kubeadm搭建K8s集群

目录

背景

本次环境使用kubeadm搭建1.17.2版本的kubernetes，并使用kubeadm升级到1.17.4，镜像仓库为自建harbor，web界面使用dashboard展示，此文档仅是学习理论环境使用

https://github.com/kubernetes/kubernetes
https://kubernetes.io/zh/docs/concepts/workloads/controllers/deployment/#

搭建k8s使用的主机环境
IP Hostname Role
10.203.124.230 master1.linux.com mster
10.203.124.231 master2.linux.com mster
10.203.124.232 master3.linux.com mster
10.203.124.233 node1.linux.com node
10.203.124.234 node2.linux.com node
10.203.124.235 node3.linux.com node
10.203.124.236 harbor.linux.com harbor
10.203.124.237 ha1.linux.com HA
10.203.124.238 keeplived-vip VIP

  1. 环境准备

     所有主机时间同步
 root@node3:~# timedatectl set-timezone Asia/Shanghai
 root@node3:~# timedatectl set-ntp on
 root@node3:~# timedatectl 
                       Local time: Sat 2020-06-06 00:18:27 CST
                   Universal time: Fri 2020-06-05 16:18:27 UTC
                         RTC time: Fri 2020-06-05 16:18:27
                        Time zone: Asia/Shanghai (CST, +0800)
        System clock synchronized: yes
 systemd-timesyncd.service active: yes
                  RTC in local TZ: no
                  
 停止apparmor
 root@k8s-master1~# /etc/init.d/apparmor stop
 
 从系统中清除AppArmor
 root@k8s-master1:~# apt purge apparmor
 
 关闭防火墙
 ufw disable

  2. 确保所有机器的net.ipv4.ip_forward = 1

     root@master1:~# sysctl -p
 net.ipv4.ip_forward = 1
 
 修改内核参数
 root@master1:~# cat /etc/sysctl.conf
 最后添加一下内容
 net.ipv4.tcp_max_orphans = 3276800
 net.ipv4.tcp_max_tw_buckets =20000
 net.ipv4.tcp_synack_retries = 1
 net.ipv4.tcp_syncookies = 1
 net.ipv4.tcp_timestamps = 1 #?

 # keepalive conn
 net.ipv4.tcp_keepalive_intvl = 30
 net.ipv4.tcp_keepalive_time = 300
 net.ipv4.tcp_keepalive_probes = 3
 net.ipv4.ip_local_port_range = 10001  65000

 # swap
 vm.overcommit_memory = 0
 vm.swappiness = 10

 #net.ipv4.conf.eth1.rp_filter = 0
 #net.ipv4.conf.lo.arp_ignore = 1
 #net.ipv4.conf.lo.arp_announce = 2
 #net.ipv4.conf.all.arp_ignore = 1
 #net.ipv4.conf.all.arp_announce = 2

  3. 在所有master节点安装指定版本的kubeadm、kubelet、kubectl、docker

  4. 在所有node节点安装指定版本的kubeadm、kubelet、docker，在node节点kubectl为可选安装

  5. master 节点运行 kubeadm init 初始化命令

  6. 验证 master 节点状态

  7. .在 node 节点使用 kubeadm 命令将自己加入 k8s master(需要使用 master 生成 token 认证)

  8. 验证 node 节点状态

  9. 创建 pod 并测试网络通信

  10. 部署 web 服务 Dashboard

  11. k8s 集群升级

部署ha和harbor

harbor

安装docker和docker-compose

root@master1:~# cat docker-install_\(2\).sh 
#!/bin/bash
# step 1: 安装必要的一些系统工具
sudo apt-get update
sudo apt-get -y install apt-transport-https ca-certificates curl software-properties-common
# step 2: 安装GPG证书
curl -fsSL https://mirrors.aliyun.com/docker-ce/linux/ubuntu/gpg | sudo apt-key add -
# Step 3: 写入软件源信息
sudo add-apt-repository "deb [arch=amd64] https://mirrors.aliyun.com/docker-ce/linux/ubuntu $(lsb_release -cs) stable"
# Step 4: 更新并安装Docker-CE
sudo apt-get -y update
sudo apt-get -y install docker-ce  docker-ce-cli

root@harbor:~# sh docker-install.sh
root@harbor:~# apt install docker-compose

启动docker
root@harbor:/usr/local/src/harbor# systemctl start docker

部署harbor

下载harbor的offline包到系统的/usr/local/src/目录下
root@harbor:~# cd /usr/local/src/
root@harbor:/usr/local/src# ls
harbor-offline-installer-v1.1.2.tgz

root@harbor:/usr/local/src# tar xvf harbor-offline-installer-v1.1.2.tg
root@harbor:/usr/local/src# ls
harbor  harbor-offline-installer-v1.1.2.tgz

root@harbor:/usr/local/src# cd harbor/

编辑harbor.cfg文件修改hostname及harbor的admin密码
root@harbor:/usr/local/src/harbor# vim harbor.cfg
root@harbor:/usr/local/src/harbor# cat harbor.cfg | grep hostname
#The IP address or hostname to access admin UI and registry service.
hostname = harbor.linux.com
root@harbor:/usr/local/src/harbor# cat harbor.cfg | grep harbor_admin_password
harbor_admin_password = xxxxx


修改prepare文件的empty_subj参数
root@harbor:/usr/local/src/harbor# cat prepare | grep empty
#empty_subj = "/C=/ST=/L=/O=/CN=/"
empty_subj = "/C=US/ST=California/L=Palo Alto/O=VMware, Inc./OU=Harbor/CN=notarysigner"

安装harbor
root@harbor:/usr/local/src/harbor# ./install.sh

通过配置了harbor域名解析的主机，可访问harbor的hostname测试harbor，可通过harbor.cfg中配置的admin密码登录

docker login harbor

如果docker login时报以下错误，则需安装apt install gnupg2 pass包
root@harbor:/images/kubeadm_images/quay.io/coreos# docker login harbor.linux.com
Username: admin
Password: 
Error response from daemon: Get http://harbor.linux.com/v2/: dial tcp 10.203.124.236:80: connect: connection refused

root@harbor:/images# apt install gnupg2 pass

root@harbor:/images# docker login harbor.linux.com
Username: admin
Password: 
WARNING! Your password will be stored unencrypted in /root/.docker/config.json.
Configure a credential helper to remove this warning. See
https://docs.docker.com/engine/reference/commandline/login/#credentials-store

Login Succeeded

HA

两台HA主机上都需要执行以下安装操作

keepalived
root@ha1:~# apt install haproxy keepalived
root@ha1:~# cp /usr/share/doc/keepalived/samples/keepalived.conf.vrrp /etc/keepalived/keepalived.conf
root@ha1:~# vim /etc/keepalived/keepalived.conf
root@ha1:~# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     acassen
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 10.203.124.230
   smtp_connect_timeout 30
   router_id LVS_DEVEL
}

vrrp_instance VI_1 {
    state MASTER
    interface ens33
    garp_master_delay 10
    smtp_alert
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        10.203.124.238 dev ens33 label ens33:1
    }
}

root@ha1:~# systemctl restart keepalived.service
root@ha1:~# systemctl enable keepalived.service 
Synchronizing state of keepalived.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable keepalived
haproxy
root@ha1:~# vim /etc/haproxy/haproxy.cfg
在haproxy.cfg配置文件最后添加keepalived VIP的监听，负载均衡到三台master server
listen k8s-api-6443
    bind 10.203.124.238:6443
    mode tcp
    server master1 10.203.124.230:6443 check inter 3s fall 3 rise 5
    server master2 10.203.124.231:6443 check inter 3s fall 3 rise 5
    server master3 10.203.124.232:6443 check inter 3s fall 3 rise 5
    
root@ha1:~# systemctl restart haproxy.service 
root@ha1:~# systemctl enable haproxy.service 
Synchronizing state of haproxy.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable haproxy
root@ha1:~# ss -ntl | grep 6443
LISTEN   0         128           10.203.124.238:6443             0.0.0.0:*

kubernetes部署

master、node安装组件

阿里云k8s镜像源配置(https://developer.aliyun.com/mirror/docker-ce?spm=a2c6h.13651102.0.0.3e221b11wJY3XG)

docker安装

master节点和node节点安装docker，docker版本为19.03

root@master1:~# cat docker-install.sh 
#!/bin/bash
# step 1: 安装必要的一些系统工具
sudo apt-get update
sudo apt-get -y install apt-transport-https ca-certificates curl software-properties-common
# step 2: 安装GPG证书
curl -fsSL https://mirrors.aliyun.com/docker-ce/linux/ubuntu/gpg | sudo apt-key add -
# Step 3: 写入软件源信息
sudo add-apt-repository "deb [arch=amd64] https://mirrors.aliyun.com/docker-ce/linux/ubuntu $(lsb_release -cs) stable"
# Step 4: 更新并安装Docker-CE
sudo apt-get -y update
sudo apt-get -y install docker-ce  docker-ce-cli

root@master1:~# sh docker-install.sh

root@node1:~# systemctl start docker
root@node1:~# systemctl enable docker
Synchronizing state of docker.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable docker

配置docker 加速器

在master和node中配置docker加速器
root@master1:~# mkdir -p /etc/docker
root@master1:~# cat /etc/docker/daemon.json
{
"registry-mirrors": ["https://9916w1ow.mirror.aliyuncs.com"]
}
root@master1:~# systemctl daemon-reload && sudo systemctl restart docker
kubeadm安装
root@master1:~# apt-get update && apt-get install -y apt-transport-https
root@master1:~# curl https://mirrors.aliyun.com/kubernetes/apt/doc/apt-key.gpg | apt-key add - 
root@master1:~# cat <<EOF >/etc/apt/sources.list.d/kubernetes.list 
deb https://mirrors.aliyun.com/kubernetes/apt/ kubernetes-xenial main
EOF   //手动输入EOF
root@master1:~# apt-get update

