高可用,多路冗余GFS2集群文件系统搭建详解
实验拓扑图:
实验原理:
实验目的:通过RHCS集群套件搭建GFS2集群文件系统,保证不同节点能够同时对GFS2集群文件系统进行读取和写入,其次通过multipath实现node和FC,FC和Share Storage之间的多路冗余,最后实现存储的mirror复制达到高可用。
GFS2:全局文件系统第二版,GFS2是应用最广泛的集群文件系统。它是由红帽公司开发出来的,允许所有集群节点并行访问。元数据通常会保存在共享存储设备或复制存储设备的一个分区里或逻辑卷中。
实验环境:
1
2
3
4
5
6
7
8
|
[root@storage1 ~] # uname -r 2.6.32-279.el6.x86_64 [root@storage1 ~] # cat /etc/redhat-release Red Hat Enterprise Linux Server release 6.3 (Santiago) [root@storage1 ~] # /etc/rc.d/init.d/iptables status iptables: Firewall is not running. [root@storage1 ~] # getenforce Disabled |
实验步骤:
1、前期准备工作
0)、设置一台管理端(192.168.100.102manager.rsyslog.org)配置ssh 私钥、公钥,将公钥传递到所有节点上
1
2
3
4
5
6
7
8
9
10
11
12
13
14
|
[root@manager ~] # ssh-keygen \\生成公钥和私钥 Generating public /private rsa key pair. Enter file in which to save the key ( /root/ . ssh /id_rsa ): Enter passphrase (empty for no passphrase): …… [root@manager ~] # for i in {1..6}; do ssh-copy-id -i 192.168.100.17$i; done \\将公钥传输到各节点/root/.ssh/目录下 root@192.168.100.171's password: Now try logging into the machine, with "ssh '192.168.100.171'" , and check in : . ssh /authorized_keys to make sure we haven 't added extra keys that you weren' t expecting ..…… [root@manager ~] # ssh node1 \\测试登录 Last login: Sat Jun 8 17:58:51 2013 from 192.168.100.31 [root@node1 ~] # |
1)、配置双网卡IP,所有节点参考拓扑图配置双网卡,并配置相应IP即可
1
2
3
4
5
|
[root@storage1 ~] # ifconfig eth0 | grep "inet addr" | awk -F[:" "]+ '{ print $4 }' 192.168.100.171 [root@storage1 ~] # ifconfig eth1 | grep "inet addr" | awk -F[:" "]+ '{ print $4 }' 192.168.200.171 …… |
2)、配置hosts文件并同步到所有节点去(也可以配置DNS,不过DNS解析绝对不会有hosts解析快,其次DNS服务器出问题会直接导致节点和节点以及和存储直接不能够解析而崩溃)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
|
[root@manager ~] # cat /etc/hosts 127.0.0.1 localhost localhost.rsyslog.org 192.168.100.102 manager manager.rsyslog.org 192.168.100.171 storage1 storage1.rsyslog.org 192.168.200.171 storage1 storage1.rsyslog.org 192.168.100.172 storage2 storage2.rsyslog.org 192.168.200.172 storage2 storage2.rsyslog.org 192.168.100.173 node1 node1.rsyslog.org 192.168.200.173 node1 node1.rsyslog.org 192.168.100.174 node2 node2.rsyslog.org 192.168.200.174 node2 node2.rsyslog.org 192.168.100.175 node3 node3.rsyslog.org 192.168.200.175 node3 node3.rsyslog.org 192.168.100.176 node4 node4.rsyslog.org 192.168.200.176 node4 node4.rsyslog.org [root@manager ~] # for i in {1..6}; do scp /etc/hosts 192.168.100.17$i:/etc/ ; done hosts 100% 591 0.6KB /s 00:00 hosts 100% 591 0.6KB /s 00:00 hosts 100% 591 0.6KB /s 00:00 hosts 100% 591 0.6KB /s 00:00 hosts 100% 591 0.6KB /s 00:00 hosts 100% 591 0.6KB /s 00:00 |
3)、配置yum源(将所有节点光盘挂接到/media/cdrom,如果不方便,也可以做NFS,将镜像挂载到NFS里面,然后节点挂载到NFS共享目录中即可,注意:不同版本的系统,RHCS集群套件存放位置会有所不同,所以yum源的指向位置也会有所不同)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
|
