k8s部署

环境初始化，所有节点

　　1.配置hostname

hostnamectl set-hostname master
hostnamectl set-hostname node

　　

　　2.配置/etc/hosts

127.0.0.1        localhost localhost.localdomain
localhost4 localhost4.localdomain4
::1              localhost localhost.localdomain
localhost6 localhost6.localdomain6    


192.168.1.11     master
192.168.1.12     node

 

　　3.关闭防火墙、Selinux、swap

# 停防火墙
systemctl stop  firewalld
systemctl disable firewalld


关闭Selinux
setenforce 0
sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/sysconfig/selinux
sed -i "s/^SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config
sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/sysconfig/selinux
sed -i "s/^SELINUX=permissive/SELINUX=disabled/g" /etc/selinux/config


# 关闭Swap
swapoff -a
sed -i 's/.*swap.*/#&/' /etc/fstab

# 加载br_netfilter
modprobe br_netfilter

 

　　4.配置内核参数  /etc/sysctl.d/k8s.conf 

net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
# 生效文件
sysctl -p /etc/sysctl.d/k8s.conf 

　　

　　5.修改Linux 资源配置文件,调高ulimit最大打开数和systemctl管理的服务文件最大打开数 \

echo "* soft nofile 655360" >> /etc/security/limits.conf
echo "* hard nofile 655360" >> /etc/security/limits.conf
echo "* soft nproc 655360" >> /etc/security/limits.conf
echo "* hard nproc 655360" >> /etc/security/limits.conf
echo "* soft memlock unlimited" >> /etc/security/limits.conf
echo "* hard memlock unlimited" >> /etc/security/limits.conf
echo "DefaultLimitNOFILE=1024000" >> /etc/systemd/system.conf
echo "DefaultLimitNPROC=1024000" >> /etc/systemd/system.conf

 

　　6.配置国内tencent yum源、epel源、Kubernetes源地址

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.cloud.tencent.com/repo/centos7_base.repo


wget -O /etc/yum.repos.d/epel.repo http://mirrors.cloud.tencent.com/repo/epel-7.repo


yum clean all && yum makecache

#配置国内Kubernetes源地址
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

 　　

　　8.安装依赖包

yum install -y conntrack ipvsadm ipset jq sysstat curl iptables libseccomp bash-completion
yum-utils device-mapper-persistent-data lvm2 net-tools conntrack-tools vim libtool-ltdl

 

　　9.配置时间同步，所有节点都需要

yum install chrony –y
systemctl enable chronyd.service && systemctl start chronyd.service 
systemctl status chronyd.service
chronyc sources

 

　　10.初始化环境配置检查

　　　　- 重启,做完以上所有操作,最好reboot重启一遍

　　　　- ping 每个节点hostname 看是否能ping通
　　　　- ssh 对方hostname看互信是否无密码访问成功
　　　　- 执行date命令查看每个节点时间是否正确
　　　　- 执行 ulimit -Hn 看下最大文件打开数是否是655360
　　　　- cat /etc/sysconfig/selinux |grep disabled 查看下每个节点selinux是否都是disabled状态

 

安装docker ,所有节点都需要装

　　1.设置docker yum源

yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

　　2.安装docker

# 列出docker 版本信息
yum list docker-ce --showduplicates | sort -r

#  安装docker 指定18.06.1
yum install -y docker-ce-18.06.1.ce-3.el7
systemctl restart docker
# 配置镜像加速器和docker数据存放路径
tee /etc/docker/daemon.json <<-'EOF'
{
"registry-mirrors": ["https://q2hy3fzi.mirror.aliyuncs.com"],
"graph": "/tol/docker-data"
}
EOF

　　

　　3.启动docker 

systemctl daemon-reload 
systemctl restart docker
systemctl enable docker
systemctl status docker

# docker --version

 

 

　　安装kubeadm、kubelet、kubectl，所有节点

　　• kubeadm: 部署集群用的命令
　　• kubelet: 在集群中每台机器上都要运行的组件,负责管理pod、容器的生命周期
　　• kubectl: 集群管理工具

　　安装工具

yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes
systemctl enable kubelet && systemctl start kubelet

 

镜像下载准备

　　1.初始化获取要下载的镜像列表

# 查看依赖需要安装的镜像列表
kubeadm config images list


# 生成默认kubeadm.conf文件
kubeadm config print init-defaults > kubeadm.conf

　　

