length
{
get
{
return _Total_Length;
}
}
private uint _Total_Length; // 4 Unsigned Integer 消息总长度(含消息头及消息体)
private CMPP_Command_Id _Command_Id; // 4 Unsigned Integer 命令或响应类型
private uint _Sequence_Id; // 4 Unsigned Integer 消息流水号,顺序累加,步长为1,循环使用(一对请求和应答消息的流水号必须相同)
public MessageHeader
(
uint Total_Length
, CMPP_Command_Id Command_Id
, uint Sequence_Id
) //发送前
{
_Total_Length = Total_Length;
_Command_Id = Command_Id;
_Sequence_Id = Sequence_Id;
}
public MessageHeader(byte[] bytes)
{
byte[] buffer = new byte[4];
Buffer.BlockCopy(bytes, 0, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_Total_Length = BitConverter.ToUInt32(buffer, 0);
Buffer.BlockCopy(bytes, 4, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_Command_Id = (CMPP_Command_Id)BitConverter.ToUInt32(buffer, 0);
Buffer.BlockCopy(bytes, 8, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_Sequence_Id = BitConverter.ToUInt32(buffer, 0);
}
public byte[] ToBytes()
{
byte[] bytes = new byte[MessageHeader.Length];
byte[] buffer = BitConverter.GetBytes(_Total_Length);
Array.Reverse(buffer);
Buffer.BlockCopy(buffer, 0, bytes, 0, 4);
buffer = BitConverter.GetBytes((uint) _Command_Id);
Array.Reverse(buffer);
Buffer.BlockCopy(buffer, 0, bytes, 4, 4);
buffer = BitConverter.GetBytes(_Sequence_Id);
Array.Reverse(buffer);
Buffer.BlockCopy(buffer, 0, bytes, 8, 4);
return bytes;
}
public override string ToString()
{
return string.Format
(
"\tMessageHeader:{0}Command_Id: [{1}]{0}Sequence_Id: {2}{0}Total_Length: [{3}]"
, "\r\n\t\t"
, _Command_Id
, _Sequence_Id
, _Total_Length
);
}
}
public class CMPP_CONNECT //: CMPP_Request
{
public const int _FixedBodyLength = 6 + 16 + 1 + 4;
private string _Source_Addr; // 6 Octet String 源地址,此处为SP_Id,即SP的企业代码。
private string _Password;
private byte[] _AuthenticatorSource; // 16 Octet String 用于鉴别源地址。其值通过单向MD5 hash计算得出,表示如下:
// AuthenticatorSource =
// MD5(Source_Addr+9 字节的0 +shared secret+timestamp)
// Shared secret 由中国移动与源地址实体事先商定,timestamp格式为:MMDDHHMMSS,即月日时分秒,10位。
private uint _Version; // 1 Unsigned Integer 双方协商的版本号(高位4bit表示主版本号,低位4bit表示次版本号),对于3.0的版本,高4bit为3,低4位为0
private uint _Timestamp; // 4 Unsigned Integer 时间戳的明文,由客户端产生,格式为MMDDHHMMSS,即月日时分秒,10位数字的整型,右对齐 。
private MessageHeader _Header;
public MessageHeader Header
{
get
{
return _Header;
}
}
public byte[] AuthenticatorSource
{
get
{
return _AuthenticatorSource;
}
}
public CMPP_CONNECT
(
uint Sequence_Id //header
, string Source_Addr
, string Password
, uint Version
, DateTime Timestamp
)
{
_Header = new MessageHeader
(
MessageHeader.Length + _FixedBodyLength
, CMPP_Command_Id.CMPP_CONNECT
, Sequence_Id
);
_Source_Addr = Source_Addr;
_Password = Password;
string s = DateTimeHelper.Get_MMddHHmmss_String(Timestamp);
_Timestamp = IntegerHelper.UInt32Parse(s);//UInt32.Parse(s);
byte[] buffer = new byte[6 + 9 + _Password.Length + 10];
Encoding.ASCII.GetBytes(_Source_Addr).CopyTo(buffer, 0);
Encoding.ASCII.GetBytes(_Password).CopyTo(buffer, 6 + 9);
Encoding.ASCII.GetBytes(s).CopyTo(buffer, 6 + 9 + _Password.Length);
_AuthenticatorSource = CryptoHelper.ComputeMD5(buffer);//new MD5CryptoServiceProvider().ComputeHash(buffer, 0, buffer.Length);
_Version = Version;
}
public byte[] ToBytes()
{
int i = 0;
byte[] bytes = new byte[MessageHeader.Length + _FixedBodyLength];
//header 12
byte[] buffer = _Header.ToBytes();
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length);
//Source_Addr 6
i += MessageHeader.Length;
buffer = Encoding.ASCII.GetBytes(_Source_Addr);
Buffer.BlockCopy(buffer, 0, bytes, i, 6);
//AuthenticatorSource 16
i += 6;
buffer = _AuthenticatorSource;
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //16
//version 1
i += 16;
bytes[i++] = (byte) _Version; //版本
//Timestamp
buffer = BitConverter.GetBytes(_Timestamp);
Array.Reverse(buffer);
buffer.CopyTo(bytes, i);
return (bytes);
}
public override string ToString()
{
return "[\r\n"
+ _Header.ToString() + "\r\n"
+ "\t"
+ string.Format
(
"MessageBody:"
+ "{0}AuthenticatorSource: [{1}]"
+ "{0}Password: {2}"
+ "{0}Source_Addr: [{3}]"
+ "{0}Version: [{4}]"
, "\r\n\t\t"
, CryptoHelper.BytesArrayToHexString(_AuthenticatorSource)
, _Password
, _Source_Addr
, _Timestamp
, _Version
)
+ "\r\n]";
}
}
public class CMPP_CONNECT_RESP //: CMPP_Response
{
private MessageHeader _Header;
public const int BodyLength = 4 + 16 + 1;
private uint _Status; // 4 Unsigned Integer 状态
// 0:正确
// 1:消息结构错
// 2:非法源地址
// 3:认证错
// 4:版本太高
// 5~:其他错误
private byte[] _AuthenticatorISMG; // 16 Octet String ISMG认证码,用于鉴别ISMG。
// 其值通过单向MD5 hash计算得出,表示如下:
// AuthenticatorISMG =MD5(Status+AuthenticatorSource+shared secret),Shared secret 由中国移动与源地址实体事先商定,AuthenticatorSource为源地址实体发送给ISMG的对应消息CMPP_Connect中的值。
// 认证出错时,此项为空。
private uint _Version; // 1 Unsigned Integer 服务器支持的最高版本号,对于3.0的版本,高4bit为3,低4位为0
public byte[] AuthenticatorISMG
{
get
{
return _AuthenticatorISMG;
}
}
public uint Status
{
get
{
return _Status;
}
}
public uint Version
{
get
{
return _Version;
}
}
public MessageHeader Header
{
get
{
return _Header;
}
}
public CMPP_CONNECT_RESP(byte[] bytes)
{
//header 12
int i = 0;
byte[] buffer = new byte[MessageHeader.Length];
Buffer.BlockCopy(bytes, 0, buffer, 0, buffer.Length);
_Header = new MessageHeader(buffer);
//status 4
i += MessageHeader.Length;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_Status = BitConverter.ToUInt32(buffer, 0);
//AuthenticatorISMG 16
i += 4;
_AuthenticatorISMG = new byte[16];
Buffer.BlockCopy
(
bytes
, MessageHeader.Length + 4
, _AuthenticatorISMG
, 0
, _AuthenticatorISMG.Length
);
//version
i += 16;
_Version = bytes[i];
}
public override string ToString()
{
return "[\r\n"
+ _Header.ToString() + "\r\n"
+ "\t"
+ string.Format
(
"MessageBody:"
+ "{0}AuthenticatorISMG: [{1}]"
+ "{0}BodyLength: {2}"
+ "{0}Status: [{3}]"
+ "{0}Version: [{4}]"
, "\r\n\t\t"
, CryptoHelper.BytesArrayToHexString(_AuthenticatorISMG)
, CMPP_CONNECT_RESP.BodyLength
, _Status
, _Version
)
+ "\r\n]";
}
}
public class CMPP_SUBMIT //: CMPP_Request
{
private int _BodyLength;
//without _Dest_terminal_Id Msg_Content
public const int FixedBodyLength = 8
+ 1
+ 1
+ 1
+ 1
+ 10
+ 1
+ 32
+ 1
+ 1
+ 1
+ 1
+ 6
+ 2
+ 6
+ 17
+ 17
+ 21
+ 1
//+ 32*DestUsr_tl
+ 1
+ 1
//+ Msg_length
+ 20;
private ulong _Msg_Id; // 8 Unsigned Integer 信息标识。
private uint _Pk_total; // 1 Unsigned Integer 相同Msg_Id的信息总条数,从1开始。
private uint _Pk_number; // 1 Unsigned Integer 相同Msg_Id的信息序号,从1开始。
private uint _Registered_Delivery; // 1 Unsigned Integer 是否要求返回状态确认报告:
// 0:不需要;
// 1:需要。
private uint _Msg_level; // 1 Unsigned Integer 信息级别。
private string _Service_Id; // 10 Octet String 业务标识,是数字、字母和符号的组合。
private uint _Fee_UserType; // 1 Unsigned Integer 计费用户类型字段:
// 0:对目的终端MSISDN计费;
// 1:对源终端MSISDN计费;
// 2:对SP计费;
// 3:表示本字段无效,对谁计费参见Fee_terminal_Id字段。
private string _Fee_terminal_Id; // 32 Octet String 被计费用户的号码,当Fee_UserType为3时该值有效,当Fee_UserType为0、1、2时该值无意义。
private uint _Fee_terminal_type; // 1 Unsigned Integer 被计费用户的号码类型,0:真实号码;1:伪码。
private uint _TP_pId; // 1 Unsigned Integer GSM协议类型。详细是解释请参考GSM03.40中的9.2.3.9。
private uint _TP_udhi; // 1 Unsigned Integer GSM协议类型。详细是解释请参考GSM03.40中的9.2.3.23,仅使用1位,右对齐。
private uint _Msg_Fmt; // 1 Unsigned Integer 信息格式:
// 0:ASCII串;
// 3:短信写卡操作;
// 4:二进制信息;
// 8:UCS2编码;
// 15:含GB汉字......