[root@manager ~] # cat /etc/yum.repos.d/rhel-gfs2.repo [rhel-cdrom] name=RHEL6U3-cdrom baseurl= file : ///media/cdrom enabled=1 gpgcheck=0 [rhel-cdrom-HighAvailability] name=RHEL6U3-HighAvailability baseurl= file : ///media/cdrom/HighAvailability enabled=1 gpgcheck=0 [rhel-cdrom-ResilientStorage] name=RHEL6U3-ResilientStorage baseurl= file : ///media/cdrom/ResilientStorage enabled=1 gpgcheck=0 [rhel-cdrom-LoadBalancer] name=RHEL6U3-LoadBalancer baseurl= file : ///media/cdrom/LoadBalancer enabled=1 gpgcheck=0 [rhel-cdrom-ScalableFileSystem] name=RHEL6U3-ScalableFileSystem baseurl= file : ///media/cdrom/ScalableFileSystem enabled=1 gpgcheck=0 [root@manager ~] # for i in {1..6}; do scp /etc/yum.repos.d/rhel-gfs2.repo 192.168.100.17$i:/etc/yum.repos.d ; done rhel-gfs2.repo 100% 588 0.6KB /s 00:00 rhel-gfs2.repo 100% 588 0.6KB /s 00:00 rhel-gfs2.repo 100% 588 0.6KB /s 00:00 rhel-gfs2.repo 100% 588 0.6KB /s 00:00 rhel-gfs2.repo 100% 588 0.6KB /s 00:00 rhel-gfs2.repo 100% 588 0.6KB /s 00:00 [root@manager ~] # for i in {1..6}; do ssh 192.168.100.17$i "yum clean all && yum makecache"; done Loaded plugins: product- id , security, subscription-manager Updating certificate-based repositories. Unable to read consumer identity …… |
4)、时间要同步,可以考虑配置NTP时间服务器,如果联网可以考虑同步互联网时间,当然也可以通过date命令设置相同时间。
2、安装luci和ricci(管理端安装luci,节点安装ricci)
Luci是运行WEB样式的Conga服务器端,它可以通过web界面很容易管理整个RHCS集群,每一步操作都会在/etc/cluster/cluster.conf生成相应的配置信息
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
|
[root@manager ~] # yum install luci –y [root@manager ~] # /etc/rc.d/init.d/luci start \\生成以下信息,说明配置成功,注意:安装luci会安装很多python包,python包尽量采用光盘自带的包,否则启动luci会出现报错现象。 Adding following auto-detected host IDs (IP addresses /domain names), corresponding to `manager.rsyslog.org ' address, to the configuration of self-managed certificate `/var/lib/luci/etc/cacert.config' (you can change them by editing ` /var/lib/luci/etc/cacert .config ', removing the generated certificate `/var/lib/luci/certs/host.pem' and restarting luci): (none suitable found, you can still do it manually as mentioned above) Generating a 2048 bit RSA private key writing new private key to '/var/lib/luci/certs/host.pem' 正在启动 saslauthd: [确定] Start luci... [确定] Point your web browser to https: //manager .rsyslog.org:8084 (or equivalent) to access luci [root@manager ~] # for i in {1..4}; do ssh node$i "yum install ricci -y"; done [root@manager ~] # for i in {1..4}; do ssh node$i "chkconfig ricci on && /etc/rc.d/init.d/ricci start"; done [root@manager ~] # for i in {1..4}; do ssh node$i "echo '123.com' | passwd ricci --stdin"; done \\ricci设置密码,在Conga web页面添加节点的时候需要输入ricci密码。 更改用户 ricci 的密码 。 passwd : 所有的身份验证令牌已经成功更新。 …… |
3、通过luci web管理界面安装RHCS集群套件
https://manager.rsyslog.org:8084或者https://192.168.100.102:8084
添加节点node1-node3,先设置3个,后期在增加一个节点,password为各节点ricci的密码,然后勾选“Download Packages”(在各节点yum配置好的基础上,自动安装cman和rgmanager及相关的依赖包),勾选“Enable Shared Storage Support”,安装存储相关的包,并支持gfs2文件系统、DLM锁、clvm逻辑卷等。
安装过程如下:
以下为安装完成之后,所有节点状态
点开一个节点,可以看到这个节点上所有相关服务都处于运行状态。
登录任意一个节点查看各服务的开机启动情况,为2-5级别自动启动。
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
|
