Linux 技巧:让进程在后台可靠运行的几种方法(转)。
如果只是临时有一个命令需要长时间运行,什么方法能最简便的保证它在后台稳定运行呢?
我们知道,当用户注销(logout)或者网络断开时,终端会收到 HUP(hangup)信号从而关闭其所有子进程。因此,我们的解决办法就有两种途径:要么让进程忽略 HUP 信号,要么让进程运行在新的会话里从而成为不属于此终端的子进程。
1. nohup
nohup 无疑是我们首先想到的办法。顾名思义,nohup 的用途就是让提交的命令忽略 hangup 信号。让我们先来看一下 nohup 的帮助信息:
NOHUP(1) User Commands NOHUP(1) NAME nohup - run a command immune to hangups, with output to a non-tty SYNOPSIS nohup COMMAND [ARG]... nohup OPTION DESCRIPTION Run COMMAND, ignoring hangup signals. --help display this help and exit --version output version information and exit |
可见,nohup 的使用是十分方便的,只需在要处理的命令前加上 nohup 即可,标准输出和标准错误缺省会被重定向到 nohup.out 文件中。一般我们可在结尾加上"&"来将命令同时放入后台运行,也可用">filename 2>&1"
来更改缺省的重定向文件名。
[root@pvcent107 ~]# nohup ping www.ibm.com & [1] 3059 nohup: appending output to `nohup.out' [root@pvcent107 ~]# ps -ef |grep 3059 root 3059 984 0 21:06 pts/3 00:00:00 ping www.ibm.com root 3067 984 0 21:06 pts/3 00:00:00 grep 3059 [root@pvcent107 ~]# |
2。setsid
nohup 无疑能通过忽略 HUP 信号来使我们的进程避免中途被中断,但如果我们换个角度思考,如果我们的进程不属于接受 HUP 信号的终端的子进程,那么自然也就不会受到 HUP 信号的影响了。setsid 就能帮助我们做到这一点。让我们先来看一下 setsid 的帮助信息:
SETSID(8) Linux Programmer’s Manual SETSID(8) NAME setsid - run a program in a new session SYNOPSIS setsid program [ arg ... ] DESCRIPTION setsid runs a program in a new session. |
可见 setsid 的使用也是非常方便的,也只需在要处理的命令前加上 setsid 即可。
[root@pvcent107 ~]# setsid ping www.ibm.com [root@pvcent107 ~]# ps -ef |grep www.ibm.com root 31094 1 0 07:28 ? 00:00:00 ping www.ibm.com root 31102 29217 0 07:29 pts/4 00:00:00 grep www.ibm.com [root@pvcent107 ~]# |
值得注意的是,上例中我们的进程 ID(PID)为31094,而它的父 ID(PPID)为1(即为 init 进程 ID),并不是当前终端的进程 ID。请将此例与nohup 例中的父 ID 做比较。
3。&
这里还有一个关于 subshell 的小技巧。我们知道,将一个或多个命名包含在“()”中就能让这些命令在子 shell 中运行中,从而扩展出很多有趣的功能,我们现在要讨论的就是其中之一。
当我们将"&"也放入“()”内之后,我们就会发现所提交的作业并不在作业列表中,也就是说,是无法通过jobs
来查看的。让我们来看看为什么这样就能躲过 HUP 信号的影响吧。
[root@pvcent107 ~]# (ping www.ibm.com &) [root@pvcent107 ~]# ps -ef |grep www.ibm.com root 16270 1 0 14:13 pts/4 00:00:00 ping www.ibm.com root 16278 15362 0 14:13 pts/4 00:00:00 grep www.ibm.com [root@pvcent107 ~]# |
从上例中可以看出,新提交的进程的父 ID(PPID)为1(init 进程的 PID),并不是当前终端的进程 ID。因此并不属于当前终端的子进程,从而也就不会受到当前终端的 HUP 信号的影响了。
我们已经知道,如果事先在命令前加上 nohup 或者 setsid 就可以避免 HUP 信号的影响。但是如果我们未加任何处理就已经提交了命令,该如何补救才能让它避免 HUP 信号的影响呢?