　　2.绕过墙下载镜像的方法

sed -i "s/imageRepository: .*/imageRepository: registry.aliyuncs.com\/google_containers/g" kubeadm.conf

　　

　　3.指定kubeadm安装的Kubernetes版本

sed -i "s/kubernetesVersion: .*/kubernetesVersion: v1.13.0/g" kubeadm.conf

　　

　　4.下载需要的镜像

kubeadm config images pull --config kubeadm.conf

docker images

　　

　　5.docker tag 镜像

docker tag registry.aliyuncs.com/google_containers/kube-apiserver:v1.13.0 k8s.gcr.io/kube-apiserver:v1.13.0
docker tag registry.aliyuncs.com/google_containers/kube-controller-manager:v1.13.0 k8s.gcr.io/kube-controller-manager:v1.13.0
docker tag registry.aliyuncs.com/google_containers/kube-scheduler:v1.13.0 k8s.gcr.io/kube-scheduler:v1.13.0
docker tag registry.aliyuncs.com/google_containers/kube-proxy:v1.13.0 k8s.gcr.io/kube-proxy:v1.13.0
docker tag registry.aliyuncs.com/google_containers/pause:3.1 k8s.gcr.io/pause:3.1
docker tag registry.aliyuncs.com/google_containers/etcd:3.2.24 k8s.gcr.io/etcd:3.2.24
docker tag registry.aliyuncs.com/google_containers/coredns:1.2.6 k8s.gcr.io/coredns:1.2.6

　　

　　6.docker rmi 清理下载的镜像

docker rmi registry.aliyuncs.com/google_containers/kube-apiserver:v1.13.0
docker rmi registry.aliyuncs.com/google_containers/kube-controller-manager:v1.13.0
docker rmi registry.aliyuncs.com/google_containers/kube-scheduler:v1.13.0
docker rmi registry.aliyuncs.com/google_containers/kube-proxy:v1.13.0
docker rmi registry.aliyuncs.com/google_containers/pause:3.1
docker rmi registry.aliyuncs.com/google_containers/etcd:3.2.24
docker rmi registry.aliyuncs.com/google_containers/coredns:1.2.6

 

部署master节点

　　1.kubeadm init 初始化master节点

# 定义POD的网段为: 172.22.0.0/16 ,api server地址就是master本机IP地址
kubeadm init --kubernetes-version=v1.13.0 --pod-network-cidr=172.22.0.0/16 --apiserver-advertise-address=192.168.1.11
ls /etc/kubernetes/

# 如果需要可以 执行下面的命令重新初始化
kubeadm reset
kubeadm init --kubernetes-version=v1.13.0 --pod-network-cidr=172.22.0.0/16 --apiserver-advertise-address=192.168.1.11
#  记录下面的信息
kubeadm join 192.168.1.11:6443 --token iazwtj.v3ajyq9kyqftg3et --discovery-token-ca-cert-hash sha256:27aaefd2afc4e75fd34c31365abd3a7357bb4bba7552056bb4a9695fcde14ef5

　　　　

　　2.验证测试

# 配置kubectl命令
mkdir -p /root/.kube
cp /etc/kubernetes/admin.conf /root/.kube/config

# 执行获取pods列表命令,查看相关状态
kubectl get pods --all-namespaces

# 查看集群的健康状态
kubectl get cs

 

部署calico网络

　　1.下载calico 官方镜像

docker pull calico/node:v3.1.4
docker pull calico/cni:v3.1.4
docker pull calico/typha:v3.1.4

　　2.tag 这三个calico镜像

docker tag calico/node:v3.1.4 quay.io/calico/node:v3.1.4
docker tag calico/cni:v3.1.4 quay.io/calico/cni:v3.1.4
docker tag calico/typha:v3.1.4 quay.io/calico/typha:v3.1.4

　　3.删除原有镜像

docker rmi calico/node:v3.1.4
docker rmi calico/cni:v3.1.4
docker rmi calico/typha:v3.1.4

　　4.部署calico

curl https://docs.projectcalico.org/v3.1/getting-started/kubernetes/installation/hosted/rbac-kdd.yaml -O

kubectl apply -f rbac-kdd.yaml


curl https://docs.projectcalico.org/v3.1/getting-started/kubernetes/installation/hosted/kubernetes-datastore/policy-only/1.7/calico.yaml -O


