Security Production Rules of the Rotary Kiln
Whether the equipment( such as ball mill, impact crusher) falls into any category, production safety should always be placed in the first position. Rotary kiln production is no exception,the following is the rotary kiln production safety rules ,the related recommendations, and overhaul of rotary kiln Notations:
1, the rotary kiln maintenance. "Listed" repair system should be implemented, the striking "someone work" , "not to start "and so forth should be written on the card, cut off the power when using the machine, just in case.
2, the
rotary kiln stopped overhaul.
(1) must notify maintenance personnel of
various parts to finish the tool, all personnels should stay away from working
place, and recover the work permit before changing the rotary kiln.
②in case
of unsafe conditions, the overhaul leader should be responsible for the danger
accidents.
③ If the work permit did not receive completely and change the
rotary kiln, the kiln turner should be responsible for the rotary kiln danger.
(4) after transferring the kiln properly, the "work permit" should be sent
to the maintenance jobs at any time, this is to show that the rotary kiln is
completed before the overhaul.
⑤ when the repair is completed, immediately
return the "work permit", and accept and commission the machine.
3.When checking or cleaning the coal warehouse, the operators should not be
less than two to avoid absorbing large quantities of pulverized coal and
fainting, or to inhaled CO overdose which leads to nobody rescue.
4, before
starting the equipment, we need to get the permit.
5, overhaul equipment
lights, prohibited use the 220-volt lights.
6. Rotary kilns, in addition to the operator and relevant staffs, the
remaining staffs have to leave the kiln, for preventing the severe burning
pulverized coal, gas volume expansion backfire and burn people.
7, the
operating equipment can not be repaired: as to whether the device is in
operation, we should not use the quiz method of contacting with the hands and
feet, for preventing burning by the running machine .
8, non-electrician
should not tamper with electrical equipments, staffs are required to wear
overalls, Ping cap.
9, when leathering or circling into the demolition kiln,
high temperature shoes, gloves, masks must be wore to prevent the brick or kiln
skin burns or bumps.
10, when the coal powder burn naturally outside the
warehouse, the method of watering can not be adopted, because the coal
fineness is very fine, having liquidity, if we watering them, the coal powder
will dispel, the fire then will be spread.
Sand washer : http://www.best-crushers.com/sandwasher.htm
Rotary kiln :
http://www.best-crushers.com/rotarykiln.htm
mobile jaw crushers : http://www.ore-mills.com/jaw-crusher.html
Impact
crusher : http://www.mine-crusher.com/