centos 7.3 设置静态IP
注:本文来源:张亮博客 的 《centos 7.3 设置静态IP或ping 报name or service not known》
首先把虚拟机配置为桥接模式,然后开启
再你打算修改虚拟机IP之前首先ping下127.0.0.1看看网卡是否是好的(如果127.0.0.1都ping不通的话,那网卡就是坏的了…)
View Code1 [root@localhost /]# ping 127.0.0.1 2 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 3 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.106 ms 4 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.095 ms 5 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.097 ms 6 64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.073 ms 7 64 bytes from 127.0.0.1: icmp_seq=5 ttl=64 time=0.058 ms 8 64 bytes from 127.0.0.1: icmp_seq=6 ttl=64 time=0.097 ms 9 64 bytes from 127.0.0.1: icmp_seq=7 ttl=64 time=0.375 ms 10 ^C64 bytes from 127.0.0.1: icmp_seq=8 ttl=64 time=0.733 ms 11 64 bytes from 127.0.0.1: icmp_seq=9 ttl=64 time=0.095 ms 12 64 bytes from 127.0.0.1: icmp_seq=10 ttl=64 time=0.102 ms 13 ^C 14 --- 127.0.0.1 ping statistics --- 15 10 packets transmitted, 10 received, 0% packet loss, time 9006ms 16 rtt min/avg/max/mdev = 0.058/0.183/0.733/0.202 ms 17 [root@localhost /]#
在设置静态IP之前可以先看下自己当前开启的网卡:
1 [root@localhost /]# ifconfig 2 ens32: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 3 inet 192.168.0.121 netmask 255.255.255.0 broadcast 192.168.0.255 4 inet6 fe80::9474:4a7c:66fd:8d90 prefixlen 64 scopeid 0x20<link> 5 ether 00:0c:29:e5:c1:96 txqueuelen 1000 (Ethernet) 6 RX packets 4436 bytes 372786 (364.0 KiB) 7 RX errors 0 dropped 0 overruns 0 frame 0 8 TX packets 871 bytes 147085 (143.6 KiB) 9 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 10 11 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 12 inet 127.0.0.1 netmask 255.0.0.0 13 inet6 ::1 prefixlen 128 scopeid 0x10<host> 14 loop txqueuelen 1 (Local Loopback) 15 RX packets 16 bytes 1320 (1.2 KiB) 16 RX errors 0 dropped 0 overruns 0 frame 0 17 TX packets 16 bytes 1320 (1.2 KiB) 18 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 19 20 [root@localhost /]#
1.设置网卡ens32静态IP
1 [root@localhost /]# cd /etc/sysconfig/network-scripts/ #注意点cd与“/etc”之间的空格 2 [root@localhost network-scripts]# 3 [root@localhost network-scripts]# ls #查看network-scripts下的所有文件 4 ifcfg-ens32 ifdown-eth ifdown-isdn ifdown-sit ifup ifup-ib ifup-plip ifup-routes ifup-tunnel network-functions-ipv6 5 ifcfg-lo ifdown-ib ifdown-post ifdown-Team ifup-aliases ifup-ippp ifup-plusb ifup-sit ifup-wireless 6 ifdown ifdown-ippp ifdown-ppp ifdown-TeamPort ifup-bnep ifup-ipv6 ifup-post ifup-Team init.ipv6-global 7 ifdown-bnep ifdown-ipv6 ifdown-routes ifdown-tunnel ifup-eth ifup-isdn ifup-ppp ifup-TeamPort network-functions 8 [root@localhost network-scripts]# 9 10 11 使用vi进行编辑 12 [root@localhost network-scripts]# vi ifcfg-ens32 13 【点击i 进行插入 完成之后Esc 并输入:wq 进行保存】 14 [root@localhost network-scripts]# vi ifcfg-ens32 15 TYPE="Ethernet" 16 BOOTPROTO="static" #启用静态IP地址 17 DEFROUTE="yes" 18 PEERDNS="yes" 19 PEERROUTES="yes" 20 IPV4_FAILURE_FATAL="no" 21 IPV6INIT="yes" 22 IPV6_AUTOCONF="yes" 23 IPV6_DEFROUTE="yes" 24 IPV6_PEERDNS="yes" 25 IPV6_PEERROUTES="yes" 26 IPV6_FAILURE_FATAL="no" 27 IPV6_ADDR_GEN_MODE="stable-privacy" 28 NAME="ens32" 29 UUID="17e371b3-5107-4d72-a58f-e8f71396fd68" 30 DEVICE="ens32" 31 ONBOOT="yes" 32 IPADDR=“192.168.0.121” 33 GATEWAY=“192.168.0.1” 34 35 修改: 36 BOOTPROTO=“static” #启用静态IP地址 37 加入个: 38 IPADDR=“192.168.0.121” #设置IP地址 39 GATEWAY=“192.168.0.1” #设置网关
【注意】设置好后保存!
