《动手学深度学习 Pytorch版》 7.7 稠密连接网络

7.7.1 从 ResNet 到 DenseNet

DenseNet 可以视为 ResNet 的逻辑扩展。

ResNet 将函数展开为 f(x)=x+g(x)，即一个简单的线性项和一个复杂的非线性项。

若将 f 拓展成超过两部分，则 DenseNet 便是其中一种方案。这即是 DenseNet 和 ResNet 的主要区别。

image

DenseNet 这个名字由变量之间的“稠密连接”而得来。主要由两部分构成：

  • 稠密块：定义如何连接输入和输出。

  • 过渡层：控制通道数量，使其不会太复杂。

何为稠密连接？即最后一层与之前的所有层紧密相连,DenseNet 输出是连接执行从 x 到其展开式的映射：

x→[x,f1(x),f2([x,f1(x)]),f3([x,f1(x),f2([x,f1(x)])],…)]

image

7.7.2 稠密块体

import torch
from torch import nn
from d2l import torch as d2l

def conv_block(input_channels, num_channels):
    return nn.Sequential(
        nn.BatchNorm2d(input_channels), nn.ReLU(),
        nn.Conv2d(input_channels, num_channels, kernel_size=3, padding=1))

class DenseBlock(nn.Module):
    def __init__(self, num_convs, input_channels, num_channels):
        super(DenseBlock, self).__init__()
        layer = []
        for i in range(num_convs):
            layer.append(conv_block(  # 输入通道按稠密连接调整
                num_channels * i + input_channels, num_channels))
        self.net = nn.Sequential(*layer)

    def forward(self, X):
        for blk in self.net:
            Y = blk(X)
            X = torch.cat((X, Y), dim=1)  # 连接通道维度上每个块的输入和输出
        return X

blk = DenseBlock(2, 3, 10)  # 会得到 3+2*10=23 通道数的输出
X = torch.randn(4, 3, 8, 8)
Y = blk(X)
Y.shape

torch.Size([4, 23, 8, 8])

7.7.3 过渡层

由于每个稠密块都会带来通道数的增加，由此会导致模型复杂化。可以使用过渡层来控制模型复杂度，它通过 1×1 的卷积层来减小通道数，并使用步幅为2的平均汇聚层加班班高度和宽度，从而降低模型复杂度。

def transition_block(input_channels, num_channels):
    return nn.Sequential(
        nn.BatchNorm2d(input_channels), nn.ReLU(),
        nn.Conv2d(input_channels, num_channels, kernel_size=1),
        nn.AvgPool2d(kernel_size=2, stride=2))

blk = transition_block(23, 10)  # 通道数缩减为10
blk(Y).shape

torch.Size([4, 10, 4, 4])

7.7.4 DenseNet 模型

b1 = nn.Sequential(  # b1 层和前面一样的
    nn.Conv2d(1, 64, kernel_size=7, stride=2, padding=3),
    nn.BatchNorm2d(64), nn.ReLU(),
    nn.MaxPool2d(kernel_size=3, stride=2, padding=1))

num_convs_in_dense_blocks = [4, 4, 4, 4]  # 使用4个稠密块，每个稠密块内使用4个卷积层
num_channels, growth_rate = 64, 32  # 增长率为32则每个稠密块增加4*32=128个通道
blks = []
for i, num_convs in enumerate(num_convs_in_dense_blocks):
    blks.append(DenseBlock(num_convs, num_channels, growth_rate))
    num_channels += num_convs * growth_rate  # 计算上一个稠密块的输出通道数作为下一个块的输入通道数
    if i != len(num_convs_in_dense_blocks) - 1:  # 在稠密块之间添加一个过渡层，使通道数量减半
        blks.append(transition_block(num_channels, num_channels // 2))
        num_channels = num_channels // 2

net = nn.Sequential(
    b1, *blks,
    nn.BatchNorm2d(num_channels), nn.ReLU(),
    nn.AdaptiveAvgPool2d((1, 1)),  # 最终使用全局汇聚层和全连接层输出结果
    nn.Flatten(),
    nn.Linear(num_channels, 10))

