查看hdfs各目录分别占用多少空间
之前在网上搜索到的全部单位好像都是byte的，看起来很麻烦，然后自己看了下
hadoop fs -help
[hadoop@slave3 java]$ hadoop fs -help Usage: hadoop fs [generic options] [-appendToFile <localsrc> ... <dst>] [-cat [-ignoreCrc] <src> ...] [-checksum <src> ...] [-chgrp [-R] GROUP PATH...] [-chmod [-R] <MODE[,MODE]... | OCTALMODE> PATH...] [-chown [-R] [OWNER][:[GROUP]] PATH...] [-copyFromLocal [-f] [-p] [-l] <localsrc> ... <dst>] [-copyToLocal [-p] [-ignoreCrc] [-crc] <src> ... <localdst>] [-count [-q] [-h] <path> ...] [-cp [-f] [-p | -p[topax]] <src> ... <dst>] [-createSnapshot <snapshotDir> [<snapshotName>]] [-deleteSnapshot <snapshotDir> <snapshotName>] [-df [-h] [<path> ...]] [-du [-s] [-h] <path> ...] [-expunge] [-get [-p] [-ignoreCrc] [-crc] <src> ... <localdst>] [-getfacl [-R] <path>] [-getfattr [-R] {-n name | -d} [-e en] <path>] [-getmerge [-nl] <src> <localdst>] [-help [cmd ...]] [-ls [-d] [-h] [-R] [<path> ...]] [-mkdir [-p] <path> ...] [-moveFromLocal <localsrc> ... <dst>] [-moveToLocal <src> <localdst>] [-mv <src> ... <dst>] [-put [-f] [-p] [-l] <localsrc> ... <dst>] [-renameSnapshot <snapshotDir> <oldName> <newName>] [-rm [-f] [-r|-R] [-skipTrash] <src> ...] [-rmdir [--ignore-fail-on-non-empty] <dir> ...] [-setfacl [-R] [{-b|-k} {-m|-x <acl_spec>} <path>]|[--set <acl_spec> <path>]] [-setfattr {-n name [-v value] | -x name} <path>] [-setrep [-R] [-w] <rep> <path> ...] [-stat [format] <path> ...] [-tail [-f] <file>] [-test -[defsz] <path>] [-text [-ignoreCrc] <src> ...] [-touchz <path> ...] [-usage [cmd ...]] -appendToFile <localsrc> ... <dst> : Appends the contents of all the given local files to the given dst file. The dst file will be created if it does not exist. If <localSrc> is -, then the input is read from stdin. -cat [-ignoreCrc] <src> ... : Fetch all files that match the file pattern <src> and display their content on stdout. -checksum <src> ... : Dump checksum information for files that match the file pattern <src> to stdout. Note that this requires a round-trip to a datanode storing each block of the file, and thus is not efficient to run on a large number of files. The checksum of a file depends on its content, block size and the checksum algorithm and parameters used for creating the file. -chgrp [-R] GROUP PATH... : This is equivalent to -chown ... :GROUP ... -chmod [-R] <MODE[,MODE]... | OCTALMODE> PATH... : Changes permissions of a file. This works similar to the shell's chmod command with a few exceptions. -R modifies the files recursively. This is the only option currently supported. <MODE> Mode is the same as mode used for the shell's command. The only letters recognized are 'rwxXt', e.g. +t,a+r,g-w,+rwx,o=r. <OCTALMODE> Mode specifed in 3 or 4 digits. If 4 digits, the first may be 1 or 0 to turn the sticky bit on or off, respectively. Unlike the shell command, it is not possible to specify only part of the mode, e.g. 754 is same as u=rwx,g=rx,o=r. If none of 'augo' is specified, 'a' is assumed and unlike the shell command, no umask is applied. -chown [-R] [OWNER][:[GROUP]] PATH... : Changes owner and group of a file. This is similar to the shell's chown command with a few exceptions. -R modifies the files recursively. This is the only option currently supported. If only the owner or group is specified, then only the owner or group is modified. The owner and group names may only consist of digits, alphabet, and any of [-_./@a-zA-Z0-9]. The names are case sensitive. WARNING: Avoid using '.' to separate user name and group though Linux allows it. If user names have dots in them and you are using local file system, you might see surprising results since the shell command 'chown' is used for local files. -copyFromLocal [-f] [-p] [-l] <localsrc> ... <dst> : Identical to the -put command. -copyToLocal [-p] [-ignoreCrc] [-crc] <src> ... <localdst> : Identical to the -get command. -count [-q] [-h] <path> ... : Count the number of directories, files and bytes under the paths that match the specified file pattern. The output columns are: DIR_COUNT FILE_COUNT CONTENT_SIZE FILE_NAME or QUOTA REMAINING_QUOTA SPACE_QUOTA REMAINING_SPACE_QUOTA DIR_COUNT FILE_COUNT CONTENT_SIZE FILE_NAME The -h option shows file sizes in human readable format. -cp [-f] [-p | -p[topax]] <src> ... <dst> : Copy files that match the file pattern <src> to a destination. When copying multiple files, the destination must be a directory. Passing -p preserves status [topax] (timestamps, ownership, permission, ACLs, XAttr). If -p is specified with no <arg>, then preserves timestamps, ownership, permission. If -pa is specified, then preserves permission also because ACL is a super-set of permission. Passing -f overwrites the destination if it already exists. raw namespace extended attributes are