显示可用的kubeadm版本，安装的版本为1.17.2
root@k8s-master1:~# apt-cache madison kubeadm

master节点安装

root@k8s-master1:~# apt-get install -y kubeadm=1.17.2-00 kubectl=1.17.2-00 kubelet=1.17.2-00

node节点安装

root@k8s-node1:~# apt-get install -y kubeadm=1.17.2-00 kubelet=1.17.2-00

各节点配置Kubelet的配置文件并启动Kubelet服务

将Environment="KUBELET_EXTRA_ARGS=--fail-swap-on=false"写入/etc/systemd/system/kubelet.service.d/10-kubeadm.conf文件中
root@k8s-master1:~# vim /etc/systemd/system/kubelet.service.d/10-kubeadm.conf
root@k8s-master1:~# cat /etc/systemd/system/kubelet.service.d/10-kubeadm.conf
# Note: This dropin only works with kubeadm and kubelet v1.11+
[Service]
Environment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf"
Environment="KUBELET_CONFIG_ARGS=--config=/var/lib/kubelet/config.yaml"
Environment="KUBELET_EXTRA_ARGS=--fail-swap-on=false"
# This is a file that "kubeadm init" and "kubeadm join" generates at runtime, populating the KUBELET_KUBEADM_ARGS variable dynamically
EnvironmentFile=-/var/lib/kubelet/kubeadm-flags.env
# This is a file that the user can use for overrides of the kubelet args as a last resort. Preferably, the user should use
# the .NodeRegistration.KubeletExtraArgs object in the configuration files instead. KUBELET_EXTRA_ARGS should be sourced from this file.
EnvironmentFile=-/etc/default/kubelet
ExecStart=
ExecStart=/usr/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_CONFIG_ARGS $KUBELET_KUBEADM_ARGS $KUBELET_EXTRA_ARGS

启动Kubelet
root@k8s-master1:~# systemctl daemon-reload
root@k8s-master1:~# systemctl restart kubelet
root@k8s-master1:~# systemctl enable kubelet

master节点上安装#bash命令补全脚本

root@k8s-master1:~# mkdir /data/scripts -p
root@k8s-master1:~# kubeadm completion bash > /data/scripts/kubeadm_completion.sh
root@k8s-master1:~# source /data/scripts/kubeadm_completion.sh
root@k8s-master1:~# cat /etc/profile
source /data/scripts/kubeadm_completion.sh

root@k8s-master1:~# chmod a+x /data/scripts/kubeadm_completion.sh

初始化前准备

在三台 master 中任意一台 master 进行集群初始化，而且集群初始化只需要初始化一次

kubeadm 命令使用
Available Commands:
    alpha #kubeadm 处于测试阶段的命令
    completion #bash 命令补全，需要安装 bash-completion
        #mkdir /data/scripts -p
        #kubeadm completion bash > /data/scripts/kubeadm_completion.sh
        #source /data/scripts/kubeadm_completion.sh
        #vim /etc/profile
            source /data/scripts/kubeadm_completion.sh
    config #管理 kubeadm 集群的配置，该配置保留在集群的 ConfigMap 中
        #kubeadm config print init-defaults
    help Help about any command
    init        #启动一个 Kubernetes 主节点
    join        #将节点加入到已经存在的 k8s master
    reset       还原使用 kubeadm init 或者 kubeadm join 对系统产生的环境变化token #管理 token
    upgrade #升级 k8s 版本
    version     #查看版本信息

kubeadm init 命令简介

  • 命令使用：
    https://kubernetes.io/zh/docs/reference/setup-tools/kubeadm/kubeadm/

  • 集群初始化：
    https://kubernetes.io/zh/docs/reference/setup-tools/kubeadm/kubeadm-init/

      root@docker-node1:~# kubeadm init --help
      --apiserver-advertise-address string #K8S API Server 将要监听的监听的本机 IP
      --apiserver-bind-port int32 #API Server 绑定的端口,默认为 6443
      --apiserver-cert-extra-sans stringSlice #可选的证书额外信息，用于指定 API Server 的服务器证书。可以是 IP 地址也可以是 DNS 名称。
      --cert-dir string #证书的存储路径，缺省路径为 /etc/kubernetes/pki
      --certificate-key string #定义一个用于加密 kubeadm-certs Secret 中的控制平台证书的密钥
      --config string #kubeadm #配置文件的路径
      --control-plane-endpoint string #为控制平台指定一个稳定的 IP 地址或 DNS 名称，即配置一个可以长期使用切是高可用的 VIP 或者域名，k8s 多 master 高可用基于此参数实现
      --cri-socket string #要连接的 CRI(容器运行时接口，Container Runtime Interface, 简称 CRI)套接字的路径，如果为空，则 kubeadm 将尝试自动检测此值，"仅当安装了多个 CRI 或具有非标准 CRI 插槽时，才使用此选项"
      --dry-run #不要应用任何更改，只是输出将要执行的操作，其实就是测试运行。
      --experimental-kustomize string #用于存储 kustomize 为静态 pod 清单所提供的补丁的路径。
      --feature-gates string #一组用来描述各种功能特性的键值（key=value）对，选项是：IPv6DualStack=true|false (ALPHA - default=false)
      --ignore-preflight-errors strings #可以忽略检查过程 中出现的错误信息，比如忽略 swap，如果为 all 就忽略所有
      --image-repository string #设置一个镜像仓库，默认为 k8s.gcr.io
      --kubernetes-version string #指定安装 k8s 版本，默认为 stable-1
      --node-name string #指定 node 节点名称
      --pod-network-cidr #设置 pod ip 地址范围
      --service-cidr #设置 service 网络地址范围
      --service-dns-domain string #设置 k8s 内部域名，默认为 cluster.local，会有相应的 DNS 服务(kube-dns/coredns)解析生成的域名记录。
      --skip-certificate-key-print #不打印用于加密的 key 信息
      --skip-phases strings #要跳过哪些阶段
      --skip-token-print #跳过打印 token 信息
      --token #指定 token
      --token-ttl #指定 token 过期时间，默认为 24 小时，0 为永不过期
      --upload-certs #更新证书

  #全局可选项：
      --add-dir-header #如果为 true，在日志头部添加日志目录
      --log-file string #如果不为空，将使用此日志文件
      --log-file-max-size uint #设置日志文件的最大大小，单位为兆，默认为 1800 兆，0 为没有限制
      --rootfs #宿主机的根路径，也就是绝对路径
      --skip-headers #如果为 true，在 log 日志里面不显示标题前缀
      --skip-log-headers #如果为 true，在 log 日志里里不显示标题
验证当前 kubeadm 版本
# kubeadm version #查看当前 kubeadm 版本
root@k8s-master1:~# kubeadm version
kubeadm version: &version.Info{Major:"1", Minor:"17", GitVersion:"v1.17.2", GitCommit:"59603c6e503c87169aea6106f57b9f242f64df89", GitTreeState:"clean", BuildDate:"2020-01-18T23:27:49Z", GoVersion:"go1.13.5", Compiler:"gc", Platform:"linux/amd64"}
准备k8s镜像

查看安装指定版本 k8s 需要的镜像有哪些

# kubeadm config images list --kubernetes-version v1.17.2
k8s.gcr.io/kube-apiserver:v1.17.2
k8s.gcr.io/kube-controller-manager:v1.17.2
k8s.gcr.io/kube-scheduler:v1.17.2
k8s.gcr.io/kube-proxy:v1.17.2
k8s.gcr.io/pause:3.1
k8s.gcr.io/etcd:3.4.3-0
k8s.gcr.io/coredns:1.6.5

master 节点镜像下载

推荐提前在 master 节点下载镜像以减少安装等待时间，但是镜像默认使用 Google 的镜像仓库，所以国内无法直接下载，但是可以通过阿里云的镜像仓库把镜像先提前下载下来，可以避免后期因镜像下载异常而导致 k8s 部署异常。

下载k8s image

root@k8s-master1:~# cat k8s-1.17.3-images-download.sh 
#!/bin/bash
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.17.3
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.17.3
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.17.3
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:v1.17.3
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.1
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.4.3-0
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.6.5

root@k8s-master1:~# bash k8s-1.17.3-images-download.sh 

root@k8s-master1:~# docker image ls
REPOSITORY                                                                    TAG                 IMAGE ID            CREATED             SIZE
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy                v1.17.3             ae853e93800d        3 months ago        116MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager   v1.17.3             b0f1517c1f4b        3 months ago        161MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver            v1.17.3             90d27391b780        3 months ago        171MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler            v1.17.3             d109c0821a2b        3 months ago        94.4MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy                v1.17.2             cba2a99699bd        4 months ago        116MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager   v1.17.2             da5fd66c4068        4 months ago        161MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver            v1.17.2             41ef50a5f06a        4 months ago        171MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler            v1.17.2             f52d4c527ef2        4 months ago        94.4MB
registry.cn-hangzhou.aliyuncs.com/google_containers/coredns                   1.6.5               70f311871ae1        7 months ago        41.6MB
registry.cn-hangzhou.aliyuncs.com/google_containers/etcd                      3.4.3-0             303ce5db0e90        7 months ago        288MB
registry.cn-hangzhou.aliyuncs.com/google_containers/pause                     3.1                 da86e6ba6ca1        2 years ago         742kB

Master 初始化

单节点master init命令初始化
root@k8s-master1:~# kubeadm init --apiserver-advertise-address=10.203.124.230 --control-plane-endpoint=10.203.124.238--apiserver-bind-port=6443 --ignore-preflight-errors=swap --image-repository=registry.cnhangzhou.aliyuncs.com/google_containers --kubernetes-version=v1.17.2 --pod-network-cidr=10.10.0.0/16 --service-cidr=172.16.0.0/16 --service-dns-domain=linux.com

初始化结果

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of control-plane nodes by copying certificate authorities
and service account keys on each node and then running the following as root:

  kubeadm join 10.203.124.238:6443 --token ytnfvw.2m0wg4v22lq51mdw \
    --discovery-token-ca-cert-hash sha256:0763db2d6454eeb4a25a8a91159a565f8bf81b9ffe69ba90fa3967652a00964f \
    --control-plane 

