LSI RAID卡开机出现The following VDs are missing: 000

The following VDs are missing: 000

If you proceed (or load the configuration utility), these VDs will be removed from your configuration.

If you wish to use them at a later time, they will have to be imported. If you believe these VDs should be present, power off your system and check your cables to make sure all disks are present.

Press any key to continue, or press C to load the configuration utility.

原因：控制器无法找到已配置的硬盘。

处理方法：

• 检查已配置的硬盘是否在位、连接是否正常。
• 进入BIOS，查看这些设备是否有显示。
• 确保硬盘已启动并有电源供应。
• 如果有背板，检查连接器，确保硬盘有电源供应。