【HDOJ2767】【Tarjan缩点】
http://acm.hdu.edu.cn/showproblem.php?pid=2767
Proving Equivalences
Time Limit: 4000/2000 MS (Java/Others) Memory Limit: 32768/32768 K (Java/Others)
Total Submission(s): 8605 Accepted Submission(s): 3063
Problem Description
Consider the following exercise, found in a generic linear algebra textbook.
Let A be an n × n matrix. Prove that the following statements are equivalent:
1. A is invertible.
2. Ax = b has exactly one solution for every n × 1 matrix b.
3. Ax = b is consistent for every n × 1 matrix b.
4. Ax = 0 has only the trivial solution x = 0.
The typical way to solve such an exercise is to show a series of implications. For instance, one can proceed by showing that (a) implies (b), that (b) implies (c), that (c) implies (d), and finally that (d) implies (a). These four implications show that the four statements are equivalent.
Another way would be to show that (a) is equivalent to (b) (by proving that (a) implies (b) and that (b) implies (a)), that (b) is equivalent to (c), and that (c) is equivalent to (d). However, this way requires proving six implications, which is clearly a lot more work than just proving four implications!
I have been given some similar tasks, and have already started proving some implications. Now I wonder, how many more implications do I have to prove? Can you help me determine this?
Let A be an n × n matrix. Prove that the following statements are equivalent:
1. A is invertible.
2. Ax = b has exactly one solution for every n × 1 matrix b.
3. Ax = b is consistent for every n × 1 matrix b.
4. Ax = 0 has only the trivial solution x = 0.
The typical way to solve such an exercise is to show a series of implications. For instance, one can proceed by showing that (a) implies (b), that (b) implies (c), that (c) implies (d), and finally that (d) implies (a). These four implications show that the four statements are equivalent.
Another way would be to show that (a) is equivalent to (b) (by proving that (a) implies (b) and that (b) implies (a)), that (b) is equivalent to (c), and that (c) is equivalent to (d). However, this way requires proving six implications, which is clearly a lot more work than just proving four implications!
I have been given some similar tasks, and have already started proving some implications. Now I wonder, how many more implications do I have to prove? Can you help me determine this?
Input
On the first line one positive number: the number of testcases, at most 100. After that per testcase:
* One line containing two integers n (1 ≤ n ≤ 20000) and m (0 ≤ m ≤ 50000): the number of statements and the number of implications that have already been proved.
* m lines with two integers s1 and s2 (1 ≤ s1, s2 ≤ n and s1 ≠ s2) each, indicating that it has been proved that statement s1 implies statement s2.
Output
Per testcase:
* One line with the minimum number of additional implications that need to be proved in order to prove that all statements are equivalent.
* One line with the minimum number of additional implications that need to be proved in order to prove that all statements are equivalent.
Sample Input
2
4 0
3 2
1 2
1 3
Sample Output
4
2
题目大意：给一个有向图，问至少加几条边能使图成为强连通图。
题目分析：先用Tarjan缩点，然后统计每个强连通分量的入度与出度，统计入度为0的强连通分量的个数以及出度为0的强连通分量的个数，求两个数的最大值即可
【PS：注意强连通分量为1个时应进行特判，因为他的入度和出度都为0，但是不用加边就已经是强连通图了】
1 //Wannafly挑战赛14 C https://www.nowcoder.com/acm/contest/81/C 2 #include<iostream> 3 #include<cstring> 4 #include<algorithm> 5 #include<queue> 6 #include<stack> 7 #include<vector> 8 using namespace std; 9 const int maxn=100005; 10 struct edge{ 11 int from; 12 int to; 13 int next; 14 }EDGE[maxn]; 15 vector<int>vc[maxn]; 16 int head[maxn],dfn[maxn],vis[maxn],low[maxn],col[maxn],in[maxn],out[maxn],en[maxn],stk[maxn];//各个变量的意义可参照上篇博客 17 int edge_cnt=1,tot1=0,tot2=0,scc_cnt=0,tot0=0; 18 void add(int x,int y) 19 { 20 EDGE[edge_cnt].from=x; 21 EDGE[edge_cnt].to=y; 22 EDGE[edge_cnt].next=head[x]; 23 head[x]=edge_cnt++; 24 } 25 void Tarjan(int u) 26 { 27 low[u]=dfn[u]=++tot1;//注意tot1的初值必须是1【因为dfn必须为正数】，所以这里使用++tot1而不用tot1++; 28 vis[u]=1; 29 stk[++tot2]=u; 30 for(int i = head[u]; i != -1 ; i = EDGE[i].next) 31 { 32 if(!dfn[EDGE[i].to]){ 33 Tarjan(EDGE[i].to); 34 low[u]=min(low[u],low[EDGE[i].to]); 35 } 36 else if(vis[EDGE[i].to]){ 37 low[u]=min(low[u],low[EDGE[i].to]); 38 } 39 } 40 if(low[u]==dfn[u]){ 41 int xx; 42 scc_cnt++; 43 do{ 44 xx=stk[tot2--]; 45 vc[scc_cnt].push_back(xx); 46 col[xx]=scc_cnt; 47 vis[xx]=0; 48 }while(xx!=u); 49 } 50 } 51 int main() 52 { 53 int t; 54 scanf("%d",&t); 55 while(t--) 56 { 57 edge_cnt=0,tot1=0,tot2=0,scc_cnt=0,tot0=0; 58 scc_cnt=0; 59 int n,m; 60 scanf("%d%d",&n,&m); 61 memset(head,-1,sizeof(head)); 62 memset(stk,0,sizeof(stk)); 63 memset(in,0,sizeof(in)); 64 memset(out,0,sizeof(out)); 65 memset(dfn,0,sizeof(dfn)); 66 memset(low,0,sizeof(low)); 67 memset(col,0,sizeof(col)); 68 while(m--) 69 { 70 int a,b; 71 scanf("%d%d",&a,&b); 72 add(a,b); 73 } 74 for(int i = 1 ; i <= n; i++) 75 { 76 if(!dfn[i])Tarjan(i); 77 } 78 for(int i = 0 ; i < edge_cnt ; i++) 79 { 80 if(col[EDGE[i].from]!=col[EDGE[i].to]) 81 { 82 in[col[EDGE[i].to]]++;//缩点 83 out[col[EDGE[i].from]]++; 84 } 85 } 86 int sum1=0,sum2=0; 87 for(int i = 1 ; i <= scc_cnt ; i++) 88 { 89 if(!in[i]) 90 sum1++; 91 if(!out[i]) 92 sum2++; 93 } 94 int mmax=max(sum1,sum2); 95 if(scc_cnt!=1) 96 cout << mmax << endl; 97 else 98 cout << "0" <<endl; 99 for(int i = 1 ; i <= scc_cnt ; i++) 100 vc[i].clear(); 101 } 102 return 0; 103 } 104 /*4 5 105 1 3 106 2 4 107 4 2 108 1 4 109 2 1*/