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 10.203.124.238:6443 --token ytnfvw.2m0wg4v22lq51mdw \
    --discovery-token-ca-cert-hash sha256:0763db2d6454eeb4a25a8a91159a565f8bf81b9ffe69ba90fa3967652a00964f

基于文件初始化高可用master

编辑kubeadm-init.yml文件
将kubeadm config的默认参数输入到yml文件
root@k8s-master1:~# kubeadm config print init-defaults > kubeadm-init.yml
W0606 16:11:52.170765   79373 validation.go:28] Cannot validate kube-proxy config - no validator is available
W0606 16:11:52.170940   79373 validation.go:28] Cannot validate kubelet config - no validator is available

修改yml文件的$\color{red}{advertiseAddress}$，$\color{red}{dnsDomain}$，$\color{red}{serviceSubnet}$，$\color{red}{imageRepository}$，并添加$\color{red}{controlPlaneEndpoint}$，$\color{red}{podSubnet}$

root@k8s-master1:~# cat kubeadm-init.yml
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 48h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 10.203.124.230
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock
  name: k8s-master1.linux.com
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controlPlaneEndpoint: 10.203.124.238:6443
controllerManager: {}
dns:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
kind: ClusterConfiguration
kubernetesVersion: v1.17.2
networking:
  dnsDomain: linux.com
  podSubnet: 10.10.0.0/16
  serviceSubnet: 172.16.0.0/16
scheduler: {}
基于yml文件初始化集群
root@k8s-master1:~# kubeadm init --config kubeadm-init.yml --ignore-preflight-errors=swap

输出结果

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of control-plane nodes by copying certificate authorities
and service account keys on each node and then running the following as root:

  kubeadm join 10.203.124.238:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:c5ae436a1bd5d7c128f7db7060d51551d8ee3903c35dd16d780c38653f937a06 \
    --control-plane 

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 10.203.124.238:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:c5ae436a1bd5d7c128f7db7060d51551d8ee3903c35dd16d780c38653f937a06
配置kube-config文件

kube-config文件中包含kube-apiserver地址及相关认证信息

master1上配置kube-config文件
root@k8s-master1:~# mkdir -p $HOME/.kube
root@k8s-master1:~# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
root@k8s-master1:~# chown $(id -u):$(id -g) $HOME/.kube/config

master上没有部署flannel网络组件时，kubectl get nodes显示的状态为NotReady
查看cluster节点
root@k8s-master1:~# kubectl get nodes
NAME                     STATUS     ROLES    AGE   VERSION
k8s-master1.linux.com   NotReady   master   22m   v1.17.2

部署网络组件flannel

https://github.com/coreos/flannel/

准备kube-flannel.yml文件
将https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml 下载到master1
[root@JevonWei ~]# wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
root@k8s-master1:~# ls kube-flannel.yml 
kube-flannel.yml

修改kube-flannel.yml文件中的pod network网络中kubeadm init指定的--pod-network-cidr=10.10.0.0/16地址
root@k8s-master1:~# cat kube-flannel.yml
    net-conf.json: |
    {
      "Network": "10.10.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
准备flannel image
执行kube-flannel.yml文件，apply时会pull quay.io/coreos/flannel:v0.12.0-amd64 image，若无法直接从quay.io/coreos/flannel:v0.12.0-amd64 pull image，可先使用其他途径将image pull到所有的master上


root@k8s-master1:~/images# docker load < flannel.tar 
256a7af3acb1: Loading layer [==================================================>]  5.844MB/5.844MB
d572e5d9d39b: Loading layer [==================================================>]  10.37MB/10.37MB
57c10be5852f: Loading layer [==================================================>]  2.249MB/2.249MB
7412f8eefb77: Loading layer [==================================================>]  35.26MB/35.26MB
05116c9ff7bf: Loading layer [==================================================>]   5.12kB/5.12kB
Loaded image: quay.io/coreos/flannel:v0.12.0-amd64

root@k8s-master1:~/images# docker images 
REPOSITORY                                                                    TAG                 IMAGE ID            CREATED             SIZE
quay.io/coreos/flannel                                                        v0.12.0-amd64       4e9f801d2217        2 months ago        52.8MB
部署flannel

master1上执行kube-flannel.yml文件

root@k8s-master1:~# kubectl apply -f kube-flannel.yml 
podsecuritypolicy.policy/psp.flannel.unprivileged created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds-amd64 created
daemonset.apps/kube-flannel-ds-arm64 created
daemonset.apps/kube-flannel-ds-arm created
daemonset.apps/kube-flannel-ds-ppc64le created
daemonset.apps/kube-flannel-ds-s390x created
确认node状态
root@k8s-master1:~# kubectl get nodes
NAME                     STATUS   ROLES    AGE     VERSION
k8s-master1.linux.com   Ready    master   3h25m   v1.17.2
k8s-master2.linux.com   Ready    master   164m    v1.17.2
k8s-master3.linux.com   Ready    master   159m    v1.17.2

master添加新节点

当前maste1生成证书用于添加新控制节点
root@k8s-master1:~# kubeadm init phase upload-certs --upload-certs
I0606 16:38:29.449089   84654 version.go:251] remote version is much newer: v1.18.3; falling back to: stable-1.17
W0606 16:38:34.434978   84654 validation.go:28] Cannot validate kube-proxy config - no validator is available
W0606 16:38:34.435026   84654 validation.go:28] Cannot validate kubelet config - no validator is available
[upload-certs] Storing the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace
[upload-certs] Using certificate key:
de15087cf5e3e5986c5e1577f9d041ed02f95ceb911a20d41eba792b9afc507c
master join 新节点

在已经安装了docker、kubeadm和kubelet的 master2、master3节点上执行以下操作：

root@k8s-master2:~# kubeadm join 10.203.124.238:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:c5ae436a1bd5d7c128f7db7060d51551d8ee3903c35dd16d780c38653f937a06 \
    --control-plane --certificate-key de15087cf5e3e5986c5e1577f9d041ed02f95ceb911a20d41eba792b9afc507c --ignore-preflight-errors=swap
    
    \\ -certificate-key指定的key为上步操作kubeadm init phase upload-certs --upload-certs生成的Using certificate key

kubeadm join输出结果

This node has joined the cluster and a new control plane instance was created:

* Certificate signing request was sent to apiserver and approval was received.
* The Kubelet was informed of the new secure connection details.
* Control plane (master) label and taint were applied to the new node.
* The Kubernetes control plane instances scaled up.
* A new etcd member was added to the local/stacked etcd cluster.

To start administering your cluster from this node, you need to run the following as a regular user:

    mkdir -p $HOME/.kube
    sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    sudo chown $(id -u):$(id -g) $HOME/.kube/config

Run 'kubectl get nodes' to see this node join the cluster.
master1查看当前节点状态

在master1上执行kubectl get nodes

root@k8s-master1:~# kubectl get nodes
NAME                     STATUS     ROLES    AGE     VERSION
k8s-master1.linux.com   NotReady   master   46m     v1.17.2
k8s-master2.linux.com   NotReady   master   6m18s   v1.17.2
k8s-master3.linux.com   NotReady   master   36s     v1.17.2

当master节点上有quay.io/coreos/flannel iamge时，STATUS会由NotReady变为Ready
root@k8s-master1:~# kubectl get nodes
NAME                     STATUS   ROLES    AGE     VERSION
k8s-master1.linux.com   Ready    master   3h25m   v1.17.2
k8s-master2.linux.com   Ready    master   164m    v1.17.2
k8s-master3.linux.com   Ready    master   159m    v1.17.2

添加node节点

在所有node上执行kubeadm join，加入k8s集群 node节点

root@node1:~# kubeadm join 10.203.124.238:6443 --token abcdef.0123456789abcdef --discovery-token-ca-cert-hash sha256:c5ae436a1bd5d7c128f7db7060d51551d8ee3903c35dd16d780c38653f937a06 --ignore-preflight-errors=swap
输出为
W0606 15:47:49.095318    5123 join.go:346] [preflight] WARNING: JoinControlPane.controlPlane settings will be ignored when control-plane flag is not set.
[preflight] Running pre-flight checks
    [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
    [WARNING Swap]: running with swap on is not supported. Please disable swap
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.17" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

查看node节点状态

node1节点添加之后，若master1上kubectl get nodes 输出的node节点STATUS为NotReady，则也需要手动将quay.io/coreos/flannel:v0.12.0-amd64 镜像load到node节点上
root@k8s-master1:~# kubectl get nodes
NAME                     STATUS     ROLES    AGE     VERSION
k8s-master1.linux.com   Ready      master   3h45m   v1.17.2
k8s-master2.linux.com   Ready      master   3h5m    v1.17.2
k8s-master3.linux.com   Ready      master   179m    v1.17.2
node1.linux.com         NotReady   <none>   3m58s   v1.17.2
node2.linux.com         NotReady   <none>   2m30s   v1.17.2
node3.linux.com         NotReady   <none>   2m24s   v1.17.2

可手动将master节点上的lannel image 拷贝到 node节点上，并在node上导入
root@node3:~# docker load < images/flannel.tar
256a7af3acb1: Loading layer [==================================================>]  5.844MB/5.844MB
d572e5d9d39b: Loading layer [==================================================>]  10.37MB/10.37MB
57c10be5852f: Loading layer [==================================================>]  2.249MB/2.249MB
7412f8eefb77: Loading layer [==================================================>]  35.26MB/35.26MB
05116c9ff7bf: Loading layer [==================================================>]   5.12kB/5.12kB
Loaded image: quay.io/coreos/flannel:v0.12.0-amd64

root@node3:~# docker images
REPOSITORY                                                       TAG                 IMAGE ID            CREATED             SIZE
quay.io/coreos/flannel                                           v0.12.0-amd64       4e9f801d2217        2 months ago        52.8MB

master1上再次确认nodes状态为Ready

root@k8s-master1:~# kubectl get nodes
NAME                     STATUS   ROLES    AGE     VERSION
k8s-master1.linux.com   Ready    master   3h52m   v1.17.2
k8s-master2.linux.com   Ready    master   3h11m   v1.17.2
k8s-master3.linux.com   Ready    master   3h6m    v1.17.2
node1.linux.com         Ready    <none>   10m     v1.17.2
node2.linux.com         Ready    <none>   9m1s    v1.17.2
node3.linux.com         Ready    <none>   8m55s   v1.17.2