这时想加 nohup 或者 setsid 已经为时已晚,只能通过作业调度和 disown 来解决这个问题了。让我们来看一下 disown 的帮助信息:
disown [-ar] [-h] [jobspec ...] Without options, each jobspec is removed from the table of active jobs. If the -h option is given, each jobspec is not removed from the table, but is marked so that SIGHUP is not sent to the job if the shell receives a SIGHUP. If no jobspec is present, and neither the -a nor the -r option is supplied, the current job is used. If no jobspec is supplied, the -a option means to remove or mark all jobs; the -r option without a jobspec argument restricts operation to running jobs. The return value is 0 unless a jobspec does not specify a valid job. |
可以看出,我们可以用如下方式来达成我们的目的。
- 用
disown -h jobspec
来使某个作业忽略HUP信号。 - 用
disown -ah
来使所有的作业都忽略HUP信号。 - 用
disown -rh
来使正在运行的作业忽略HUP信号。
需要注意的是,当使用过 disown 之后,会将把目标作业从作业列表中移除,我们将不能再使用jobs
来查看它,但是依然能够用ps -ef
查找到它。
但是还有一个问题,这种方法的操作对象是作业,如果我们在运行命令时在结尾加了"&"来使它成为一个作业并在后台运行,那么就万事大吉了,我们可以通过jobs
命令来得到所有作业的列表。但是如果并没有把当前命令作为作业来运行,如何才能得到它的作业号呢?答案就是用 CTRL-z(按住Ctrl键的同时按住z键)了!
CTRL-z 的用途就是将当前进程挂起(Suspend),然后我们就可以用jobs
命令来查询它的作业号,再用bg jobspec
来将它放入后台并继续运行。需要注意的是,如果挂起会影响当前进程的运行结果,请慎用此方法。
disown 示例1(如果提交命令时已经用“&”将命令放入后台运行,则可以直接使用“disown”)
[root@pvcent107 build]# cp -r testLargeFile largeFile & [1] 4825 [root@pvcent107 build]# jobs [1]+ Running cp -i -r testLargeFile largeFile & [root@pvcent107 build]# disown -h %1 [root@pvcent107 build]# ps -ef |grep largeFile root 4825 968 1 09:46 pts/4 00:00:00 cp -i -r testLargeFile largeFile root 4853 968 0 09:46 pts/4 00:00:00 grep largeFile [root@pvcent107 build]# logout |
disown 示例2(如果提交命令时未使用“&”将命令放入后台运行,可使用 CTRL-z 和“bg”将其放入后台,再使用“disown”)
[root@pvcent107 build]# cp -r testLargeFile largeFile2 [1]+ Stopped cp -i -r testLargeFile largeFile2 [root@pvcent107 build]# bg %1 [1]+ cp -i -r testLargeFile largeFile2 & [root@pvcent107 build]# jobs [1]+ Running cp -i -r testLargeFile largeFile2 & [root@pvcent107 build]# disown -h %1 [root@pvcent107 build]# ps -ef |grep largeFile2 root 5790 5577 1 10:04 pts/3 00:00:00 cp -i -r testLargeFile largeFile2 root 5824 5577 0 10:05 pts/3 00:00:00 grep largeFile2 [root@pvcent107 build]# |
我们已经知道了如何让进程免受 HUP 信号的影响,但是如果有大量这种命令需要在稳定的后台里运行,如何避免对每条命令都做这样的操作呢?
此时最方便的方法就是 screen 了。简单的说,screen 提供了 ANSI/VT100 的终端模拟器,使它能够在一个真实终端下运行多个全屏的伪终端。screen 的参数很多,具有很强大的功能,我们在此仅介绍其常用功能以及简要分析一下为什么使用 screen 能够避免 HUP 信号的影响。我们先看一下 screen 的帮助信息:
SCREEN(1) SCREEN(1) NAME screen - screen manager with VT100/ANSI terminal emulation SYNOPSIS screen [ -options ] [ cmd [ args ] ] screen -r [[pid.]tty[.host]] screen -r sessionowner/[[pid.]tty[.host]] DESCRIPTION Screen is a full-screen window manager that multiplexes a physical terminal between several processes (typically interactive shells). Each virtual terminal provides the functions of a DEC VT100 terminal and, in addition, several control functions from the ISO 6429 (ECMA 48, ANSI X3.64) and ISO 2022 standards (e.g. insert/delete line and support for multiple character sets). There is a scrollback history buffer for each virtual terminal and a copy-and-paste mechanism that allows moving text regions between windows. |