private string _Msg_src; // 6 Octet String 信息内容来源(SP_Id)。
private string _FeeType; // 2 Octet String 资费类别:
// 01:对"计费用户号码"免费;
// 02:对"计费用户号码"按条计信息费;
// 03:对"计费用户号码"按包月收取信息费。
private string _FeeCode; // 6 Octet String 资费代码(以分为单位)。
private string _ValId_Time; // 17 Octet String 存活有效期,格式遵循SMPP3.3协议。
private string _At_Time; // 17 Octet String 定时发送时间,格式遵循SMPP3.3协议。
private string _Src_Id; // 21 Octet String 源号码。SP的服务代码或前缀为服务代码的长号码, 网关将该号码完整的填到SMPP协议Submit_SM消息相应的source_addr字段,该号码最终在用户手机上显示为短消息的主叫号码。
private uint _DestUsr_tl; // 1 Unsigned Integer 接收信息的用户数量(小于100个用户)。
private string[] _Dest_terminal_Id; // 32*DestUsr_tl Octet String 接收短信的MSISDN号码。
private uint _Dest_terminal_type; // 1 Unsigned Integer 接收短信的用户的号码类型,0:真实号码;1:伪码。
private uint _Msg_Length; // 1 Unsigned Integer 信息长度(Msg_Fmt值为0时:<160个字节;其它<=140个字节),取值大于或等于0。
private string _Msg_Content; // Msg_length Octet String 信息内容。
private string _LinkID; // 20 Octet String 点播业务使用的LinkID,非点播类业务的MT流程不使用该字段。
public MessageHeader Header
{
get
{
return _Header;
}
set
{
_Header = value;
}
}
private MessageHeader _Header;
private uint _Sequence_Id;
public CMPP_SUBMIT(uint Sequence_Id)
{
_Sequence_Id = Sequence_Id;
}
private byte[] _Msg_Content_Bytes;
private void SetHeader()
{
//byte[] buf;
switch (_Msg_Fmt)
{
case 8 :
_Msg_Content_Bytes = Encoding.BigEndianUnicode.GetBytes(_Msg_Content);
break;
case 15 : //gb2312
_Msg_Content_Bytes = Encoding.GetEncoding("gb2312").GetBytes(_Msg_Content);
break;
case 0 : //ascii
case 3 : //短信写卡操作
case 4 : //二进制信息
default :
_Msg_Content_Bytes = Encoding.ASCII.GetBytes(_Msg_Content);
break;
}
_Msg_Length = (uint) _Msg_Content_Bytes.Length;
_BodyLength = (int) (FixedBodyLength + 32 * _Dest_terminal_Id.Length + _Msg_Length);
_Header = new MessageHeader
(
(uint) (MessageHeader.Length + _BodyLength)
, CMPP_Command_Id.CMPP_SUBMIT
, _Sequence_Id
);
}
public byte[] ToBytes()
{
//Msg_Length Msg_Content
int i = 0;
byte[] bytes = new byte[MessageHeader.Length + _BodyLength];
byte[] buffer = _Header.ToBytes();
Buffer.BlockCopy(buffer, 0, bytes, 0, buffer.Length);
i += MessageHeader.Length;
//Msg_Id //8 [12,19]
buffer = new byte[8];
buffer = BitConverter.GetBytes(_Msg_Id);
Array.Reverse(buffer);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //10 //[24,33]
//_Pk_total
i += 8;
bytes[i++] = (byte) _Pk_total; //[20,20]
bytes[i++] = (byte) _Pk_number; //[21,21]
bytes[i++] = (byte) _Registered_Delivery; //[22,22]
bytes[i++] = (byte) _Msg_level; //[23,23]
//Service_Id
buffer = Encoding.ASCII.GetBytes(_Service_Id);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //10 //[24,33]
//Fee_UserType
i += 10;
bytes[i++] = (byte) _Fee_UserType; //[34,34]
//Fee_terminal_Id
buffer = Encoding.ASCII.GetBytes(_Fee_terminal_Id);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //32 //[35,66]
//Fee_terminal_type
i += 32;
bytes[i++] = (byte) _Fee_terminal_type; //[67,67]
bytes[i++] = (byte) _TP_pId; //[68,68]
bytes[i++] = (byte) _TP_udhi; //[69,69]
bytes[i++] = (byte) _Msg_Fmt; //[70,70]
//Msg_src
buffer = Encoding.ASCII.GetBytes(_Msg_src);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //6 //[71,76]
//FeeType
i += 6;
buffer = Encoding.ASCII.GetBytes(_FeeType);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //2 //[77,78]
//FeeCode
i += 2;
buffer = Encoding.ASCII.GetBytes(_FeeCode);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //6 //[79,84]
//ValId_Time
i += 6;
buffer = Encoding.ASCII.GetBytes(_ValId_Time);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //17 //[85,101]
//At_Time
i += 17;
buffer = Encoding.ASCII.GetBytes(_At_Time);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //17 //[102,118]
//Src_Id
i += 17;
buffer = Encoding.ASCII.GetBytes(_Src_Id);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //21 //[119,139]
//DestUsr_tl
i += 21;
_DestUsr_tl = (uint) _Dest_terminal_Id.Length;
bytes[i++] = (byte) _DestUsr_tl; //[140,140]
//Dest_terminal_Id
foreach (string s in _Dest_terminal_Id)
{
buffer = Encoding.ASCII.GetBytes(s);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length);
i += 32;
}
//Dest_terminal_type
bytes[i++] = (byte) _Dest_terminal_type;
//Msg_Length
bytes[i++] = (byte) _Msg_Length;
//Msg_Content
//buffer = Encoding.
