web.xml的说明
<!--
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
Copyright 2000-2007 Sun Microsystems, Inc. All rights reserved.
The contents of this file are subject to the terms of either the GNU
General Public License Version 2 only ("GPL") or the Common Development
and Distribution License("CDDL") (collectively, the "License"). You
may not use this file except in compliance with the License. You can obtain
a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html
or glassfish/bootstrap/legal/LICENSE.txt. See the License for the specific
language governing permissions and limitations under the License.
When distributing the software, include this License Header Notice in each
file and include the License file at glassfish/bootstrap/legal/LICENSE.txt.
Sun designates this particular file as subject to the "Classpath" exception
as provided by Sun in the GPL Version 2 section of the License file that
accompanied this code. If applicable, add the following below the License
Header, with the fields enclosed by brackets [] replaced by your own
identifying information: "Portions Copyrighted [year]
[name of copyright owner]"
Contributor(s):
If you wish your version of this file to be governed by only the CDDL or
only the GPL Version 2, indicate your decision by adding "[Contributor]
elects to include this software in this distribution under the [CDDL or GPL
Version 2] license." If you don't indicate a single choice of license, a
recipient has the option to distribute your version of this file under
either the CDDL, the GPL Version 2 or to extend the choice of license to
its licensees as provided above. However, if you add GPL Version 2 code
and therefore, elected the GPL Version 2 license, then the option applies
only if the new code is made subject to such option by the copyright
holder.
-->
<!--
This is the XML DTD for the Servlet 2.3 deployment descriptor.
All Servlet 2.3 deployment descriptors must include a DOCTYPE
of the following form:
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
-->
<!--
The following conventions apply to all J2EE deployment descriptor
elements unless indicated otherwise.
- In elements that contain PCDATA, leading and trailing whitespace
in the data may be ignored.
- In elements whose value is an "enumerated type", the value is
case sensitive.
- In elements that specify a pathname to a file within the same
JAR file, relative filenames (i.e., those not starting with "/")
are considered relative to the root of the JAR file's namespace.
Absolute filenames (i.e., those starting with "/") also specify
names in the root of the JAR file's namespace. In general, relative
names are preferred. The exception is .war files where absolute
names are preferred for consistency with the servlet API.
-->
<!--
The web-app element is the root of the deployment descriptor for
a web application.
-->
<!--
The auth-constraint element indicates the user roles that should
be permitted access to this resource collection. The role-name
used here must either correspond to the role-name of one of the
security-role elements defined for this web application, or be
the specially reserved role-name "*" that is a compact syntax for
indicating all roles in the web application. If both "*" and
rolenames appear, the container interprets this as all roles.
If no roles are defined, no user is allowed access to the portion of
the web application described by the containing security-constraint.
The container matches role names case sensitively when determining
access.
Used in: security-constraint
-->
<!--
The auth-method element is used to configure the authentication
mechanism for the web application. As a prerequisite to gaining access to any web resources which are protected by an authorization
constraint, a user must have authenticated using the configured
mechanism. Legal values for this element are "BASIC", "DIGEST",
"FORM", or "CLIENT-CERT".
Used in: login-config
-->
<!--
The context-param element contains the declaration of a web
application's servlet context initialization parameters.
Used in: web-app
-->
<!--
The description element is used to provide text describing the parent
element. The description element should include any information that
the web application war file producer wants to provide to the consumer of
the web application war file (i.e., to the Deployer). Typically, the tools
used by the web application war file consumer will display the description
when processing the parent element that contains the description.
Used in: auth-constraint, context-param, ejb-local-ref, ejb-ref,
env-entry, filter, init-param, resource-env-ref, resource-ref, run-as,
security-role, security-role-ref, servlet, user-data-constraint,
web-app, web-resource-collection
-->
<!--
The display-name element contains a short name that is intended to be
displayed by tools. The display name need not be unique.
