window和linux(centos7)安装mysql5.7

window mysql 安装步骤

  • 社区版本下载地址： https://dev.mysql.com/downloads/file/?id=474802

  • 下载完成后，得到mysql-installer-web-community-5.7.21.0.msi文件，双击安装

  • 进入安装界面，下一步

  • 勾选server only 或者 Developer Default都可以，这里勾选仅服务器形式安装，然后下一步

  • 点击execute后，等待下载完成并自动安装

  • 安装完成后，一直点击下一步，直到出现设置root用户密码的界面

  • 设置完密码后,继续下一步， 到如下页面后，若白色圆圈中都是绿色则代表成功，否则出现红色就说明本地环境有问题。默认数据端口就是3306

  • 打开开始mysql默认命令行客户端，测试是否安装成功

  • 至此，window环境下mysql安装完成


linux mysql 安装步骤

CentOS 7 版本将MySQL数据库软件从默认的程序列表中移除，用MariaDB代替了，MariaDB数据库管理系统是MySQL的一个分支，主要由开源社区在维护，采用GPL授权许可。开发这个分支的原因之一是：甲骨文公司收购了MySQL后，有将MySQL闭源的潜在风险，因此社区采用分支的方式来避开这个风险。MariaDB的目的是完全兼容MySQL，包括API和命令行，使之能轻松成为MySQL的代替品

  • 卸载centos7自带的MariaDB

    [root@VM_0_9_centos ~]# yum list installed | grep mariadb #检查mariadb是否已安装
Repository epel is listed more than once in the configuration
mariadb-libs.x86_64                   1:5.5.52-1.el7                 @anaconda  

[root@VM_0_9_centos ~]# yum -y remove mariadb*   #全部卸载
Loaded plugins: fastestmirror, langpacks
Repository epel is listed more than once in the configuration
Resolving Dependencies
--> Running transaction check
---> Package mariadb-libs.x86_64 1:5.5.52-1.el7 will be erased
--> Processing Dependency: libmysqlclient.so.18()(64bit) for package: 2:postfix-2.10.1-6.el7.x86_64
--> Processing Dependency: libmysqlclient.so.18(libmysqlclient_18)(64bit) for package: 2:postfix-2.10.1-6.el7.x86_64
--> Running transaction check
---> Package postfix.x86_64 2:2.10.1-6.el7 will be erased
--> Finished Dependency Resolution
##########################省略中间部分####################
Removed:
  mariadb-libs.x86_64 1:5.5.52-1.el7     
  
Dependency Removed:
  postfix.x86_64 2:2.10.1-6.el7                                                                                                                                                                                     
Complete!

  • 下载并安装mysql的YUM源

    • 下载mysql的yum源
    wget -P /home/wuzhazha http://dev.mysql.com/get/mysql57-community-release-el7-11.noarch.rpm
    • 安装mysql的YUM源
    rpm -ivh mysql57-community-release-el7-11.noarch.rpm

    [root@VM_0_9_centos home]# rpm -ivh mysql57-community-release-el7-11.noarch.rpm
warning: mysql57-community-release-el7-11.noarch.rpm: Header V3 DSA/SHA1 Signature, key ID 5072e1f5: NOKEY
Preparing...                          ################################# [100%]
Updating / installing...
1:mysql57-community-release-el7-11 ################################# [100%]
    • 检查mysql的YUM源是否安装成功
    yum repolist enabled | grep "mysql.*-community.*" 

    [root@VM_0_9_centos home]# yum repolist enabled | grep "mysql.*-community.*" 
Repository epel is listed more than once in the configuration
mysql-connectors-community/x86_64 MySQL Connectors Community                 131
mysql-tools-community/x86_64      MySQL Tools Community                      100
mysql57-community/x86_64          MySQL 5.7 Community Server                 384