Buffer.BlockCopy
(
_Msg_Content_Bytes
, 0
, bytes
, i, _Msg_Content_Bytes.Length
);
//LinkID
i += (int) _Msg_Length;
buffer = Encoding.ASCII.GetBytes(_LinkID);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length); //20
return bytes;
}
public ulong Msg_Id
{
get
{
return _Msg_Id;
}
set
{
_Msg_Id = value;
}
}
public uint Pk_total
{
get
{
return _Pk_total;
}
set
{
_Pk_total = value;
}
}
public uint Pk_number
{
get
{
return _Pk_number;
}
set
{
_Pk_number = value;
}
}
public uint Registered_Delivery
{
get
{
return _Registered_Delivery;
}
set
{
_Registered_Delivery = value;
}
}
public uint Msg_level
{
get
{
return _Msg_level;
}
set
{
_Msg_level = value;
}
}
public string Service_Id
{
get
{
return _Service_Id;
}
set
{
_Service_Id = value;
}
}
public uint Fee_UserType
{
get
{
return _Fee_UserType;
}
set
{
_Fee_UserType = value;
}
}
public string Fee_terminal_Id
{
get
{
return _Fee_terminal_Id;
}
set
{
_Fee_terminal_Id = value;
}
}
public uint Fee_terminal_type
{
get
{
return _Fee_terminal_type;
}
set
{
_Fee_terminal_type = value;
}
}
public uint TP_pId
{
get
{
return _TP_pId;
}
set
{
_TP_pId = value;
}
}
public uint TP_udhi
{
get
{
return _TP_udhi;
}
set
{
_TP_udhi = value;
}
}
public uint Msg_Fmt
{
get
{
return _Msg_Fmt;
}
set
{
_Msg_Fmt = value;
if (_Msg_Content != null)
{
SetHeader();
}
}
}
public string Msg_src
{
get
{
return _Msg_src;
}
set
{
_Msg_src = value;
}
}
public string FeeType
{
get
{
return _FeeType;
}
set
{
_FeeType = value;
}
}
public string FeeCode
{
get
{
return _FeeCode;
}
set
{
_FeeCode = value;
}
}
public string ValId_Time
{
get
{
return _ValId_Time;
}
set
{
_ValId_Time = value;
}
}
public string At_Time
{
get
{
return _At_Time;
}
set
{
_At_Time = value;
}
}
public string Src_Id
{
get
{
return _Src_Id;
}
set
{
_Src_Id = value;
}
}
public uint DestUsr_tl
{
get
{
return _DestUsr_tl;
}
set
{
_DestUsr_tl = value;
}
}
public string[] Dest_terminal_Id
{
get
{
return _Dest_terminal_Id;
}
set
{
_Dest_terminal_Id = value;
}
}
public uint Dest_terminal_type
{
get
{
return _Dest_terminal_type;
}
set
{
_Dest_terminal_type = value;
}
}
public uint Msg_Length
{
get
{
return _Msg_Length;
}
set
{
_Msg_Length = value;
}
}
public string Msg_Content
{
get
{
return _Msg_Content;
}
set
{
_Msg_Content = value;
SetHeader();
}
}
public string LinkId
{
get
{
return _LinkID;
}
set
{
_LinkID = value;
}
}
public override string ToString()
{
return "[\r\n"
+ _Header.ToString() + "\r\n"
+ "\t"
+ string.Format
(
"MessageBody:"
+ "{0}At_Time: [{1}]"
+ "{0}BodyLength: {2}"
+ "{0}Dest_terminal_Id: [{3}]"
+ "{0}Dest_terminal_type: [{4}]"
+ "{0}DestUsr_tl: [{5}]"
+ "{0}Fee_terminal_Id: [{6}]"
+ "{0}Fee_terminal_type: [{7}]"
+ "{0}Fee_UserType: [{8}]"
+ "{0}FeeCode: [{9}]"
+ "{0}FeeType: [{10}]"
+ "{0}LinkID: [{11}]"
+ "{0}Msg_Content: [{12}]"
+ "{0}Msg_Fmt: [{13}]"
+ "{0}Msg_Id: [{14}]"
+ "{0}Msg_Length: [{15}]"
+ "{0}Msg_level: [{16}]"
+ "{0}Msg_src: [{17}]"
+ "{0}Pk_number: [{18}]"
+ "{0}Pk_total: [{19}]"
+ "{0}Registered_Delivery: [{20}]"
+ "{0}Sequence_Id: [{21}]"
+ "{0}Service_Id: [{22}]"
+ "{0}Src_Id: [{23}]"
+ "{0}TP_pId: [{24}]"
+ "{0}TP_udhi: [{25}]"
+ "{0}ValId_Time: [{26}]"
, "\r\n\t\t"
, _At_Time
, _BodyLength
, String.Join(",", _Dest_terminal_Id)
, _Dest_terminal_type
, _DestUsr_tl
, _Fee_terminal_Id
, _Fee_terminal_type
, _Fee_UserType
, _FeeCode
, _FeeType
, _LinkID
, _Msg_Content
, _Msg_Fmt
, _Msg_Id
, _Msg_Length
, _Msg_level
, _Msg_src
, _Pk_number
, _Pk_total
, _Registered_Delivery
, _Sequence_Id
, _Service_Id
, _Src_Id
, _TP_pId
, _TP_udhi
, _ValId_Time
)
+ "\r\n]";
}
}
public class CMPP_SUBMIT_RESP //: CMPP_Response
{
private MessageHeader _Header;
private uint _Msg_Id;
private uint _Result;
public const int BodyLength = 8 + 4;
public uint Msg_Id
{
get
{
return _Msg_Id;
}
}
public uint Result
{
get
{
return _Result;
}
}
public MessageHeader Header
{
get
{
return _Header;
}
}
public CMPP_SUBMIT_RESP(byte[] bytes)
{
int i = 0;
byte[] buffer = new byte[MessageHeader.Length];
Buffer.BlockCopy(bytes, 0, buffer, 0, buffer.Length);
_Header = new MessageHeader(buffer);
//Msg_Id
i += MessageHeader.Length;
buffer = new byte[8];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_Msg_Id = BitConverter.ToUInt32(buffer, 0);
//Result
i += 8;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_Result = BitConverter.ToUInt32(buffer, 0);
}
public override string ToString()
{
return "[\r\n"
+ _Header.ToString() + "\r\n"
+ "\t"
+ string.Format
(
"MessageBody:"
+ "{0}Msg_Id: [{1}]"
+ "{0}Result: {2}"
, "\r\n\t\t"
, _Msg_Id
, _Result
)
+ "\r\n]";
}
}
public class CMPP_DELIVER //: CMPP_Request
{
public ulong Msg_Id
{
get
{
return _Msg_Id;
}
}
public string Dest_Id
{
get
{
return _Dest_Id;
}
}
public string Service_Id
{
get
{
return _Service_Id;
}
}
public uint TP_pid
{
get
{
return _TP_pid;
}
}
public uint TP_udhi
{
get
{
return _TP_udhi;
}
}
public uint Msg_Fmt
{
get
{
return _Msg_Fmt;
}
}
public string Src_terminal_Id
{
get
{
return _Src_terminal_Id;
}
}
public uint Src_terminal_type
{
get
{
return _Src_terminal_type;
}
}
public uint Registered_Delivery
{
get
{
return _Registered_Delivery;
}
}
public uint Msg_Length
{
get
{
return _Msg_Length;
}
}
public string Msg_Content
{
get
{
return _Msg_Content;
}
}
public string LinkId
{
get
{
return _LinkID;
}
}
private ulong _Msg_Id; // 8 Unsigned Integer 信息标识。
// 生成算法如下:
// 采用64位(8字节)的整数:
// (1)????????? 时间(格式为MMDDHHMMSS,即月日时分秒):bit64~bit39,其中
// bit64~bit61:月份的二进制表示;
// bit60~bit56:日的二进制表示;
// bit55~bit51:小时的二进制表示;
// bit50~bit45:分的二进制表示;
// bit44~bit39:秒的二进制表示;
// (2)????????? 短信网关代码:bit38~bit17,把短信网关的代码转换为整数填写到该字段中;
// (3)????????? 序列号:bit16~bit1,顺序增加,步长为1,循环使用。
// 各部分如不能填满,左补零,右对齐。
private string _Dest_Id; // 21 Octet String 目的号码。
// SP的服务代码,一般4--6位,或者是前缀为服务代码的长号码;该号码是手机用户短消息的被叫号码。
private string _Service_Id; // 10 Octet String 业务标识,是数字、字母和符号的组合。
private uint _TP_pid; // 1 Unsigned Integer GSM协议类型。详细解释请参考GSM03.40中的9.2.3.9。
private uint _TP_udhi; // 1 Unsigned Integer GSM协议类型。详细解释请参考GSM03.40中的9.2.3.23,仅使用1位,右对齐。
private uint _Msg_Fmt; // 1 Unsigned Integer 信息格式:
// 0:ASCII串;
// 3:短信写卡操作;
// 4:二进制信息;
// 8:UCS2编码;
// 15:含GB汉字。
private string _Src_terminal_Id; // 32 Octet String 源终端MSISDN号码(状态报告时填为CMPP_SUBMIT消息的目的终端号码)。
private uint _Src_terminal_type; // 1 Unsigned Integer 源终端号码类型,0:真实号码;1:伪码。
private uint _Registered_Delivery; // 1 Unsigned Integer 是否为状态报告:
// 0:非状态报告;
// 1:状态报告。
private uint _Msg_Length; // 1 Unsigned Integer 消息长度,取值大于或等于0。
private string _Msg_Content; // Msg_length Octet String 消息内容。
private string _LinkID; // 20 Octet String 点播业务使用的LinkID,非点播类业务的MT流程不使用该字段。
private MessageHeader _Header;
public MessageHeader Header
{
get
{
return _Header;
}
}
public const int FixedBodyLength = 8 // Msg_Id Unsigned Integer 信息标识。
// 生成算法如下:
// 采用64位(8字节)的整数:
// (1)????????? 时间(格式为MMDDHHMMSS,即月日时分秒):bit64~bit39,其中
// bit64~bit61:月份的二进制表示;
// bit60~bit56:日的二进制表示;
// bit55~bit51:小时的二进制表示;
// bit50~bit45:分的二进制表示;
// bit44~bit39:秒的二进制表示;
// (2)????????? 短信网关代码:bit38~bit17,把短信网关的代码转换为整数填写到该字段中;