Used in: filter, security-constraint, servlet, web-app
Example:
<display-name>Employee Self Service</display-name>
-->
<!--
The distributable element, by its presence in a web application
deployment descriptor, indicates that this web application is
programmed appropriately to be deployed into a distributed servlet
container
Used in: web-app
-->
<!--
The ejb-link element is used in the ejb-ref or ejb-local-ref
elements to specify that an EJB reference is linked to an
enterprise bean.
The name in the ejb-link element is composed of a
path name specifying the ejb-jar containing the referenced enterprise
bean with the ejb-name of the target bean appended and separated from
the path name by "#". The path name is relative to the war file
containing the web application that is referencing the enterprise bean.
This allows multiple enterprise beans with the same ejb-name to be
uniquely identified.
Used in: ejb-local-ref, ejb-ref
Examples:
<ejb-link>EmployeeRecord</ejb-link>
<ejb-link>../products/product.jar#ProductEJB</ejb-link>
-->
<!--
The ejb-local-ref element is used for the declaration of a reference to
an enterprise bean's local home. The declaration consists of:
- an optional description
- the EJB reference name used in the code of the web application
that's referencing the enterprise bean
- the expected type of the referenced enterprise bean
- the expected local home and local interfaces of the referenced
enterprise bean
- optional ejb-link information, used to specify the referenced
enterprise bean
Used in: web-app
-->
<!--
The ejb-ref element is used for the declaration of a reference to
an enterprise bean's home. The declaration consists of:
- an optional description
- the EJB reference name used in the code of
the web application that's referencing the enterprise bean
- the expected type of the referenced enterprise bean
- the expected home and remote interfaces of the referenced
enterprise bean
- optional ejb-link information, used to specify the referenced
enterprise bean
Used in: web-app
-->
<!--
The ejb-ref-name element contains the name of an EJB reference. The
EJB reference is an entry in the web application's environment and is
relative to the java:comp/env context. The name must be unique
within the web application.
It is recommended that name is prefixed with "ejb/".
Used in: ejb-local-ref, ejb-ref
Example:
<ejb-ref-name>ejb/Payroll</ejb-ref-name>
-->
<!--
The ejb-ref-type element contains the expected type of the
referenced enterprise bean.
The ejb-ref-type element must be one of the following:
<ejb-ref-type>Entity</ejb-ref-type>
<ejb-ref-type>Session</ejb-ref-type>
Used in: ejb-local-ref, ejb-ref
-->
<!--
The env-entry element contains the declaration of a web application's
environment entry. The declaration consists of an optional
description, the name of the environment entry, and an optional
value. If a value is not specified, one must be supplied
during deployment.
-->
<!--
The env-entry-name element contains the name of a web applications's
environment entry. The name is a JNDI name relative to the
java:comp/env context. The name must be unique within a web application.
Example:
<env-entry-name>minAmount</env-entry-name>
Used in: env-entry
-->
<!--
The env-entry-type element contains the fully-qualified Java type of
the environment entry value that is expected by the web application's
code.
The following are the legal values of env-entry-type:
java.lang.Boolean
java.lang.Byte
java.lang.Character
java.lang.String
java.lang.Short
java.lang.Integer
java.lang.Long
java.lang.Float
java.lang.Double
Used in: env-entry
-->
<!--
The env-entry-value element contains the value of a web application's
environment entry. The value must be a String that is valid for the
constructor of the specified type that takes a single String
parameter, or for java.lang.Character, a single character.
Example:
<env-entry-value>100.00</env-entry-value>
Used in: env-entry
-->
<!--
The error-code contains an HTTP error code, ex: 404
Used in: error-page
-->
<!--
The error-page element contains a mapping between an error code
or exception type to the path of a resource in the web application
Used in: web-app
-->
<!--
The exception type contains a fully qualified class name of a
Java exception type.
Used in: error-page
-->
<!--
The extension element contains a string describing an
extension. example: "txt"
Used in: mime-mapping
-->
<!--
Declares a filter in the web application. The filter is mapped to
either a servlet or a URL pattern in the filter-mapping element, using
the filter-name value to reference. Filters can access the
initialization parameters declared in the deployment descriptor at
runtime via the FilterConfig interface.
