同步FIFO的Verilog代码
同步FIFO的Verilog代码
上一篇 / 下一篇 2009-10-25 22:39:06 / 个人分类：FPGA设计基础知识
http://www.edabc.net/blog/?uid-20-action-viewspace-itemid-584
http://www.edabc.net/blog/?uid-26-action-viewspace-itemid-602
/******************************************************
Afifocontrollerverilogdescription.
******************************************************/
module fifo_syn(datain,
rd,
wr,
rst,
clk,
dataout,
full,
empty);
input [7:0] datain;
input rd, wr, rst, clk;
output [7:0] dataout;
output full, empty;
reg [7:0] dataout;
reg full_in, empty_in;
reg [7:0] mem [15:0];
reg [3:0] rp, wp;
assign full = full_in;
assign empty = empty_in;
// memory read out 稍作修改
always@(posedge clk) begin
if(rd && ~empty_in) dataout = mem[rp];
end
// memory write in
always@(posedge clk) begin
if(wr && ~full_in) mem[wp]<=datain;
end
// memory write pointer increment
always@(posedge clk or negedge rst)
if(!rst)
wp<=0;
else wp <= (wr && ~full_in) ? (wp + 1'b1) : wp;
// memory read pointer increment
always@(posedge clk or negedge rst)
if(!rst)
rp <= 0;
else rp <= (rd && ~empty_in)? (rp + 1'b1): rp;
// Full signal generate
always@(posedge clk or negedge rst) begin
if(!rst) full_in <= 1'b0;
else begin
if( (~rd && wr)&&((wp==rp-1)||(rp==4'h0&&wp==4'hf)))
full_in <= 1'b1;
else if(full_in && rd) full_in <= 1'b0;
end
end
// Empty signal generate
always@(posedge clk or negedge rst) begin
if(!rst) empty_in <= 1'b1;
else begin
if((rd&&~wr)&&(rp==wp-1 || (rp==4'hf&&wp==4'h0)))
empty_in<=1'b1;
else if(empty_in && wr) empty_in<=1'b0;
end
end
endmodule
*******************************************************************************
网上的代码读数据输出(dataout)部分不受读使能(rd)控制，显然不对，所以稍作修改，欢迎批评
**************************************************************************************
另一种风格的同步FIFO
module FIFO_Buffer(
Data_out,
stack_full,
stack_almost_full,
stack_half_full,
stack_almost_empty,
stack_empty,
Data_in,
write_to_stack,
read_from_stack,
clk,rst
);
parameter stack_width=32;
parameter stack_height=8;
parameter stack_ptr_width=3;
parameter AE_level=2;
parameter AF_level=6;
parameter HF_level=4;
output [stack_width-1:0] Data_out;
output stack_full,stack_almost_full,stack_half_full;
output stack_almost_empty,stack_empty;
input[stack_width-1:0] Data_in;
input write_to_stack,read_from_stack;
input clk,rst;
reg[stack_ptr_width-1:0] read_ptr,write_ptr;
reg[stack_ptr_width:0] ptr_gap;
reg[stack_width-1:0] Data_out;
reg[stack_width-1:0] stack[stack_height-1:0];
assign stack_full=(ptr_gap==stack_height);
assign stack_almost_full=(ptr_gap==AF_level);
assign stack_half_full=(ptr_gap==HF_level);
assign stack_almost_empty=(ptr_gap==AE_level);
assign stack_empty=(ptr_gap==0);
always @(posedge clk or posedge rst)
if(rst)begin
Data_out<=0;
read_ptr<=0;
write_ptr<=0;
ptr_gap<=0;
end
else if(write_to_stack &&(!stack_full)&&(!read_from_stack))begin
stack[write_ptr]<=Data_in;
write_ptr<=write_ptr+1;
ptr_gap<=ptr_gap+1;
end
else if((!write_to_stack)&&(!stack_empty)&&read_from_stack)begin
Data_out<=stack[read_ptr];
read_ptr<=read_ptr+1;
ptr_gap<=ptr_gap-1;
end
else if(write_to_stack &&read_from_stack&&stack_empty)begin
stack[write_ptr]<=Data_in;
write_ptr<=write_ptr+1;
ptr_gap<=ptr_gap+1;
end
else if(write_to_stack &&read_from_stack&&stack_full)begin
Data_out<=stack[read_ptr];
read_ptr<=read_ptr+1;
ptr_gap<=ptr_gap-1;
end
else if(write_to_stack&&read_from_stack&&(!stack_full)&&(!stack_empty))
begin
Data_out<=stack[read_ptr];
stack[write_ptr]<=Data_in;
read_ptr<=read_ptr+1;
write_ptr<=write_ptr+1;
end
endmodule