preserved if (1) they are supported (HDFS only) and, (2) all of the source and target pathnames are in the /.reserved/raw hierarchy. raw namespace xattr preservation is determined solely by the presence (or absence) of the /.reserved/raw prefix and not by the -p option. -createSnapshot <snapshotDir> [<snapshotName>] : Create a snapshot on a directory -deleteSnapshot <snapshotDir> <snapshotName> : Delete a snapshot from a directory -df [-h] [<path> ...] : Shows the capacity, free and used space of the filesystem. If the filesystem has multiple partitions, and no path to a particular partition is specified, then the status of the root partitions will be shown. -h Formats the sizes of files in a human-readable fashion rather than a number of bytes. -du [-s] [-h] <path> ... : Show the amount of space, in bytes, used by the files that match the specified file pattern. The following flags are optional: -s Rather than showing the size of each individual file that matches the pattern, shows the total (summary) size. -h Formats the sizes of files in a human-readable fashion rather than a number of bytes. Note that, even without the -s option, this only shows size summaries one level deep into a directory. The output is in the form size disk space consumed name(full path) -expunge : Empty the Trash -get [-p] [-ignoreCrc] [-crc] <src> ... <localdst> : Copy files that match the file pattern <src> to the local name. <src> is kept. When copying multiple files, the destination must be a directory. Passing -p preserves access and modification times, ownership and the mode. -getfacl [-R] <path> : Displays the Access Control Lists (ACLs) of files and directories. If a directory has a default ACL, then getfacl also displays the default ACL. -R List the ACLs of all files and directories recursively. <path> File or directory to list. -getfattr [-R] {-n name | -d} [-e en] <path> : Displays the extended attribute names and values (if any) for a file or directory. -R Recursively list the attributes for all files and directories. -n name Dump the named extended attribute value. -d Dump all extended attribute values associated with pathname. -e <encoding> Encode values after retrieving them.Valid encodings are "text", "hex", and "base64". Values encoded as text strings are enclosed in double quotes ("), and values encoded as hexadecimal and base64 are prefixed with 0x and 0s, respectively. <path> The file or directory. -getmerge [-nl] <src> <localdst> : Get all the files in the directories that match the source file pattern and merge and sort them to only one file on local fs. <src> is kept. -nl Add a newline character at the end of each file. -help [cmd ...] : Displays help for given command or all commands if none is specified. -ls [-d] [-h] [-R] [<path> ...] : List the contents that match the specified file pattern. If path is not specified, the contents of /user/<currentUser> will be listed. Directory entries are of the form: permissions - userId groupId sizeOfDirectory(in bytes) modificationDate(yyyy-MM-dd HH:mm) directoryName and file entries are of the form: permissions numberOfReplicas userId groupId sizeOfFile(in bytes) modificationDate(yyyy-MM-dd HH:mm) fileName -d Directories are listed as plain files. -h Formats the sizes of files in a human-readable fashion rather than a number of bytes. -R Recursively list the contents of directories. -mkdir [-p] <path> ... : Create a directory in specified location. -p Do not fail if the directory already exists -moveFromLocal <localsrc> ... <dst> : Same as -put, except that the source is deleted after it's copied. -moveToLocal <src> <localdst> : Not implemented yet -mv <src> ... <dst> : Move files that match the specified file pattern <src> to a destination <dst>. When moving multiple files, the destination must be a directory. -put [-f] [-p] [-l] <localsrc> ... <dst> : Copy files from the local file system into fs. Copying fails if the file already exists, unless the -f flag is given. Flags: -p Preserves access and modification times, ownership and the mode. -f Overwrites the destination if it already exists. -l Allow DataNode to lazily persist the file to disk. Forces replication factor of 1. This flag will result in reduced durability. Use with care. -renameSnapshot <snapshotDir> <oldName> <newName> : Rename a snapshot from oldName to newName -rm [-f] [-r|-R] [-skipTrash] <src> ... : Delete all files that match the specified file pattern. Equivalent to the Unix command "rm <src>" -skipTrash option bypasses trash, if enabled, and immediately deletes <src> -f If the file does not exist, do not display a diagnostic message or modify the exit status to reflect an error. -[rR] Recursively deletes directories -rmdir [--ignore-fail-on-non-empty] <dir> ... : Removes the directory entry specified by each directory argument, provided it is empty. -setfacl [-R] [{-b|-k} {-m|-x <acl_spec>} <path>]|[--set <acl_spec> <path>] : Sets Access Control Lists (ACLs) of files and directories. Options: -b Remove all but the base ACL entries. The entries for user, group and others are retained for compatibility with permission bits. -k Remove the default ACL. -R Apply operations to all files and directories recursively. -m Modify ACL. New entries are added to the ACL, and existing entries are retained. -x Remove specified ACL entries. Other ACL entries are retained. --set Fully replace the ACL, discarding all existing entries. The <acl_spec> must include entries for user, group, and others for compatibility with permission bits. <acl_spec> Comma separated list of ACL entries. <path> File or directory to modify. -setfattr {-n name [-v value] | -x name} <path> : Sets an extended attribute name and value for a file or directory. -n name The extended attribute name. -v value The extended attribute value. There are three different encoding methods for the value. If the argument is enclosed in double quotes, then the value is the string inside the quotes. If the argument is prefixed with 0x or 0X, then it is taken as a hexadecimal number. If the argument begins with 0s or 0S, then it is taken as a base64 encoding. -x name Remove the extended attribute. <path> The file or directory. -setrep [-R] [-w] <rep> <path> ... : Set the replication level of a file. If <path> is a directory then the command recursively changes the replication factor of all files under the directory tree rooted at <path>. -w It requests that the command waits for the replication to complete. This can potentially take a very long time. -R It is accepted for backwards compatibility. It has no effect. -stat [format] <path> ... : Print statistics about the file/directory at <path> in the specified format. Format accepts filesize in blocks (%b), group name of owner(%g), filename (%n), block size (%o), replication (%r), user name of owner(%u), modification date (%y, %Y) -tail [-f] <file> : Show the last 1KB of the file. -f Shows appended data as the file grows. -test -[defsz] <path> : Answer various questions about <path>, with result via exit status. -d return 0 if <path> is a directory. -e return 0 if <path> exists. -f return 0 if <path> is a file. -s return 0 if file <path> is greater than zero bytes in size. -z return 0 if file <path> is zero bytes in size, else return 1. -text [-ignoreCrc] <src> ... : Takes a source file and outputs the file in text format. The allowed formats are zip and TextRecordInputStream and Avro. -touchz <path> ... : Creates a file of zero length at <path> with current time as the timestamp of that <path>. An error is returned if the file exists with non-zero length -usage [cmd ...] : Displays the usage for given command or all commands if none is specified. Generic options supported are -conf <configuration file> specify an application configuration file -D <property=value> use value for given property -fs <local|namenode:port> specify a namenode -jt <local|resourcemanager:port> specify a ResourceManager -files <comma separated list of files> specify comma separated files to be copied to the map reduce cluster -libjars <comma separated list of jars> specify comma separated jar files to include in the classpath. -archives <comma separated list of archives> specify comma separated archives to be unarchived on the compute machines. The general command line syntax is bin/hadoop command [genericOptions] [commandOptions]
hadoop fs -du -h /
[hadoop@slave3 java]$ hadoop fs -du -h / 664.7 M 1.3 G /community 13.3 G 26.6 G /data1 12.2 G 25.3 G /hbase 66.5 G 133.0 G /hive 112.5 G 225.0 G /info 851.9 K 1.7 M /jar 3.1 G 6.2 G /rank 221.9 M 443.8 M /sh 1.8 G 8.8 G /tmp 6.8 G 13.5 G /tuitui99 407.7 G 815.4 G /tuitui_logs 38.4 M 76.7 M /usr 9.7 G 29.0 G /yl
hadoop fs -du -h /tmp
[hadoop@slave3 java]$ hadoop fs -du -h /tmp 813.4 M 6.9 G /tmp/hadoop-yarn 988.9 M 1.9 G /tmp/hive 0 0 /tmp/ll [hadoop@slave3 java]$ hadoop fs -du -h /tuitui_logs 407.7 G 815.4 G /tuitui_logs/logs [hadoop@slave3 java]$ hadoop fs -du -h /tuitui_logs/logs 141.4 G 282.8 G /tuitui_logs/logs/155 14.8 G 29.5 G /tuitui_logs/logs/156 2.7 G 5.5 G /tuitui_logs/logs/bj 7.6 G 15.1 G /tuitui_logs/logs/cd 4.8 G 9.7 G /tuitui_logs/logs/dl 48.8 G 97.7 G /tuitui_logs/logs/gz 2.5 G 5.0 G /tuitui_logs/logs/jn 137.9 G 275.9 G /tuitui_logs/logs/sh 44.4 G 88.9 G /tuitui_logs/logs/sz 2.1 G 4.2 G /tuitui_logs/logs/tj 639.5 M 1.2 G /tuitui_logs/logs/wh [hadoop@slave3 java]$
很简单明了，前面的数字即为目录所占空间的大小，后面的因为我前期 备份数为3 后期改为2 所以可能会不一样
转载注明出处
如果本文对你有帮助，请帮忙啦~~
打开支付宝首页搜“522901509”领红包，领到大红包的小伙伴赶紧使用哦！