使用 screen 很方便,有以下几个常用选项:
- 用
screen -dmS session name
来建立一个处于断开模式下的会话(并指定其会话名)。 - 用
screen -list
来列出所有会话。 - 用
screen -r session name
来重新连接指定会话。 - 用快捷键
CTRL-a d
来暂时断开当前会话。
[root@pvcent107 ~]# screen -dmS Urumchi [root@pvcent107 ~]# screen -list There is a screen on: 12842.Urumchi (Detached) 1 Socket in /tmp/screens/S-root. [root@pvcent107 ~]# screen -r Urumchi |
当我们用“-r”连接到 screen 会话后,我们就可以在这个伪终端里面为所欲为,再也不用担心 HUP 信号会对我们的进程造成影响,也不用给每个命令前都加上“nohup”或者“setsid”了。这是为什么呢?让我来看一下下面两个例子吧。
[root@pvcent107 ~]# ping www.google.com & [1] 9499 [root@pvcent107 ~]# pstree -H 9499 init─┬─Xvnc ├─acpid ├─atd ├─2*[sendmail] ├─sshd─┬─sshd───bash───pstree │ └─sshd───bash───ping |
我们可以看出,未使用 screen 时我们所处的 bash 是 sshd 的子进程,当 ssh 断开连接时,HUP 信号自然会影响到它下面的所有子进程(包括我们新建立的 ping 进程)。
[root@pvcent107 ~]# screen -r Urumchi [root@pvcent107 ~]# ping www.ibm.com & [1] 9488 [root@pvcent107 ~]# pstree -H 9488 init─┬─Xvnc ├─acpid ├─atd ├─screen───bash───ping ├─2*[sendmail] |
而使用了 screen 后就不同了,此时 bash 是 screen 的子进程,而 screen 是 init(PID为1)的子进程。那么当 ssh 断开连接时,HUP 信号自然不会影响到 screen 下面的子进程了。
现在几种方法已经介绍完毕,我们可以根据不同的场景来选择不同的方案。nohup/setsid 无疑是临时需要时最方便的方法,disown 能帮助我们来事后补救当前已经在运行了的作业,而 screen 则是在大批量操作时不二的选择了。
from: http://www.ibm.com/developerworks/cn/linux/l-cn-nohup/
http://soft.chinabyte.com/os/28/11231528.shtml
----------------------------------------------------------------------------------------------------------------------------
在Linux中,如果要让进程在后台运行,一般情况下,我们在命令后面加上&即可,实际上,这样是将命令放入到一个作业队列中了:
$ ./test.sh & [1] 17208 $ jobs -l [1]+ 17208 Running ./test.sh &
对于已经在前台执行的命令,也可以重新放到后台执行,首先按ctrl+z暂停已经运行的进程,然后使用bg命令将停止的作业放到后台运行:
$ ./test.sh [1]+ Stopped ./test.sh $ bg %1 [1]+ ./test.sh & $ jobs -l [1]+ 22794 Running ./test.sh &
但是如上方到后台执行的进程,其父进程还是当前终端shell的进程,而一旦父进程退出,则会发送hangup信号给所有子进程,子进程收到hangup以后也会退出。如果我们要在退出shell的时候继续运行进程,则需要使用nohup忽略hangup信号,或者setsid将将父进程设为init进程(进程号为1)
$ echo $$ 21734 $ nohup ./test.sh & [1] 29016 $ ps -ef | grep test 515 29710 21734 0 11:47 pts/12 00:00:00 /bin/sh ./test.sh 515 29713 21734 0 11:47 pts/12 00:00:00 grep test
$ setsid ./test.sh & [1] 409 $ ps -ef | grep test 515 410 1 0 11:49 ? 00:00:00 /bin/sh ./test.sh 515 413 21734 0 11:49 pts/12 00:00:00 grep test
上面的试验演示了使用nohup/setsid加上&使进程在后台运行,同时不受当前shell退出的影响。那么对于已经在后台运行的进程,该怎么办呢?可以使用disown命令:
$ ./test.sh & [1] 2539 $ jobs -l [1]+ 2539 Running ./test.sh & $ disown -h %1 $ ps -ef | grep test 515 410 1 0 11:49 ? 00:00:00 /bin/sh ./test.sh 515 2542 21734 0 11:52 pts/12 00:00:00 grep test
另外还有一种方法,即使将进程在一个subshell中执行,其实这和setsid异曲同工。方法很简单,将命令用括号() 括起来即可:
$ (./test.sh &) $ ps -ef | grep test 515 410 1 0 11:49 ? 00:00:00 /bin/sh ./test.sh 515 12483 21734 0 11:59 pts/12 00:00:00 grep test
注:本文试验环境为Red Hat Enterprise Linux AS release 4 (Nahant Update 5),shell为/bin/bash,不同的OS和shell可能命令有些不一样。例如AIX的ksh,没有disown,但是可以使用nohup -p PID来获得disown同样的效果。
还有一种更加强大的方式是使用screen,首先创建一个断开模式的虚拟终端,然后用-r选项重新连接这个虚拟终端,在其中执行的任何命令,都能达到nohup的效果,这在有多个命令需要在后台连续执行的时候比较方便:
$ screen -dmS screen_test $ screen -list There is a screen on: 27963.screen_test (Detached) 1 Socket in /tmp/uscreens/S-jiangfeng. $ screen -r screen_test
from : http://www.ningoo.net/html/2008/how_to_run_processes_on_background_in_linux.html
------------------------------------------------------------------------------------------------------------------------------------------------------
nohup、setsid、&和disown
在执行命令时,偶尔会碰到需要让对应进程无间断执行的情况。前段时间看到IBM官网的一篇文章,由于不让转载(原文位置:IBM),遂简单记录如下:
我们知道,当用户注销(logout)或者网络断开时,终端会收到 HUP(hangup)信号从而关闭其所有子进程。因此,我们的解决办法就有两种途径:要么让进程忽略 HUP 信号,要么让进程运行在新的会话里从而成为不属于此终端的子进程。
1. nohup
显而易见,nohup命令的功能是使进程忽略hangup信号,从而持续执行。nohup 的使用是十分方便的,只需在要处理的命令前加上 nohup 即可,标准输出和标准错误缺省会被重定向到 nohup.out 文件中。一般我们可在结尾加上"&"来将命令同时放入后台运行,也可用">filename 2>&1"来更改缺省的重定向文件名。
如:nohup myUbuntuSourceSyncCmd.pl >./sources/ubuntu/sync.log 2>&1 &
这样起到了三个效果:进程后台执行;忽略hangup信号;输出重定向。
2. setsid
setsid中的sid指的是session id,意指以该命令运行的进程是一个新的session,因此其父进程id不属于当前终端。实际上,setsid运行的进程,其父进程id(PPID)为1(init 进程的 PID)。因此,setsid解决问题用的是第二种途径。
如:setsid myUbuntuSourceSyncCmd.pl >./sources/ubuntu/sync.log 2>&1 &
格式与nohup相仿,后台运行也需加上&,但输出重定向必须手动设置。
3. 括号()与&
&代表后台运行(注意输出并没有被重定向);此外,我们知道,将一个或多个命名包含在“()”中就能让这些命令在子 shell 中运行中,从而扩展出很多有趣的功能,我们现在要讨论的就是其中之一。
当我们将"&"也放入“()”内之后,我们就会发现所提交的作业并不在作业列表中,也就是说,是无法通过jobs来查看的。
如:(myUbuntuSourceSyncCmd.pl >./sources/ubuntu/sync.log 2>&1 &)
以这种方式运行程序,新提交的进程的父 ID为1,并不是当前终端的进程 ID。因此并不属于当前终端的子进程,从而也就不会受到当前终端的 HUP 信号的影响了。
4. disown
如果我们未加任何处理就已经提交了命令,这时想加 nohup 或者 setsid 已经为时已晚,只能通过作业调度和 disown 来解决这个问题了。让我们来看一下 disown 的帮助信息:
disown [-ar] [-h] [jobspec ...]
Without options, each jobspec is removed from the table of
active jobs. If the -h option is given, each jobspec is not
removed from the table, but is marked so that SIGHUP is not
sent to the job if the shell receives a SIGHUP. If no jobspec
is present, and neither the -a nor the -r option is supplied,
the current job is used. If no jobspec is supplied, the -a
option means to remove or mark all jobs; the -r option without
a jobspec argument restricts operation to running jobs. The
return value is 0 unless a jobspec does not specify a valid
job.
可以看出,我们可以用如下方式来达成我们的目的。
a. 用disown -h jobspec 来使某个作业忽略HUP信号。
b. 用disown -ah 来使所有的作业都忽略HUP信号。
c. 用disown -rh 来使正在运行的作业忽略HUP信号。
需要注意的是,当使用过 disown 之后,会将把目标作业从作业列表中移除,我们将不能再使用jobs来查看它,但是依然能够用ps -ef查找到它。
但是还有一个问题,这种方法的操作对象是作业,如果我们在运行命令时在结尾加了"&"来使它成为一个作业并在后台运行,那么就万事大吉了,我们可以通过jobs命令来得到所有作业的列表。但是如果并没有把当前命令作为作业来运行,如何才能得到它的作业号呢?答案就是用 CTRL-z(按住Ctrl键的同时按住z键)了!
CTRL-z 的用途就是将当前进程挂起(Suspend),然后我们就可以用jobs命令来查询它的作业号,再用bg jobspec 来将它放入后台并继续运行。需要注意的是,如果挂起会影响当前进程的运行结果,慎用此方法。
示例:
root@ubuntu-server:/mnt/ftp# jobs
[1]+ Running ./sync_mirror.sh &
root@ubuntu-server:/mnt/ftp# disown -h %1
root@ubuntu-server:/mnt/ftp# ps -ef|grep sync_mirror.sh
root 8650 22271 0 15:08 pts/0 00:00:00 grep sync_mirror.sh
root 16748 22271 0 Mar31 pts/0 00:00:00 /bin/sh -e ./sync_mirror.sh
另外还有一个命令screen。screen 提供了 ANSI/VT100 的终端模拟器,使它能够在一个真实终端下运行多个全屏的伪终端。screen 的参数很多,具有很强大的功能。本篇不做介绍。
from: http://hi.baidu.com/xtyangjie/item/3f5aaff7e9c145de6225d23f