spring---aop（2）---Spring AOP的JDK动态代理
写在前面
spring 事务是springAOP 的一个实现。我们以分析spring的事务，来分析spring的AOP实现。
基本知识
如果目标方法被spring的事务声明，则执行该目标方法的对象就会是spring动态生成的代理对象。如果目标方法的类有接口实现，那么产生的是jdk的动态代理，反之则是CGLIB。（使用了抽象工厂模式）
代理对象产生过程（以JDK为参考）
1. 产生代理对象的过程是在spring加载的过程中。（一个代理对象和一个InvocationHandler绑定，当代理对象的方法执行时，就会去执行InvocationHandler的invoke(Object proxy, Method method, Object[] args)方法），在该方法中你可以现在是否处理代理对象的目标方法。
代理对象的产生主要是ProxyFactory的getProxy()方法，内部通过AOPProxyFactory使用了抽象工厂模式，产生JdkDynamicAopProxy、ObjenesisCglibAopProxy
抽象工厂的实现类（参见详细过程）
public class DefaultAopProxyFactory implements AopProxyFactory, Serializable { public AopProxy createAopProxy(AdvisedSupport config) throws AopConfigException { if (config.isOptimize() || config.isProxyTargetClass() || hasNoUserSuppliedProxyInterfaces(config)) { Class<?> targetClass = config.getTargetClass(); if (targetClass == null) { throw new AopConfigException("TargetSource cannot determine target class: " + "Either an interface or a target is required for proxy creation."); } if (targetClass.isInterface() || Proxy.isProxyClass(targetClass)) { return new JdkDynamicAopProxy(config); } return new ObjenesisCglibAopProxy(config); } else { return new JdkDynamicAopProxy(config); } } }
获取代理对象的过程
final class JdkDynamicAopProxy implements AopProxy, InvocationHandler, Serializable { @Override public Object getProxy(ClassLoader classLoader) { if (logger.isDebugEnabled()) { logger.debug("Creating JDK dynamic proxy: target source is " + this.advised.getTargetSource()); } Class<?>[] proxiedInterfaces = AopProxyUtils.completeProxiedInterfaces(this.advised); findDefinedEqualsAndHashCodeMethods(proxiedInterfaces); return Proxy.newProxyInstance(classLoader, proxiedInterfaces, this); } }
层级关系如下
AOPProxyFactory 实现了类 DAOPProxyFactory
AOPProxy 实现类JdkDynamicAopProxy、CglibAopProxy
执行代理对象的invoke方法
前面已经讲过，再spring加载的时候，就加载了相关的代理对象。在代理对象执行目标方法之前，会执行与代理对象绑定的InvocationHandler的invoke方法。
JdkDynamicAopProxy本身就实现了InvocationHandler接口
final class JdkDynamicAopProxy implements AopProxy, InvocationHandler, Serializable
JdkDynamicAopProxy有一个重要的属性
private final AdvisedSupport advised;
最关键的就是这个AdvisedSupport advised属性，它包含了我们在xml中配置的拦截信息，同时还包含了这个JdkDynamicAopProxy要代理的接口及其实现类，对于本文来说就是XXService和XXServiceImpl。JdkDynamicAopProxy可以根据这些配置信息来创建一个代理对象实现拦截，同时又可以执行XXServiceImpl本身的业务方法。
AdvisedSupport有三个重要的内容：
TargetSource是目标类型和目标对象的包裹，在这里是XXServiceImpl类和XXServiceImpl对象。
List<Class<?>> interfaces：包含了目标类型实现的接口，在这里就是目标对象XXService
List<Advisor> advisors：这里包含了我们在xml文件中配置的所有信息。这一部分是每个AdvisedSupport所共享的信息，而前面两个是每个AdvisedSupport所独有的信息。
回到JdkDynamicAopProxy，来看看拦截过程，即调用代理对象的方法，然后被拦截到代理对象的InvocationHandler的invoke方法，JdkDynamicAopProxy的invoke方法如下：
public Object invoke(Object proxy, Method method, Object[] args) throws Throwable { MethodInvocation invocation; Object oldProxy = null; boolean setProxyContext = false; TargetSource targetSource = this.advised.targetSource; Class<?> targetClass = null; Object target = null; try { if (!this.equalsDefined && AopUtils.isEqualsMethod(method)) { // The target does not implement the equals(Object) method itself. return equals(args[0]); } if (!this.hashCodeDefined && AopUtils.isHashCodeMethod(method)) { // The target does not implement the hashCode() method itself. return hashCode(); } if (!this.advised.opaque && method.getDeclaringClass().isInterface() && method.getDeclaringClass().isAssignableFrom(Advised.class)) { // Service invocations on ProxyConfig with the proxy config... return AopUtils.invokeJoinpointUsingReflection(this.advised, method, args); } Object retVal; //关注的重点1： if (this.advised.exposeProxy) { // Make invocation available if necessary. oldProxy = AopContext.setCurrentProxy(proxy); setProxyContext = true; } // May be null. Get as late as possible to minimize the time we "own" the target, // in case it comes from a pool. target = targetSource.getTarget(); if (target != null) { targetClass = target.getClass(); } // Get the interception chain for this method.
