SNF开发平台WinForm之十五-时间轴控件使用-SNF快速开发平台3.3-Spring.Net.Framework

一、显示效果如下：

二、在控件库里选择UCTimeAxis 拖拽到窗体里。

三、加入以下代码，在load事件里进行调用就可以运行了。

        #region 给时间轴控件加载数据
        private void UCTimeAxisData() 
        {
            //增加节点
            List<KeyValuePair<string, string>> list = new List<KeyValuePair<string, string>>();
            list.Add(new KeyValuePair<string, string>("1", "读取配置"));
            list.Add(new KeyValuePair<string, string>("2", "选择模板"));
            list.Add(new KeyValuePair<string, string>("3", "确认数据"));
            list.Add(new KeyValuePair<string, string>("4", "生成代码"));
            list.Add(new KeyValuePair<string, string>("5", "生成代码"));
            list.Add(new KeyValuePair<string, string>("6", "生成代码"));
            list.Add(new KeyValuePair<string, string>("7", "生成代码"));
            list.Add(new KeyValuePair<string, string>("8", "生成代码"));
            list.Add(new KeyValuePair<string, string>("9", "生成代码"));
            list.Add(new KeyValuePair<string, string>("10", "生成代码"));
            list.Add(new KeyValuePair<string, string>("11", "生成代码"));
            list.Add(new KeyValuePair<string, string>("12", "生成代码"));

            list.Add(new KeyValuePair<string, string>("11", "读取配置"));
            list.Add(new KeyValuePair<string, string>("12", "选择模板"));
            list.Add(new KeyValuePair<string, string>("13", "确认数据"));
            list.Add(new KeyValuePair<string, string>("14", "生成代码"));
            list.Add(new KeyValuePair<string, string>("15", "生成代码"));
            list.Add(new KeyValuePair<string, string>("16", "生成代码"));
            list.Add(new KeyValuePair<string, string>("17", "生成代码"));
            list.Add(new KeyValuePair<string, string>("18", "生成代码"));
            list.Add(new KeyValuePair<string, string>("19", "生成代码"));
            list.Add(new KeyValuePair<string, string>("110", "生成代码"));
            list.Add(new KeyValuePair<string, string>("111", "生成代码"));
            list.Add(new KeyValuePair<string, string>("112", "生成代码"));

            list.Add(new KeyValuePair<string, string>("111", "读取配置"));
            list.Add(new KeyValuePair<string, string>("112", "选择模板"));
            list.Add(new KeyValuePair<string, string>("113", "确认数据"));
            list.Add(new KeyValuePair<string, string>("114", "生成代码"));
            list.Add(new KeyValuePair<string, string>("115", "生成代码"));
            list.Add(new KeyValuePair<string, string>("116", "生成代码"));
            list.Add(new KeyValuePair<string, string>("117", "生成代码"));
            list.Add(new KeyValuePair<string, string>("118", "生成代码"));
            list.Add(new KeyValuePair<string, string>("119", "生成代码"));
            list.Add(new KeyValuePair<string, string>("1110", "生成代码"));
            list.Add(new KeyValuePair<string, string>("1111", "生成代码"));
            list.Add(new KeyValuePair<string, string>("1112", "生成代码"));

            UCTimeAxis ucTimeAxis = new UCTimeAxis(list, 0);//0为横向显示，1纵向显示
            //设置，已经完成状态值
            ucTimeAxis.SetStepValues.Add("1");
            ucTimeAxis.SetStepValues.Add("2");
            ucTimeAxis.SetStepValues.Add("3");

            ////是否需要点击 label标签事件，如果需要用下面代码进行绑定
            //ucTimeAxis.lc2 = new UCTimeAxis.TimeAxisClick2(AxisItemClick);

            scrollTimeAxis.Controls.Clear();
            scrollTimeAxis.Controls.Add(ucTimeAxis);
            //处理是否出现滚动条
            this.scrollTimeAxis.AutoScrollMinSize = new Size(list.Count * 80, 10);
            //填充整个控件
            ucTimeAxis.Dock = DockStyle.Fill;
        }

        //是否需要点击 label标签事件，如果需要用下面代码进行绑定
        public void AxisItemClick(string labelName, string labelText)
        {
            MessageBox.Show(labelName + labelText);
        }

        #endregion