[root@manager ~] # ssh node1 "chkconfig --list | grep cman" cman 0:关闭 1:关闭 2:启用 3:启用 4:启用 5:启用 6:关闭 [root@manager ~] # ssh node1 "chkconfig --list | grep rgmanager" rgmanager 0:关闭 1:关闭 2:启用 3:启用 4:启用 5:启用 6:关闭 [root@manager ~] # ssh node1 "chkconfig --list | grep clvmd" clvmd 0:关闭 1:关闭 2:启用 3:启用 4:启用 5:启用 6:关闭 [root@node2 ~] # cat /etc/cluster/cluster.conf \\查看各节点集群配置信息,各节点这部分必须一样。 <?xml version= "1.0" ?> <cluster config_version= "1" name= "rsyslog" > <clusternodes> <clusternode name= "node1" nodeid= "1" /> <clusternode name= "node2" nodeid= "2" /> < /clusternodes > <cman expected_votes= "1" two_node= "1" /> <fencedevices/> < rm /> < /cluster > [root@node2 ~] # clustat \\查看集群节点状态(可以通过 cluster -i 1 动态查看变化状态) Cluster Status for rsyslog @ Sat Jun 8 00:03:40 2013 Member Status: Quorate Member Name ID Status ------ ---- ---- ------ node1 1 Online node2 2 Online, Local node3 3 Online |
4、安装存储管理管理软件,并导出磁
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
|
[root@storage1 ~] # fdisk /dev/sda \\创建一个大小为2G的逻辑分区并导出 Command (m for help): n Command action e extended p primary partition (1-4) e Selected partition 4 First cylinder (1562-2610, default 1562): Using default value 1562 Last cylinder, +cylinders or +size{K,M,G} (1562-2610, default 2610): +4G Command (m for help): n First cylinder (1562-2084, default 1562): Using default value 1562 Last cylinder, +cylinders or +size{K,M,G} (1562-2084, default 2084): +2G Command (m for help): w …… [root@storage1 ~] # partx -a /dev/sda [root@storage1 ~] # ll /dev/sda sda sda1 sda2 sda3 sda4 sda5 [root@storage1 ~] # yum install scsi-target-utils –y \\安装target管理端 [root@storage1 ~] # vim /etc/tgt/targets.conf \\配置导出磁盘的信息 <target iqn.2013.05.org.rsyslog:storage1.sda5> <backing-store /dev/sda5 > scsi_id storage1_id scsi_sn storage1_sn < /backing-store > incominguser xiaonuo 081ac67e74a6bb13b7a22b8a89e7177b \\设置用户名及密码访问 initiator-address 192.168.100.173 \\设置允许的IP地址 initiator-address 192.168.100.174 initiator-address 192.168.100.175 initiator-address 192.168.100.176 initiator-address 192.168.200.173 initiator-address 192.168.200.174 initiator-address 192.168.200.175 initiator-address 192.168.200.176 < /target > [root@storage1 ~] # /etc/rc.d/init.d/tgtd start && chkconfig tgtd on [root@storage1 ~] # tgtadm --lld iscsi --mode target --op show \\查看是否导出成功 Target 1: iqn.2013.05.org.rsyslog:storage1.sda5 …… LUN: 1 Type: disk SCSI ID: storage1_id SCSI SN: storage1_sn Size: 2151 MB, Block size: 512 Online: Yes Removable media: No Prevent removal: No Readonly: No Backing store type : rdwr Backing store path: /dev/sda5 Backing store flags: Account information: xiaonuo ACL information: 192.168.100.173 192.168.100.174 192.168.100.175 192.168.100.176 192.168.200.173 192.168.200.174 192.168.200.175 192.168.200.176 [root@manager ~] # for i in {1..3}; do ssh node$i "yum -y install iscsi-initiator-utils"; done \\节点安装iscsi客户端软件 [root@node1 ~] # vim /etc/iscsi/iscsid.conf \\所有节点配置文件加上以下3行,设置账户密码 node.session.auth.authmethod = CHAP node.session.auth.username = xiaonuo node.session.auth.password = 081ac67e74a6bb13b7a22b8a89e7177b [root@manager ~] # for i in {1..3}; do ssh node$i "iscsiadm -m discovery -t st -p 192.168.100.171"; done \\发现共享设备 192.168.100.171:3260,1 iqn.2013.05.org.rsyslog:storage1.sda5 192.168.100.171:3260,1 iqn.2013.05.org.rsyslog:storage1.sda5 192.168.100.171:3260,1 iqn.2013.05.org.rsyslog:storage1.sda5 [root@manager ~] # for i in {1..3}; do ssh node$i "iscsiadm -m discovery -t st -p 192.168.200.171"; done 192.168.200.171:3260,1 