Hierarchical Token Bucket
例子一:
# tc qdisc add dev eth0 root handle 1: htb default 30 # tc class add dev eth0 parent 1: classid 1:1 htb rate 6mbit burst 15k # tc class add dev eth0 parent 1:1 classid 1:10 htb rate 5mbit burst 15k # tc class add dev eth0 parent 1:1 classid 1:20 htb rate 3mbit ceil 6mbit burst 15k # tc class add dev eth0 parent 1:1 classid 1:30 htb rate 1kbit ceil 6mbit burst 15k
The author then recommends SFQ for beneath these classes:
# tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 # tc qdisc add dev eth0 parent 1:20 handle 20: sfq perturb 10 # tc qdisc add dev eth0 parent 1:30 handle 30: sfq perturb 10
Add the filters which direct traffic to the right classes:
# U32="tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32" # $U32 match ip dport 80 0xffff flowid 1:10 # $U32 match ip sport 25 0xffff flowid 1:20
同一个root class下的子类可以相互借流量,如果直接不在qdisc下面创建一个root,而是直接创建三个class,他们之间是不能相互借流量的。
例子二:
tc qdisc add dev eth0 root handle 1: htb default 12
- This command attaches queue discipline HTB to eth0 and gives it the "handle" 1:.
- This is just a name or identifier with which to refer to it below.
- The default 12 means that any traffic that is not otherwise classified will be assigned to class 1:12.
tc class add dev eth0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 30kbps ceil 100kbps
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbps ceil 100kbps
tc class add dev eth0 parent 1:1 classid 1:12 htb rate 60kbps ceil 100kbps
The first line creates a "root" class, 1:1 under the qdisc 1:. The definition of a root class is one with the htb qdisc as its parent.
同一个root class下的子类可以相互借流量,如果直接不在qdisc下面创建一个root,而是直接创建三个class,他们之间是不能相互借流量的。
tc qdisc add dev eth0 parent 1:10 handle 20: pfifo limit 5 tc qdisc add dev eth0 parent 1:11 handle 30: pfifo limit 5 tc qdisc add dev eth0 parent 1:12 handle 40: sfq perturb 10
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 1.2.3.4 match ip dport 80 0xffff flowid 1:10
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 1.2.3.4 flowid 1:11
-------------------------
No pains, no gains