然后重启网络吧:
1 [root@localhost ~]# service network restart #重启网络 2 Restarting network (via systemctl): [ OK ] 3 [root@localhost ~]# 4 5 6 [root@localhost ~]# ping 192.168.0.107 #ping局域网内的IP正常 7 PING 192.168.0.107 (192.168.0.107) 56(84) bytes of data. 8 64 bytes from 192.168.0.107: icmp_seq=1 ttl=64 time=0.759 ms 9 64 bytes from 192.168.0.107: icmp_seq=2 ttl=64 time=1.07 ms 10 64 bytes from 192.168.0.107: icmp_seq=3 ttl=64 time=0.615 ms 11 ^C 12 --- 192.168.0.107 ping statistics --- 13 3 packets transmitted, 3 received, 0% packet loss, time 2004ms 14 rtt min/avg/max/mdev = 0.615/0.816/1.076/0.195 ms 15 [root@localhost ~]# ping www.baidu.com #ping百度域名还是不行 16 ping: www.baidu.com: Name or service not known #出现这个错误
为人:谦逊、激情、博学、审问、慎思、明辨、 笃行
学问:纸上得来终觉浅,绝知此事要躬行
为事:工欲善其事,必先利其器。
态度:道阻且长,行则将至;行而不辍,未来可期
.....................................................................
------- 桃之夭夭,灼灼其华。之子于归,宜其室家。 ---------------
------- 桃之夭夭,有蕡其实。之子于归,宜其家室。 ---------------
------- 桃之夭夭,其叶蓁蓁。之子于归,宜其家人。 ---------------
=====================================================================
* 博客文章部分截图及内容来自于学习的书本及相应培训课程以及网络其他博客,仅做学习讨论之用,不做商业用途。
* 如有侵权,马上联系我,我立马删除对应链接。 * @author Alan -liu * @Email no008@foxmail.com
转载请标注出处! ✧*꧁一品堂.技术学习笔记꧂*✧. ---> https://www.cnblogs.com/ios9/
学问:纸上得来终觉浅,绝知此事要躬行
为事:工欲善其事,必先利其器。
态度:道阻且长,行则将至;行而不辍,未来可期
.....................................................................
------- 桃之夭夭,灼灼其华。之子于归,宜其室家。 ---------------
------- 桃之夭夭,有蕡其实。之子于归,宜其家室。 ---------------
------- 桃之夭夭,其叶蓁蓁。之子于归,宜其家人。 ---------------
=====================================================================
* 博客文章部分截图及内容来自于学习的书本及相应培训课程以及网络其他博客,仅做学习讨论之用,不做商业用途。
* 如有侵权,马上联系我,我立马删除对应链接。 * @author Alan -liu * @Email no008@foxmail.com
转载请标注出处! ✧*꧁一品堂.技术学习笔记꧂*✧. ---> https://www.cnblogs.com/ios9/