测试

验证master状态
root@k8s-master1:~# kubectl get nodes
NAME                     STATUS   ROLES    AGE     VERSION
k8s-master1.linux.com   Ready    master   5h29m   v1.17.2
k8s-master2.linux.com   Ready    master   5h24m   v1.17.2
k8s-master3.linux.com   Ready    master   5h23m   v1.17.2
node1.linux.com         Ready    <none>   5h23m   v1.17.2
node2.linux.com         Ready    <none>   5h22m   v1.17.2
node3.linux.com         Ready    <none>   5h22m   v1.17.2
验证k8s集群状态
root@k8s-master1:~# kubectl get cs
NAME                 STATUS    MESSAGE             ERROR
scheduler            Healthy   ok                  
controller-manager   Healthy   ok                  
etcd-0               Healthy   {"health":"true"}
当前csr证书状态
root@k8s-master1:~# kubectl get csr
测试pod间的网络

k8s集群创建容器并测试网络通信

创建一个alpine pod

root@k8s-master1:~# kubectl run net-test1 --image=alpine --replicas=3 sleep 360000
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.
deployment.apps/net-test1 created

pod已创建
root@k8s-master1:~# kubectl get pod
NAME                         READY   STATUS    RESTARTS   AGE
net-test1-5fcc69db59-7s5nc   1/1     Running   0          42s
net-test1-5fcc69db59-9v95p   1/1     Running   0          42s
net-test1-5fcc69db59-vq5wq   1/1     Running   0          42s

root@k8s-master1:~# kubectl get pod -o wide
NAME                         READY   STATUS    RESTARTS   AGE   IP          NODE               NOMINATED NODE   READINESS GATES
net-test1-5fcc69db59-7s5nc   1/1     Running   0          77s   10.10.3.2   node1.linux.com   <none>           <none>
net-test1-5fcc69db59-9v95p   1/1     Running   0          77s   10.10.4.2   node2.linux.com   <none>           <none>
net-test1-5fcc69db59-vq5wq   1/1     Running   0          77s   10.10.5.2   node3.linux.com   <none>           <none>

测试pod与外部网络的通信

容器与外网和pod内其他容器都是可通信
root@k8s-master1:~# kubectl exec -it net-test1-5fcc69db59-9v95p sh
/ # ifconfig
eth0      Link encap:Ethernet  HWaddr FA:37:E5:7B:61:BA  
          inet addr:10.10.4.2  Bcast:0.0.0.0  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1450  Metric:1
          RX packets:26 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1968 (1.9 KiB)  TX bytes:42 (42.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

/ # ping 10.10.3.2
PING 10.10.3.2 (10.10.3.2): 56 data bytes
64 bytes from 10.10.3.2: seq=0 ttl=62 time=1.934 ms
64 bytes from 10.10.3.2: seq=1 ttl=62 time=0.402 ms

/ # ping www.baidu.com
PING www.baidu.com (36.152.44.95): 56 data bytes
64 bytes from 36.152.44.95: seq=0 ttl=55 time=9.423 ms

部署dashboard

将dashboard上传到Harbor仓库

登录harbor，创建仓库baseimages

pull dashboard iamge
root@k8s-master1:~# docker pull kubernetesui/dashboard:v2.0.0-rc6
v2.0.0-rc6: Pulling from kubernetesui/dashboard
1f45830e3050: Pull complete 
Digest: sha256:61f9c378c427a3f8a9643f83baa9f96db1ae1357c67a93b533ae7b36d71c69dc
Status: Downloaded newer image for kubernetesui/dashboard:v2.0.0-rc6
docker.io/kubernetesui/dashboard:v2.0.0-rc6

root@k8s-master1:~# docker pull kubernetesui/metrics-scraper:v1.0.3
v1.0.3: Pulling from kubernetesui/metrics-scraper
75d12d4b9104: Pull complete 
fcd66fda0b81: Pull complete 
53ff3f804bbd: Pull complete 
Digest: sha256:40f1d5785ea66609b1454b87ee92673671a11e64ba3bf1991644b45a818082ff
Status: Downloaded newer image for kubernetesui/metrics-scraper:v1.0.3
docker.io/kubernetesui/metrics-scraper:v1.0.3

root@k8s-master1:~# docker image ls
REPOSITORY                                                                    TAG                 IMAGE ID            CREATED             SIZE
harbor.linux.com/baseimages/dashboard                                        v2.0.0-rc6          cdc71b5a8a0e        2 months ago        221MB
kubernetesui/dashboard                                                        v2.0.0-rc6          cdc71b5a8a0e        2 months ago        221MB
quay.io/coreos/flannel                                                        v0.12.0-amd64       4e9f801d2217        2 months ago        52.8MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy                v1.17.3             ae853e93800d        3 months ago        116MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager   v1.17.3             b0f1517c1f4b        3 months ago        161MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver            v1.17.3             90d27391b780        3 months ago        171MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler            v1.17.3             d109c0821a2b        3 months ago        94.4MB
kubernetesui/metrics-scraper                                                  v1.0.3              3327f0dbcb4a        4 months ago        40.1MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy                v1.17.2             cba2a99699bd        4 months ago        116MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver            v1.17.2             41ef50a5f06a        4 months ago        171MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager   v1.17.2             da5fd66c4068        4 months ago        161MB
registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler            v1.17.2             f52d4c527ef2        4 months ago        94.4MB
registry.cn-hangzhou.aliyuncs.com/google_containers/coredns                   1.6.5               70f311871ae1        7 months ago        41.6MB
registry.cn-hangzhou.aliyuncs.com/google_containers/etcd                      3.4.3-0             303ce5db0e90        7 months ago        288MB
registry.cn-hangzhou.aliyuncs.com/google_containers/pause                     3.1                 da86e6ba6ca1        2 years ago         742kB
将image push到harbor

修改所有master、node主机上的hosts解析文件，确保可访问harbor主机

root@k8s-master1:~# cat /etc/hosts | grep harbor
10.203.124.236 harbor harbor.linux.com

配置允许docker使用http协议

在所有主机上将--insecure-registry harbor.linux.com添加到docker启动参数中，表示可使用http协议的仓库
root@k8s-master1:~# dockerd --help | grep ins
  --authorization-plugin list               Authorization plugins to load
  --dns-search list                         DNS search domains to use
  --insecure-registry list                  Enable insecure registry communication

root@k8s-master1:~# cat /lib/systemd/system/docker.service | grep ExecStart
ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock --insecure-registry harbor.linux.com

重启docker生效
root@k8s-master1:~# systemctl daemon-reload 
root@k8s-master1:~# systemctl restart docker

将dashboard 镜像tag修改为harbor的信息

root@k8s-master1:~# docker tag 3327f0dbcb4a harbor.linux.com/baseimages/metrics-scraper:v1.0.3

root@k8s-master1:~# docker tag cdc71b5a8a0e harbor.linux.com/baseimages/dashboard:v2.0.0-rc6
root@k8s-master1:~# docker images
REPOSITORY                                                                    TAG                 IMAGE ID            CREATED             SIZE
kubernetesui/dashboard                                                        v2.0.0-rc6          cdc71b5a8a0e        2 months ago        221MB
harbor.linux.com/baseimages/dashboard                                        v2.0.0-rc6          cdc71b5a8a0e        2 months ago        221MB

上传镜像到harbor

root@k8s-master1:~# docker login harbor.linux.com
Username: admin         
Password: 
WARNING! Your password will be stored unencrypted in /root/.docker/config.json.
Configure a credential helper to remove this warning. See
https://docs.docker.com/engine/reference/commandline/login/#credentials-store
Login Succeeded


root@k8s-master1:~# docker push harbor.linux.com/baseimages/dashboard:v2.0.0-rc6
The push refers to repository [harbor.linux.com/baseimages/dashboard]
f6419c845e04: Pushed 
v2.0.0-rc6: digest: sha256:7d7273c38f37c62375bb8262609b746f646da822dc84ea11710eed7082482b12 size: 529

root@k8s-master1:~# docker push harbor.linux.com/baseimages/metrics-scraper:v1.0.3
The push refers to repository [harbor.linux.com/baseimages/metrics-scraper]
4e247d9378a1: Pushed 
0aec45b843c5: Pushed 
3ebaca24781b: Pushed 
v1.0.3: digest: sha256:e24a74b3b1cdc84d6285d507a12eb06907fd8c457b3e8ae9baa9418eca43efc4 size: 946

harbor中确认image是否上传

harbor pull image

从harbor下载镜像

root@node1:~# docker pull harbor.linux.com/baseimages/dashboard:v2.0.0-rc6
v2.0.0-rc6: Pulling from baseimages/dashboard
1f45830e3050: Pull complete 
Digest: sha256:7d7273c38f37c62375bb8262609b746f646da822dc84ea11710eed7082482b12
Status: Downloaded newer image for harbor.linux.com/baseimages/dashboard:v2.0.0-rc6
harbor.linux.com/baseimages/dashboard:v2.0.0-rc6

部署dashboard

准备yml文件
准备dashboard-2.0.0-rc6.yml文件，image仓库指向harbor，nodePort为30002
root@k8s-master1:~# cat dashboard-2.0.0-rc6.yml 
# Copyright 2017 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

apiVersion: v1
kind: Namespace
metadata:
  name: kubernetes-dashboard

---

apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard

---

kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
spec:
  type: NodePort
  ports:
    - port: 443
      targetPort: 8443
      nodePort: 30002 
  selector:
    k8s-app: kubernetes-dashboard

---

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-certs
  namespace: kubernetes-dashboard
type: Opaque

