An example on how to get proper help following the guideline shown.
I will try to give an example taken purely from my own imagination that
show the kind of info I would like in order to help people.
=== 0 ===
Prepare for getting help. cfd-online does not provide large filesize uploads so registering a dropbox/box account and use a public link to the picture/file makes it a lot easier to share files/pics or the full case.
1 ////////cfdoline并不提供大型文件的上传,故而建议上传到其他网站,使用公共链接来分享代码
=== 1 ===
First give it a relevant name in the title of the thread
simpleFoam pipe case diverges
What this little information tells us is that the solver is simpleFoam,
the geometry is a pipe and we know that the problem is that it diverges.
///////////首先你得给你的串一个名字。 /////////// 比如说simpleFoam管道流中的发散 ///////////这个题目提供了信息有:simpleFoam求解器、管道形状、PDE的发散
=== 2 ===
Second give a sketch of the geometry, a screendump of the mesh and maybe
even a cut through the mesh. Paraview and the Clip filter works good
here.
This helps immensely when trying to visualise the case in others brains.
The "a picture says more than a thousand words" quote springs to mind here
Below is an example of a picture inserted using a public link from dropbox.
Also the first info you need to give is the output from checkMesh put into a log file
checkMesh > checkMesh.log
Ok now people know that you have a pipe with two bends and that the mesh is fully structured (paraview shows some as tets, but that is a render issue). The dimensions of the pipe is also known now. Also from the header files people know that you are using OpenFOAM version 2.1.x, this is relevant since there can be some bugs in the version used.
=== 3 ===
Ok now we are ready to start identifying the problem.
You know that you have divergence problems and if you have opened just
one book about CFD, you know that stability is related to a number of
things.
- Mesh -> We get good output from checkMesh so thats ok
- Solver -> This we get from the fvSolution file so upload/link that
- Schemes -> From the fvSchemes file so upload/link that
This will allow people to see if you have the correct setup for the type of case/mesh you have.
=== 4 ===
Also some good information to give is the output from the terminal, but
please don't post 10+ iterations. Post only the relevant bits, for
example the 2-3 iterations where the solver start to diverge. Another
options would be to give the log file as a upload/link. The output can
be put into a file using.
simpleFoam > simpleFoam.log 2>&1
Below is an example of two iterations, they don't diverge but you get the drift.
Time = 11 smoothSolver: Solving for Ux, Initial residual = 0.0394701, Final residual = 0.00283316, No Iterations 4 smoothSolver: Solving for Uy, Initial residual = 0.0244406, Final residual = 0.00163773, No Iterations 4 smoothSolver: Solving for Uz, Initial residual = 0.211626, Final residual = 0.0144428, No Iterations 4 GAMG: Solving for p, Initial residual = 0.332445, Final residual = 0.0124884, No Iterations 7 time step continuity errors : sum local = 0.0803619, global = 0.0111056, cumulative = 0.0907056 smoothSolver: Solving for epsilon, Initial residual = 0.0137779, Final residual = 0.000915039, No Iterations 3 smoothSolver: Solving for k, Initial residual = 0.0205267, Final residual = 0.00103642, No Iterations 4 ExecutionTime = 6.07 s ClockTime = 6 s Time = 12 smoothSolver: Solving for Ux, Initial residual = 0.0966665, Final residual = 0.00756253, No Iterations 4 smoothSolver: Solving for Uy, Initial residual = 0.103096, Final residual = 0.00828772, No Iterations 4 smoothSolver: Solving for Uz, Initial residual = 0.122408, Final residual = 0.00767765, No Iterations 4 GAMG: Solving for p, Initial residual = 0.181939, Final residual = 0.00707472, No Iterations 5 time step continuity errors : sum local = 0.0780837, global = -0.0134194, cumulative = 0.0772862 smoothSolver: Solving for epsilon, Initial residual = 0.0127022, Final residual = 0.000977349, No Iterations 3 smoothSolver: Solving for k, Initial residual = 0.0222577, Final residual = 0.00121352, No Iterations 4 ExecutionTime = 6.46 s ClockTime = 7 s
=== 5 ===
This might seem like a lot of work, but if you want people to invest
time on you, you must invest at least as much time in asking the right
question and give sufficient input to allow people to help you.
I'm sure that if you follow this simple guide you will get the help you need.