Artificial Sand Making Equipment Operation Taboos
Sand can be applied to the production after the purchase and installation, energy consumption is low, which can meet your needs in the planned date, but do not get too excited while completing the task, because there are top five taboos in the sand making operation , we must first learn them to avoid duplication of efforts.
◆ Conduct operation without reading operation
instruction
After purchasing the equipment,the operator should read operation
instructions and the related knowledges carefully , be familiar with the use and
maintenance conditions of sand maker, in order to
avoid unnecessary accidents, don't operate by himself in the case of unskilled
.
◆ Without turning off the power when outage
We should ensure the
adequate supply of electricity when the sand maker works, in the case of power
out-aging , be remember to cut off the power to avoid the unnecessary harm when
the power is suddenly supplied. At the same time, we should also finish a good
thing after working, for example, turn off the power before leaving, and develop
good work habits.
◆ Use the unqualified power
Use the qualified power,
not much put the un-roasted electrode, pay attention to the electrode quality
when decentralizing electrode and after decentralizing within a few minutes ,
move the electrode or the motor does not move as little as possible, take
various measures to prevent electrode soft off. deal with immediately in the
case of soft off .
◆ Operate in the case of having ore inside
Before the
sand begin working, the operator should first check whether the cavity have ore
or not. Sand maker is not allowed to start unload, with load startup will
cause electrical trip or machine parts damage, so the boot should be checked
before starting the machine, if having any ore or iron blocks, the operator
should clear them before starting.
◆ Only use ,without maintenance .
This
is the biggest taboos of sand maker , which is very important, sand maker's
long-term use will cause unnecessary wear of the machine, so be sure to
periodically check the degree of the machine wear, do maintenance regular ,
periodically lubricate your machine ,let it play a greater role.
The
above several taboos, looks like small things in the operation , sometimes the
operator is often easy to overlook, not knowing it is this negligence leads to
failure, thereby affecting the sand maker's work efficiency and shorting the
service life of the sand.