Application of Single Roll Crusher
The breaking mechanism of the single-roll crusher is composed of a rotating roller, a jaw plate. Toothed a bushing with a bolt mounted on the roller core, and prongs extending forwardly such as beak-shaped, after the bushing wear shiftable roller face of the jaws, the jaws hanging mandrel, jaws parquet wear-resistant liner. The spring pressure of the jaw by two rods by means of a top on the rack pull to keep a distance to the roller, so that the jaws and the roller. Roller shaft supporting live mounted on the bearing of the side walls of the rack, when only work rolls rotate, gob fed from the hopper, in the jaws and between rollers by compression, and by the impact of the tooth tip and splitting and grinding. In cases where the hard debris to fall, the force generated will compress the spring, the jaws leave the rollers increases the spout, so that the hard debris discharged to avoid mechanical damage. Roller shaft with the flywheel, in order to balance the crusher kinetic energy.
Single roll
crusher is actually part of the structure of the jaw crusher and
roll crusher combined, and thus has the characteristics of both crusher,
aircraft types, also known as jaw roll crusher. Single-roll crusher having a
large feed ports, the other surface of the roller equipped with different
crushing rack the higher rack bulk material when the bulk material feed, vise,
and splitting and shock method be broken, and then drops downward, its progress
is crushed to the required size by the smaller teeth. In a crusher there are
pre-crushed zone and the secondary crushing zone, and therefore can be used for
the coarse crushed material, and crushing the relatively large, up to 15. The
broken material block by the teeth on the roller edge toggle and the unloading
is mandatory discharge, crushed sticky material will not happen clogging.The
crusher is widely used in mining, metallurgy, building materials, road, railway,
water conservancy and chemical industry and many other
sectors.
Single roll crusher is designed for crushing medium hard or
soft materials, such as lime right, hard glue and coal. When the material is
relatively sticky wet (such as those containing limestone, etc.), it is a
crushing effect than using a jaw crusher and cone crusher
are good, especially compared to a broken flake glue the material, with jaw or
cone crusher both in performance and body compact square strengths. The
specifications of the single-roll crusher is represented by the diameter and
length of the roller.