切换网络配置之脚本法
由于现在移动设备的普遍使用等情况,需要经常改变网络配置,如:IP地址等。还有就象我们单位,因为上网的限制而出现的“抢ip”现象。使用简单的命令,就可以迅速修改ip,真真做到“上网,但不带走一片树叶“
D:\>netsh dump interface lacal area connection >MyNet.txt
现在,D:\下有一个文件:MyNet.txt,内容如下:
#========================
# Interface configuration
#========================
pushd interface
reset all
popd
# End of interface configuration
#========================
# Interface configuration
#========================
pushd interface ipv6
uninstall
popd
# End of interface configuration
# ----------------------------------
# ISATAP Configuration
# ----------------------------------
pushd interface ipv6 isatap
popd
# End of ISATAP configuration
# ----------------------------------
# 6to4 Configuration
# ----------------------------------
pushd interface ipv6 6to4
reset
popd
# End of 6to4 configuration
#========================
# Port Proxy configuration
#========================
pushd interface portproxy
reset
popd
# End of Port Proxy configuration
# ----------------------------------
# Interface IP Configuration
# ----------------------------------
pushd interface ip
# Interface IP Configuration for "VMware Network Adapter VMnet8"
set address name="VMware Network Adapter VMnet8" source=static addr=192.168.159.1 mask=255.255.255.0
set dns name="VMware Network Adapter VMnet8" source=static addr=none register=PRIMARY
set wins name="VMware Network Adapter VMnet8" source=static addr=none
# Interface IP Configuration for "VMware Network Adapter VMnet1"
set address name="VMware Network Adapter VMnet1" source=static addr=192.168.148.1 mask=255.255.255.0
set dns name="VMware Network Adapter VMnet1" source=static addr=none register=PRIMARY
set wins name="VMware Network Adapter VMnet1" source=static addr=none
# Interface IP Configuration for "Local Area Connection"
set address name="Local Area Connection" source=static addr=192.168.0.183 mask=255.255.255.0
set address name="Local Area Connection" gateway=192.168.0.1 gwmetric=0
set dns name="Local Area Connection" source=static addr=221.136.0.1 register=PRIMARY
set wins name="Local Area Connection" source=static addr=none
popd
# End of interface IP configuration
# -----------------------------------------
# aaaa Configuration
# -----------------------------------------
# This script will NOT work across different versions of IAS.
# -----------------------------------------
# aaaa configuration script.
# Known Issues and limitations:
# Import/Export between different versions is not supported.
Failed attempting to show the aaaa configuration.
