Mikrotik ROS默认推荐防火墙规则firewall脚本
一、先配置接口列表
/interface list add comment=defconf name=WAN add comment=defconf name=LAN /interface list member add interface=lan list=LAN add interface=wan list=WAN add interface=pppoe-out1 list=WAN
二、配置IPv4 防火墙规则
/ip firewall filter add action=accept chain=input comment="accept ping" protocol=icmp add action=accept chain=input comment="accept established,related,untracked" connection-state=established,related,untracked /ip firewall filter add action=drop chain=input comment="drop invalid" connection-state=invalid add action=drop chain=input comment="drop all from WAN" in-interface-list=WAN add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related add action=accept chain=forward comment="accept established,related, untracked" connection-state=established,related,untracked add action=drop chain=forward comment="drop invalid" connection-state=invalid add action=drop chain=forward comment="drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new in-interface-list=WAN
防止端口扫描
/ip firewall filter add chain=input protocol=tcp psd=21,3s,3,1 action=add-src-to-address-list address-list="port scanners" address-list-timeout=14d comment="Port scanners to list" disabled=no add chain=input protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg action=add-src-to-address-list address-list="port scanners" address-list-timeout=14d comment="NMAP FIN Stealth scan" add chain=input protocol=tcp tcp-flags=fin,syn action=add-src-to-address-list address-list="port scanners" address-list-timeout=14d comment="SYN/FIN scan" add chain=input protocol=tcp tcp-flags=syn,rst action=add-src-to-address-list address-list="port scanners" address-list-timeout=14d comment="SYN/RST scan" add chain=input protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack action=add-src-to-address-list address-list="port scanners" address-list-timeout=14d comment="FIN/PSH/URG scan" add chain=input protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg action=add-src-to-address-list address-list="port scanners" address-list-timeout=14d comment="ALL/ALL scan" add chain=input protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg action=add-src-to-address-list address-list="port scanners" address-list-timeout=14d comment="NMAP NULL scan" add chain=input src-address-list="port scanners" action=drop comment="dropping port scanners" disabled=no
三、配置IPv6 防火墙规则，如果有使用ipv6的
ipv6 firewall address-list add address=::/128 comment="defconf: unspecified address" list=bad_ipv6 add address=::1/128 comment="defconf: lo" list=bad_ipv6 add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6 add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6 add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6 add address=100::/64 comment="defconf: discard only " list=bad_ipv6 add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6 add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6 add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6 add address=::224.0.0.0/100 comment="defconf: other" list=bad_ipv6 add address=::127.0.0.0/104 comment="defconf: other" list=bad_ipv6 add address=::/104 comment="defconf: other" list=bad_ipv6 add address=::255.0.0.0/104 comment="defconf: other" list=bad_ipv6 /ipv6 firewall filter add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid add action=accept chain=input comment="defconf: accept ICMPv6" protocol=icmpv6 add action=accept chain=input comment="defconf: accept UDP traceroute" port=33434-33534 protocol=udp add action=accept chain=input comment="defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=udp src-address=fe80::/16 add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 protocol=udp add action=accept chain=input comment="defconf: accept ipsec AH" protocol=ipsec-ah add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=ipsec-esp add action=accept chain=input comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec add action=drop chain=input comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN add action=accept chain=forward comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid add action=drop chain=forward comment="defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6 add action=drop chain=forward comment="defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6 add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" hop-limit=equal:1 protocol=icmpv6 add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=icmpv6 add action=accept chain=forward comment="defconf: accept HIP" protocol=139 add action=accept chain=forward comment="defconf: accept IKE" dst-port=500,4500 protocol=udp add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=ipsec-ah add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=ipsec-esp add action=accept chain=forward comment="defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec add action=drop chain=forward comment="defconf: drop everything else not coming from LAN" in-interface-list=!LAN