iqn.2013.05.org.rsyslog:storage1.sda5 192.168.200.171:3260,1 iqn.2013.05.org.rsyslog:storage1.sda5 192.168.200.171:3260,1 iqn.2013.05.org.rsyslog:storage1.sda5 [root@manager ~] # for i in {1..3}; do ssh node$i "iscsiadm -m node -l"; done \\注册iscsi共享设备 Logging in to [iface: default, target: iqn.2013.05.org.rsyslog:storage1.sda5, portal: 192.168.200.171,3260] (multiple) Logging in to [iface: default, target: iqn.2013.05.org.rsyslog:storage1.sda5, portal: 192.168.100.171,3260] (multiple) Login to [iface: default, target: iqn.2013.05.org.rsyslog:storage1.sda5, portal: 192.168.200.171,3260] successful. Login to [iface: default, target: iqn.2013.05.org.rsyslog:storage1.sda5, portal: 192.168.100.171,3260] successful. …… [root@storage1 ~] # tgtadm --lld iscsi --op show --mode conn --tid 1 \\iscsi服务器端查看共享情况 Session: 12 Connection: 0 Initiator: iqn.1994-05.com.redhat:a12e282371a1 IP Address: 192.168.200.175 Session: 11 Connection: 0 Initiator: iqn.1994-05.com.redhat:a12e282371a1 IP Address: 192.168.100.175 ……. [root@node1 ~] # netstat -nlatp | grep 3260 tcp 0 0 192.168.200.173:37946 192.168.200.171:3260 ESTABLISHED 37565 /iscsid tcp 0 0 192.168.100.173:54306 192.168.100.171:3260 ESTABLISHED 37565 /iscsid [root@node1 ~] # ll /dev/sd \\在各个节点上面都会多出两个iscsi设备 sda sda1 sda2 sda3 sdb sdc |
5、安装配置multipath多路冗余实现线路冗余
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
|
[root@manager ~] # for i in {1..3}; do ssh node$i "yum -y install device-mapper-*"; done [root@manager ~] # for i in {1..3}; do ssh node$i "mpathconf --enable"; done \\生成配置文件 [root@node1 ~] # /sbin/scsi_id -g -u /dev/sdb \\查看导入设备的WWID 1storage1_id [root@node1 ~] # /sbin/scsi_id -g -u /dev/sdc 1storage1_id [root@node1 ~] # vim /etc/multipath.conf multipaths { multipath { wwid 1storage1_id \\设置导出设备的WWID alias iscsi1 \\设置别名 path_grouping_policy multibus path_selector "round-robin 0" failback manual rr_weight priorities no_path_retry 5 } } [root@node1 ~] # /etc/rc.d/init.d/multipathd start Starting multipathd daemon: [ OK ] [root@node1 ~] # ll /dev/mapper/iscsi1 lrwxrwxrwx 1 root root 7 Jun 7 23:58 /dev/mapper/iscsi1 -> .. /dm-0 [root@node1 ~] # multipath –ll \\查看绑定是否成功 iscsi1 (1storage1_id) dm-0 IET,VIRTUAL-DISK size=2.0G features= '1 queue_if_no_path' hwhandler= '0' wp=rw `-+- policy= 'round-robin 0' prio=1 status=active |- 20:0:0:1 sdb 8:16 active ready running `- 19:0:0:1 sdc 8:32 active ready running ……\\其他两个节点同上 |
6、在节点上创建clvm逻辑卷并创建gfs2集群文件系统
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
|
[root@node1 ~] # pvcreate /dev/mapper/iscsi1 \\将多路冗余设备创建成pv Writing physical volume data to disk "/dev/mapper/iscsi1" Physical volume "/dev/mapper/iscsi1" successfully created [root@node1 ~] # vgcreate cvg0 /dev/mapper/iscsi1 \\创建vg Clustered volume group "cvg0" successfully created [root@node1 ~] # lvcreate -L +1G cvg0 -n clv0 \\创建大小为1G的lv Logical volume "clv0" created [root@node1 ~] # lvs \\从node1查看lv情况 LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 -wi-a--- 1.00g [root@node2 ~] # lvs \\从node2查看lv情况 LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 -wi-a--- 1.00g [root@manager ~] # for i in {1..3}; do ssh node$i "lvmconf --enable-cluster"; done \\打开DLM锁机制,在web配置时候,如果勾选了“Enable Shared Storage Support”,则默认就打开了。 [root@node2 ~] # mkfs.gfs2 -j 3 -p lock_dlm -t rsyslog:web /dev/cvg0/clv0 \\创建gfs2集群文件系统,并设置节点为3个,锁协议为lock_dlm This will destroy any data on /dev/cvg0/clv0 . It appears to contain: symbolic link to `.. /dm-1 ' Are you sure you want to proceed? [y /n ] y Device: /dev/cvg0/clv0 Blocksize: 4096 Device Size 1.00 GB (262144 blocks) Filesystem Size: 1.00 GB (262142 blocks) Journals: 3 Resource Groups: 4 Locking Protocol: "lock_dlm" Lock Table: "rsyslog:web" UUID: 7c293387-b59a-1105-cb26-4ffc41b5ae3b |
7、在storage2上创建storage1的mirror,实现备份及高可用
1)、创建跟storage1一样大的iscs空间2G,并配置targets.conf
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
|
[root@storage2 ~] # vim /etc/tgt/targets.conf <target iqn.2013.05.org.rsyslog:storage2.sda5> <backing-store /dev/sda5 > scsi_id storage2_id scsi_sn storage2_sn < /backing-store > incominguser xiaonuo 081ac67e74a6bb13b7a22b8a89e7177b initiator-address 192.168.100.173 initiator-address 192.168.100.174 initiator-address 192.168.100.175 initiator-address 192.168.100.176 initiator-address 192.168.200.173 initiator-address 192.168.200.174 initiator-address 192.168.200.175 initiator-address 192.168.200.176 < /target > |
2)、各节点导入storage1设备
1
2
3
4
5
6
7
8
9
10
11
12
13
14
|
[root@manager ~] # for i in {1..3}; do ssh node$i "iscsiadm -m discovery -t st -p 192.168.100.172"; done 192.168.100.172:3260,1 iqn.2013.05.org.rsyslog:storage2.sda5 192.168.100.172:3260,1 iqn.2013.05.org.rsyslog:storage2.sda5 192.168.100.172:3260,1 iqn.2013.05.org.rsyslog:storage2.sda5 [root@manager ~] # for i in {1..3}; do ssh node$i "iscsiadm -m discovery -t st -p 192.168.200.172"; done 192.168.200.172:3260,1 iqn.2013.05.org.rsyslog:storage2.sda5 192.168.200.172:3260,1 iqn.2013.05.org.rsyslog:storage2.sda5 192.168.200.172:3260,1 iqn.2013.05.org.rsyslog:storage2.sda5 [root@manager ~] # for i in {1..3}; do ssh node$i "iscsiadm -m node -l"; done Logging in to [iface: default, target: iqn.2013.05.org.rsyslog:storage2.sda5, portal: 192.168.100.172,3260] (multiple) Logging in to [iface: default, target: iqn.2013.05.org.rsyslog:storage2.sda5, portal: 192.168.200.172,3260] (multiple) Login to [iface: default, target: iqn.2013.05.org.rsyslog:storage2.sda5, portal: 192.168.100.172,3260] successful. Login to [iface: default, target: iqn.2013.05.org.rsyslog:storage2.sda5, portal: 192.168.200.172,3260] successful. …… |
3)、设置multipath
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
|
[root@node1 ~] # ll /dev/sd sda sda1 sda2 sda3 sdb sdc sdd sde [root@node1 ~] # /sbin/scsi_id -g -u /dev/sdd 1storage2_id [root@node1 ~] # /sbin/scsi_id -g -u /dev/sde 1storage2_id [root@node1 ~] # vim /etc/multipath.conf \\其它两个节点配置类同 multipaths { multipath { wwid 1storage1_id alias iscsi1 path_grouping_policy multibus path_selector "round-robin 0" failback manual rr_weight priorities no_path_retry 5 } multipath { wwid 1storage2_id alias iscsi2 path_grouping_policy multibus path_selector "round-robin 0" failback manual rr_weight priorities no_path_retry 5 } } [root@node1 ~] # /etc/rc.d/init.d/multipathd reload Reloading