Xhorse Dolphin XP005 Cut a B89 Key for Chevrolet Trailblazer
Hi, everybody, today I’m going to use Xhorse Dolphin XP005 Key Cutting Machine to demonstrate how to cut a B89 key for Chevrolet Trailblazer lock.
Having been read out key bitting codes, let’s start to cut by bitting directly.
This is Xhorse Key Tool Max used to control Dolphin XP005, you may also control it on a smart phone with Xhorse app installed.
Connect Key Tool Max with Dolphin XP005, press
Cut by bitting >> IIco – B89 >> OK
Input key bitting codes: 1231232342
Fix key blank flat on M1 clamp tip align 5 position as prompted.
Go back to Key Tool Max, press
Cutting key >> Continue
Dolphin XP005 starts working…
Wait until key cutting was finished.
Clean the scraps, take out the key to have a try.
It does work, it can open the lock normally.
Key cutting was done!
This is using Dolphin XP005 Automatic Machine to cut a B89 key for Chevy Trailblazer successfully!