// (3)????????? 序列号:bit16~bit1,顺序增加,步长为1,循环使用。
// 各部分如不能填满,左补零,右对齐。
+ 21 // Dest_Id Octet String 目的号码。
// SP的服务代码,一般4--6位,或者是前缀为服务代码的长号码;该号码是手机用户短消息的被叫号码。
+ 10 // Service_Id Octet String 业务标识,是数字、字母和符号的组合。
+ 1 // TP_pid Unsigned Integer GSM协议类型。详细解释请参考GSM03.40中的9.2.3.9。
+ 1 // TP_udhi Unsigned Integer GSM协议类型。详细解释请参考GSM03.40中的9.2.3.23,仅使用1位,右对齐。
+ 1 // Msg_Fmt Unsigned Integer 信息格式:
// 0:ASCII串;
// 3:短信写卡操作;
// 4:二进制信息;
// 8:UCS2编码;
// 15:含GB汉字。
+ 32 // Src_terminal_Id Octet String 源终端MSISDN号码(状态报告时填为CMPP_SUBMIT消息的目的终端号码)。
+ 1 // Src_terminal_type Unsigned Integer 源终端号码类型,0:真实号码;1:伪码。
+ 1 // Registered_Delivery Unsigned Integer 是否为状态报告:
// 0:非状态报告;
// 1:状态报告。
+ 1 // Msg_Length Unsigned Integer 消息长度,取值大于或等于0。
//Msg_length // Msg_Content Octet String 消息内容。
+ 20; // LinkID Octet String 点播业务使用的LinkID,非点播类业务的MT流程不使用该字段。
private int _BodyLength;
public int BodyLength
{
get
{
return _BodyLength;
}
}
public CMPP_DELIVER(byte[] bytes)
{
int i = 0;
byte[] buffer = new byte[MessageHeader.Length];
Buffer.BlockCopy(bytes, 0, buffer, 0, MessageHeader.Length);
_Header = new MessageHeader(buffer);
//Msg_Id 8
i += MessageHeader.Length;
buffer = new byte[8];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_Msg_Id = BitConverter.ToUInt64(buffer, 0);
string s = null;
//Dest_Id 21
i += 8;
buffer = new byte[21];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
s = Encoding.ASCII.GetString(buffer).Trim('\0');
//s = s.Substring(0, s.IndexOf('\0'));
_Dest_Id = s;
//Service_Id 20
i += 21;
buffer = new byte[10];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
s = Encoding.ASCII.GetString(buffer).Trim('\0');
//s = s.Substring(0, s.IndexOf('\0'));
_Service_Id = s;
//TP_pid 1
i += 10;
_TP_pid = (uint) bytes[i++];
_TP_udhi = (uint) bytes[i++];
_Msg_Fmt = (uint) bytes[i++];
//Src_terminal_Id 32
buffer = new byte[32];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
s = Encoding.ASCII.GetString(buffer).Trim('\0');
//s = s.Substring(0, s.IndexOf('\0'));
_Src_terminal_Id = s;
//Src_terminal_type 1
i += 32;
_Src_terminal_type = (uint) bytes[i++];
_Registered_Delivery = (uint) bytes[i++];
_Msg_Length = (uint) bytes[i++];
//Msg_Content
buffer = new byte[_Msg_Length];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
switch (_Msg_Fmt)
{
case 8 :
_Msg_Content = Encoding.BigEndianUnicode.GetString(buffer).Trim('\0');
break;
case 15 : //gb2312
_Msg_Content = Encoding.GetEncoding("gb2312").GetString(buffer).Trim('\0');
break;
case 0 : //ascii
case 3 : //短信写卡操作
case 4 : //二进制信息
default :
_Msg_Content = Encoding.ASCII.GetString(buffer).Trim('\0');
break;
}
//Linkid 20
i += (int) _Msg_Length;
buffer = new byte[20];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
s = Encoding.ASCII.GetString(buffer).Trim('\0');
//s = s.Substring(0, s.IndexOf('\0'));
_LinkID = s;
}
public byte[] ToBytes()
{
//Msg_Length Msg_Content
byte[] buf;
switch (_Msg_Fmt)
{
case 8 :
buf = Encoding.BigEndianUnicode.GetBytes(_Msg_Content);
break;
case 15 : //gb2312
buf = Encoding.GetEncoding("gb2312").GetBytes(_Msg_Content);
break;
case 0 : //ascii
case 3 : //短信写卡操作
case 4 : //二进制信息
default :
buf = Encoding.ASCII.GetBytes(_Msg_Content);
break;
}
_Msg_Length = (uint) buf.Length;
_BodyLength = FixedBodyLength + (int) _Msg_Length;
byte[] bytes = new byte[MessageHeader.Length + _BodyLength];
int i = 0;
byte[] buffer = null;
//header 12
_Header = new MessageHeader
(
(uint) (MessageHeader.Length + _BodyLength)
, CMPP_Command_Id.CMPP_DELIVER
, 0
);
//Msg_Id 8
i += MessageHeader.Length;
buffer = new byte[8];
buffer = BitConverter.GetBytes(_Msg_Id);
Array.Reverse(buffer);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length);
//Dest_Id 21
i += 8;
buffer = new byte[21];
buffer = Encoding.ASCII.GetBytes(_Dest_Id);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length);
//Service_Id 10
i += 21;
buffer = new byte[10];
buffer = Encoding.ASCII.GetBytes(_Service_Id);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length);
//TP_pid 1
i += 10;
bytes[i++] = (byte) _TP_pid;
bytes[i++] = (byte) _TP_udhi;
bytes[i++] = (byte) _Msg_Fmt;
//Src_terminal_Id 32
buffer = new byte[32];
buffer = Encoding.ASCII.GetBytes(_Src_terminal_Id);
Buffer.BlockCopy(buffer, 0, bytes, i, buffer.Length);
//Src_terminal_type 1
i += 32;
bytes[i++] = (byte) _Src_terminal_type;
bytes[i++] = (byte) _Registered_Delivery;
bytes[i++] = (byte) _Msg_Length;
//Msg_Content
Buffer.BlockCopy(buf, 0, bytes, i, buf.Length);
//LinkID
i += (int) _Msg_Length;
return bytes;
}
public override string ToString()
{
return "[\r\n"
+ _Header.ToString() + "\r\n"
+ "\t"
+ string.Format
(
"MessageBody:"
+ "{0}BodyLength: [{1}]"
+ "{0}Dest_Id: [{2}]"
+ "{0}LinkID: [{3}]"
+ "{0}Msg_Content: [{4}]"
+ "{0}Msg_Fmt: [{5}]"
+ "{0}Msg_Id: [{6}]"
+ "{0}Msg_Length: [{7}]"
+ "{0}Registered_Delivery: [{8}]"
+ "{0}Service_Id: [{9}]"
+ "{0}Src_terminal_Id: [{10}]"
+ "{0}Src_terminal_type: [{11}]"
+ "{0}TP_pid: [{12}]"
+ "{0}TP_udhi: [{13}]"
, "\r\n\t\t"
, _BodyLength
, _Dest_Id
, _LinkID
, _Msg_Content
, _Msg_Fmt
, _Msg_Id
, _Msg_Length
, _Registered_Delivery
, _Service_Id
, _Src_terminal_Id
, _Src_terminal_type
, _TP_pid
, _TP_udhi
)
+ "\r\n]";
}
}
public class CMPP_DELIVER_RESP //: CMPP_Response
{
private MessageHeader _Header;
private ulong _Msg_Id;
private uint _Result;
public const int Bodylength = 8 + 4;
public CMPP_DELIVER_RESP(ulong Msg_Id, uint Result)
{
_Msg_Id = Msg_Id;
_Result = Result;
_Header = new MessageHeader
(
MessageHeader.Length + Bodylength
, CMPP_Command_Id.CMPP_DELIVER_RESP
, 0
);
}
public byte[] ToBytes()
{
int i = 0;
byte[] bytes = new byte[MessageHeader.Length + Bodylength];
byte[] buffer = new byte[MessageHeader.Length];
//header
buffer = _Header.ToBytes();
Buffer.BlockCopy(buffer, 0, bytes, 0, buffer.Length);
i += MessageHeader.Length;
//msg_id 8
buffer = BitConverter.GetBytes(_Msg_Id);
Array.Reverse(buffer);
buffer.CopyTo(bytes, i);
//result 4
i += 8;
buffer = BitConverter.GetBytes(_Result);
Array.Reverse(buffer);
buffer.CopyTo(bytes, i);
return bytes;
}
public override string ToString()
{
return _Header.ToString() + "\r\n"
+ string.Format
(
"[\r\nMessageBody:"
+ "\r\n\tMsg_Id: {0}"
+ "\r\n\tResult: [{1}]"
+ "\r\n]"
, _Msg_Id
, _Result
);
}
}
public class CMPP_Msg_Content //状态报告
{
public const int BodyLength = 8
+ 7
+ 10
+ 10
+ 32
+ 4;
private uint _Msg_Id; // 8 Unsigned Integer 信息标识。SP提交短信(CMPP_SUBMIT)操作时,与SP相连的ISMG产生的Msg_Id。
private string _Stat; // 7 Octet String 发送短信的应答结果,含义详见表一。SP根据该字段确定CMPP_SUBMIT消息的处理状态。
private string _Submit_time; // 10 Octet String YYMMDDHHMM(YY为年的后两位00-99,MM:01-12,DD:01-31,HH:00-23,MM:00-59)。
private string _Done_time; // 10 Octet String YYMMDDHHMM。
public CMPP_Msg_Content(byte[] bytes)
{
if (bytes.Length == BodyLength)
{
int i = 0;
//_Msg_Id 8
byte[] buffer = new byte[8];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_Msg_Id = BitConverter.ToUInt32(buffer, 0);
//_Stat 7
i += 8;
buffer = new byte[7];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