multipathd: [ OK ] [root@node1 ~] # multipath -ll iscsi2 (1storage2_id) dm-2 IET,VIRTUAL-DISK size=2.0G features= '1 queue_if_no_path' hwhandler= '0' wp=rw |-+- policy= 'round-robin 0' prio=1 status=active | `- 21:0:0:1 sde 8:64 active ready running `-+- policy= 'round-robin 0' prio=1 status=enabled `- 22:0:0:1 sdd 8:48 active ready running iscsi1 (1storage1_id) dm-0 IET,VIRTUAL-DISK size=2.0G features= '1 queue_if_no_path' hwhandler= '0' wp=rw `-+- policy= 'round-robin 0' prio=1 status=active |- 20:0:0:1 sdb 8:16 active ready running `- 19:0:0:1 sdc 8:32 active ready running 4)、将新的iscsi设备加入卷组cvg0。 [root@node3 ~] # pvcreate /dev/mapper/iscsi2 Writing physical volume data to disk "/dev/mapper/iscsi2" Physical volume "/dev/mapper/iscsi2" successfully created [root@node3 ~] # vgextend cvg0 /dev/mapper/iscsi2 Volume group "cvg0" successfully extended [root@node3 ~] # vgs VG #PV #LV #SN Attr VSize VFree cvg0 2 1 0 wz--nc 4.00g 3.00g |
5)、安装cmirror,并在节点创建stoarge1的mirror为stoarage2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
|
[root@manager ~] # for i in {1..3}; do ssh node$i "yum install cmirror -y"; done [root@manager ~] # for i in {1..3}; do ssh node$i "/etc/rc.d/init.d/cmirrord start && chkconfig cmirrord on"; done [root@node3 ~] # dmsetup ls –tree \\没有创建mirror之前的状况 iscsi2 (253:2) ├─ (8:48) └─ (8:64) cvg0-clv0 (253:1) └─iscsi1 (253:0) ├─ (8:32) └─ (8:16) [root@node3 ~] # lvs \\没有创建mirror之前的状况 LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 -wi-a--- 1.00g [root@node3 ~] # lvconvert -m 1 /dev/cvg0/clv0 /dev/mapper/iscsi1 /dev/mapper/iscsi2 \\创建先有lv的mirror,以下可以看到数据在复制 cvg0 /clv0 : Converted: 0.4% cvg0 /clv0 : Converted: 10.9% cvg0 /clv0 : Converted: 18.4% cvg0 /clv0 : Converted: 28.1% cvg0 /clv0 : Converted: 42.6% cvg0 /clv0 : Converted: 56.6% cvg0 /clv0 : Converted: 70.3% cvg0 /clv0 : Converted: 85.9% cvg0 /clv0 : Converted: 100.0% [root@node2 ~] # lvs \\创建过程中,storage1中的clv0正在想storage2复制相同内容 LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 mwi-a-m- 1.00g clv0_mlog 6.64 [root@node2 ~] # lvs LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 mwi-a-m- 1.00g clv0_mlog 100.00 [root@node3 ~] # dmsetup ls –tree \\查看现有iscsi导出设备的状态为mirror型 cvg0-clv0 (253:1) ├─cvg0-clv0_mimage_1 (253:5) │ └─iscsi2 (253:2) │ ├─ (8:48) │ └─ (8:64) ├─cvg0-clv0_mimage_0 (253:4) │ └─iscsi1 (253:0) │ ├─ (8:32) │ └─ (8:16) └─cvg0-clv0_mlog (253:3) └─iscsi2 (253:2) ├─ (8:48) └─ (8:64) |
8、集群管理
1)、当基于clvm的gfs2文件系统不够用时,如何增加
1
2
3
4
5
6
7
8
9
10
11
|
[root@node3 ~] # lvextend -L +200M /dev/cvg0/clv0 Extending 2 mirror images. Extending logical volume clv0 to 1.20 GiB Logical volume clv0 successfully resized [root@node3 ~] # gfs2_grow /opt \\同步文件系统 Error: The device has grown by less than one Resource Group (RG). The device grew by 200MB. One RG is 255MB for this file system. gfs2_grow complete. [root@node3 ~] # lvs LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 mwi-aom- 1.20g clv0_mlog 96.08 |
2)、当节点不够用时,如果添加一个新的节点加入集群
步骤如下:
1>、安装ricci
1
|
[root@node4 ~] # yum install ricci -y |
2>、登录luci web,添加ricci
3>、导入共享存储设备
1
2
3
4
5
6
|
