opencv使用convexityDefects计算轮廓凸缺陷
引自：http://www.xuebuyuan.com/1684976.html
http://blog.csdn.net/lichengyu/article/details/38392473
http://www.cnblogs.com/yemeishu/archive/2013/01/19/2867286.html谈谈NITE 2与OpenCV结合提取指尖坐标
一 概念：
Convexity hull, Convexity defects
如上图所示，黑色的轮廓线为convexity hull, 而convexity hull与手掌之间的部分为convexity defects. 每个convexity defect区域有四个特征量：起始点（startPoint），结束点(endPoint)，距离convexity hull最远点(farPoint)，最远点到convexity hull的距离(depth)。
二．OpenCV中的相关函数
void convexityDefects(InputArray contour, InputArray convexhull, OutputArrayconvexityDefects)
参数：
coutour: 输入参数，检测到的轮廓，可以调用findContours函数得到；
convexhull: 输入参数，检测到的凸包，可以调用convexHull函数得到。注意，convexHull函数可以得到vector<vector<Point>>和vector<vector<int>>两种类型结果，这里的convexhull应该为vector<vector<int>>类型，否则通不过ASSERT检查；
convexityDefects：输出参数，检测到的最终结果，应为vector<vector<Vec4i>>类型，Vec4i存储了起始点（startPoint），结束点(endPoint)，距离convexity hull最远点(farPoint)以及最远点到convexity hull的距离(depth)
三．代码
//http://docs.opencv.org/doc/tutorials/imgproc/shapedescriptors/hull/hull.html
//http://www.codeproject.com/Articles/782602/Beginners-guide-to-understand-Fingertips-counting
#include "opencv2/highgui/highgui.hpp"
#include "opencv2/imgproc/imgproc.hpp"
#include <iostream>
#include <stdio.h>
#include <stdlib.h>
using namespace cv;
using namespace std;
Mat src; Mat src_gray;
int thresh = 100;
int max_thresh = 255;
RNG rng(12345);
/// Function header
void thresh_callback(int, void* );
/** @function main */
int main( int argc, char** argv )
{
/// Load source image and convert it to gray
src = imread( argv[1], 1 );
/// Convert image to gray and blur it
cvtColor( src, src_gray, CV_BGR2GRAY );
blur( src_gray, src_gray, Size(3,3) );
/// Create Window
char* source_window = "Source";
namedWindow( source_window, CV_WINDOW_AUTOSIZE );
imshow( source_window, src );
createTrackbar( " Threshold:", "Source", &thresh, max_thresh, thresh_callback );
thresh_callback( 0, 0 );
waitKey(0);
return(0);
}
/** @function thresh_callback */
void thresh_callback(int, void* )
{
Mat src_copy = src.clone();
Mat threshold_output;
vector<vector<Point> > contours;
vector<Vec4i> hierarchy;
/// Detect edges using Threshold
threshold( src_gray, threshold_output, thresh, 255, THRESH_BINARY );
/// Find contours
findContours( threshold_output, contours, hierarchy, CV_RETR_TREE, CV_CHAIN_APPROX_SIMPLE, Point(0, 0) );
/// Find the convex hull object for each contour
vector<vector<Point> >hull( contours.size() );
// Int type hull
vector<vector<int>> hullsI( contours.size() );
// Convexity defects
vector<vector<Vec4i>> defects( contours.size() );
for( size_t i = 0; i < contours.size(); i++ )
{
convexHull( Mat(contours[i]), hull[i], false );
// find int type hull
convexHull( Mat(contours[i]), hullsI[i], false );
// get convexity defects
convexityDefects(Mat(contours[i]),hullsI[i], defects[i]);
