retrying模块
API 介绍
1 def __init__(self, 2 stop=None, wait=None, 3 stop_max_attempt_number=None, 4 stop_max_delay=None, 5 wait_fixed=None, 6 wait_random_min=None, wait_random_max=None, 7 wait_incrementing_start=None, wait_incrementing_increment=None, 8 wait_exponential_multiplier=None, wait_exponential_max=None, 9 retry_on_exception=None, 10 retry_on_result=None, 11 wrap_exception=False, 12 stop_func=None, 13 wait_func=None, 14 wait_jitter_max=None)
- stop_max_attempt_number:用来设定最大的尝试次数,超过该次数就停止重试
- stop_max_delay:比如设置成10000,那么从被装饰的函数开始执行的时间点开始,到函数成功运行结束或者失败报错中止的时间点,只要这段时间超过10秒,函数就不会再执行了
- wait_fixed:设置在两次retrying之间的停留时间
- wait_random_min和wait_random_max:用随机的方式产生两次retrying之间的停留时间
- wait_exponential_multiplier和wait_exponential_max:以指数的形式产生两次retrying之间的停留时间,产生的值为2^previous_attempt_number * wait_exponential_multiplier,previous_attempt_number是前面已经retry的次数,如果产生的这个值超过了wait_exponential_max的大小,那么之后两个retrying之间的停留值都为wait_exponential_max
- 我们可以指定要在出现哪些异常的时候再去retry,这个要用retry_on_exception传入一个函数对象
例子:
- @retry装饰器,如出现异常会一直重试
1 @retry 2 def never_give_up_never_surrender(): 3 print "Retry forever ignoring Exceptions, don't wait between retries"
- stop_max_attempt_number 设置最大重试次数
1 @retry(stop_max_attempt_number=7) 2 def stop_after_7_attempts(): 3 print "Stopping after 7 attempts" 4 raise
- stop_max_delay 设置失败重试的最大时间, 单位毫秒,超出时间,则停止重试
1 @retry(stop_max_delay=10000) 2 def stop_after_10_s(): 3 print "Stopping after 10 seconds" 4 raise
- wait_fixed 设置失败重试的间隔时间
@retry(wait_fixed=2000, stop_max_delay=10000) def wait_2_s(): print "Wait 2 second between retries" raise
- wait_random_min, wait_random_max 设置失败重试随机性间隔时间
1 @retry(wait_random_min=1000, wait_random_max=5000, stop_max_delay=10000) 2 def wait_random_1_to_5_s(): 3 print "Randomly wait 1 to 5 seconds between retries" 4 raise
- wait_exponential_multiplier-间隔时间倍数增加,wait_exponential_max-最大间隔时间
import time @retry(wait_exponential_multiplier=1000, wait_exponential_max=10000) def wait_exponential_1000(): print "Wait 2^x * 1000 milliseconds between each retry, up to 10 seconds, then 10 seconds afterwards" print int(time.time()) raise
输出: Wait 2^x * 1000 milliseconds between each retry, up to 10 seconds, then 10 seconds afterwards 1504110314 Wait 2^x * 1000 milliseconds between each retry, up to 10 seconds, then 10 seconds afterwards 1504110316 Wait 2^x * 1000 milliseconds between each retry, up to 10 seconds, then 10 seconds afterwards 1504110320 Wait 2^x * 1000 milliseconds between each retry, up to 10 seconds, then 10 seconds afterwards 1504110328 Wait 2^x * 1000 milliseconds between each retry, up to 10 seconds, then 10 seconds afterwards 1504110338 Wait 2^x * 1000 milliseconds between each retry, up to 10 seconds, then 10 seconds afterwards 1504110348
- retry_on_exception指定异常类型,指定的异常类型会重试,不指定的类型,会直接异常退出,wrap_exception参数设置为True,则其他类型异常,或包裹在RetryError中,会看到RetryError和程序抛的Exception error
def retry_if_io_error(exception): """Return True if we should retry (in this case when it's an IOError), False otherwise""" return isinstance(exception, IOError) @retry(retry_on_exception=retry_if_io_error) def might_io_error(): print "Retry forever with no wait if an IOError occurs, raise any other errors" raise Exception('a') @retry(retry_on_exception=retry_if_io_error, wrap_exception=True) def only_raise_retry_error_when_not_io_error(): print "Retry forever with no wait if an IOError occurs, raise any other errors wrapped in RetryError" raise Exception('a')
- retry_on_result, 指定要在得到哪些结果的时候去retry,retry_on_result传入一个函数对象,在执行get_result成功后,会将函数的返回值通过形参result的形式传入retry_if_result_none函数中,如果返回值是None那么就进行retry,否则就结束并返回函数值
1 def retry_if_result_none(result): 2 return result is None 3 4 @retry(retry_on_result=retry_if_result_none) 5 def get_result(): 6 print 'Retry forever ignoring Exceptions with no wait if return value is None' 7 return None
转载自:https://www.cnblogs.com/wangwei916797941/articles/10370062.html
--------------------成功,肯定是需要一点一滴积累的--------------------