7.7.5 训练模型

lr, num_epochs, batch_size = 0.1, 10, 256
train_iter, test_iter = d2l.load_data_fashion_mnist(batch_size, resize=96)
d2l.train_ch6(net, train_iter, test_iter, num_epochs, lr, d2l.try_gpu())  # 大约需要十五分钟，慎跑

loss 0.140, train acc 0.948, test acc 0.914
865.0 examples/sec on cuda:0

image

练习

（1）为什么我们在过渡层使用平均汇聚层而不是最大汇聚层？

我觉得平均汇聚就像考虑所有特征，而最大汇聚就像只考虑最明显的特征。

过渡层如果只考虑最明显特征可能就会有特征损失掉。

不过实测差别似乎不大 。

（2）DenseNet 的优点之一是其模型参数比 ResNet 小。为什么呢？

X = torch.rand(size=(1, 1, 224, 224), device=d2l.try_gpu())
for layer in net:
    X = layer(X)
    print(layer.__class__.__name__,'output shape:\t', X.shape)

Sequential output shape:	 torch.Size([1, 64, 56, 56])
DenseBlock output shape:	 torch.Size([1, 192, 56, 56])
Sequential output shape:	 torch.Size([1, 96, 28, 28])
DenseBlock output shape:	 torch.Size([1, 224, 28, 28])
Sequential output shape:	 torch.Size([1, 112, 14, 14])
DenseBlock output shape:	 torch.Size([1, 240, 14, 14])
Sequential output shape:	 torch.Size([1, 120, 7, 7])
DenseBlock output shape:	 torch.Size([1, 248, 7, 7])
BatchNorm2d output shape:	 torch.Size([1, 248, 7, 7])
ReLU output shape:	 torch.Size([1, 248, 7, 7])
AdaptiveAvgPool2d output shape:	 torch.Size([1, 248, 1, 1])
Flatten output shape:	 torch.Size([1, 248])
Linear output shape:	 torch.Size([1, 10])

可以看到过渡层的存在很好的抑制了输出通道数，同样的卷积层数，FenseNet 的层数始终没有超过256。

（3）DenseNet 一个诟病的问题是内存或显存消耗过多。

a. 真的是这样吗？可以把输入形状换成 $224\times 224$，来看看实际的显存消耗。

b. 还有其他方法来减少显存消耗吗？需要改变框架么？

net2 = nn.Sequential(
    b1, *blks,
    nn.BatchNorm2d(num_channels), nn.ReLU(),
    nn.AdaptiveAvgPool2d((1, 1)),  # 最终使用全局汇聚层和全连接层输出结果
    nn.Flatten(),
    nn.Linear(num_channels, 10))

lr, num_epochs, batch_size = 0.1, 10, 256
train_iter, test_iter = d2l.load_data_fashion_mnist(batch_size, resize=224)
# d2l.train_ch6(net2, train_iter, test_iter, num_epochs, lr, d2l.try_gpu())
# 别跑，一跑显存直接爆炸
# CUDA out of memory. Tried to allocate 294.00 MiB (GPU 0; 4.00 GiB total capacity; 2.48 GiB already allocated; 109.80 MiB free; 2.61 GiB reserved in total by PyTorch) If reserved memory is >> allocated memory try setting max_split_size_mb to avoid fragmentation.  See documentation for Memory Management and PYTORCH_CUDA_ALLOC_CONF

（4）实现 DenseNet 论文表 1 所示的不同 DenseNet 版本。

image

def conv_block_121(input_channels, num_channels):
    return nn.Sequential(
        nn.BatchNorm2d(input_channels), nn.ReLU(),
        nn.Conv2d(input_channels, 4 * input_channels, kernel_size=1),  # 按原作加个BottleNeck
        nn.BatchNorm2d(4 * input_channels), nn.ReLU(),
        nn.Conv2d(4 * input_channels, num_channels, kernel_size=3, padding=1))

class DenseBlock_121(nn.Module):
    def __init__(self, num_convs, input_channels, num_channels):
        super(DenseBlock_121, self).__init__()
        layer = []
        for i in range(num_convs):
            layer.append(conv_block_121(
                num_channels * i + input_channels, num_channels))
        self.net = nn.Sequential(*layer)