# End of aaaa configuration.
# -----------------------------------------
# Remote Access Configuration
# -----------------------------------------
pushd ras
set authmode mode = standard
delete authtype type = PAP
delete authtype type = SPAP
delete authtype type = MD5CHAP
delete authtype type = MSCHAP
delete authtype type = MSCHAPv2
delete authtype type = EAP
add authtype type = MSCHAP
delete link type = SWC
delete link type = LCP
add link type = SWC
add link type = LCP
delete multilink type = MULTI
delete multilink type = BACP
add multilink type = MULTI
add multilink type = BACP
set user name = __vmware_user__ dialin = policy cbpolicy = none
set user name = Administrator dialin = policy cbpolicy = none
set user name = Guest dialin = policy cbpolicy = none
set user name = IUSR_LABSERVER2003 dialin = deny cbpolicy = none
set user name = IWAM_LABSERVER2003 dialin = deny cbpolicy = none
set user name = kavamorph dialin = policy cbpolicy = none
set user name = ss dialin = policy cbpolicy = none
set user name = SUPPORT_388945a0 dialin = policy cbpolicy = none
popd
# End of Remote Access configuration.
# -----------------------------------------
# Remote Access AppleTalk Configuration
# -----------------------------------------
pushd ras appletalk
set negotiation mode = allow
popd
# End of Remote Access AppleTalk Configuration.
# -----------------------------------------
# Remote Access Diagnostics Configuration
# -----------------------------------------
pushd ras diagnostics
set rastracing component = * state = disabled
set modemtracing state = disabled
set cmtracing state = disabled
set securityeventlogs state = disabled
popd
# End of Remote Access Diagnostics Configuration.
# -----------------------------------------
# Remote Access IP Configuration
# -----------------------------------------
pushd ras ip
delete pool
set negotiation mode = allow
set access mode = all
set addrreq mode = deny
set broadcastnameresolution mode = disabled
set addrassign method = auto
popd
# End of Remote Access IP configuration.
# -----------------------------------------
# Remote Access IPX Configuration
# -----------------------------------------
pushd ras ipx
set negotiation mode = deny
set access mode = all
set nodereq mode = allow
set netassign method = autosame
popd
# End of Remote Access IPX configuration.
# -----------------------------------------
# Remote Access NBF Configuration
# -----------------------------------------
pushd ras netbeui
set negotiation mode = allow
set access mode = all
popd
# End of Remote Access NBF configuration.
# -----------------------------------------
# Remote Access AAAA Configuration
# -----------------------------------------
pushd ras aaaa
set authentication provider = windows
set accounting provider = windows
delete authserver name = *
delete acctserver name = *
popd
# End of Remote Access AAAA configuration.
# Routing Configuration
pushd routing
reset
popd
# IP Configuration
pushd routing ip
reset
set loglevel error
add preferenceforprotocol proto=LOCAL preflevel=1
add preferenceforprotocol proto=NetMgmt preflevel=10
add preferenceforprotocol proto=STATIC preflevel=3
add preferenceforprotocol proto=NONDOD preflevel=5
add preferenceforprotocol proto=AUTOSTATIC preflevel=7
add preferenceforprotocol proto=OSPF preflevel=110
add preferenceforprotocol proto=RIP preflevel=120
add interface name="Local Area Connection" state=enable
set filter name="Local Area Connection" fragcheck=disable
add interface name="VMware Network Adapter VMnet8" state=enable
set filter name="VMware Network Adapter VMnet8" fragcheck=disable
add interface name="VMware Network Adapter VMnet1" state=enable
set filter name="VMware Network Adapter VMnet1" fragcheck=disable
add interface name="Internal" state=enable
set filter name="Internal" fragcheck=disable
add interface name="Loopback" state=enable
set filter name="Loopback" fragcheck=disable
popd
# End of IP configuration
# ----------------------------------
# DNS Proxy configuration
# ----------------------------------
pushd routing ip dnsproxy
uninstall
popd
# End of DNS proxy configuration
# ----------------------------------
# IGMP Configuration
# ----------------------------------
pushd routing ip igmp
uninstall
popd
# End of IGMP configuration
# ----------------------------------
# NAT configuration
# ----------------------------------
pushd routing ip nat
uninstall
popd
# ----------------------------------
# OSPF configuration
# ----------------------------------
pushd routing ip ospf
uninstall
popd
# End of OSPF configuration
# ----------------------------------
# DHCP Relay Agent configuration
# ----------------------------------
pushd routing ip relay
uninstall
popd
# End of DHCP Relay configuration
# ----------------------------------
# RIP configuration
# ----------------------------------
pushd routing ip rip
uninstall
popd
# End of RIP configuration
# ----------------------------------
# Router Discovery Configuration
# ----------------------------------
pushd routing ip routerdiscovery
uninstall
add interface name="Local Area Connection" disc=disable minint=7 maxint=10 life=30 level=0
add interface name="VMware Network Adapter VMnet8" disc=disable minint=7 maxint=10 life=30 level=0
add interface name="VMware Network Adapter VMnet1" disc=disable minint=7 maxint=10 life=30 level=0
add interface name="Internal" disc=disable minint=7 maxint=10 life=30 level=0
add interface name="Loopback" disc=disable minint=7 maxint=10 life=30 level=0
popd
# ----------------------------------
# DHCP Allocator Configuration
# ----------------------------------
pushd routing ip autodhcp
uninstall
popd
# End of DHCP Allocator Configuration
Loading of DLL WinsEvnt.dll failed.
Wins Operation failed with Error There are no more endpoints available from the endpoint mapper.
做好了第一步,现在开始第二步:
通过控制面板修改网络设置,修改完以后在CMD下输入:
D:\>netsh dump interface lacal area connection >MyNet2.txt
大功告成,现在有两个网络配置的脚本了,如果你想切换,在CMD下输入:
D:\>netsh dump >mynet.txt
或
D:\>netsh dump >mynet2.txt
就可以迅速切换网络配置了。