Centos挂载NTFS移动硬盘
挂载移动硬盘
一。众所周知,在安装完Centos完了以后,是没有编译环境的,我自己挂上光盘,手动安装解决了几十的依赖关系,在配置些软件时,还是经常报些依赖软件包的缺失,很是头疼,后来百度了下centos需要装的编译环境,在这里记录下(使用yum安装)
yum install gcc gcc-c++ gcc-g77 flex bison autoconf automake bzip2-devel zlib-devel ncurses-devel libjpeg-devel libpng-devel libtiff-devel freetype-devel pam-devel openssl-devel libxml2-devel gettext-devel pcre-devel,如果嫌麻烦的话,那就直接yum groupinstall "Development tools"
二。安装NTFS-3G依赖FUSE的支持,所以先解压安装FUSE。
安装FUSE命令:yum install fuse
1)下载ntfs-3g工具:http://www.tuxera.com/community/ntfs-3g-download/
下载完成 ntfs-3g_ntfsprogs-2014.2.15.tgz
2)解压缩 tar -zxvf ntfs-3g_ntfsprogs-2014.2.15.tgz
解压缩后进入文件夹ntfs-3g_ntfsprogs-2014.2.15
3)编译并安装
./configure
make
make install
4)查看USB设备点
[root@Chen ntfs-3g_ntfsprogs-2016.2.22]# fdisk -l
Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x33e90d24
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sdb2 64 14594 116707328 8e Linux LVM
Disk /dev/mapper/vg_chen-lv_root: 53.7 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_chen-lv_swap: 3187 MB, 3187671040 bytes
255 heads, 63 sectors/track, 387 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_chen-lv_home: 62.6 GB, 62629347328 bytes
255 heads, 63 sectors/track, 7614 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x807f972d
Device Boot Start End Blocks Id System
/dev/sda1 1 38914 312569176 7 HPFS/NTFS
#fdisk -l (需要ROOT权限)
5)用root权限建立挂载点的文件目录
[root@Chen ntfs-3g_ntfsprogs-2016.2.22]# mkdir /mnt/win
6)执行挂载命令
命令:mount -t ntfs-3g /dev/sda /mnt/win 执行后出现如下:
NTFS signature is missing.
Failed to mount '/dev/sda': 无效的参数
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of apartition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
命令:# mount -t ntfs-3g /dev/sda1 /mnt/win 执行后出现如下:
The disk contains an unclean file system (0, 0).
The file system wasn't safely closed on Windows. Fixing.
[root@Chen ntfs-3g_ntfsprogs-2016.2.22]#
进入 /mnt/win,发现挂载成功,没有急,不过弄了一天了呵呵。
如果要开机自动挂载ntfs分区,需要更改/etc/fstab文件
用vi 打开fstab文件加入如下两行
/dev/sda3 /mnt/windows/d ntfs-3g defaults 0 0
/dev/sda4 /mnt/windows/e ntfs-3g defaults 0 0
posted on 2016-09-01 10:29 lazydragon 阅读(4211) 评论(0) 编辑 收藏 举报