[root@node4 ~] # iscsiadm -m discovery -t st -p 192.168.100.171 [root@node4 ~] # iscsiadm -m discovery -t st -p 192.168.100.172 [root@node4 ~] # iscsiadm -m discovery -t st -p 192.168.200.172 [root@node4 ~] # iscsiadm -m discovery -t st -p 192.168.200.171 [root@node2 ~] # scp /etc/iscsi/iscsid.conf node4:/etc/iscsi/ [root@node4 ~] # iscsiadm -m node –l |
4>、设置multipath
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
|
[root@node4 ~] # yum -y install device-mapper-* [root@node4 ~] # mpathconf –enable \\生成配置文件 [root@node4 ~] # scp node1:/etc/multipath.conf /etc/ \\也可以直接从其他节点复制过来直接使用 [root@node4 ~] # /etc/rc.d/init.d/multipathd start [root@node4 ~] # lvs LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 mwi---m- 1.20g clv0_mlog [root@node4 ~] # multipath -ll iscsi2 (1storage2_id) dm-0 IET,VIRTUAL-DISK size=2.0G features= '1 queue_if_no_path' hwhandler= '0' wp=rw `-+- policy= 'round-robin 0' prio=1 status=active |- 11:0:0:1 sdb 8:16 active ready running `- 12:0:0:1 sdd 8:48 active ready running iscsi1 (1storage1_id) dm-1 IET,VIRTUAL-DISK size=2.0G features= '1 queue_if_no_path' hwhandler= '0' wp=rw `-+- policy= 'round-robin 0' prio=1 status=active |- 13:0:0:1 sde 8:64 active ready running `- 14:0:0:1 sdc 8:32 active ready running 5>、安装cmirror,支持mirror [root@node4 ~] # yum install cmirror –y [root@node4 ~] # /etc/rc.d/init.d/cmirrord start && chkconfig cmirrord on |
6>、在已成功挂载的节点上增加节点数,并实现挂载使用(注意:如果系统看不到/dev/cvg0/clv0,或者通过lvs看不到mirror的copy或者通过dmsetup ls –tree查看不到mirror结构,则重新启动节点系统即可生效)
1
2
3
4
5
6
7
8
9
10
11
|
[root@node4 ~] # mount /dev/cvg0/clv0 /opt/ \\节点数不够 Too many nodes mounting filesystem, no free journals [root@node2 ~] # gfs2_jadd -j 1 /opt \\增加一个节点数 Filesystem: /opt Old Journals 3 New Journals 4 [root@node4 ~] # mount /dev/cvg0/clv0 /opt/ [root@node4 ~] # ll /opt/ total 4 -rw-r--r-- 1 root root 210 Jun 8 00:42 test .txt [root@node4 ~] # |
1、整体测试
1)、测试多路冗余是否OK
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
|
[root@node2 ~] # ifdown eth1 \\关闭某一个网卡,模拟单线路故障 [root@node2 ~] # multipath -ll iscsi2 (1storage2_id) dm-1 IET,VIRTUAL-DISK size=2.0G features= '1 queue_if_no_path' hwhandler= '0' wp=rw `-+- policy= 'round-robin 0' prio=1 status=active |- 4:0:0:1 sde 8:64 failed faulty running \\导出设备故障 `- 3:0:0:1 sdd 8:48 active ready running iscsi1 (1storage1_id) dm-0 IET,VIRTUAL-DISK size=2.0G features= '1 queue_if_no_path' hwhandler= '0' wp=rw `-+- policy= 'round-robin 0' prio=1 status=active |- 6:0:0:1 sdc 8:32 active ready running `- 5:0:0:1 sdb 8:16 failed faulty running \\导出设备故障 [root@node2 opt] # mount | grep opt /dev/mapper/cvg0-clv0 on /opt type gfs2 (rw,relatime,hostdata=jid=0) [root@node2 opt] # touch test \\单线路故障并不影响集群文件系统正常使用 [root@node2 ~] # ifup eth1 \\恢复网卡 [root@node2 opt] # multipath –ll \\查看多路冗余是否恢复 iscsi2 (1storage2_id) dm-1 IET,VIRTUAL-DISK size=2.0G features= '1 queue_if_no_path' hwhandler= '0' wp=rw `-+- policy= 'round-robin 0' prio=1 status=active |- 4:0:0:1 sde 8:64 active ready running `- 3:0:0:1 sdd 8:48 active ready running iscsi1 (1storage1_id) dm-0 IET,VIRTUAL-DISK size=2.0G features= '1 queue_if_no_path' hwhandler= '0' wp=rw `-+- policy= 'round-robin 0' prio=1 status=active |- 6:0:0:1 sdc 8:32 active ready running `- 5:0:0:1 sdb 8:16 active ready running |
