装包
yum -y install make automake libtool pkgconfig libaio-devel
编译安装
./autogen.sh 
./configure
make -j
make install

官网给出的安装步骤漏了./autogen.sh这步，直接./configure会报

-bash: ./configure: No such file or directory

因为netperf 是CS模式的，需要在被测试的服务器上启动netserver

[root@xxdspredb514 netperf-master]#  netserver  
Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_UNSPEC

netperf --help

[root@xxdspredb514 netperf-master]#   netperf --help
netperf: invalid option -- '-'

Usage: netperf [global options] -- [test options] 

Global options:
    -a send,recv      Set the local send,recv buffer alignment
    -A send,recv      Set the remote send,recv buffer alignment
    -B brandstr       Specify a string to be emitted with brief output
    -c [cpu_rate]     Report local CPU usage
    -C [cpu_rate]     Report remote CPU usage
    -d                Increase debugging output
    -D time,[units] * Display interim results at least every time interval
                      using units as the initial guess for units per second
                      A negative value for time will make heavy use of the
                      system's timestamping functionality
    -f G|M|K|g|m|k    Set the output units
    -F lfill[,rfill]* Pre-fill buffers with data from specified file
    -h                Display this text
    -H name|ip,fam *  Specify the target machine and/or local ip and family
    -i max,min        Specify the max and min number of iterations (15,1)
    -I lvl[,intvl]    Specify confidence level (95 or 99) (99) 
                      and confidence interval in percentage (10)
    -j                Keep additional timing statistics
    -l testlen        Specify test duration (>0 secs) (<0 bytes|trans)
    -L name|ip,fam *  Specify the local ip|name and address family
    -o send,recv      Set the local send,recv buffer offsets
    -O send,recv      Set the remote send,recv buffer offset
    -n numcpu         Set the number of processors for CPU util
    -N                Establish no control connection, do 'send' side only
    -p port,lport*    Specify netserver port number and/or local port
    -P 0|1            Don't/Do display test headers
    -r                Allow confidence to be hit on result only
    -s seconds        Wait seconds between test setup and test start
    -S                Set SO_KEEPALIVE on the data connection
    -t testname       Specify test to perform
    -T lcpu,rcpu      Request netperf/netserver be bound to local/remote cpu
    -v verbosity      Specify the verbosity level
    -W send,recv      Set the number of send,recv buffers
    -v level          Set the verbosity level (default 1, min 0)
    -V                Display the netperf version and exit
    -y local,remote   Set the socket priority
    -Y local,remote   Set the IP_TOS. Use hexadecimal.
    -Z passphrase     Set and pass to netserver a passphrase

For those options taking two parms, at least one must be specified;
specifying one value without a comma will set both parms to that
value, specifying a value with a leading comma will set just the second
parm, a value with a trailing comma will set just the first. To set
each parm to unique values, specify both and separate them with a
comma.

* For these options taking two parms, specifying one value with no comma
will only set the first parms and will leave the second at the default
value. To set the second value it must be preceded with a comma or be a
comma-separated pair. This is to retain previous netperf behaviour.

测试

[root@xxdspreapp210 mysql]#       netperf -t TCP_STREAM -H 10.237.142.206 -l 10 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.237.142.206 () port 0 AF_INET
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

 87380  16384  16384    10.03       917.66   0.29     0.94     0.210   0.668