_Stat = Encoding.ASCII.GetString(buffer).Trim('\0');
//_Submit_time 10
i += 7;
buffer = new byte[10];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
_Submit_time = Encoding.ASCII.GetString(buffer).Trim('\0');
//_Done_time 10
i += 10;
buffer = new byte[10];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
_Submit_time = Encoding.ASCII.GetString(buffer).Trim('\0');
//Dest_terminal_Id 32
i += 10;
buffer = new byte[32];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
_Dest_terminal_Id = Encoding.ASCII.GetString(buffer).Trim('\0');
//SMSC_sequence 4
i += 32;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_SMSC_sequence = BitConverter.ToUInt32(buffer, 0);
}
}
public uint Msg_Id
{
get
{
return _Msg_Id;
}
set
{
_Msg_Id = value;
}
}
public string Stat
{
get
{
return _Stat;
}
set
{
_Stat = value;
}
}
public string Submit_time
{
get
{
return _Submit_time;
}
set
{
_Submit_time = value;
}
}
public string Done_time
{
get
{
return _Done_time;
}
set
{
_Done_time = value;
}
}
public string Dest_terminal_Id
{
get
{
return _Dest_terminal_Id;
}
set
{
_Dest_terminal_Id = value;
}
}
public uint SMSC_sequence
{
get
{
return _SMSC_sequence;
}
set
{
_SMSC_sequence = value;
}
}
private string _Dest_terminal_Id; // 32 Octet String 目的终端MSISDN号码(SP发送CMPP_SUBMIT消息的目标终端)。
private uint _SMSC_sequence; // 4 Unsigned Integer 取自SMSC发送状态报告的消息体中的消息标识。
public override string ToString()
{
return string.Format
(
"[\r\nMessageBody:"
+ "\r\n\tBodyLength: {0}"
+ "\r\n\tDest_terminal_Id: [{1}]"
+ "\r\n\tDone_time: {2}"
+ "\r\n\tMsg_Id: [{3}]"
+ "\r\n\tSMSC_sequence: [{4}]"
+ "\r\n\tStat: [{5}]"
+ "\r\n\tSubmit_time: [{6}]"
+ "\r\n]"
, CMPP_Msg_Content.BodyLength
, _Dest_terminal_Id
, _Done_time
, _Msg_Id
, _SMSC_sequence
, _Stat
, _Submit_time
);
}
}
public class CMPP_QUERY //: CMPP_Request
{
private MessageHeader _Header;
private string _Time; // 8 Octet String 时间YYYYMMDD(精确至日)。
private uint _Query_Type; // 1 Unsigned Integer 查询类别:
// 0:总数查询;
// 1:按业务类型查询。
private string _Query_Code; // 10 Octet String 查询码。
// 当Query_Type为0时,此项无效;当Query_Type为1时,此项填写业务类型Service_Id.。
private string _Reserve; // 8 Octet String 保留。
public MessageHeader Header
{
get
{
return _Header;
}
}
public string Time
{
get
{
return _Time;
}
}
public uint Query_Type
{
get
{
return _Query_Type;
}
}
public string Query_Code
{
get
{
return _Query_Code;
}
}
public string Reserve
{
get
{
return _Reserve;
}
}
public const int BodyLength = 8 + 1 + 10 + 8;
public CMPP_QUERY
(
DateTime Time
, uint Query_Type
, string Query_Code
, string Reserve
, uint Sequence_Id
)
{
_Time = DateTimeHelper.Get_yyyyMMdd_String(Time);
_Query_Type = Query_Type;
_Query_Code = Query_Code;
_Reserve = Reserve;
_Header = new MessageHeader
(
(uint) (MessageHeader.Length + BodyLength)
, CMPP_Command_Id.CMPP_QUERY
, Sequence_Id
);
}
public byte[] ToBytes()
{
int i = 0;
byte[] bytes = new byte[MessageHeader.Length + BodyLength];
//header
byte[] buffer = new byte[MessageHeader.Length];
buffer = _Header.ToBytes();
buffer.CopyTo(bytes, 0);
//Time 8
i += MessageHeader.Length;
buffer = new byte[10];
buffer = Encoding.ASCII.GetBytes(_Time);
buffer.CopyTo(bytes, i);
//Query_Type 1
i += 8;
bytes[i++] = (byte) _Query_Type;
//Query_Code 10
buffer = new byte[10];
buffer = Encoding.ASCII.GetBytes(_Query_Code);
buffer.CopyTo(bytes, i);
//Reserve 8
i += 10;
buffer = new byte[8];
buffer = Encoding.ASCII.GetBytes(_Reserve);
buffer.CopyTo(bytes, i);
return bytes;
}
public override string ToString()
{
return "[\r\n"
+ _Header.ToString() + "\r\n"
+ "\t"
+ string.Format
(
"MessageBody:"
+ "{0}Query_Code: [{1}]"
+ "{0}Query_Type: {2}"
+ "{0}Reserve: [{3}]"
+ "{0}Time: [{4}]"
, "\r\n\t\t"
, _Query_Code
, _Query_Type
, _Reserve
, _Time
)
+ "\r\n]";
}
}
public class CMPP_QUERY_RESP
{
public MessageHeader Header
{
get
{
return _Header;
}
}
public string Time
{
get
{
return _Time;
}
}
public uint Query_Type
{
get
{
return _Query_Type;
}
}
public string Query_Code
{
get
{
return _Query_Code;
}
}
public uint Mt_TlMsg
{
get
{
return _MT_TLMsg;
}
}
public uint Mt_Tlusr
{
get
{
return _MT_Tlusr;
}
}
public uint Mt_Scs
{
get
{
return _MT_Scs;
}
}
public uint MT_WT
{
get
{
return _MT_WT;
}
}
public uint MT_FL
{
get
{
return _MT_FL;
}
}
public uint MO_Scs
{
get
{
return _MO_Scs;
}
}
public uint MO_WT
{
get
{
return _MO_WT;
}
}
public uint MO_FL
{
get
{
return _MO_FL;
}
}
private MessageHeader _Header;
private string _Time; // 8 Octet String 时间(精确至日)。
private uint _Query_Type; // 1 Unsigned Integer 查询类别:
// 0:总数查询;
// 1:按业务类型查询。
private string _Query_Code; // 10 Octet String 查询码。
private uint _MT_TLMsg; // 4 Unsigned Integer 从SP接收信息总数。
private uint _MT_Tlusr; // 4 Unsigned Integer 从SP接收用户总数。
private uint _MT_Scs; // 4 Unsigned Integer 成功转发数量。
private uint _MT_WT; // 4 Unsigned Integer 待转发数量。
private uint _MT_FL; // 4 Unsigned Integer 转发失败数量。
private uint _MO_Scs; // 4 Unsigned Integer 向SP成功送达数量。
private uint _MO_WT; // 4 Unsigned Integer 向SP待送达数量。
private uint _MO_FL; // 4 Unsigned Integer 向SP送达失败数量。
public const int BodyLength = 8 // Octet String 时间(精确至日)。
+ 1 // Unsigned Integer 查询类别:
// 0:总数查询;
// 1:按业务类型查询。
+ 10 // Octet String 查询码。
+ 4 // Unsigned Integer 从SP接收信息总数。
+ 4 // Unsigned Integer 从SP接收用户总数。
+ 4 // Unsigned Integer 成功转发数量。
+ 4 // Unsigned Integer 待转发数量。
+ 4 // Unsigned Integer 转发失败数量。
+ 4 // Unsigned Integer 向SP成功送达数量。
+ 4 // Unsigned Integer 向SP待送达数量。
+ 4; // Unsigned Integer 向SP送达失败数量。
public CMPP_QUERY_RESP(byte[] bytes)
{
int i = 0;
//header 12
byte[] buffer = new byte[MessageHeader.Length];
Buffer.BlockCopy(bytes, 0, buffer, 0, buffer.Length);
_Header = new MessageHeader(buffer);
//Time 8
i += MessageHeader.Length;
buffer = new byte[8];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
_Time = Encoding.ASCII.GetString(buffer).Trim('\0');
//Query_Type 1
i += 8;
_Query_Type = (uint) bytes[i++];
//Query_Code 10
buffer = new byte[10];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
_Query_Code = Encoding.ASCII.GetString(buffer).Trim('\0');
//MT_TLMsg 4
i += 10;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_MT_TLMsg = BitConverter.ToUInt32(buffer, 0);
//MT_Tlusr 4
i += 4;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_MT_Tlusr = BitConverter.ToUInt32(buffer, 0);
//MT_Scs 4
i += 4;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_MT_Scs = BitConverter.ToUInt32(buffer, 0);
//MT_WT 4
i += 4;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_MT_WT = BitConverter.ToUInt32(buffer, 0);
//MT_FL 4
i += 4;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_MT_FL = BitConverter.ToUInt32(buffer, 0);
//MO_Scs 4
i += 4;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_MO_Scs = BitConverter.ToUInt32(buffer, 0);
//MO_WT 4
i += 4;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_MO_WT = BitConverter.ToUInt32(buffer, 0);
//MO_FL 4
i += 4;
buffer = new byte[4];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
Array.Reverse(buffer);
_MO_FL = BitConverter.ToUInt32(buffer, 0);
}
public override string ToString()
{
return "[\r\n"
