Arduino重置-复位问题
转自: https://blog.csdn.net/y511374875/article/details/77845240
三种方式手动重启Arduino
1.Arduino板上重新编写代码时,Arduino将重新设置 2.Arduino软件中打开串行终端,同时将Arduino板连接到计算机。打开串行终端时,Arduino会自动重置 3.按下复位按钮
两种方式自动重启Arduino
详情见: https://www.theengineeringprojects.com/2015/10/upload-bootloader-atmega328.html
1.使用Arduino板上的RESET引脚以编程方式重新设置Arduino,就是利用一个数字口,代码运行到那的时候就将REST置低 这里利用数字口D2
int Reset = 2;
void setup() { digitalWrite(Reset, HIGH); delay(200); pinMode(Reset, OUTPUT); Serial.begin(9600); Serial.println("How to Reset Arduino Programmatically"); delay(200); }
void loop() { Serial.println("A"); delay(1000); Serial.println("B"); delay(1000); Serial.println("Now we are Resetting Arduino Programmatically"); Serial.println(); delay(1000); digitalWrite(Reset, LOW); Serial.println("Arduino will never reach there.");
}1234567891011121314151617181920212223
2.不使用任何硬件引脚,Arduino有一个名为resetFunc()的内置函数,我们声明函数地址为0,当我们执行此功能时,Arduino将自动重置。
说明: –In this method, we are not gonna use any hardware pin, instead we will do everything in programming. –Arduino has a builtin function named as resetFunc() which we need to declare at address 0 and when we execute this function Arduino gets reset automatically. –So, no need of doing anything in hardware and simply upload the below code in your Arduino board.
void(* resetFunc) (void) = 0;
void setup() { Serial.begin(9600); Serial.println("How to Reset Arduino Programmatically"); delay(200); }
void loop() { Serial.println("A"); delay(1000); Serial.println("B"); delay(1000); Serial.println("Now we are Resetting Arduino Programmatically"); Serial.println(); delay(1000); resetFunc(); Serial.println("Arrduino will never reach there.");
} --------------------- 作者:y511374875 来源:CSDN 原文:https://blog.csdn.net/y511374875/article/details/77845240 版权声明:本文为博主原创文章,转载请附上博文链接!