}
/// Draw contours + hull results
Mat drawing = Mat::zeros( threshold_output.size(), CV_8UC3 );
for( size_t i = 0; i< contours.size(); i++ )
{
Scalar color = Scalar( rng.uniform(0, 255), rng.uniform(0,255), rng.uniform(0,255) );
drawContours( drawing, contours, i, color, 1, 8, vector<Vec4i>(), 0, Point() );
drawContours( drawing, hull, i, color, 1, 8, vector<Vec4i>(), 0, Point() );
// draw defects
size_t count = contours[i].size();
std::cout<<"Count : "<<count<<std::endl;
if( count < 300 )
continue;
vector<Vec4i>::iterator d =defects[i].begin();
while( d!=defects[i].end() ) {
Vec4i& v=(*d);
//if(IndexOfBiggestContour == i)
{
int startidx=v[0];
Point ptStart( contours[i][startidx] ); // point of the contour where the defect begins
int endidx=v[1];
Point ptEnd( contours[i][endidx] ); // point of the contour where the defect ends
int faridx=v[2];
Point ptFar( contours[i][faridx] );// the farthest from the convex hull point within the defect
int depth = v[3] / 256; // distance between the farthest point and the convex hull
if(depth > 20 && depth < 80)
{
line( drawing, ptStart, ptFar, CV_RGB(0,255,0), 2 );
line( drawing, ptEnd, ptFar, CV_RGB(0,255,0), 2 );
circle( drawing, ptStart, 4, Scalar(255,0,100), 2 );
circle( drawing, ptEnd, 4, Scalar(255,0,100), 2 );
circle( drawing, ptFar, 4, Scalar(100,0,255), 2 );
}
/*printf("start(%d,%d) end(%d,%d), far(%d,%d)\n",
ptStart.x, ptStart.y, ptEnd.x, ptEnd.y, ptFar.x, ptFar.y);*/
}
d++;
}
}
/// Show in a window
namedWindow( "Hull demo", CV_WINDOW_AUTOSIZE );
imshow( "Hull demo", drawing );
//imwrite("convexity_defects.jpg", drawing);
}
另一个版本的说法
首先介绍今天主角：void convexityDefects(InputArray contour, InputArray、convexhull, OutputArray convexityDefects)
使用时注意，最后一个参数 convexityDefects 是存储 Vec4i 的向量(vector<varname>)，函数计算成功后向量的大小是轮廓凸缺陷的数量，向量每个元素Vec4i存储了4个整型数据，因为Vec4i对[]实现了重载，所以可以使用 _vectername[i][0] 来访问向量 _vactername的第i个元素的第一个分量。再说 Vec4i 中存储的四个整形数据，
Opencv 使用这四个元素表示凸缺陷，
第一个名字叫做
start_index,表示缺陷在轮廓上的开始处，他的值是开始点在函数第一个参数 contour 中的下标索引；
Vec4i 第二个元素的名字叫
end_index， 顾名思义其对应的值就是缺陷结束处在 contour 中的下标索引；
Vec4i 第三个元素
farthest_pt_index 是缺陷上距离 轮廓凸包(convexhull)最远的点；
Vec4i最后的元素叫
fixpt_depth，fixpt_depth/256 表示了
轮廓上以 farthest_pt_index 为下标的点到 轮廓凸包的(convexhull)的距离,以像素为单位。
All is so easy!下面就是简单的代码示例（首先计算两个轮廓的凸包，然后计算两个轮廓的凸缺陷）:
// 计算凸缺陷 convexityDefect
//
#include "stdafx.h"
#include <opencv.hpp>
#include <iostream>
using namespace std;
using namespace cv;
int _tmain(int argc, _TCHAR* argv[])
{
Mat *img_01 = new Mat(400, 400, CV_8UC3);
Mat *img_02 = new Mat(400, 400, CV_8UC3);
*img_01 = Scalar::all(0);
*img_02 = Scalar::all(0);
// 轮廓点组成的数组
vector<Point> points_01,points_02;
// 给轮廓组赋值
points_01.push_back(Point(10, 10));points_01.push_back(Point(10,390));
points_01.push_back(Point(390, 390));points_01.push_back(Point(150, 250));
