Async/Await - Best Practices in Asynchronous Programming
These days there’s a wealth of information about the new async and await support in the Microsoft .NET Framework 4.5. This article is intended as a “second step” in learning asynchronous programming; I assume that you’ve read at least one introductory article about it. This article presents nothing new, as the same advice can be found online in sources such as Stack Overflow, MSDN forums and the async/await FAQ. This article just highlights a few best practices that can get lost in the avalanche of available documentation.
The best practices in this article are more what you’d call “guidelines” than actual rules. There are exceptions to each of these guidelines. I’ll explain the reasoning behind each guideline so that it’s clear when it does and does not apply. The guidelines are summarized in Figure 1; I’ll discuss each in the following sections.
Figure 1 Summary of Asynchronous Programming Guidelines
| Name | Description | Exceptions |
| Avoid async void | Prefer async Task methods over async void methods | Event handlers |
| Async all the way | Don’t mix blocking and async code | Console main method |
| Configure context | Use ConfigureAwait(false) when you can | Methods that require context |
Avoid Async Void
There are three possible return types for async methods: Task, Task<T> and void, but the natural return types for async methods are just Task and Task<T>. When converting from synchronous to asynchronous code, any method returning a type T becomes an async method returning Task<T>, and any method returning void becomes an async method returning Task. The following code snippet illustrates a synchronous void-returning method and its asynchronous equivalent:
void
MyMethod() { // Do synchronous work. Thread.Sleep(1000); } async Task MyMethodAsync() { // Do asynchronous work. await Task.Delay(1000); }
Void-returning async methods have a specific purpose: to make asynchronous event handlers possible. It is possible to have an event handler that returns some actual type, but that doesn't work well with the language; invoking an event handler that returns a type is very awkward, and the notion of an event handler actually returning something doesn't make much sense. Event handlers naturally return void, so async methods return void so that you can have an asynchronous event handler. However, some semantics of an async void method are subtly different than the semantics of an async Task or async Task<T> method.
Async void methods have different error-handling semantics. When an exception is thrown out of an async Task or async Task<T> method, that exception is captured and placed on the Task object. With async void methods, there is no Task object, so any exceptions thrown out of an async void method will be raised directly on the SynchronizationContext that was active when the async void method started. Figure 2 illustrates that exceptions thrown from async void methods can’t be caught naturally.
AsyncVoidExceptions_CannotBeCaughtByCatch()
{
try { ThrowExceptionAsync(); } catch (Exception) { // The exception is never caught here! throw; } }These exceptions can be observed using AppDomain.UnhandledException or a similar catch-all event for GUI/ASP.NET applications, but using those events for regular exception handling is a recipe for unmaintainability.
Async void methods have different composing semantics. Async methods returning Task or Task<T> can be easily composed using await, Task.WhenAny, Task.WhenAll and so on. Async methods returning void don’t provide an easy way to notify the calling code that they’ve completed. It’s easy to start several async void methods, but it’s not easy to determine when they’ve finished. Async void methods will notify their SynchronizationContext when they start and finish, but a custom SynchronizationContext is a complex solution for regular application code.
Async void methods are difficult to test. Because of the differences in error handling and composing, it’s difficult to write unit tests that call async void methods. The MSTest asynchronous testing support only works for async methods returning Task or Task<T>. It’s possible to install a SynchronizationContext that detects when all async void methods have completed and collects any exceptions, but it’s much easier to just make the async void methods return Task instead.
It’s clear that async void methods have several disadvantages compared to async Task methods, but they’re quite useful in one particular case: asynchronous event handlers. The differences in semantics make sense for asynchronous event handlers. They raise their exceptions directly on the SynchronizationContext, which is similar to how synchronous event handlers behave. Synchronous event handlers are usually private, so they can’t be composed or directly tested. An approach I like to take is to minimize the code in my asynchronous event handler—for example, have it await an async Task method that contains the actual logic. The following code illustrates this approach, using async void methods for event handlers without sacrificing testability:
Async void methods can wreak havoc if the caller isn’t expecting them to be async. When the return type is Task, the caller knows it’s dealing with a future operation; when the return type is void, the caller might assume the method is complete by the time it returns. This problem can crop up in many unexpected ways. It’s usually wrong to provide an async implementation (or override) of a void-returning method on an interface (or base class). Some events also assume that their handlers are complete when they return. One subtle trap is passing an async lambda to a method taking an Action parameter; in this case, the async lambda returns void and inherits all the problems of async void methods. As a general rule, async lambdas should only be used if they’re converted to a delegate type that returns Task (for example, Func<Task>).