Used in: web-app
-->
<!--
The fully qualified classname of the filter.
Used in: filter
-->
<!--
Declaration of the filter mappings in this web application. The
container uses the filter-mapping declarations to decide which filters
to apply to a request, and in what order. The container matches the
request URI to a Servlet in the normal way. To determine which filters
to apply it matches filter-mapping declarations either on servlet-name,
or on url-pattern for each filter-mapping element, depending on which
style is used. The order in which filters are invoked is the order in
which filter-mapping declarations that match a request URI for a
servlet appear in the list of filter-mapping elements.The filter-name
value must be the value of the <filter-name> sub-elements of one of the
<filter> declarations in the deployment descriptor.
Used in: web-app
-->
<!--
The logical name of the filter. This name is used to map the filter.
Each filter name is unique within the web application.
Used in: filter, filter-mapping
-->
<!--
The form-error-page element defines the location in the web app
where the error page that is displayed when login is not successful
can be found. The path begins with a leading / and is interpreted
relative to the root of the WAR.
Used in: form-login-config
-->
<!--
The form-login-config element specifies the login and error pages
that should be used in form based login. If form based authentication
is not used, these elements are ignored.
Used in: login-config
-->
<!--
The form-login-page element defines the location in the web app
where the page that can be used for login can be found. The path
begins with a leading / and is interpreted relative to the root of the WAR.
Used in: form-login-config
-->
<!--
The home element contains the fully-qualified name of the enterprise
bean's home interface.
Used in: ejb-ref
Example:
<home>com.aardvark.payroll.PayrollHome</home>
-->
<!--
The http-method contains an HTTP method (GET | POST |...).
Used in: web-resource-collection
-->
<!--
The icon element contains small-icon and large-icon elements that
specify the file names for small and a large GIF or JPEG icon images
used to represent the parent element in a GUI tool.
Used in: filter, servlet, web-app
-->
<!--
The init-param element contains a name/value pair as an
initialization param of the servlet
Used in: filter, servlet
-->
<!--
The jsp-file element contains the full path to a JSP file within
the web application beginning with a `/'.
Used in: servlet
-->
<!--
The large-icon element contains the name of a file
containing a large (32 x 32) icon image. The file
name is a relative path within the web application's
war file.
The image may be either in the JPEG or GIF format.
The icon can be used by tools.
Used in: icon
Example:
<large-icon>employee-service-icon32x32.jpg</large-icon>
-->
<!--
The listener element indicates the deployment properties for a web
application listener bean.
Used in: web-app
-->
<!--
The listener-class element declares a class in the application must be
registered as a web application listener bean. The value is the fully qualified classname of the listener class.
Used in: listener
-->
<!--
The load-on-startup element indicates that this servlet should be
loaded (instantiated and have its init() called) on the startup
of the web application. The optional contents of
these element must be an integer indicating the order in which
the servlet should be loaded. If the value is a negative integer,
or the element is not present, the container is free to load the
servlet whenever it chooses. If the value is a positive integer
or 0, the container must load and initialize the servlet as the
application is deployed. The container must guarantee that
servlets marked with lower integers are loaded before servlets
marked with higher integers. The container may choose the order
of loading of servlets with the same load-on-start-up value.
Used in: servlet
-->
<!--
The local element contains the fully-qualified name of the
enterprise bean's local interface.
Used in: ejb-local-ref
-->
<!--
The local-home element contains the fully-qualified name of the
enterprise bean's local home interface.
Used in: ejb-local-ref
-->
<!--
The location element contains the location of the resource in the web
application relative to the root of the web application. The value of
the location must have a leading `/'.
Used in: error-page
-->
<!--
The login-config element is used to configure the authentication
method that should be used, the realm name that should be used for
this application, and the attributes that are needed by the form login
mechanism.
Used in: web-app
-->
<!--
The mime-mapping element defines a mapping between an extension
and a mime type.