points_02.push_back(Point(10, 10));points_02.push_back(Point(10,390));
points_02.push_back(Point(390, 390));points_02.push_back(Point(250, 150));
vector<int> hull_01,hull_02;
// 计算凸包
convexHull(points_01, hull_01, true);
convexHull(points_02, hull_02, true);
// 绘制轮廓
for(int i=0;i < 4;++i)
{
circle(*img_01, points_01[i], 3, Scalar(0,255,255), CV_FILLED, CV_AA);
circle(*img_02, points_02[i], 3, Scalar(0,255,255), CV_FILLED, CV_AA);
}
// 绘制凸包轮廓
CvPoint poi_01 = points_01[hull_01[hull_01.size()-1]];
for(int i=0;i < hull_01.size();++i)
{
line(*img_01, poi_01, points_01[i], Scalar(255,255,0), 1, CV_AA);
poi_01 = points_01[i];
}
CvPoint poi_02 = points_02[hull_02[hull_02.size()-1]];
for(int i=0;i < hull_02.size();++i)
{
line(*img_02, poi_02, points_02[i], Scalar(255,255,0), 1, CV_AA);
poi_02 = points_02[i];
}
vector<Vec4i> defects;
// 如果有凸缺陷就把它画出来
if( isContourConvex(points_01) )
{
cout<<"img_01的轮廓是凸包"<<endl;
}else{
cout<<"img_01的轮廓不是凸包"<<endl;
convexityDefects(
points_01,
Mat(hull_01),
defects
);
// 绘制缺陷
cout<<"共"<<defects.size()<<"处缺陷"<<endl;
for(int i=0;i < defects.size();++i)
{
circle(*img_01, points_01[defects[i][0]], 6, Scalar(255,0,0), 2, CV_AA);
circle(*img_01, points_01[defects[i][1]], 6, Scalar(255,0,0), 2, CV_AA);
circle(*img_01, points_01[defects[i][2]], 6, Scalar(255,0,0), 2, CV_AA);
line(*img_01, points_01[defects[i][0]], points_01[defects[i][1]], Scalar(255,0,0), 1, CV_AA);
line(*img_01, points_01[defects[i][1]], points_01[defects[i][2]], Scalar(255,0,0), 1, CV_AA);
line(*img_01, points_01[defects[i][2]], points_01[defects[i][0]], Scalar(255,0,0), 1, CV_AA);
cout<<"第"<<i<<"缺陷<"<<points_01[defects[i][0]].x<<","<<points_01[defects[i][0]].y
<<">,<"<<points_01[defects[i][1]].x<<","<<points_01[defects[i][1]].y
<<">,<"<<points_01[defects[i][2]].x<<","<<points_01[defects[i][2]].y<<">到轮廓的距离为："<<defects[i][3]/256<<"px"<<endl;
}
defects.clear();
}
if( isContourConvex( points_02 ) )
{
cout<<"img_02的轮廓是凸包"<<endl;
}else{
cout<<"img_02的轮廓不是凸包"<<endl;
vector<Vec4i> defects;
convexityDefects(
points_01,
Mat(hull_01),
defects
);
// 绘制出缺陷的轮廓
for(int i=0;i < defects.size();++i)
{
circle(*img_02, points_01[defects[i][0]], 6, Scalar(255,0,0), 2, CV_AA);
circle(*img_02, points_01[defects[i][1]], 6, Scalar(255,0,0), 2, CV_AA);
circle(*img_02, points_01[defects[i][2]], 6, Scalar(255,0,0), 2, CV_AA);
line(*img_02, points_01[defects[i][0]], points_01[defects[i][1]], Scalar(255,0,0), 1, CV_AA);
line(*img_02, points_01[defects[i][1]], points_01[defects[i][2]], Scalar(255,0,0), 1, CV_AA);
line(*img_02, points_01[defects[i][2]], points_01[defects[i][0]], Scalar(255,0,0), 1, CV_AA);
// 因为 img_02 没有缺陷所以就懒的写那些输出代码了
}
defects.clear();
}
imshow("img_01 的轮廓和凸包：", *img_01);
imshow("img_02 的轮廓和凸包：", *img_02);
cvWaitKey();
return 0;
}