+ _Header.ToString() + "\r\n"
+ "\t"
+ string.Format
(
"MessageBody:"
+ "{0}BodyLength: [{1}]"
+ "{0}MO_FL: {2}"
+ "{0}MO_Scs: [{3}]"
+ "{0}MO_WT: [{4}]"
+ "{0}MT_FL: [{5}]"
+ "{0}MT_Scs: [{6}]"
+ "{0}MT_TLMsg: [{7}]"
+ "{0}MT_Tlusr: [{8}]"
+ "{0}MT_WT: [{9}]"
+ "{0}Query_Code: [{10}]"
+ "{0}Query_Type: [{11}]"
+ "{0}Time: [{12}]"
, "\r\n\t\t"
, CMPP_QUERY_RESP.BodyLength
, _MO_FL
, _MO_Scs
, _MO_WT
, _MT_FL
, _MT_Scs
, _MT_TLMsg
, _MT_Tlusr
, _MT_WT
, _Query_Code
, _Query_Type
, _Time
)
+ "\r\n]";
}
}
public class CMPP_ACTIVE_TEST
{
private MessageHeader _Header;
public MessageHeader Header
{
get
{
return _Header;
}
}
public CMPP_ACTIVE_TEST(uint Sequence_Id)
{
_Header = new MessageHeader
(
MessageHeader.Length
, CMPP_Command_Id.CMPP_ACTIVE_TEST
, Sequence_Id
);
}
public byte[] ToBytes()
{
return _Header.ToBytes();
}
public override string ToString()
{
return _Header.ToString();
}
}
public class CMPP_ACTIVE_TEST_RESP
{
private MessageHeader _Header;
private byte _Reserved;
public byte Reserved
{
get
{
return _Reserved;
}
}
public MessageHeader Header
{
get
{
return _Header;
}
}
public CMPP_ACTIVE_TEST_RESP(byte[] bytes)
{
int i = 0;
//header
byte[] buffer = new byte[MessageHeader.Length];
Buffer.BlockCopy(bytes, i, buffer, 0, buffer.Length);
_Header = new MessageHeader(buffer);
//Reserved 1
i += MessageHeader.Length;
_Reserved = bytes[i];
}
public byte[] ToBytes()
{
return _Header.ToBytes();
}
public override string ToString()
{
return "[\r\n"
+ _Header.ToString() + "\r\n"
+ "]";
}
}
}
//CMPP Client
namespace Microshaoft.CMPP
{
using System;
using System.Net.Sockets;
using System.Threading;
// using Microshaoft.CMPP;
using Microshaoft.CMPP.Messages;
public class MessageEventArgs : EventArgs
{
private byte[] _HeaderData;
private MessageHeader _Header;
private byte[] _BodyData;
public byte[] MessageBodyData
{
get
{
return _BodyData;
}
}
public MessageHeader Header
{
get
{
return _Header;
}
}
public byte[] MessageHeaderData
{
get
{
return _HeaderData;
}
}
public MessageEventArgs(byte[] bytes)
{
_HeaderData = new byte[MessageHeader.Length];
Buffer.BlockCopy(bytes, 0, _HeaderData, 0, MessageHeader.Length);
_Header = new MessageHeader(_HeaderData);
_BodyData = new byte[_Header.Total_Length - MessageHeader.Length];
Buffer.BlockCopy(bytes, MessageHeader.Length, _BodyData, 0, _BodyData.Length);
}
}
public class Client
{
private string _Host;
private int _Port;
private string _Source_Addr;
private string _Password;
// private TcpClient tc;
private bool _IsConnected;
public bool IsConnected
{
get
{
return _IsConnected;
}
}
// private NetworkStream _NetworkStream;
private static object _SyncLockObject = new object();
public delegate void MessageEventHandler(Client Sender, MessageEventArgs e);
//public delegate void RequestEventHandler(Client Sender, ResponseEventArgs e);
public event MessageEventHandler MessageReceive;
public event MessageEventHandler BeforeMessageSend;
public event MessageEventHandler AfterMessageSended;
private Thread _ReadResponseThread;
private void OnBeforeMessageSend(byte[] data)
{
if (BeforeMessageSend != null)
{
BeforeMessageSend(this, new MessageEventArgs(data));
}
}
private void OnAfterMessageSended(byte[] data)
{
if (AfterMessageSended != null)
{
AfterMessageSended(this, new MessageEventArgs(data));
}
}
private void SendData(byte[] data)
{
OnBeforeMessageSend(data);
lock (_SyncLockObject)
{
_Socket.Send(data);
}
OnAfterMessageSended(data);
}
public void Terminate(uint SequenceId)
{
MessageHeader terminate = new MessageHeader
(
MessageHeader.Length
, CMPP_Command_Id.CMPP_TERMINATE
, SequenceId
);
Console.WriteLine("Request:\r\n{0}", terminate.ToString());
SendData(terminate.ToBytes());
StartRun();
}
public void ActiveTest(uint SequenceId)
{
MessageHeader activeTest = new MessageHeader
(
MessageHeader.Length
, CMPP_Command_Id.CMPP_ACTIVE_TEST
, SequenceId
);
//byte[] activeTest = activeTest.ToBytes();
Console.WriteLine("Request:\r\n{0}", activeTest.ToString());
SendData(activeTest.ToBytes());
// StartRun();
}
public void DeliverResponse(ulong Msg_Id, uint Result)
{
CMPP_DELIVER_RESP response = new CMPP_DELIVER_RESP(Msg_Id, Result);
byte[] data = response.ToBytes();
//byte[] activeTest = activeTest.ToBytes();
Console.WriteLine("Request:\r\n{0}", response.ToString());
SendData(response.ToBytes());
}
public bool Connect
(
string Host
, int Port
, string UserID
, string Password
, uint SequenceId //header
, uint Version
, DateTime time
)
{
_Host = Host;
_Port = Port;
_Source_Addr = UserID;
_Password = Password;
CMPP_CONNECT connect = new CMPP_CONNECT
(
SequenceId //header
, _Source_Addr
, _Password
, Version
, time
);
Console.WriteLine("Request:\r\n{0}", connect.ToString());
if (_Socket == null)
{
_Socket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);
}
//tc = new TcpClient();
_Socket.Connect(_Host, _Port); //连接
//tc.Connect(_Host, _Port);
//_NetworkStream = tc.GetStream();
//WriteToStreamWithLock(connect.ToBytes(), _NetworkStream);
//WriteToStreamWithLock(connect.ToBytes(), _NetworkStream);
SendData(connect.ToBytes());
//_Socket.Send(connect.ToBytes());
Run(ref _IsConnected);
return _IsConnected;
}
public void Query
(
DateTime Time
, uint QueryType
, string QueryCode
, string Reserve
, uint SequenceId
)
{
CMPP_QUERY query = new CMPP_QUERY
(
Time
, QueryType
, QueryCode
, Reserve
, SequenceId
);
Console.WriteLine("Request:\r\n{0}", query.ToString());
SendData(query.ToBytes());
StartRun();
}
public void Submit
(
ulong MsgId
, uint RegisteredDelivery
, string FeeTerminalId
, string[] DestTerminalId
, string MsgContent
, uint SequenceId
)
{
//这里的字段根据需要设定
CMPP_SUBMIT submit = new CMPP_SUBMIT(SequenceId);
submit.Msg_Id = MsgId; // uint _Msg_Id; // 8 Unsigned Integer 信息标识。
submit.Pk_total = 1; // uint _Pk_total; // 1 Unsigned Integer 相同Msg_Id的信息总条数,从1开始。
submit.Pk_number = 0; // uint _Pk_number; // 1 Unsigned Integer 相同Msg_Id的信息序号,从1开始。
submit.Registered_Delivery = RegisteredDelivery; // uint _Registered_Delivery; // 1 Unsigned Integer 是否要求返回状态确认报告:
// // 0:不需要;
// // 1:需要。
submit.Msg_level = 1; // uint _Msg_level; // 1 Unsigned Integer 信息级别。
submit.Service_Id = "abcdefghij"; // string _Service_Id; // 10 Octet String 业务标识,是数字、字母和符号的组合。
submit.Fee_UserType = 3; // uint _Fee_UserType; // 1 Unsigned Integer 计费用户类型字段:
// // 0:对目的终端MSISDN计费;
// // 1:对源终端MSISDN计费;
// // 2:对SP计费;
// // 3:表示本字段无效,对谁计费参见Fee_terminal_Id字段。
submit.Fee_terminal_Id = FeeTerminalId; // string _Fee_terminal_Id; // 32 Octet String 被计费用户的号码,当Fee_UserType为3时该值有效,当Fee_UserType为0、1、2时该值无意义。
submit.Fee_terminal_type = 0; // uint _Fee_terminal_type; // 1 Unsigned Integer 被计费用户的号码类型,0:真实号码;1:伪码。
submit.TP_pId = 0; // uint _TP_pId; // 1 Unsigned Integer GSM协议类型。详细是解释请参考GSM03.40中的9.2.3.9。
submit.TP_udhi = 0; // uint _TP_udhi; // 1 Unsigned Integer GSM协议类型。详细是解释请参考GSM03.40中的9.2.3.23,仅使用1位,右对齐。
submit.Msg_Fmt = 15; // uint _Msg_Fmt; // 1 Unsigned Integer 信息格式:
// // 0:ASCII串;
// // 3:短信写卡操作;
// // 4:二进制信息;
// // 8:UCS2编码;
// // 15:含GB汉字......