To summarize this first guideline, you should prefer async Task to async void. Async Task methods enable easier error-handling, composability and testability. The exception to this guideline is asynchronous event handlers, which must return void. This exception includes methods that are logically event handlers even if they’re not literally event handlers (for example, ICommand.Execute implementations).
Async All the Way
Asynchronous code reminds me of the story of a fellow who mentioned that the world was suspended in space and was immediately challenged by an elderly lady claiming that the world rested on the back of a giant turtle. When the man enquired what the turtle was standing on, the lady replied, “You’re very clever, young man, but it’s turtles all the way down!” As you convert synchronous code to asynchronous code, you’ll find that it works best if asynchronous code calls and is called by other asynchronous code—all the way down (or “up,” if you prefer). Others have also noticed the spreading behavior of asynchronous programming and have called it “contagious” or compared it to a zombie virus. Whether turtles or zombies, it’s definitely true that asynchronous code tends to drive surrounding code to also be asynchronous. This behavior is inherent in all types of asynchronous programming, not just the new async/await keywords.
“Async all the way” means that you shouldn’t mix synchronous and asynchronous code without carefully considering the consequences. In particular, it’s usually a bad idea to block on async code by calling Task.Wait or Task.Result. This is an especially common problem for programmers who are “dipping their toes” into asynchronous programming, converting just a small part of their application and wrapping it in a synchronous API so the rest of the application is isolated from the changes. Unfortunately, they run into problems with deadlocks. After answering many async-related questions on the MSDN forums, Stack Overflow and e-mail, I can say this is by far the most-asked question by async newcomers once they learn the basics: “Why does my partially async code deadlock?”
Figure 3 shows a simple example where one method blocks on the result of an async method. This code will work just fine in a console application but will deadlock when called from a GUI or ASP.NET context. This behavior can be confusing, especially considering that stepping through the debugger implies that it’s the await that never completes. The actual cause of the deadlock is further up the call stack when Task.Wait is called.
delayTask.Wait();
}
}
The root cause of this deadlock is due to the way await handles contexts. By default, when an incomplete Task is awaited, the current “context” is captured and used to resume the method when the Task completes. This “context” is the current SynchronizationContext unless it’s null, in which case it’s the current TaskScheduler. GUI and ASP.NET applications have a SynchronizationContext that permits only one chunk of code to run at a time. When the await completes, it attempts to execute the remainder of the async method within the captured context. But that context already has a thread in it, which is (synchronously) waiting for the async method to complete. They’re each waiting for the other, causing a deadlock.
Note that console applications don’t cause this deadlock. They have a thread pool SynchronizationContext instead of a one-chunk-at-a-time SynchronizationContext, so when the await completes, it schedules the remainder of the async method on a thread pool thread. The method is able to complete, which completes its returned task, and there’s no deadlock. This difference in behavior can be confusing when programmers write a test console program, observe the partially async code work as expected, and then move the same code into a GUI or ASP.NET application, where it deadlocks.
The best solution to this problem is to allow async code to grow naturally through the codebase. If you follow this solution, you’ll see async code expand to its entry point, usually an event handler or controller action. Console applications can’t follow this solution fully because the Main method can’t be async. If the Main method were async, it could return before it completed, causing the program to end. Figure 4 demonstrates this exception to the guideline: The Main method for a console application is one of the few situations where code may block on an asynchronous method.
class
Program { static void Main() { MainAsync().Wait(); } static async Task MainAsync() { try
{
// Asynchronous implementation. await Task.Delay(1000); } catch (Exception ex) { // Handle exceptions.
}
}
}
Allowing async to grow through the codebase is the best solution, but this means there’s a lot of initial work for an application to see real benefit from async code. There are a few techniques for incrementally converting a large codebase to async code, but they’re outside the scope of this article. In some cases, using Task.Wait or Task.Result can help with a partial conversion, but you need to be aware of the deadlock problem as well as the error-handling problem. I’ll explain the error-handling problem now and show how to avoid the deadlock problem later in this article.
Every Task will store a list of exceptions. When you await a Task, the first exception is re-thrown, so you can catch the specific exception type (such as InvalidOperationException). However, when you synchronously block on a Task using Task.Wait or Task.Result, all of the exceptions are wrapped in an AggregateException and thrown. Refer again to Figure 4. The try/catch in MainAsync will catch a specific exception type, but if you put the try/catch in Main, then it will always catch an AggregateException. Error handling is much easier to deal with when you don’t have an AggregateException, so I put the “global” try/catch in MainAsync.