    看到上图所示表示安装成功

    • 查看mysql版本
    yum repolist all | grep mysql

    [root@VM_0_9_centos home]# yum repolist all | grep mysql
Repository epel is listed more than once in the configuration
mysql-cluster-7.5-community/x86_64 MySQL Cluster 7.5 Community   disabled
mysql-cluster-7.5-community-source MySQL Cluster 7.5 Community - disabled
mysql-cluster-7.6-community/x86_64 MySQL Cluster 7.6 Community   disabled
mysql-cluster-7.6-community-source MySQL Cluster 7.6 Community - disabled
mysql-connectors-community/x86_64  MySQL Connectors Community    enabled:    131
mysql-connectors-community-source  MySQL Connectors Community -  disabled
mysql-tools-community/x86_64       MySQL Tools Community         enabled:    100
mysql-tools-community-source       MySQL Tools Community - Sourc disabled
mysql-tools-preview/x86_64         MySQL Tools Preview           disabled
mysql-tools-preview-source         MySQL Tools Preview - Source  disabled
mysql55-community/x86_64           MySQL 5.5 Community Server    disabled
mysql55-community-source           MySQL 5.5 Community Server -  disabled
mysql56-community/x86_64           MySQL 5.6 Community Server    disabled
mysql56-community-source           MySQL 5.6 Community Server -  disabled
mysql57-community/x86_64           MySQL 5.7 Community Server    enabled:    384
mysql57-community-source           MySQL 5.7 Community Server -  disabled
mysql80-community/x86_64           MySQL 8.0 Community Server    disabled
mysql80-community-source           MySQL 8.0 Community Server -  disabled

    可以看到，默认5.7是启用的版本。可以通过类似下面的语句来启动或禁用某些版本

    yum-config-manager --enable mysql57-community
yum-config-manager --disable mysql56-community

    或者通过修改vim /etc/yum.repos.d/mysql-community.repo文件，改变默认安装的mysql版本。比如要安装5.6版本，将5.7源的enabled=1改成enabled=0，然后再将5.6源的enabled=0改成enabled=1即可 。

    注意，任何时候，只能启用一个版本 。查看当前的启用的 MySQL 版本：yum repolist enabled | grep mysql

    [root@VM_0_9_centos home]# yum repolist enabled | grep mysql
Repository epel is listed more than once in the configuration
mysql-connectors-community/x86_64 MySQL Connectors Community                 131
mysql-tools-community/x86_64      MySQL Tools Community                      100
mysql57-community/x86_64          MySQL 5.7 Community Server                 384

  • 安装mysql

    安装过程中一直输入"y"就可以了，当出现下面的结果时，就代表mysql数据库安装成功

    yum install mysql-community-server

  • 启动mysql服务

    systemctl start mysqld

  • 进入mysql命令行

    [root@VM_0_9_centos ~]# mysql 
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)

    出现上述错误，说明mysql安装完后给root用户生成了一个默认密码，所以你需要使用密码登录。

    为了加强安全性，MySQL5.7为root用户随机生成了一个密码，如果安装的是RPM包，则默认是在/var/log/mysqld.log中。

    [root@VM_0_9_centos ~]# grep 'temporary password' /var/log/mysqld.log 
2019-11-04T06:34:15.567040Z 1 [Note] A temporary password is generated for root@localhost: NsRSsti#+7Vw

    密码为NsRSsti#+7Vw

    [root@VM_0_9_centos ~]# mysql -uroot -pNsRSsti#+7Vw
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 4
Server version: 5.7.28

Copyright (c) 2000, 2019, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

    出现上述提示，则表示登录成功！

    接下来执行use mysql可能会出现如下错误

    mysql> use mysql
ERROR 1820 (HY000): You must reset your password using ALTER USER statement before executing this statement.