submit.Msg_src = _Source_Addr; // string _Msg_src; // 6 Octet String 信息内容来源(SP_Id)。
submit.FeeType = "02"; // string _FeeType; // 2 Octet String 资费类别:
// // 01:对"计费用户号码"免费;
// // 02:对"计费用户号码"按条计信息费;
// // 03:对"计费用户号码"按包月收取信息费。
submit.FeeCode = "100"; // string _FeeCode; // 6 Octet String 资费代码(以分为单位)。
submit.ValId_Time = DateTimeHelper.Get_MMddHHmmss_String(DateTime.Now.AddHours(2))
+ "032+"; // string _ValId_Time; // 17 Octet String 存活有效期,格式遵循SMPP3.3协议。
submit.At_Time = DateTimeHelper.Get_MMddHHmmss_String(DateTime.Now) + "032+"; // string _At_Time; // 17 Octet String 定时发送时间,格式遵循SMPP3.3协议。
//spnum
submit.Src_Id = ""; // string _Src_Id; // 21 Octet String 源号码。SP的服务代码或前缀为服务代码的长号码, 网关将该号码完整的填到SMPP协议Submit_SM消息相应的source_addr字段,该号码最终在用户手机上显示为短消息的主叫号码。
submit.Dest_terminal_Id = DestTerminalId; //new string[] {"1391xxx1138", "1391xxx1137"}; // string[] _Dest_terminal_Id; // 32*DestUsr_tl Octet String 接收短信的MSISDN号码。
submit.DestUsr_tl = (uint) submit.Dest_terminal_Id.Length; // uint _DestUsr_tl; // 1 Unsigned Integer 接收信息的用户数量(小于100个用户)。
submit.Dest_terminal_type = 0; // uint _Dest_terminal_type; // 1 Unsigned Integer 接收短信的用户的号码类型,0:真实号码;1:伪码。
submit.Msg_Fmt = 15; // uint _Msg_Length; // 1 Unsigned Integer 信息长度(Msg_Fmt值为0时:<160个字节;其它<=140个字节),取值大于或等于0。
submit.Msg_Content = MsgContent; //"大家好!这是一个短信群发测试!"; // string _Msg_Content; // Msg_length Octet String 信息内容。
submit.LinkId = ""; // string _LinkID; // 20 Octet String 点播业务使用的LinkID,非点播类业务的MT流程不使用该字段。
Console.WriteLine("Request:\r\n{0}", submit.ToString());
SendData(submit.ToBytes());
}
bool _b = false;
private bool _IsStarted = false;
public void StartRun()
{
if (!_IsStarted)
{
_IsStarted = true;
if (_ReadResponseThread == null)
{
_ReadResponseThread = new Thread(new ThreadStart(Run));
}
if (_ReadResponseThread.ThreadState == ThreadState.Unstarted)
{
_ReadResponseThread.Start();
}
}
}
private void Run()
{
Run(ref _b);
}
private Socket _Socket;
private void Run(ref bool BreakFlag)
{
while (!BreakFlag)
{
//long L = _NetworkStream.Length;
byte[] buffer = SocketDataHelper.ReadDataToFixedLengthBytes(MessageHeader.Length, _Socket);
MessageHeader header = new MessageHeader(buffer);
int l = (int) header.Total_Length - MessageHeader.Length;
byte[] bytes = new byte[header.Total_Length]; //header + body
Buffer.BlockCopy(buffer, 0, bytes, 0, buffer.Length); //header
if (l > 0)
{
buffer = SocketDataHelper.ReadDataToFixedLengthBytes(l, _Socket);
Buffer.BlockCopy(buffer, 0, bytes, MessageHeader.Length, buffer.Length); //header
}
if (header.Command_Id == CMPP_Command_Id.CMPP_CONNECT_RESP)
{
CMPP_CONNECT_RESP connect_resp = new CMPP_CONNECT_RESP(bytes);
_IsConnected = (connect_resp.Status == 0);
}
else if (header.Command_Id == CMPP_Command_Id.CMPP_TERMINATE_RESP)
{
_b = true;
}
if (MessageReceive != null)
{
MessageReceive(this, new MessageEventArgs(bytes));
}
Thread.Sleep(100);
}
}
}
}
//测试程序
namespace Test
{
using System;
using System.Text;
using Microshaoft;
using Microshaoft.CMPP;
using Microshaoft.CMPP.Messages;
class ConsoleApplication
{
static void Main()
{
ConsoleApplication a = new ConsoleApplication();
Client c = new Client();
c.MessageReceive += new Client.MessageEventHandler(a.c_MessageReceive);
c.AfterMessageSended += new Client.MessageEventHandler(a.c_AfterMessageSended);
Console.WriteLine("press 'q' to exit this programe!");
uint i = 0; //Sequence_Id header
ulong l = 0; //Msg_Id body
if (c.Connect("localhost", 7891, "901234", "1234", ++i, 1, DateTime.Now))
{
if (c.IsConnected)
{
c.StartRun();
}
c.Submit
(
++l
, 1
, "1391xxx1138"
, new string[] { "13911234567" }
, "卧鼠藏虫 身披七彩祥云 脚踏金甲圣衣"
, ++i
);
c.Query(DateTimeHelper.Parse("2005-1-1"), 1, "001", "", ++i);
c.Query(DateTimeHelper.Parse("2005-1-1"), 1, "001", "", ++i);
c.ActiveTest(++i);
c.Submit
(
++l
, 1
, "1391xxx1138"
, new string[] { "13911234567" }
, "欲穷千里目 粒粒皆辛苦"
, ++i
);
}
string s;
while ((s = Console.ReadLine()) != "q")
{
if (c.IsConnected)
{
if (s.Length > 0)
{
if (s == "a")
{
c.ActiveTest(++i);
}
else
{
c.Submit
(
++l
, 1
, "1391xxx1138"
, new string[] { "13911234567", "13911234567" }
, s
, ++i
);
}
//Console.WriteLine("Request: Sequence_Id: {0},Msg_Id: [{1}], Content: \"{2}\"", i, l, s);
}
else
{
Console.WriteLine("you can submit your SMS at here,or press 'q' to exit this programe!");
}
}
}
if (c.IsConnected)
{
c.Terminate(++i);
}
Console.ReadLine();
}
private void c_MessageReceive(Client Sender, MessageEventArgs e)
{
MessageHeader header = e.Header;
//PrintHeader(header);
byte[] bytes = new byte[header.Total_Length];
header.ToBytes().CopyTo(bytes, 0);
e.MessageBodyData.CopyTo(bytes, MessageHeader.Length);
string s = "";
if (header.Command_Id == CMPP_Command_Id.CMPP_ACTIVE_TEST_RESP)
{
CMPP_ACTIVE_TEST_RESP response = new CMPP_ACTIVE_TEST_RESP(bytes);
//Console.WriteLine(response.Reserved);
s = response.ToString();
}
else if (header.Command_Id == CMPP_Command_Id.CMPP_CONNECT_RESP)
{
CMPP_CONNECT_RESP response = new CMPP_CONNECT_RESP(bytes);
s = response.ToString();
}
else if (header.Command_Id == CMPP_Command_Id.CMPP_QUERY_RESP)
{
CMPP_QUERY_RESP response = new CMPP_QUERY_RESP(bytes);
s = response.ToString();
}
else if (header.Command_Id == CMPP_Command_Id.CMPP_SUBMIT_RESP)
{
CMPP_SUBMIT_RESP response = new CMPP_SUBMIT_RESP(bytes);
s = response.ToString();
}
else if (header.Command_Id == CMPP_Command_Id.CMPP_TERMINATE_RESP)
{
s = String.Format("good bye");
}
//上行短信
else if (header.Command_Id == CMPP_Command_Id.CMPP_DELIVER)
{
CMPP_DELIVER response = new CMPP_DELIVER(bytes);
if (response.Registered_Delivery == 0) //普通短信
{
s = String.Format("收到普通短信: \n{0}", response.ToString());
}
else
//该模拟器不能自动生成状态报告再下发!请自行键入下面短信内容后,发送
//状态报告短信: 00000001DELIVRD031213505003121350501391xxx11381391xxx11381391xx11380001
{
CMPP_Msg_Content x = new CMPP_Msg_Content(Encoding.ASCII.GetBytes(response.Msg_Content));
s = x.ToString();
}
Sender.DeliverResponse(response.Msg_Id, 0);
}
ConsoleColor cc = Console.ForegroundColor;
Console.ForegroundColor = ConsoleColor.Yellow;
Console.WriteLine("Response Received:\r\n" + s + "\n");
Console.ForegroundColor = cc;
}
public void PrintHeader(MessageHeader Header)
{
Console.WriteLine("Response: Sequence_Id: {0}!", Header.Sequence_Id);
Console.WriteLine("Total_Length: {0}!", Header.Total_Length);
Console.WriteLine("Command_Id: {0}!", Header.Command_Id);
}
private void c_AfterMessageSended(Client Sender, MessageEventArgs e)
{
Console.WriteLine("Sended {0} Request!", e.Header.Command_Id);
//Console.ReadLine();
}
}
}
namespace Microshaoft
{
using System;
using System.IO;
using System.Net.Sockets;
public static class SocketDataHelper
{
public static void ReadDataToBytes
(
Socket socket,
ref byte[] buffer
)
{
int p = 0;
int l = buffer.Length;
while (p < l)
{
int r = socket.Receive
(
buffer
, p
, l - p
, SocketFlags.None
);
p += r;
}
}
public static byte[] ReadDataToFixedLengthBytes
(
int length ,
Socket socket
)
{
int p = 0;
byte[] data = new byte[length];
while (p < length)
{
int r = socket.Receive
(
data
, p
, length - p
, SocketFlags.None
);
p += r;
}
return data;
}
}
public static class StreamDataHelper
{
private static byte[] ReadDataToBytes(Stream stream)