So far, I’ve shown two problems with blocking on async code: possible deadlocks and more-complicated error handling. There’s also a problem with using blocking code within an async method. Consider this simple example:
);
}
}
This method isn’t fully asynchronous. It will immediately yield, returning an incomplete task, but when it resumes it will synchronously block whatever thread is running. If this method is called from a GUI context, it will block the GUI thread; if it’s called from an ASP.NET request context, it will block the current ASP.NET request thread. Asynchronous code works best if it doesn’t synchronously block. Figure 5 is a cheat sheet of async replacements for synchronous operations.
Figure 5 The “Async Way” of Doing Things
| To Do This … | Instead of This … | Use This |
| Retrieve the result of a background task | Task.Wait or Task.Result | await |
| Wait for any task to complete | Task.WaitAny | await Task.WhenAny |
| Retrieve the results of multiple tasks | Task.WaitAll | await Task.WhenAll |
| Wait a period of time | Thread.Sleep | await Task.Delay |
To summarize this second guideline, you should avoid mixing async and blocking code. Mixed async and blocking code can cause deadlocks, more-complex error handling and unexpected blocking of context threads. The exception to this guideline is the Main method for console applications, or—if you’re an advanced user—managing a partially asynchronous codebase.
Configure Context
Earlier in this article, I briefly explained how the “context” is captured by default when an incomplete Task is awaited, and that this captured context is used to resume the async method. The example in Figure 3 shows how resuming on the context clashes with synchronous blocking to cause a deadlock. This context behavior can also cause another problem—one of performance. As asynchronous GUI applications grow larger, you might find many small parts of async methods all using the GUI thread as their context. This can cause sluggishness as responsiveness suffers from “thousands of paper cuts.”
To mitigate this, await the result of ConfigureAwait whenever you can. The following code snippet illustrates the default context behavior and the use of ConfigureAwait:
async
Task MyMethodAsync() { // Code here runs in the original context. await Task.Delay(1000); // Code here runs in the original context. await Task.Delay(1000).ConfigureAwait( continueOnCapturedContext: false); // Code here runs without the original // context (in this case, on the thread pool). }
By using ConfigureAwait, you enable a small amount of parallelism: Some asynchronous code can run in parallel with the GUI thread instead of constantly badgering it with bits of work to do.
Aside from performance, ConfigureAwait has another important aspect: It can avoid deadlocks. Consider Figure 3 again; if you add “ConfigureAwait(false)” to the line of code in DelayAsync, then the deadlock is avoided. This time, when the await completes, it attempts to execute the remainder of the async method within the thread pool context. The method is able to complete, which completes its returned task, and there’s no deadlock. This technique is particularly useful if you need to gradually convert an application from synchronous to asynchronous.
If you can use ConfigureAwait at some point within a method, then I recommend you use it for every await in that method after that point. Recall that the context is captured only if an incomplete Task is awaited; if the Task is already complete, then the context isn’t captured. Some tasks might complete faster than expected in different hardware and network situations, and you need to graciously handle a returned task that completes before it’s awaited. Figure 6 shows a modified example.
async
Task MyMethodAsync() { // Code here runs in the original context. await Task.FromResult(1); // Code here runs in the original context. await Task.FromResult(1).ConfigureAwait(continueOnCapturedContext: false); // Code here runs in the original context. var random = new Random(); int delay = random.Next(2); // Delay is either 0 or 1 await Task.Delay(delay).ConfigureAwait(continueOnCapturedContext: false); // Code here might or might not run in the original context. // The same is true when you await any Task // that might complete very quickly. }
{
// Can't use ConfigureAwait here ... await Task.Delay(1000); } finally
{
// Because we need the context here. button1.Enabled = true
;
}
}
Each async method has its own context, so if one async method calls another async method, their contexts are independent. Figure 8 shows a minor modification of Figure 7.
{
// Can't use ConfigureAwait here. await HandleClickAsync(); } finally
{
// We are back on the original context for this method. button1.Enabled = true
;
}
}
Context-free code is more reusable. Try to create a barrier in your code between the context-sensitive code and context-free code, and minimize the context-sensitive code. In Figure 8, I recommend putting all the core logic of the event handler within a testable and context-free async Task method, leaving only the minimal code in the context-sensitive event handler. Even if you’re writing an ASP.NET application, if you have a core library that’s potentially shared with desktop applications, consider using ConfigureAwait in the library code.
To summarize this third guideline, you should use ConfigureAwait when possible. Context-free code has better performance for GUI applications and is a useful technique for avoiding deadlocks when working with a partially async codebase. The exceptions to this guideline are methods that require the context.
Know Your Tools
There’s a lot to learn about async and await, and it’s natural to get a little disoriented. Figure 9 is a quick reference of solutions to common problems.
