General Science Introduction of the Vibrating Feeder

Vibrating machine , also known as vibrating feeder. in the production process, vibrating feeder can timely, continuously and evenly send the blocks ,particles materials to the feeding devices from the storage. In the sand stone production line, this machine can continuously provide materials for the crushing machine. And coarse, fine screen the materials, this machine is widely used in metallurgy, coal mining, mineral processing, building materials, chemicals, abrasives and other industries.

Performance characteristics

Feeder is an economic and technical indicators advanced feeding equipment, compared with the other feeding equipment, it has the following features: (1) small size, light weight, simple and compact structure; ② installation, maintenance fees is low, low operating costs; ③ high efficiency ability to feed; ④ low noise, and will help to improve the work environment; ⑤ low power consumption, high power factor; ⑥ this equipment works steady even under the resonance state, and thus the amplitude stable, reliable operation, adaptability to a variety of materials. strong; ⑦ plus ingredients,it is required to adjust the the eccentric block can easily stepless adjustment of feeding amount. The simple structure of vibrating feeder, feeder uniform, continuous performance, adjustable exciting force; subject to change and control the flow, easy to operate; eccentric block as vibration source, low noise, low power consumption, good regulating performance, no red material phenomenon; prevent dust pollution in enclosed fuselage smooth vibration, reliable operation, long life; exciting force can be adjusted, and can be changed at any time and control flow, stable and easy to adjust; vibration motor as vibration source, low noise, consumption electrically small, good regulating performance, no red material phenomenon. 
According to the requirements of the equipment performance, when configurating, the design should be  minimize material tank pressure required by the manufacturer, Bunker effective discharge port shall not be greater than one-fourth of the slot width, material flow speed control 6-18m / min feeding capacity larger materials, silo at the bottom discharge should be set a sufficient height Elam mine board; stopped mine does not affect the performance of the feeder, the board shall be fixed in the tank. Smooth discharge for the silo, silo posterior wall inclination best design is 55-65 degrees.

Advantages and characteristics

  
1, vibration stable ,  works reliable.
2, special trash rack design  to prevent material clogging.
3 . adjustable trash rack gap.
4, more wearable pieces.
5, for preventing the wear parts be wored by the small materials, small material should be separated to increase production.
Optional frequency motor can be stalled to adjust the frequency, thus changing the production, and convenient to control the feeding amount.


original link: http://linglingkara01.blogspot.com/
 

mobile jaw crusher : http://www.mine-crusher.com/jawcrusher.htm
Hammer crusher : http://www.ore-machine.com/hammer-crusher.html

posted @ 2012-09-13 14:31  kara liu  阅读(153)  评论(0编辑  收藏  举报