---

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-csrf
  namespace: kubernetes-dashboard
type: Opaque
data:
  csrf: ""

---

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-key-holder
  namespace: kubernetes-dashboard
type: Opaque

---

kind: ConfigMap
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-settings
  namespace: kubernetes-dashboard

---

kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
rules:
  # Allow Dashboard to get, update and delete Dashboard exclusive secrets.
  - apiGroups: [""]
    resources: ["secrets"]
    resourceNames: ["kubernetes-dashboard-key-holder", "kubernetes-dashboard-certs", "kubernetes-dashboard-csrf"]
    verbs: ["get", "update", "delete"]
    # Allow Dashboard to get and update 'kubernetes-dashboard-settings' config map.
  - apiGroups: [""]
    resources: ["configmaps"]
    resourceNames: ["kubernetes-dashboard-settings"]
    verbs: ["get", "update"]
    # Allow Dashboard to get metrics.
  - apiGroups: [""]
    resources: ["services"]
    resourceNames: ["heapster", "dashboard-metrics-scraper"]
    verbs: ["proxy"]
  - apiGroups: [""]
    resources: ["services/proxy"]
    resourceNames: ["heapster", "http:heapster:", "https:heapster:", "dashboard-metrics-scraper", "http:dashboard-metrics-scraper"]
    verbs: ["get"]

---

kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
rules:
  # Allow Metrics Scraper to get metrics from the Metrics server
  - apiGroups: ["metrics.k8s.io"]
    resources: ["pods", "nodes"]
    verbs: ["get", "list", "watch"]

---

apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: kubernetes-dashboard
subjects:
  - kind: ServiceAccount
    name: kubernetes-dashboard
    namespace: kubernetes-dashboard

---

apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: kubernetes-dashboard
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: kubernetes-dashboard
subjects:
  - kind: ServiceAccount
    name: kubernetes-dashboard
    namespace: kubernetes-dashboard

---

kind: Deployment
apiVersion: apps/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kubernetes-dashboard
spec:
  replicas: 1
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      k8s-app: kubernetes-dashboard
  template:
    metadata:
      labels:
        k8s-app: kubernetes-dashboard
    spec:
      containers:
        - name: kubernetes-dashboard
          image: harbor.linux.com/baseimages/dashboard:v2.0.0-rc6
          imagePullPolicy: Always
          ports:
            - containerPort: 8443
              protocol: TCP
          args:
            - --auto-generate-certificates
            - --namespace=kubernetes-dashboard
            # Uncomment the following line to manually specify Kubernetes API server Host
            # If not specified, Dashboard will attempt to auto discover the API server and connect
            # to it. Uncomment only if the default does not work.
            # - --apiserver-host=http://my-address:port
          volumeMounts:
            - name: kubernetes-dashboard-certs
              mountPath: /certs
              # Create on-disk volume to store exec logs
            - mountPath: /tmp
              name: tmp-volume
          livenessProbe:
            httpGet:
              scheme: HTTPS
              path: /
              port: 8443
            initialDelaySeconds: 30
            timeoutSeconds: 30
          securityContext:
            allowPrivilegeEscalation: false
            readOnlyRootFilesystem: true
            runAsUser: 1001
            runAsGroup: 2001
      volumes:
        - name: kubernetes-dashboard-certs
          secret:
            secretName: kubernetes-dashboard-certs
        - name: tmp-volume
          emptyDir: {}
      serviceAccountName: kubernetes-dashboard
      nodeSelector:
        "beta.kubernetes.io/os": linux
      # Comment the following tolerations if Dashboard must not be deployed on master
      tolerations:
        - key: node-role.kubernetes.io/master
          effect: NoSchedule

---

kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: dashboard-metrics-scraper
  name: dashboard-metrics-scraper
  namespace: kubernetes-dashboard
spec:
  ports:
    - port: 8000
      targetPort: 8000
  selector:
    k8s-app: dashboard-metrics-scraper

---

kind: Deployment
apiVersion: apps/v1
metadata:
  labels:
    k8s-app: dashboard-metrics-scraper
  name: dashboard-metrics-scraper
  namespace: kubernetes-dashboard
spec:
  replicas: 1
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      k8s-app: dashboard-metrics-scraper
  template:
    metadata:
      labels:
        k8s-app: dashboard-metrics-scraper
      annotations:
        seccomp.security.alpha.kubernetes.io/pod: 'runtime/default'
    spec:
      containers:
        - name: dashboard-metrics-scraper
          image: harbor.linux.com/baseimages/metrics-scraper:v1.0.3
          ports:
            - containerPort: 8000
              protocol: TCP
          livenessProbe:
            httpGet:
              scheme: HTTP
              path: /
              port: 8000
            initialDelaySeconds: 30
            timeoutSeconds: 30
          volumeMounts:
          - mountPath: /tmp
            name: tmp-volume
          securityContext:
            allowPrivilegeEscalation: false
            readOnlyRootFilesystem: true
            runAsUser: 1001
            runAsGroup: 2001
      serviceAccountName: kubernetes-dashboard
      nodeSelector:
        "beta.kubernetes.io/os": linux
      # Comment the following tolerations if Dashboard must not be deployed on master
      tolerations:
        - key: node-role.kubernetes.io/master
          effect: NoSchedule
      volumes:
        - name: tmp-volume
          emptyDir: {}

编辑admin-user.yml权限控制文件

root@k8s-master1:~# cat admin-user.yml
apiVersion: v1
kind: ServiceAccount
metadata:
  name: admin-user
  namespace: kubernetes-dashboard

---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: admin-user
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
- kind: ServiceAccount
  name: admin-user
  namespace: kubernetes-dashboard
部署
root@k8s-master1:~# kubectl apply -f dashboard-2.0.0-rc6.yml
namespace/kubernetes-dashboard created
serviceaccount/kubernetes-dashboard created
service/kubernetes-dashboard created
secret/kubernetes-dashboard-certs created
secret/kubernetes-dashboard-csrf created
secret/kubernetes-dashboard-key-holder created
configmap/kubernetes-dashboard-settings created
role.rbac.authorization.k8s.io/kubernetes-dashboard created
clusterrole.rbac.authorization.k8s.io/kubernetes-dashboard created
rolebinding.rbac.authorization.k8s.io/kubernetes-dashboard created
clusterrolebinding.rbac.authorization.k8s.io/kubernetes-dashboard created
deployment.apps/kubernetes-dashboard created
service/dashboard-metrics-scraper created
deployment.apps/dashboard-metrics-scraper created

root@k8s-master1:~# kubectl apply -f  admin-user.yml 
serviceaccount/admin-user created
clusterrolebinding.rbac.authorization.k8s.io/admin-user created

查看集群的services，可看到dashboard的端口为30002

root@k8s-master1:~# kubectl get service -A
NAMESPACE              NAME                        TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)                  AGE
default                kubernetes                  ClusterIP   172.16.0.1       <none>        443/TCP                  16m
kube-system            kube-dns                    ClusterIP   172.16.0.10      <none>        53/UDP,53/TCP,9153/TCP   16m
kubernetes-dashboard   dashboard-metrics-scraper   ClusterIP   172.16.213.211   <none>        8000/TCP                 65s
kubernetes-dashboard   kubernetes-dashboard        NodePort    172.16.65.18     <none>        443:30002/TCP            66s

所有的master和node节点都监听dashboard 30002端口

root@node1:~# ss -ntl | grep 30002
LISTEN   0         128                       *:30002                  *:*

在浏览器中访问任意节点的30002端口登录(https://10.203.124.233:30002)

使用token登录dashboard

在master节点上查看kubernetes-dashboard的token，并复制token，在dashboard的浏览器中使用token登录

root@k8s-master1:~# kubectl get secret -A | grep admin
kubernetes-dashboard   admin-user-token-t8fjg                           kubernetes.io/service-account-token   3      7m9s
  
root@k8s-master1:~# kubectl describe secret admin-user-token-t8fjg -n kubernetes-dashboard
Name:         admin-user-token-t8fjg
Namespace:    kubernetes-dashboard
Labels:       <none>
Annotations:  kubernetes.io/service-account.name: admin-user
              kubernetes.io/service-account.uid: c1d4a1b1-5082-447c-b29b-f0730290ae9f

Type:  kubernetes.io/service-account-token

Data
====
ca.crt:     1025 bytes
namespace:  20 bytes
token:      eyJhbGciOiJSUzI1NiIsImtpZCI6IkpiYks5aGpXUV84eHV2ZElGRVZ4emxuNEUyWl9PbUU0WkIzNk1tRjVNZHcifQ.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.RN5AFQI_gZ5IxwHQ-yfkfyQDL4UXmyFSq8gfi_JAEUBNvKW-jEeIVri2ZF8O1PqJpkoiKouVxdgc3MwJDdBpszxFv1bub0GeMdKidiJ4hifo1QJOHV8V84B51PshFpMvDLYpX_JkK40tiYnjH5CnRrNgeM-SalOo-QlfpbK1mDyBostsuz8-9lOJGXqOZLv6TZPlBfA31rcfmo2G7eDreE4kR61EhW2q5pYmEgmATIBJwAZXSy0-W3oIvSwxekXzgGByzrObmczpW_wdcP81T83Uzhhz5cst1n3xUhP8a-WepeiNfHQbh46UK310KpqivLEEcDS6Aa1HdQTxpv1aKA

在浏览器中，使用token登录kubernetes-dashboard

登录

使用KubeCondif文件登录Dashboard

查看token

root@k8s-master1:~# kubectl get secret -A | grep admin
kubernetes-dashboard   admin-user-token-t8fjg                           kubernetes.io/service-account-token   3      10h
root@k8s-master1:~# kubectl describe secret admin-user-token-t8fjg -n kubernetes-dashboard
Name:         admin-user-token-t8fjg
Namespace:    kubernetes-dashboard
Labels:       <none>
Annotations:  kubernetes.io/service-account.name: admin-user
              kubernetes.io/service-account.uid: c1d4a1b1-5082-447c-b29b-f0730290ae9f