Used in: web-app
-->
<!--
The mime-type element contains a defined mime type. example:
"text/plain"
Used in: mime-mapping
-->
<!--
The param-name element contains the name of a parameter. Each parameter
name must be unique in the web application.
Used in: context-param, init-param
-->
<!--
The param-value element contains the value of a parameter.
Used in: context-param, init-param
-->
<!--
The realm name element specifies the realm name to use in HTTP
Basic authorization.
Used in: login-config
-->
<!--
The remote element contains the fully-qualified name of the enterprise
bean's remote interface.
Used in: ejb-ref
Example:
<remote>com.wombat.empl.EmployeeService</remote>
-->
<!--
The res-auth element specifies whether the web application code signs
on programmatically to the resource manager, or whether the Container
will sign on to the resource manager on behalf of the web application. In the
latter case, the Container uses information that is supplied by the
Deployer.
The value of this element must be one of the two following:
<res-auth>Application</res-auth>
<res-auth>Container</res-auth>
Used in: resource-ref
-->
<!--
The res-ref-name element specifies the name of a resource manager
connection factory reference. The name is a JNDI name relative to the
java:comp/env context. The name must be unique within a web application.
Used in: resource-ref
-->
<!--
The res-sharing-scope element specifies whether connections obtained
through the given resource manager connection factory reference can be
shared. The value of this element, if specified, must be one of the
two following:
<res-sharing-scope>Shareable</res-sharing-scope>
<res-sharing-scope>Unshareable</res-sharing-scope>
The default value is Shareable.
Used in: resource-ref
-->
<!--
The res-type element specifies the type of the data source. The type
is specified by the fully qualified Java language class or interface
expected to be implemented by the data source.
Used in: resource-ref
-->
<!--
The resource-env-ref element contains a declaration of a web application's
reference to an administered object associated with a resource
in the web application's environment. It consists of an optional
description, the resource environment reference name, and an
indication of the resource environment reference type expected by
the web application code.
Used in: web-app
Example:
<resource-env-ref>
<resource-env-ref-name>jms/StockQueue</resource-env-ref-name>
<resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
</resource-env-ref>
-->
<!--
The resource-env-ref-name element specifies the name of a resource
environment reference; its value is the environment entry name used in
the web application code. The name is a JNDI name relative to the
java:comp/env context and must be unique within a web application.
Used in: resource-env-ref
-->
<!--
The resource-env-ref-type element specifies the type of a resource
environment reference. It is the fully qualified name of a Java
language class or interface.
Used in: resource-env-ref
-->
<!--
The resource-ref element contains a declaration of a web application's
reference to an external resource. It consists of an optional
description, the resource manager connection factory reference name,
the indication of the resource manager connection factory type
expected by the web application code, the type of authentication
(Application or Container), and an optional specification of the
shareability of connections obtained from the resource (Shareable or
Unshareable).
Used in: web-app
Example:
<resource-ref>
<res-ref-name>jdbc/EmployeeAppDB</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
<res-sharing-scope>Shareable</res-sharing-scope>
</resource-ref>
-->
<!--
The role-link element is a reference to a defined security role. The
role-link element must contain the name of one of the security roles
defined in the security-role elements.
Used in: security-role-ref
-->
<!--
The role-name element contains the name of a security role.
The name must conform to the lexical rules for an NMTOKEN.
Used in: auth-constraint, run-as, security-role, security-role-ref
-->
<!--
The run-as element specifies the run-as identity to be used for the
execution of the web application. It contains an optional description, and
the name of a security role.
Used in: servlet
-->
<!--
The security-constraint element is used to associate security
constraints with one or more web resource collections
Used in: web-app
-->
<!--
The security-role element contains the definition of a security
role. The definition consists of an optional description of the
security role, and the security role name.
Used in: web-app
Example:
<security-role>
<description>
This role includes all employees who are authorized
to access the employee service application.