    def forward(self, X):
        for blk in self.net:
            Y = blk(X)
            X = torch.cat((X, Y), dim=1)
        return X

b1 = nn.Sequential(
    nn.Conv2d(1, 64, kernel_size=7, stride=2, padding=3),
    nn.BatchNorm2d(64), nn.ReLU(),
    nn.MaxPool2d(kernel_size=3, stride=2, padding=1))

num_convs_in_dense_blocks_121 = [6, 12, 23, 16]
num_channels, growth_rate = 64, 32
blks_121 = []
for i, num_convs in enumerate(num_convs_in_dense_blocks_121):
    blks_121.append(DenseBlock_121(num_convs, num_channels, growth_rate))
    num_channels += num_convs * growth_rate
    if i != len(num_convs_in_dense_blocks_121) - 1:
        blks_121.append(conv_block_121(num_channels, num_channels // 2))
        num_channels = num_channels // 2

net3 = nn.Sequential(
    b1, *blks_121,
    nn.BatchNorm2d(num_channels), nn.ReLU(),
    nn.AdaptiveAvgPool2d((1, 1)),
    nn.Flatten(),
    nn.Linear(num_channels, 10))

lr, num_epochs, batch_size = 0.1, 10, 64
train_iter, test_iter = d2l.load_data_fashion_mnist(batch_size, resize=96)
# d2l.train_ch6(net3, train_iter, test_iter, num_epochs, lr, d2l.try_gpu())
# 跑不了一点，batch_size都调到 64 了，还是爆显存，看看 shape 得了
# CUDA out of memory. Tried to allocate 90.00 MiB (GPU 0; 4.00 GiB total capacity; 2.49 GiB already allocated; 19.80 MiB free; 2.74 GiB reserved in total by PyTorch) If reserved memory is >> allocated memory try setting max_split_size_mb to avoid fragmentation.  See documentation for Memory Management and PYTORCH_CUDA_ALLOC_CONF

X = torch.rand(size=(1, 1, 224, 224))  # 好吧，看个 shape 都得 6.5 秒
for layer in net3:
    X = layer(X)
    print(layer.__class__.__name__,'output shape:\t', X.shape)

Sequential output shape:	 torch.Size([1, 64, 56, 56])
DenseBlock_121 output shape:	 torch.Size([1, 256, 56, 56])
Sequential output shape:	 torch.Size([1, 128, 56, 56])
DenseBlock_121 output shape:	 torch.Size([1, 512, 56, 56])
Sequential output shape:	 torch.Size([1, 256, 56, 56])
DenseBlock_121 output shape:	 torch.Size([1, 992, 56, 56])
Sequential output shape:	 torch.Size([1, 496, 56, 56])
DenseBlock_121 output shape:	 torch.Size([1, 1008, 56, 56])
BatchNorm2d output shape:	 torch.Size([1, 1008, 56, 56])
ReLU output shape:	 torch.Size([1, 1008, 56, 56])
AdaptiveAvgPool2d output shape:	 torch.Size([1, 1008, 1, 1])
Flatten output shape:	 torch.Size([1, 1008])
Linear output shape:	 torch.Size([1, 10])
posted @   AncilunKiang  阅读(86)  评论(0)  编辑  收藏  举报
相关博文：
· 《动手学深度学习 Pytorch版》 7.1 深度卷积神经网络(LeNet)
· 《动手学深度学习 Pytorch版》 6.6 卷积神经网络
· DenseNet实现
· 机器学习——稠密连接网络DenseNet
· DenseNet
阅读排行：
· 全程不用写代码，我用AI程序员写了一个飞机大战
· MongoDB 8.0这个新功能碉堡了，比商业数据库还牛
· DeepSeek 开源周回顾「GitHub 热点速览」
· 记一次.NET内存居高不下排查解决与启示
· 白话解读 Dapr 1.15：你的「微服务管家」又秀新绝活了
点击右上角即可分享
微信分享提示