Type:  kubernetes.io/service-account-token

Data
====
ca.crt:     1025 bytes
namespace:  20 bytes
token:      eyJhbGciOiJSUzI1NiIsImtpZCI6IkpiYks5aGpXUV84eHV2ZElGRVZ4emxuNEUyWl9PbUU0WkIzNk1tRjVNZHcifQ.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.RN5AFQI_gZ5IxwHQ-yfkfyQDL4UXmyFSq8gfi_JAEUBNvKW-jEeIVri2ZF8O1PqJpkoiKouVxdgc3MwJDdBpszxFv1bub0GeMdKidiJ4hifo1QJOHV8V84B51PshFpMvDLYpX_JkK40tiYnjH5CnRrNgeM-SalOo-QlfpbK1mDyBostsuz8-9lOJGXqOZLv6TZPlBfA31rcfmo2G7eDreE4kR61EhW2q5pYmEgmATIBJwAZXSy0-W3oIvSwxekXzgGByzrObmczpW_wdcP81T83Uzhhz5cst1n3xUhP8a-WepeiNfHQbh46UK310KpqivLEEcDS6Aa1HdQTxpv1aKA

拷贝一份kube的配置文件做修改
root@k8s-master1:~# cp /root/.kube/config /opt/kubeconfig

将token信息追加到配置文件最后

将添加token后的kubeconfig文件存放于电脑本地，每次登录时选中该文件即可登录

K8s集群升级

k8s从1.17.2升级到1.17.4
升级 k8s 集群必须先升级 kubeadm 版本到目的 k8s 版本，也就是说 kubeadm 是 k8s 升级的 ”准升证”。

升级 k8s master 服务

在 k8s 的所有 master 进行升级，将管理端服务 kube-controller-manager、kube-apiserver、kube-scheduler、kube-proxy

验证当 k8s 前版本
root@k8s-master1:~# kubeadm version
kubeadm version: &version.Info{Major:"1", Minor:"17", GitVersion:"v1.17.2", GitCommit:"59603c6e503c87169aea6106f57b9f242f64df89", GitTreeState:"clean", BuildDate:"2020-01-18T23:27:49Z", GoVersion:"go1.13.5", Compiler:"gc", Platform:"linux/amd64"}
各 master 安装指定新版本 kubeadm
查看k8s版本列表
root@k8s-master1:~# apt-cache madison kubeadm
kubeadm |  1.18.3-00 | https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main amd64 Packages
kubeadm |  1.18.2-00 | https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main amd64 Packages
kubeadm |  1.18.1-00 | https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main amd64 Packages
kubeadm |  1.18.0-00 | https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main amd64 Packages
kubeadm |  1.17.6-00 | https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main amd64 Packages
kubeadm |  1.17.5-00 | https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main amd64 Packages
kubeadm |  1.17.4-00 | https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main amd64 Packages
kubeadm |  1.17.3-00 | https://mirrors.aliyun.com/kubernetes/apt kubernetes-xenial/main amd64 Packages

在各master安装新版本 kubeadm
root@k8s-master1:~# apt-get install kubeadm=1.17.4-00

验证 kubeadm 版本
root@k8s-master1:~# kubeadm version
kubeadm version: &version.Info{Major:"1", Minor:"17", GitVersion:"v1.17.4", GitCommit:"8d8aa39598534325ad77120c120a22b3a990b5ea", GitTreeState:"clean", BuildDate:"2020-03-12T21:01:11Z", GoVersion:"go1.13.8", Compiler:"gc", Platform:"linux/amd64"}
kubeadm 升级命令使用帮助
root@k8s-master1:~# kubeadm upgrade --help
Upgrade your cluster smoothly to a newer version with this command

Usage:
  kubeadm upgrade [flags]
  kubeadm upgrade [command]

Available Commands:
  apply       Upgrade your Kubernetes cluster to the specified version
  diff        Show what differences would be applied to existing static pod manifests. See also: kubeadm upgrade apply --dry-run
  node        Upgrade commands for a node in the cluster
  plan        Check which versions are available to upgrade to and validate whether your current cluster is upgradeable. To skip the internet check, pass in the optional [version] parameter

Flags:
  -h, --help   help for upgrade

Global Flags:
      --add-dir-header           If true, adds the file directory to the header
      --log-file string          If non-empty, use this log file
      --log-file-max-size uint   Defines the maximum size a log file can grow to. Unit is megabytes. If the value is 0, the maximum file size is unlimited. (default 1800)
      --rootfs string            [EXPERIMENTAL] The path to the 'real' host root filesystem.
      --skip-headers             If true, avoid header prefixes in the log messages
      --skip-log-headers         If true, avoid headers when opening log files
  -v, --v Level                  number for the log level verbosity

Use "kubeadm upgrade [command] --help" for more information about a command.
查看升级计划

查看升级计划

root@k8s-master1:~# kubeadm upgrade plan
[upgrade/config] Making sure the configuration is correct:
[upgrade/config] Reading configuration from the cluster...
[upgrade/config] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[preflight] Running pre-flight checks.
[upgrade] Making sure the cluster is healthy:
[upgrade] Fetching available versions to upgrade to
[upgrade/versions] Cluster version: v1.17.2
[upgrade/versions] kubeadm version: v1.17.4
I0607 11:59:53.319376   33051 version.go:251] remote version is much newer: v1.18.3; falling back to: stable-1.17
[upgrade/versions] Latest stable version: v1.17.6
[upgrade/versions] Latest version in the v1.17 series: v1.17.6

Components that must be upgraded manually after you have upgraded the control plane with 'kubeadm upgrade apply':
COMPONENT   CURRENT       AVAILABLE
Kubelet     6 x v1.17.2   v1.17.6

Upgrade to the latest version in the v1.17 series:

COMPONENT            CURRENT   AVAILABLE
API Server           v1.17.2   v1.17.6
Controller Manager   v1.17.2   v1.17.6
Scheduler            v1.17.2   v1.17.6
Kube Proxy           v1.17.2   v1.17.6
CoreDNS              1.6.5     1.6.5
Etcd                 3.4.3     3.4.3-0

You can now apply the upgrade by executing the following command:

    kubeadm upgrade apply v1.17.6

Note: Before you can perform this upgrade, you have to update kubeadm to v1.17.6.

_____________________________________________________________________
master升级
非主节点升级

升级前，在在haproxy中修改配置负载均衡配置，取消升级节点的请求

root@ha1:~# cat /etc/haproxy/haproxy.cfg
listen k8s-api-6443
bind 10.203.124.238:6443
mode tcp
server master1 10.203.124.230:6443 check inter 3s fall 3 rise 5	
#server master2 10.203.124.231:6443 check inter 3s fall 3 rise 5	
#server master3 10.203.124.232:6443 check inter 3s fall 3 rise 5	
root@ha1:~# systemctl restart haproxy.service

master3、master2升级

先升级master3，最后升级master1
root@k8s-master3:~# kubeadm upgrade apply v1.17.4


master1主节点升级

master1升级前准备

在master1中，可提前将需要升级的1.17.4版本的image下载到系统上，缩短升级时间
root@k8s-master1:~# cat k8s-1.17.4-images-download.sh
#!/bin/bash
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-controller-manager:v1.17.4
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-apiserver:v1.17.4
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-scheduler:v1.17.4
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kube-proxy:v1.17.4
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.1
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/etcd:3.4.3-0
docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:1.6.5

下载iamges
root@k8s-master1:~# sh k8s-1.17.4-images-download.sh

修改haproxy配置

master1升级前，再次调整haproxy.cfg配置文件，将master1的节点移除，master2、master3添加到haproxy资源组中
root@ha1:~# cat /etc/haproxy/haproxy.cfg
listen k8s-api-6443
bind 10.203.124.238:6443
mode tcp
#server master1 10.203.124.230:6443 check inter 3s fall 3 rise 5	
server master2 10.203.124.231:6443 check inter 3s fall 3 rise 5	
server master3 10.203.124.232:6443 check inter 3s fall 3 rise 5	

root@ha1:~# systemctl restart haproxy.service

master1升级

root@k8s-master1:~# kubeadm upgrade apply v1.17.4


验证镜像

获取主机上pod信息
root@k8s-master1:~# kubectl get pod -A

master升级kubelet、kubectl
root@k8s-master1:~# apt-cache madison kubelet
root@k8s-master1:~# apt-cache madison kubectl
root@k8s-master1:~# apt install kubelet=1.17.4-00 kubectl=1.17.4-00
查看node信息
若kubelet、kubectl升级后，显示的VERSION版本仍旧为旧版本1.17.2，查看kubectl状态，显示没有重新创建etcd pod，则手工删除pod后，重启kubectl服务，则VERSION显示升级后的版本

root@k8s-master1:~# kubectl get nodes
NAME                     STATUS   ROLES    AGE    VERSION
k8s-master1.linux.com   Ready    master   113m   v1.17.2
k8s-master2.linux.com   Ready    master   110m   v1.17.4
k8s-master3.linux.com   Ready    master   109m   v1.17.2
node1.linux.com         Ready    <none>   108m   v1.17.2
node2.linux.com         Ready    <none>   108m   v1.17.2
node3.linux.com         Ready    <none>   108m   v1.17.2

root@k8s-master2:~# systemctl status kubelet


root@k8s-master1:~# kubectl get pod -A
root@k8s-master1:~# kubectl delete pod etcd-k8s-master3.linux.com -n kube-system
pod "etcd-k8s-master3.linux.com" deleted

root@k8s-master1:~# kubectl get nodes
NAME                     STATUS   ROLES    AGE    VERSION
k8s-master1.linux.com   Ready    master   115m   v1.17.4
k8s-master2.linux.com   Ready    master   111m   v1.17.4
k8s-master3.linux.com   Ready    master   111m   v1.17.4
node1.linux.com         Ready    <none>   110m   v1.17.2
node2.linux.com         Ready    <none>   110m   v1.17.2
node3.linux.com         Ready    <none>   110m   v1.17.2