</description>
<servlet>
<description>This is the description of my J2EE component</description>
<display-name>This is the display name of my J2EE component</display-name>
<servlet-name>Test</servlet-name>
<servlet-class>Test</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Test</servlet-name>
<url-pattern>/servlet/Test</url-pattern>
</servlet-mapping>
<role-name>employee</role-name>
</security-role>
-->
<!--
The security-role-ref element contains the declaration of a security
role reference in the web application's code. The declaration consists
of an optional description, the security role name used in the code,
and an optional link to a security role. If the security role is not
specified, the Deployer must choose an appropriate security role.
The value of the role-name element must be the String used as the
parameter to the EJBContext.isCallerInRole(String roleName) method
or the HttpServletRequest.isUserInRole(String role) method.
Used in: servlet
-->
<!--
The servlet element contains the declarative data of a
servlet. If a jsp-file is specified and the load-on-startup element is
present, then the JSP should be precompiled and loaded.
Used in: web-app
-->
<!--
The servlet-class element contains the fully qualified class name
of the servlet.
Used in: servlet
-->
<!--
The servlet-mapping element defines a mapping between a servlet
and a url pattern
Used in: web-app
-->
<!--
The servlet-name element contains the canonical name of the
servlet. Each servlet name is unique within the web application.
Used in: filter-mapping, servlet, servlet-mapping
-->
<!--
The session-config element defines the session parameters for
this web application.
Used in: web-app
-->
<!--
The session-timeout element defines the default session timeout
interval for all sessions created in this web application. The
specified timeout must be expressed in a whole number of minutes.
If the timeout is 0 or less, the container ensures the default
behaviour of sessions is never to time out.
Used in: session-config
-->
<!--
The small-icon element contains the name of a file
containing a small (16 x 16) icon image. The file
name is a relative path within the web application's
war file.
The image may be either in the JPEG or GIF format.
The icon can be used by tools.
Used in: icon
Example:
<small-icon>employee-service-icon16x16.jpg</small-icon>
-->
<!--
The taglib element is used to describe a JSP tag library.
Used in: web-app
-->
<!--
the taglib-location element contains the location (as a resource
relative to the root of the web application) where to find the Tag
Libary Description file for the tag library.
Used in: taglib
-->
<!--
The taglib-uri element describes a URI, relative to the location
of the web.xml document, identifying a Tag Library used in the Web
Application.
Used in: taglib
-->
<!--
The transport-guarantee element specifies that the communication
between client and server should be NONE, INTEGRAL, or
CONFIDENTIAL. NONE means that the application does not require any
transport guarantees. A value of INTEGRAL means that the application
requires that the data sent between the client and server be sent in
such a way that it can't be changed in transit. CONFIDENTIAL means
that the application requires that the data be transmitted in a
fashion that prevents other entities from observing the contents of
the transmission. In most cases, the presence of the INTEGRAL or
CONFIDENTIAL flag will indicate that the use of SSL is required.
Used in: user-data-constraint
-->
<!--
The url-pattern element contains the url pattern of the mapping. Must
follow the rules specified in Section 11.2 of the Servlet API
Specification.
Used in: filter-mapping, servlet-mapping, web-resource-collection
-->
<!--
The user-data-constraint element is used to indicate how data
communicated between the client and container should be protected.
Used in: security-constraint
-->
<!--
The web-resource-collection element is used to identify a subset
of the resources and HTTP methods on those resources within a web
application to which a security constraint applies. If no HTTP methods
are specified, then the security constraint applies to all HTTP
methods.
Used in: security-constraint
-->
<!--
The web-resource-name contains the name of this web resource
collection.
Used in: web-resource-collection
-->
<!--
The welcome-file element contains file name to use as a default
welcome file, such as index.html
Used in: welcome-file-list
-->
<!--
The welcome-file-list contains an ordered list of welcome files
elements.
Used in: web-app
-->
<!--
The ID mechanism is to allow tools that produce additional deployment
information (i.e., information beyond the standard deployment
descriptor information) to store the non-standard information in a
separate file, and easily refer from these tool-specific files to the
information in the standard deployment descriptor.
Tools are not allowed to add the non-standard information into the
standard deployment descriptor.
-->