{
byte[] buffer = new byte[64 * 1024];
MemoryStream ms = new MemoryStream();
int r = 0;
int l = 0;
long position = -1;
if (stream.CanSeek)
{
position = stream.Position;
stream.Position = 0;
}
while (true)
{
r = stream.Read(buffer, 0, buffer.Length);
if (r > 0)
{
l += r;
ms.Write(buffer, 0, r);
}
else
{
break;
}
}
byte[] bytes = new byte[l];
ms.Position = 0;
ms.Read(bytes, 0, (int) l);
ms.Close();
ms = null;
if (position >= 0)
{
stream.Position = position;
}
return bytes;
}
}
}
namespace Microshaoft
{
using System;
using System.Net.Sockets;
using System.Globalization;
public static class DateTimeHelper
{
public static string Get_MMddHHmmss_String(DateTime time)
{
return time.ToString("MMddHHmmss");
}
public static string Get_yyyyMMddHHmmss_String(DateTime time)
{
return time.ToString("yyyyMMddHHmmss");
}
public static string Get_yyyyMMdd_String(DateTime time)
{
return time.ToString("yyyyMMdd");
}
public static DateTime Parse_yyyyMMddHHmmss(string text)
{
DateTime time = DateTime.TryParseExact
(
text
, "yyyyMMddHHmmss"
, DateTimeFormatInfo.InvariantInfo
, DateTimeStyles.None
, out time
) ? time : DateTime.MinValue;
return time;
}
public static DateTime Parse_MMddHHmmss(int year, string text)
{
return Parse_yyyyMMddHHmmss(year.ToString("0000") + text);
}
public static DateTime Parse(string text)
{
DateTime time = DateTime.TryParse
(
text
, out time
) ? time : DateTime.MinValue;
return time;
}
}
}
namespace Microshaoft
{
using System;
using System.Security.Cryptography;
using System.Text;
using System.IO;
public class CryptoHelper
{
static public byte[] RSASignSHA1
(
byte[] data
, string privateKey
)
{
RSACryptoServiceProvider x = new RSACryptoServiceProvider();
x.FromXmlString(privateKey);
return x.SignHash
(
ComputeSHA1(data)
, "SHA1"
);
}
public static bool RSAVerifySHA1
(
byte[] data
, string publicKey
, byte[] signature
)
{
RSACryptoServiceProvider provider = new RSACryptoServiceProvider();
provider.FromXmlString(publicKey);
return provider.VerifyHash
(
ComputeSHA1(data)
, "SHA1"
, signature
);
}
public static byte[] RSASignMD5
(
byte[] data
, string privateKey
)
{
RSACryptoServiceProvider x = new RSACryptoServiceProvider();
x.FromXmlString(privateKey);
return x.SignHash
(
ComputeMD5(data)
, "MD5"
);
}
public static bool RSAVerifyMD5
(
byte[] data
, string publicKey
, byte[] signature
)
{
RSACryptoServiceProvider provider = new RSACryptoServiceProvider();
provider.FromXmlString(publicKey);
return provider.VerifyHash
(
ComputeMD5(data)
, "MD5"
, signature
);
}
public static byte[] RSAEncrypt
(
byte[] data
, string publicKey
, bool DoOAEPPadding
)
{
RSACryptoServiceProvider provider = new RSACryptoServiceProvider();
provider.FromXmlString(publicKey);
return provider.Encrypt(data, DoOAEPPadding);
}
public static byte[] RSADecrypt
(
byte[] data
, string privateKey
, bool DoOAEPPadding
)
{
RSACryptoServiceProvider provider = new RSACryptoServiceProvider();
provider.FromXmlString(privateKey);
return provider.Decrypt(data, DoOAEPPadding);
}
/// <summary>
/// Crypto 的摘要说明。
/// </summary>
public static byte[] TripleDESDecrypt
(
byte[] data
, byte[] Key
, byte[] IV
)
{
TripleDESCryptoServiceProvider des = new TripleDESCryptoServiceProvider();
des.Key = Key;
des.IV = IV;
return des.CreateDecryptor().TransformFinalBlock(data, 0, data.Length);
}
public static byte[] TripleDESDecrypt
(
string text
, string Base64Key
, string Base64IV
)
{
return TripleDESDecrypt
(
Convert.FromBase64String(text)
, Convert.FromBase64String(Base64Key)
, Convert.FromBase64String(Base64IV)
);
}
public static byte[] TripleDESDecrypt
(
string text
, byte[] Key
, byte[] IV
)
{
return TripleDESDecrypt
(
Convert.FromBase64String(text)
, Key
, IV
);
}
public static string TripleDESDecrypt
(
string text
, string Base64Key
, string Base64IV
, Encoding e //原文的encoding
)
{
return e.GetString
(
TripleDESDecrypt
(
text
, Base64Key
, Base64IV
)
);
}
public static string TripleDESDecrypt
(
string text
, byte[] Key
, byte[] IV
, Encoding e //原文的encoding
)
{
return e.GetString
(
TripleDESDecrypt
(
text
, Key
, IV
)
);
}
public static string GenerateTripleDESHexStringKey()
{
TripleDESCryptoServiceProvider des = new TripleDESCryptoServiceProvider();
des.GenerateKey();
return BytesArrayToHexString(des.Key);
}
public static string GenerateTripleDESHexStringIV()
{
TripleDESCryptoServiceProvider des = new TripleDESCryptoServiceProvider();
des.GenerateIV();
return BytesArrayToHexString(des.IV);
}
public static byte[] TripleDESEncrypt
(
byte[] data
, byte[] Key
, byte[] IV
)
{
TripleDESCryptoServiceProvider des = new TripleDESCryptoServiceProvider();
des.Key = Key;
des.IV = IV;
return des.CreateEncryptor().TransformFinalBlock(data, 0, data.Length);
}
public static byte[] TripleDESEncrypt
(
string text
, Encoding e
, byte[] Key
, byte[] IV
)
{
return TripleDESEncrypt
(
e.GetBytes(text)
, Key
, IV
);
}
public static byte[] TripleDESEncrypt
(
string text
, Encoding e
, string Base64Key
, string Base64IV
)
{
return TripleDESEncrypt
(
text
, e
, Convert.FromBase64String(Base64Key)
, Convert.FromBase64String(Base64IV)
);
}
public static byte[] ComputeSHA1(byte[] data)
{
return new SHA1CryptoServiceProvider().ComputeHash(data);
}
public static byte[] ComputeSHA1(string text, Encoding e)
{
return ComputeSHA1(e.GetBytes(text));
}
public static byte[] ComputeSHA1(string text)
{
return ComputeSHA1(text, Encoding.UTF8);
}
public static byte[] ComputeSHA1(Stream stream)
{
return new SHA1CryptoServiceProvider().ComputeHash(stream);
}
public static byte[] ComputeMD5(byte[] data)
{
return new MD5CryptoServiceProvider().ComputeHash(data, 0, data.Length);
}
public static byte[] ComputeMD5(string text, Encoding e)
{
return ComputeMD5(e.GetBytes(text));
}
public static byte[] ComputeMD5(string text)
{
return ComputeMD5(text, Encoding.UTF8);
}
public static byte[] ComputeMD5(Stream stream)
{
return new MD5CryptoServiceProvider().ComputeHash(stream);
}
public static string BytesArrayToHexString(byte[] data)
{
return BitConverter.ToString(data).Replace("-", "");
}
public static byte[] HexStringToBytesArray(string text)
{
text = text.Replace(" ", "");
int l = text.Length;
byte[] buffer = new byte[l / 2];
for (int i = 0; i < l; i += 2)
{
buffer[i / 2] = Convert.ToByte(text.Substring(i, 2), 16);
}
return buffer;
}
}
}
namespace Microshaoft
{
using System;
public static class IntegerHelper
{
public static int Int32Parse(string text)
{
int i = int.TryParse
(
text
, out i
) ? i : int.MinValue;
return i;
}
public static uint UInt32Parse(string text)
{
uint i = uint.TryParse
(
text
, out i
) ? i : uint.MaxValue;
return i;
}
public static short Int16Parse(string text)
{
short i = short.TryParse
(
text
, out i
) ? i : short.MinValue;
return i;
}
public static ushort UInt16Parse(string text)
{
ushort i = ushort.TryParse
(
text
, out i
) ? i : ushort.MaxValue;
return i;
}
public static long Int64Parse(string text)
{
long i = long.TryParse
(
text
, out i
) ? i : long.MinValue;
return i;
}
public static ulong UInt64Parse(string text)
{
ulong i = ulong.TryParse
(
text
, out i
) ? i : ulong.MaxValue;
return i;
}
}
}