    因此，在使用前就必须修改密码

  • 修改mysql密码

    alter user 'root'@'localhost' identified by '123456';
# mysqladmin -u root password 'Root123456' 
#set password for 'root'@'localhost' = password('123456');

    可能出现如下问题

    mysql>alter user 'root'@'localhost' identified by 'Root123456';
ERROR 1819 (HY000): Your password does not satisfy the current policy requirements

    这是由于设置的密码不符合当前的密码策略，两种处理方式：1.设置符合当前密码策略的复杂密码；2.修改策略，依然使用弱密码（自己玩的话就没啥所谓）

    这里就以方式2为例：

    密码策略主要跟 validate_password_policy 取值有关,默认取值为MEDIUM,

    密码长度主要跟validate_password_length取值有关，默认值为8

    更改两个策略，1是允许弱密码，2是更改默认的密码长度

    set global validate_password_policy=LOW;
set global validate_password_length=6; #最小值为4，设置小于4也会被重置为4

    mysql> set global validate_password_policy=LOW;
Query OK, 0 rows affected (0.00 sec)

mysql> set global validate_password_length=6;
Query OK, 0 rows affected (0.00 sec)

mysql> SHOW VARIABLES LIKE 'validate_password%' #查看密码策略

    策略更改成功，继续修改密码

    mysql> alter user 'root'@'localhost' identified by 'Root123456';
Query OK, 0 rows affected (0.00 sec)

    如上，修改密码成功！

  • 修改数据库字符集,默认latinl

    mysql> SHOW VARIABLES LIKE 'character%'

    默认服务器的字符器是 latin1 ，对中文不友好。修改 /etc/my.cnf 文件，添加字符集的设置

    [root@VM_0_9_centos ~]# vim  /etc/my.cnf 

[mysql]
default-character-set=utf8 # 添加部分

# For advice on how to change settings please see
# http://dev.mysql.com/doc/refman/5.7/en/server-configuration-defaults.html

[mysqld]
character_set_server=utf8 # 添加部分
#
# Remove leading # and set to the amount of RAM for the most important data
# cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%.
# innodb_buffer_pool_size = 128M
#
# Remove leading # to turn on a very important data integrity option: logging
# changes to the binary log between backups.
# log_bin
#
# Remove leading # to set options mainly useful for reporting servers.
# The server defaults are faster for transactions and fast SELECTs.
# Adjust sizes as needed, experiment to find the optimal values.
# join_buffer_size = 128M
# sort_buffer_size = 2M
# read_rnd_buffer_size = 2M
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock

# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0

log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid

    修改完成后，重启mysql，systemctl restart mysqld

    如上，更改成功！

  • 需要开启远程访问（参考）

    • 防火墙设置
    #远程访问 MySQL， 需开放默认端口号 3306
firewall-cmd --permanent --zone=public --add-port=3306/tcp
firewall-cmd --permanent --zone=public --add-port=3306/udp

firewall-cmd --reload #使最新的防火墙设置规则生效
    • 创建用户并授予权限

    创建一个普通用户 sa ，密码是123456；给这个用户授予 SELECT,INSERT,UPDATE,DELETE 的远程访问的权限，这个账号一般用于提供给实施的系统访问

    CREATE USER 'sa'@'%' IDENTIFIED BY '123456'; 
GRANT SELECT,INSERT,UPDATE,DELETE ON *.* TO 'sa'@'%';

    创建一个管理员用户 admin 账号 ，密码是 123456 ；给这个用户授予所有的远程访问的权限。这个用户主要用于管理整个数据库、备份、还原等操作

    CREATE USER 'admin'@'%' IDENTIFIED BY '123456'; 
GRANT ALL PRIVILEGES ON *.* TO 'admin'@'%';
    • 设置用户 root 的访问权限
    #可以在任意 IP 下被访问
grant all privileges on *.* to root@"%" identified by "密码";
#如果上述执行完并flush privileges还是不生效，可以换成以下方式
update user set host='%' where user='root'

#设置用户 root 可以在本地被访问
grant all privileges on *.* to root@"localhost" identified by "密码";
    • 使授权立刻生效（以上授权操作最好都附加上该语句）
    flush privileges;

  • 常用命令

    systemctl start mysqld  #启动mysqld
systemctl stop mysqld  #停止mysqld
systemctl restart mysqld  #重启mysqld
systemctl enable mysqld  #设置开机启动
systemctl status mysqld  #查看 MySQL Server 状态

参考

posted @ 2019-11-04 16:33  didi516  阅读(187)  评论(0)  编辑  收藏  举报