升级 k8s node 服务

验证当前 node 版本信息

node 节点还是 1.17.2 的旧版本

root@k8s-master1:~# kubectl get nodes
NAME                     STATUS   ROLES    AGE    VERSION
k8s-master1.linux.com   Ready    master   115m   v1.17.4
k8s-master2.linux.com   Ready    master   111m   v1.17.4
k8s-master3.linux.com   Ready    master   111m   v1.17.4
node1.linux.com         Ready    <none>   110m   v1.17.2
node2.linux.com         Ready    <none>   110m   v1.17.2
node3.linux.com         Ready    <none>   110m   v1.17.2
升级各 node 节点kubelet

在node节点上升级

root@node1:~# kubeadm upgrade node --kubelet-version 1.17.4

Node 升级 kubectl、kubelet

包含 master 节点在的 kubectl、kubelet 也要升级

root@node1:~# apt install kubelet=1.17.4-00 kubeadm=1.17.4-00

验证node节点的版本
root@k8s-master1:~# kubectl get nodes
NAME                     STATUS   ROLES    AGE    VERSION
k8s-master1.linux.com   Ready    master   131m   v1.17.4
k8s-master2.linux.com   Ready    master   128m   v1.17.4
k8s-master3.linux.com   Ready    master   127m   v1.17.4
node1.linux.com         Ready    <none>   126m   v1.17.4
node2.linux.com         Ready    <none>   126m   v1.17.4
node3.linux.com         Ready    <none>   126m   v1.17.4

测试运行Nginx+Tomcat

https://kubernetes.io/zh/docs/concepts/workloads/controllers/deployment/
运行测试Nginx，并实现动静分离

下载Nginx、Tomcat Image，push到harbor

Nginx
root@k8s-master1:~# docker pull nginx:1.14.2
1.14.2: Pulling from library/nginx
27833a3ba0a5: Pull complete 
0f23e58bd0b7: Pull complete 
8ca774778e85: Pull complete 
Digest: sha256:f7988fb6c02e0ce69257d9bd9cf37ae20a60f1df7563c3a2a6abe24160306b8d
Status: Downloaded newer image for nginx:1.14.2
docker.io/library/nginx:1.14.2
root@k8s-master1:~# docker tag nginx:1.14.2 harbor.linux.com/baseimages/nginx:1.14.2
root@k8s-master1:~# docker push harbor.linux.com/baseimages/nginx:1.14.2
The push refers to repository [harbor.linux.com/baseimages/nginx]
82ae01d5004e: Pushed 
b8f18c3b860b: Pushed 
5dacd731af1b: Pushed 
1.14.2: digest: sha256:706446e9c6667c0880d5da3f39c09a6c7d2114f5a5d6b74a2fafd24ae30d2078 size: 948
Tomcat(Dockfile重做Tomcat Image)
root@k8s-master1:~# docker pull tomcat
Using default tag: latest
latest: Pulling from library/tomcat
376057ac6fa1: Pull complete 
5a63a0a859d8: Pull complete 
496548a8c952: Pull complete 
2adae3950d4d: Pull complete 
0a297eafb9ac: Pull complete 
09a4142c5c9d: Pull complete 
9e78d9befa39: Pull complete 
18f492f90b9c: Pull complete 
7834493ec6cd: Pull complete 
216b2be21722: Pull complete 
Digest: sha256:ce753be7b61d86f877fe5065eb20c23491f783f283f25f6914ba769fee57886b
Status: Downloaded newer image for tomcat:latest
docker.io/library/tomcat:latest

根据pull 下来的iamge，通过dockerfile添加一个Tomcat的访问目录，重新制作image，push到harbor

root@k8s-master1:/usr/local/src/kubeadm# mkdir tomcat-dockerfile
root@k8s-master1:/usr/local/src/kubeadm# cd tomcat-dockerfile/
root@k8s-master1:/usr/local/src/kubeadm/tomcat-dockerfile# vim Dockerfile
FROM tomcat

ADD ./app /usr/local/tomcat/webapps/app/

基于当前目录下Dockerfile Build Image
root@k8s-master1:/usr/local/src/kubeadm/tomcat-dockerfile# docker build -t harbor.linux.com/danran/tomcat:app .
Sending build context to Docker daemon  3.584kB
Step 1/2 : FROM tomcat
 ---> 1b6b1fe7261e
Step 2/2 : ADD ./app /usr/local/tomcat/webapps/app/
 ---> 1438161fa122
Successfully built 1438161fa122
Successfully tagged harbor.linux.com/danran/tomcat:app


root@k8s-master1:/usr/local/src/kubeadm/tomcat-dockerfile# docker push harbor.linux.com/danran/tomcat:app
The push refers to repository [harbor.linux.com/danran/tomcat]
2b7a658772fe: Pushed 
b0ac242ce8d3: Mounted from baseimages/tomcat 
5e71d8e4cd3d: Mounted from baseimages/tomcat 
eb4497d7dab7: Mounted from baseimages/tomcat 
bfbfe00b44fc: Mounted from baseimages/tomcat 
d39111fb2602: Mounted from baseimages/tomcat 
155d997ed77c: Mounted from baseimages/tomcat 
88cfc2fcd059: Mounted from baseimages/tomcat 
760e8d95cf58: Mounted from baseimages/tomcat 
7cc1c2d7e744: Mounted from baseimages/tomcat 
8c02234b8605: Mounted from baseimages/tomcat 
app: digest: sha256:68a9021fa5ed55c75d12abef17d55333d80bd299d867722b9dbd86a3799f8210 size: 2628

运行Nginx

root@k8s-master1:~# cd /usr/local/src/
root@k8s-master1:/usr/local/src# mkdir kubeadm
root@k8s-master1:/usr/local/src# cd kubeadm/
root@k8s-master1:/usr/local/src/kubeadm# mkdir nginx-yml
root@k8s-master1:/usr/local/src/kubeadm# cd nginx-yml/

nginx.yml指定image为harbor仓库
root@k8s-master1:/usr/local/src/kubeadm/nginx-yml# cat nginx.yml
apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx-deployment
  labels:
    app: nginx
spec:
  replicas: 1
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: harbor.linux.com/baseimages/nginx:1.14.2
        ports:
        - containerPort: 80

---
kind: Service
apiVersion: v1
metadata:
  labels:
    app: danran-nginx-service-label
  name: danran-nginx-service
  namespace: default

spec:
  type: NodePort
  ports:
  - name: http
    port: 80
    protocol: TCP
    targetPort: 80
    nodePort: 30004
  selector:
    app: nginx


root@k8s-master1:/usr/local/src/kubeadm/nginx-yml# kubectl apply -f nginx.yml 
deployment.apps/nginx-deployment created
service/danran-nginx-service created

分别向三个nginx pod的index.html写入不同数据，观察访问nginx时的pod的调度

root@k8s-master1:/usr/local/src/kubeadm/nginx-yml# kubectl get pod
NAME                               READY   STATUS    RESTARTS   AGE
nginx-deployment-c55f88b6b-5wkhr   1/1     Running   0          52s
nginx-deployment-c55f88b6b-g2kjs   1/1     Running   0          52s
nginx-deployment-c55f88b6b-z226z   1/1     Running   0          52s
root@k8s-master1:/usr/local/src/kubeadm/nginx-yml# kubectl exec -it nginx-deployment-c55f88b6b-5wkhr bash
root@nginx-deployment-c55f88b6b-5wkhr:/# ls /usr/share/nginx/html/
50x.html  index.html
root@nginx-deployment-c55f88b6b-5wkhr:/# echo pod1 > /usr/share/nginx/html/index.html 
root@nginx-deployment-c55f88b6b-5wkhr:/# exit
exit
root@k8s-master1:/usr/local/src/kubeadm/nginx-yml# kubectl exec -it nginx-deployment-c55f88b6b-g2kjs bash
root@nginx-deployment-c55f88b6b-g2kjs:/# echo pod2 > /usr/share/nginx/html/index.html
root@nginx-deployment-c55f88b6b-g2kjs:/# exit
exit
root@k8s-master1:/usr/local/src/kubeadm/nginx-yml# kubectl exec -it nginx-deployment-c55f88b6b-z226z bash
root@nginx-deployment-c55f88b6b-z226z:/# echo pod3 > /usr/share/nginx/html/index.html
root@nginx-deployment-c55f88b6b-z226z:/# exit
exit

在浏览器中通过访问node节点的地址和Nginx的端口，访问nginx pod(1092.168.1.163为其中一台node的地址)

修改haproxy配置文件，添加Nginx 反向代理

在keepalived中新增一个10.203.124.239 用作Nginx的VIP

root@ha1:~# cat /etc/keepalived/keepalived.conf 
! Configuration File for keepalived

global_defs {
   notification_email {
     acassen
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 10.203.124.230
   smtp_connect_timeout 30
   router_id LVS_DEVEL
}

vrrp_instance VI_1 {
    state MASTER
    interface ens33
    garp_master_delay 10
    smtp_alert
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        10.203.124.238 dev ens33 label ens33:1
        10.203.124.239 dev ens33 label ens33:1
    }
}

root@ha1:~# systemctl restart keepalived.service

haproxy中新增一个用于Nginx的反向代理负载均衡

root@ha1:~# cat /etc/haproxy/haproxy.cfg
listen k8s-nginx
    bind 10.203.124.239:80
    mode tcp
    server master1 10.203.124.233:30004 check inter 3s fall 3 rise 5	
    server master2 10.203.124.234:30004 check inter 3s fall 3 rise 5	
    server master3 10.203.124.235:30004 check inter 3s fall 3 rise 5	
    
10.203.124.239:80 端口已监听
root@ha1:~# systemctl restart haproxy.service 
root@ha1:~# ss -ntl
State                              Recv-Q                              Send-Q                                                            Local Address:Port                                                             Peer Address:Port                              
LISTEN                             0                                   128                                                               127.0.0.53%lo:53                                                                    0.0.0.0:*                                 
LISTEN                             0                                   128                                                                     0.0.0.0:22                                                                    0.0.0.0:*                                 
LISTEN                             0                                   128                                                               10.203.124.238:6443                                                                  0.0.0.0:*                                 
LISTEN                             0                                   128                                                               10.203.124.239:80                                                                    0.0.0.0:*                                 
LISTEN                             0                                   128                                                                        [::]:22                                                                       [::]:*