#把ConfigMap 下的 typha_service_name 值由none变成 calico-typha
sed -i 's/typha_service_name: "none"/typha_service_name: "calico-typha"/g' calico.yaml
 

#设置 Deployment 类目的 spec 下的replicas值为1

sed -i 's/replicas: 0/replicas: 1/g' calico.yaml

#找到CALICO_IPV4POOL_CIDR,然后值修改成之前定义好的POD网段,我这里是172.22.0.0/16

 sed -i 's/192.168.0.0/172.22.0.0/g' calico.yaml

 
#把 CALICO_NETWORKING_BACKEND 值设置为 bird ,这个值是设置BGP网络后端模式
sed -i '/name: CALICO_NETWORKING_BACKEND/{n;s/value: "none"/value: "bird"/;}' calico.yaml






　　5.部署calico.yaml




kubectl apply -f calico.yaml
wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
kubectl apply -f kube-flannel.yml　　


kubectl get pods --all-namespaces




 


部署node节点


　　1.下载镜像


　　




docker pull registry.aliyuncs.com/google_containers/kube-proxy:v1.13.0
docker pull registry.aliyuncs.com/google_containers/pause:3.1
docker pull calico/node:v3.1.4
docker pull calico/cni:v3.1.4
docker pull calico/typha:v3.1.4
docker tag registry.aliyuncs.com/google_containers/kube-proxy:v1.13.0 k8s.gcr.io/kube-proxy:v1.13.0
docker tag registry.aliyuncs.com/google_containers/pause:3.1 k8s.gcr.io/pause:3.1
docker tag calico/node:v3.1.4 quay.io/calico/node:v3.1.4
docker tag calico/cni:v3.1.4 quay.io/calico/cni:v3.1.4
docker tag calico/typha:v3.1.4 quay.io/calico/typha:v3.1.4
docker rmi registry.aliyuncs.com/google_containers/kube-proxy:v1.13.0
docker rmi registry.aliyuncs.com/google_containers/pause:3.1
docker rmi calico/node:v3.1.4
docker rmi calico/cni:v3.1.4
docker rmi calico/typha:v3.1.4




　　2.把node加入到集群




kubeadm join 192.168.1.11:6443 --token iazwtj.v3ajyq9kyqftg3et --discovery-token-ca-cert-hash sha256:27aaefd2afc4e75fd34c31365abd3a7357bb4bba7552056bb4a9695fcde14ef5




　　3.在master上查看




kubectl get nodes




 


部署dashboard


　　　1. 生成私钥和证书签名请求　




mkdir -p /etc/kubernetes/certs
cd /etc/kubernetes/certs
openssl genrsa -des3 -passout pass:x -out dashboard.pass.key 2048
openssl rsa -passin pass:x -in dashboard.pass.key -out dashboard.key
# 删除刚才生成的dashboard.pass.key
rm -rf dashboard.pass.key

openssl req -new -key dashboard.key -out dashboard.csr

# 生成SSL证书
openssl x509 -req -sha256 -days 365 -in dashboard.csr -signkey dashboard.key -out dashboard.crt




　　


　　2.创建secret




kubectl create secret generic kubernetes-dashboard-certs --from-file=/etc/kubernetes/certs -n kube-system




　　


　　3.下载dashboard镜像、tag镜像(在全部节点上)




docker pull registry.cn-hangzhou.aliyuncs.com/kubernete/kubernetes-dashboard-amd64:v1.10.0

docker tag registry.cn-hangzhou.aliyuncs.com/kubernete/kubernetes-dashboard-amd64:v1.10.0 k8s.gcr.io/kubernetes-dashboard:v1.10.0

docker rmi registry.cn-hangzhou.aliyuncs.com/kubernete/kubernetes-dashboard-amd64:v1.10.0




　　


　　4.下载 kubernetes-dashboard.yaml 部署文件(在master上执行)　