Figure 9 Solutions to Common Async Problems
| Problem | Solution |
| Create a task to execute code | Task.Run or TaskFactory.StartNew (not the Task constructor or Task.Start) |
| Create a task wrapper for an operation or event | TaskFactory.FromAsync or TaskCompletionSource<T> |
| Support cancellation | CancellationTokenSource and CancellationToken |
| Report progress | IProgress<T> and Progress<T> |
| Handle streams of data | TPL Dataflow or Reactive Extensions |
| Synchronize access to a shared resource | SemaphoreSlim |
| Asynchronously initialize a resource | AsyncLazy<T> |
| Async-ready producer/consumer structures | TPL Dataflow or AsyncCollection<T> |
The first problem is task creation. Obviously, an async method can create a task, and that’s the easiest option. If you need to run code on the thread pool, use Task.Run. If you want to create a task wrapper for an existing asynchronous operation or event, use TaskCompletionSource<T>. The next common problem is how to handle cancellation and progress reporting. The base class library (BCL) includes types specifically intended to solve these issues: CancellationTokenSource/CancellationToken and IProgress<T>/Progress<T>. Asynchronous code should use the Task-based Asynchronous Pattern, or TAP (msdn.microsoft.com/library/hh873175), which explains task creation, cancellation and progress reporting in detail.
Another problem that comes up is how to handle streams of asynchronous data. Tasks are great, but they can only return one object and only complete once. For asynchronous streams, you can use either TPL Dataflow or Reactive Extensions (Rx). TPL Dataflow creates a “mesh” that has an actor-like feel to it. Rx is more powerful and efficient but has a more difficult learning curve. Both TPL Dataflow and Rx have async-ready methods and work well with asynchronous code.
Just because your code is asynchronous doesn’t mean that it’s safe. Shared resources still need to be protected, and this is complicated by the fact that you can’t await from inside a lock. Here’s an example of async code that can corrupt shared state if it executes twice, even if it always runs on the same thread:
int
value; Task<int> GetNextValueAsync(int current); async Task UpdateValueAsync() { value = await
GetNextValueAsync(value);
}
The problem is that the method reads the value and suspends itself at the await, and when the method resumes it assumes the value hasn’t changed. To solve this problem, the SemaphoreSlim class was augmented with the async-ready WaitAsync overloads. Figure 10 demonstrates SemaphoreSlim.WaitAsync.
{
value
= await GetNextValueAsync(value); } finally
{
mutex.Release();
}
}
Asynchronous code is often used to initialize a resource that’s then cached and shared. There isn’t a built-in type for this, but Stephen Toub developed an AsyncLazy<T> that acts like a merge of Task<T> and Lazy<T>. The original type is described on his blog (bit.ly/dEN178), and an updated version is available in my AsyncEx library (nitoasyncex.codeplex.com).
Finally, some async-ready data structures are sometimes needed. TPL Dataflow provides a BufferBlock<T> that acts like an async-ready producer/consumer queue. Alternatively, AsyncEx provides AsyncCollection<T>, which is an async version of BlockingCollection<T>.
I hope the guidelines and pointers in this article have been helpful. Async is a truly awesome language feature, and now is a great time to start using it!
Stephen Cleary is a husband, father and programmer living in northern Michigan. He has worked with multithreading and asynchronous programming for 16 years and has used async support in the Microsoft .NET Framework since the first CTP. His home page, including his blog, is at stephencleary.com.
Thanks to the following technical expert for reviewing this article: Stephen Toub
Stephen Toub works on the Visual Studio team at Microsoft. He specializes in areas related to parallelism and asynchrony.
Refer:
Async Programming : Introduction to Async/Await on ASP.NET
https://msdn.microsoft.com/magazine/dn802603.aspx
Best Practices in Asynchronous Programming
https://msdn.microsoft.com/magazine/jj991977.aspx
Using Asynchronous Methods in ASP.NET MVC 4
http://www.asp.net/mvc/overview/performance/using-asynchronous-methods-in-aspnet-mvc-4
Async/Await FAQ
http://blogs.msdn.com/b/pfxteam/archive/2012/04/12/async-await-faq.aspx
http://blog.stephencleary.com/2014/04/a-tour-of-task-part-0-overview.html
高效地使用async/await
http://www.ituring.com.cn/article/73091
异步性能：了解 Async 和 Await 的成本
https://msdn.microsoft.com/zh-cn/magazine/hh456402.aspx
Best practice to call ConfigureAwait for all server-side code
http://stackoverflow.com/questions/13489065/best-practice-to-call-configureawait-for-all-server-side-code