2)、测试基于gfs2文件系统的集群节点是否支持同时读写操作
1
2
3
4
5
6
7
8
9
|
[root@manager ~] # for i in {1..3}; do ssh node$i "mount /dev/cvg0/clv0 /opt"; done [root@node1 ~] # while :; do echo node1 >>/opt/test.txt;sleep 1; done \\节点1模拟向test.txt文件写入node1 [root@node2 ~] # while :; do echo node2 >>/opt/test.txt;sleep 1; done \\节点2模拟向test.txt文件写入node1 [root@node3 ~] # tail -f /opt/test.txt \\节点3模拟读出节点1和节点2同时写入的数据 node1 node2 node1 node2 ……… |
3)、测试Storage损坏一个是否能够正常工作
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
|
[root@node1 ~] # lvs \\mirror正常情况下的lv LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 mwi-a-m- 1.20g clv0_mlog 100.00 [root@storage1 ~] # ifdown eth1 && ifdown eth0 \\关闭storage1的两块网卡,相当于storage1宕机 [root@node2 opt] # lvs \\ \mirror在storage1宕机正常情况下的lv /dev/mapper/iscsi1 : read failed after 0 of 4096 at 2150563840: Input /output error /dev/mapper/iscsi1 : read failed after 0 of 4096 at 2150637568: Input /output error /dev/mapper/iscsi1 : read failed after 0 of 4096 at 0: Input /output error /dev/mapper/iscsi1 : read failed after 0 of 4096 at 4096: Input /output error /dev/sdb : read failed after 0 of 4096 at 0: Input /output error /dev/sdb : read failed after 0 of 4096 at 2150563840: Input /output error /dev/sdb : read failed after 0 of 4096 at 2150637568: Input /output error /dev/sdb : read failed after 0 of 4096 at 4096: Input /output error /dev/sdc : read failed after 0 of 4096 at 0: Input /output error /dev/sdc : read failed after 0 of 4096 at 2150563840: Input /output error /dev/sdc : read failed after 0 of 4096 at 2150637568: Input /output error /dev/sdc : read failed after 0 of 4096 at 4096: Input /output error Couldn't find device with uuid ziwJmg-Si56-l742-R3Nx-h0rK-KggJ-NdCigs. LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 -wi-ao-- 1.20g [root@node2 opt] # cp /var/log/messages .\\copy数据到挂载的目录,发现存储宕机一个并不影响读取和写入。 [root@node2 opt] # ll messages -rw------- 1 root root 1988955 Jun 8 18:08 messages [root@node2 opt] # dmsetup ls --tree cvg0-clv0 (253:5) └─iscsi2 (253:1) ├─ (8:48) └─ (8:64) iscsi1 (253:0) ├─ (8:16) └─ (8:32) [root@node2 opt] # vgs \\查看vgs情况 WARNING: Inconsistent metadata found for VG cvg0 - updating to use version 11 Missing device /dev/mapper/iscsi1 reappeared, updating metadata for VG cvg0 to version 11. VG #PV #LV #SN Attr VSize VFree cvg0 2 1 0 wz--nc 4.00g 2.80g [root@node2 opt] # lvconvert -m 1 /dev/cvg0/clv0 /dev/mapper/iscsi1 \\恢复mirror cvg0 /clv0 : Converted: 0.0% cvg0 /clv0 : Converted: 8.5% [root@node1 ~] # lvs LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 mwi-a-m- 1.20g clv0_mlog 77.45 [root@node1 ~] # lvs LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert clv0 cvg0 mwi-a-m- 1.20g clv0_mlog 82.35 [root@node1 ~] # dmsetup ls --tree cvg0-clv0 (253:5) ├─cvg0-clv0_mimage_1 (253:4) │ └─iscsi1 (253:1) │ ├─ (8:64) │ └─ (8:48) ├─cvg0-clv0_mimage_0 (253:3) │ └─iscsi2 (253:0) │ ├─ (8:16) │ └─ (8:32) └─cvg0-clv0_mlog (253:2) └─iscsi1 (253:1) ├─ (8:64) └─ (8:48) [root@node1 ~] # ll /opt/messages \\可以看到数据还在 -rw------- 1 root root 1988955 Jun 8 18:08 /opt/messages |