  1 ---
  2 apiVersion: v1
  3 kind: ServiceAccount
  4 metadata:
  5   labels:
  6     k8s-app: kubernetes-dashboard
  7   name: kubernetes-dashboard
  8   namespace: kube-system
  9 ---
 10 kind: Role
 11 apiVersion: rbac.authorization.k8s.io/v1
 12 metadata:
 13   name: kubernetes-dashboard-minimal
 14   namespace: kube-system
 15 rules:
 16 - apiGroups: [""]
 17   resources: ["secrets"]
 18   verbs: ["create"]
 19 - apiGroups: [""]
 20   resources: ["configmaps"]
 21   verbs: ["create"]
 22 - apiGroups: [""]
 23   resources: ["secrets"]
 24   resourceNames: ["kubernetes-dashboard-key-holder", "kubernetes-dashboard-certs"]
 25   verbs: ["get", "update", "delete"]
 26 - apiGroups: [""]
 27   resources: ["configmaps"]
 28   resourceNames: ["kubernetes-dashboard-settings"]
 29   verbs: ["get", "update"]
 30 - apiGroups: [""]
 31   resources: ["services"]
 32   resourceNames: ["heapster"]
 33   verbs: ["proxy"]
 34 - apiGroups: [""]
 35   resources: ["services/proxy"]
 36   resourceNames: ["heapster", "http:heapster:", "https:heapster:"]
 37   verbs: ["get"]
 38 ---
 39 apiVersion: rbac.authorization.k8s.io/v1
 40 kind: RoleBinding
 41 metadata:
 42   name: kubernetes-dashboard-minimal
 43   namespace: kube-system
 44 roleRef:
 45   apiGroup: rbac.authorization.k8s.io
 46   kind: Role
 47   name: kubernetes-dashboard-minimal
 48 subjects:
 49 - kind: ServiceAccount
 50   name: kubernetes-dashboard
 51   namespace: kube-system
 52 ---
 53 kind: Deployment
 54 apiVersion: apps/v1beta2
 55 metadata:
 56   labels:
 57     k8s-app: kubernetes-dashboard
 58   name: kubernetes-dashboard
 59   namespace: kube-system
 60 spec:
 61   replicas: 1
 62   revisionHistoryLimit: 10
 63   selector:
 64     matchLabels:
 65       k8s-app: kubernetes-dashboard
 66   template:
 67     metadata:
 68       labels:
 69         k8s-app: kubernetes-dashboard
 70     spec:
 71       containers:
 72       - name: kubernetes-dashboard
 73         image: k8s.gcr.io/kubernetes-dashboard:v1.10.0
 74         ports:
 75         - containerPort: 8443
 76           protocol: TCP
 77         args:
 78           - --auto-generate-certificates
 79         volumeMounts:
 80         - name: kubernetes-dashboard-certs
 81           mountPath: /certs
 82         - mountPath: /tmp
 83           name: tmp-volume
 84         livenessProbe:
 85           httpGet:
 86             scheme: HTTPS
 87             path: /
 88             port: 8443
 89           initialDelaySeconds: 30
 90           timeoutSeconds: 30
 91       volumes:
 92       - name: kubernetes-dashboard-certs
 93         secret:
 94           secretName: kubernetes-dashboard-certs
 95       - name: tmp-volume
 96         emptyDir: {}
 97       serviceAccountName: kubernetes-dashboard
 98       tolerations:
 99       - key: node-role.kubernetes.io/master
100         effect: NoSchedule
101 ---
102 kind: Service
103 apiVersion: v1
104 metadata:
105   labels:
106     k8s-app: kubernetes-dashboard
107   name: kubernetes-dashboard
108   namespace: kube-system
109 spec:
110   ports:
111     - port: 443
112       targetPort: 8443
113       nodePort: 30005
114   type : NodePort
115   selector:
116     k8s-app: kubernetes-dashboard



View Code


 


　　5 创建dashboard的pod




kubectl create -f kubernetes-dashboard.yaml




 


　　6.查看服务器运行状态




kubectl get deployment kubernetes-dashboard -n kube-system
kubectl --namespace kube-system get pods -o wide
kubectl get services kubernetes-dashboard -n kube-system
netstat -ntlp|grep 30005




　　


　　7. Dashboard BUG处理


　　kubectl create -f kube-dashboard-access.yaml




---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: kubernetes-dashboard-minimal
  namespace: kube-system
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cluster-admin
subjects:
- kind: ServiceAccount
  name: kubernetes-dashboard
  namespace: kube-system

---




 


　　






            

            
posted @ 
2019-02-23 15:56 
Ray_chen 
阅读(1708) 
评论(0) 
编辑 
收藏 
举报