测试浏览器通过访问Nginx的VIP

运行 tomcat

root@k8s-master1:/usr/local/src/kubeadm/tomcat-dockerfile# cd ..
root@k8s-master1:/usr/local/src/kubeadm# mkdir tomcat-yml
root@k8s-master1:/usr/local/src/kubeadm# cd tomcat-
-bash: cd: tomcat-: No such file or directory
root@k8s-master1:/usr/local/src/kubeadm# cd tomcat-yml/
root@k8s-master1:/usr/local/src/kubeadm/tomcat-yml# cp ../nginx-yml/nginx.yml tomcat.yml

root@k8s-master1:/usr/local/src/kubeadm/tomcat-yml# vim tomcat.yml 
apiVersion: apps/v1
kind: Deployment
metadata:
  name: tomcat-deployment
  labels:
    app: tomcat
spec:
  replicas: 1
  selector:
    matchLabels:
      app: tomcat
  template:
    metadata:
      labels:
        app: tomcat
    spec:
      containers:
      - name: tomcat
        image: harbor.linux.com/danran/tomcat:app
        ports:
        - containerPort: 8080

---
kind: Service
apiVersion: v1
metadata:
  labels:
    app: danran-tomcat-service-label
  name: danran-tomcat-service
  namespace: default

spec:
  type: NodePort
  ports:
  - name: http
    port: 80
    protocol: TCP
    targetPort: 8080
  selector:
    app: tomcat

创建Tomcat Pod

root@k8s-master1:/usr/local/src/kubeadm/tomcat-yml# kubectl apply -f tomcat.yml 
deployment.apps/tomcat-deployment created
service/danran-tomcat-service created

root@k8s-master1:~# kubectl get pod
NAME                                 READY   STATUS    RESTARTS   AGE
nginx-deployment-c55f88b6b-z226z     1/1     Running   0          57m
tomcat-deployment-678684f574-x6g4h   1/1     Running   0          7m1s

dashboard进入到Nginx Pod

在Pod中添加Tomcat的反向代理配置

获取Tomcat的Service Name为danran-tomcat-service，和tomcat pod的IP地址10.10.5.4 
root@k8s-master1:~# kubectl get services
NAME                    TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)        AGE
danran-nginx-service    NodePort    172.16.190.128   <none>        80:30004/TCP   95m
danran-tomcat-service   NodePort    172.16.105.29    <none>        80:30716/TCP   45m
kubernetes              ClusterIP   172.16.0.1       <none>        443/TCP        5h31m

root@k8s-master1:~# kubectl describe service danran-tomcat-service
Name:                     danran-tomcat-service
Namespace:                default
Labels:                   app=danran-tomcat-service-label
Annotations:              kubectl.kubernetes.io/last-applied-configuration:
                            {"apiVersion":"v1","kind":"Service","metadata":{"annotations":{},"labels":{"app":"danran-tomcat-service-label"},"name":"danran-tomcat-serv...
Selector:                 app=tomcat
Type:                     NodePort
IP:                       172.16.105.29
Port:                     http  80/TCP
TargetPort:               8080/TCP
NodePort:                 http  30716/TCP
Endpoints:                10.10.5.4:8080
Session Affinity:         None
External Traffic Policy:  Cluster
Events:                   <none>

将Nginx镜像启动的danran-nginx-service Pod中的/etc/nginx/conf.d/default.conf文件拷贝出来编辑后，将该文件重启使用Dockerfile制作新的镜像，或在danran-nginx-service Pod中在线修改配置文件，然后制作为image，重新启动pod

编辑拷贝至image中的/etc/nginx/conf.d/default.conf配置文件(将Tomcat Pod的Name和IP写入Nginx的代理配置)
root@k8s-master1:/usr/local/src/kubeadm/Nginx-dockerfile# pwd
/usr/local/src/kubeadm/Nginx-dockerfile
root@k8s-master1:/usr/local/src/kubeadm/Nginx-dockerfile# ls
default.conf

在default.conf 中新增proxy_pass到Tomcat的Service
root@k8s-master1:/usr/local/src/kubeadm/Nginx-dockerfile# cat default.conf 
location /app {
proxy_pass http://danran-tomcat-service;
}

编辑Dockerfile文件，制作新的Nginx image
root@k8s-master1:/usr/local/src/kubeadm/Nginx-dockerfile# ls
default.conf  Dockerfile

root@k8s-master1:/usr/local/src/kubeadm/Nginx-dockerfile# vim Dockerfile
FROM harbor.linux.com/baseimages/nginx:1.14.2

ADD default.conf /etc/nginx/conf.d/

root@k8s-master1:/usr/local/src/kubeadm/Nginx-dockerfile# docker build -t harbor.linux.com/baseimages/nginx-tomcat:v1 .
Sending build context to Docker daemon  4.096kB
Step 1/2 : FROM harbor.linux.com/baseimages/nginx:1.14.2
 ---> 295c7be07902
Step 2/2 : ADD default.conf /etc/nginx/conf.d/
 ---> 356359fcd741
Successfully built 356359fcd741
Successfully tagged harbor.linux.com/baseimages/nginx-tomcat:v1

root@k8s-master1:~# docker push harbor.linux.com/baseimages/nginx-tomcat:v1
The push refers to repository [harbor.linux.com/baseimages/nginx-tomcat]
1bd551b21d90: Pushed 
82ae01d5004e: Mounted from baseimages/nginx 
b8f18c3b860b: Mounted from baseimages/nginx 
5dacd731af1b: Mounted from baseimages/nginx 
v1: digest: sha256:eb7d1cce19182025765d49734c1936f273355fdc71a0d02b65cf67aa1734d1f5 size: 1155

重新运行Nginx

修改nginx.yml文件中的image地址为harbor.linux.com/baseimages/nginx-tomcat:v1

root@k8s-master1:/usr/local/src/kubeadm/nginx-yml# cat nginx.yml
apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx-deployment
  labels:
    app: nginx
spec:
  replicas: 1
  selector:
    matchLabels:
      app: nginx
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        image: harbor.linux.com/baseimages/nginx-tomcat:v1
        ports:
        - containerPort: 80

---
kind: Service
apiVersion: v1
metadata:
  labels:
    app: danran-nginx-service-label
  name: danran-nginx-service
  namespace: default

spec:
  type: NodePort
  ports:
  - name: http
    port: 80
    protocol: TCP
    targetPort: 80
    nodePort: 30004
  selector:
    app: nginx

root@k8s-master1:/usr/local/src/kubeadm/nginx-yml# kubectl apply -f nginx.yml 
deployment.apps/nginx-deployment configured
service/danran-nginx-service unchanged

在dashboard中确认Nginx Pod是否使用的nginx-tomcat:v1 Image

浏览器访问Nginx 的VIP，可跳转到Tomcat的界面

kubeadm命令

token 管理

# kubeadm token --help
    create #创建 token，默认有效期 24 小时
    delete #删除 token
    generate #生成并打印 token，但不在服务器上创建，即将 token 用于其他操作
    list #列出服务器所有的 token

显示已有的token
root@k8s-master1:~# kubeadm token list
TOKEN                     TTL         EXPIRES                     USAGES                   DESCRIPTION                                                EXTRA GROUPS
abcdef.0123456789abcdef   1d          2020-06-09T11:03:47+08:00   authentication,signing   <none>                                                     system:bootstrappers:kubeadm:default-node-token

创建token
root@k8s-master1:~# kubeadm token create
W0607 17:12:33.444298    5914 validation.go:28] Cannot validate kube-proxy config - no validator is available
W0607 17:12:33.444396    5914 validation.go:28] Cannot validate kubelet config - no validator is available
rolz9i.aeoaj86ga4p8g03k
root@k8s-master1:~# kubeadm token list
TOKEN                     TTL         EXPIRES                     USAGES                   DESCRIPTION                                                EXTRA GROUPS
abcdef.0123456789abcdef   1d          2020-06-09T11:03:47+08:00   authentication,signing   <none>                                                     system:bootstrappers:kubeadm:default-node-token
rolz9i.aeoaj86ga4p8g03k   23h         2020-06-08T17:12:33+08:00   authentication,signing   <none>                                                     system:bootstrappers:kubeadm:default-node-token

问题

  • kubectl delete flannel

     root@k8s-master1:~# kubectl delete -f kube-flannel.yml 
 podsecuritypolicy.policy "psp.flannel.unprivileged" deleted
 clusterrole.rbac.authorization.k8s.io "flannel" deleted
 clusterrolebinding.rbac.authorization.k8s.io "flannel" deleted
 serviceaccount "flannel" deleted
 configmap "kube-flannel-cfg" deleted
 daemonset.apps "kube-flannel-ds-amd64" deleted
 daemonset.apps "kube-flannel-ds-arm64" deleted
 daemonset.apps "kube-flannel-ds-arm" deleted
 daemonset.apps "kube-flannel-ds-ppc64le" deleted
 daemonset.apps "kube-flannel-ds-s390x" deleted

 root@k8s-master1:~# kubectl apply -f kube-flannel.yml 
 podsecuritypolicy.policy/psp.flannel.unprivileged created
 clusterrole.rbac.authorization.k8s.io/flannel created
 clusterrolebinding.rbac.authorization.k8s.io/flannel created
 serviceaccount/flannel created
 configmap/kube-flannel-cfg created
 daemonset.apps/kube-flannel-ds-amd64 created
 daemonset.apps/kube-flannel-ds-arm64 created
 daemonset.apps/kube-flannel-ds-arm created
 daemonset.apps/kube-flannel-ds-ppc64le created
 daemonset.apps/kube-flannel-ds-s390x created
posted @ 2020-06-23 16:05  JevonWei  阅读(1105)  评论(0)  编辑  收藏  举报