//关注的重点2
List<Object> chain = this.advised.getInterceptorsAndDynamicInterceptionAdvice(method, targetClass); // Check whether we have any advice. If we don't, we can fallback on direct // reflective invocation of the target, and avoid creating a MethodInvocation. if (chain.isEmpty()) { // We can skip creating a MethodInvocation: just invoke the target directly // Note that the final invoker must be an InvokerInterceptor so we know it does // 关注重点3： retVal = AopUtils.invokeJoinpointUsingReflection(target, method, args); } else { // 关注的重点4 invocation = new ReflectiveMethodInvocation(proxy, target, method, args, targetClass, chain); // 关注的重点5 retVal = invocation.proceed(); } // Massage return value if necessary. Class<?> returnType = method.getReturnType(); if (retVal != null && retVal == target && returnType.isInstance(proxy) && !RawTargetAccess.class.isAssignableFrom(method.getDeclaringClass())) { retVal = proxy; } else if (retVal == null && returnType != Void.TYPE && returnType.isPrimitive()) { throw new AopInvocationException( "Null return value from advice does not match primitive return type for: " + method); } return retVal; } finally { if (target != null && !targetSource.isStatic()) { // Must have come from TargetSource. targetSource.releaseTarget(target); } if (setProxyContext) { // Restore old proxy. AopContext.setCurrentProxy(oldProxy); } } }
关注的重点1：this.advised.exposeProxy即我们在xml文件中所配置的<aop:config expose-proxy="false">。如果配置为true，默认false,则意味着在该线程内将会暴露proxy代理对象，实现共享，即在该线程中的任何地方都可以都可以取到proxy代理对象。具体是由ThreadLocal设计模式来实现的
关注的重点2：根据我们的目标类和方法找到对应的拦截器链 List<Object> chain = this.advised.getInterceptorsAndDynamicInterceptionAdvice(method, targetClass); 它内部是通过advised的一个this.advisorChainFactory来实现这一过程，advisorChainFactory默认为DefaultAdvisorChainFactory，实现过程如下：
public List<Object> getInterceptorsAndDynamicInterceptionAdvice(Method method, Class<?> targetClass) { MethodCacheKey cacheKey = new MethodCacheKey(method); List<Object> cached = this.methodCache.get(cacheKey); if (cached == null) { cached = this.advisorChainFactory.getInterceptorsAndDynamicInterceptionAdvice( this, method, targetClass); this.methodCache.put(cacheKey, cached); } return cached; }
public List<Object> getInterceptorsAndDynamicInterceptionAdvice( Advised config, Method method, Class<?> targetClass) { // This is somewhat tricky... We have to process introductions first, // but we need to preserve order in the ultimate list. List<Object> interceptorList = new ArrayList<Object>(config.getAdvisors().length); Class<?> actualClass = (targetClass != null ? targetClass : method.getDeclaringClass()); boolean hasIntroductions = hasMatchingIntroductions(config, actualClass); AdvisorAdapterRegistry registry = GlobalAdvisorAdapterRegistry.getInstance(); for (Advisor advisor : config.getAdvisors()) { if (advisor instanceof PointcutAdvisor) { // Add it conditionally. PointcutAdvisor pointcutAdvisor = (PointcutAdvisor) advisor; if (config.isPreFiltered() || pointcutAdvisor.getPointcut().getClassFilter().matches(actualClass)) { MethodInterceptor[] interceptors = registry.getInterceptors(advisor); MethodMatcher mm = pointcutAdvisor.getPointcut().getMethodMatcher(); if (MethodMatchers.matches(mm, method, actualClass, hasIntroductions)) { if (mm.isRuntime()) { // Creating a new object instance in the getInterceptors() method // isn't a problem as we normally cache created chains. for (MethodInterceptor interceptor : interceptors) { interceptorList.add(new InterceptorAndDynamicMethodMatcher(interceptor, mm)); } } else { interceptorList.addAll(Arrays.asList(interceptors)); } } } } else if (advisor instanceof IntroductionAdvisor) { IntroductionAdvisor ia = (IntroductionAdvisor) advisor; if (config.isPreFiltered() || ia.getClassFilter().matches(actualClass)) { Interceptor[] interceptors = registry.getInterceptors(advisor); interceptorList.addAll(Arrays.asList(interceptors)); } } else { Interceptor[] interceptors = registry.getInterceptors(advisor); interceptorList.addAll(Arrays.asList(interceptors)); } } return interceptorList; }
上述过程分了三种情况来获取对应的Interceptor拦截器，config.getAdvisors()是我们在xml文件中所配置的所有的拦截情况，对于这些所有的拦截情况：
当Advisor为PointcutAdvisor类型的时：
这是我们本工程的配置的拦截，每个拦截都有pointcut，针对这种情况，首先判断该PointcutAdvisor的ClassFilter是否拦截了targetClass，若拦截则需继续判断PointcutAdvisor的MethodMatcher是否拦截targetClass的method方法。如果也拦截了，就需要将PointcutAdvisor的adice添加进去，则继续判断这个PointcutAdvisor的MethodMatcher是否是动态变化的，若是则需要将interceptor进一步包装成InterceptorAndDynamicMethodMatcher然后添加进去。
当Advisor为IntroductionAdvisor类型的时候：
IntroductionAdvisor应用在类上，不需要判断是否拦截了相应的方法。IntroductionAdvisor只有一个ClassFilter。此时仅仅去判断下是否拦截相应的类即可。
其他情况:
直接获取相应的interceptor。
我们来看下根据Advisor来获取对应的MethodInterceptor方法：
public MethodInterceptor[] getInterceptors(Advisor advisor) throws UnknownAdviceTypeException { List<MethodInterceptor> interceptors = new ArrayList<MethodInterceptor>(3); Advice advice = advisor.getAdvice(); if (advice instanceof MethodInterceptor) { interceptors.add((MethodInterceptor) advice); } for (AdvisorAdapter adapter : this.adapters) { if (adapter.supportsAdvice(advice)) { interceptors.add(adapter.getInterceptor(advisor)); } } if (interceptors.isEmpty()) { throw new UnknownAdviceTypeException(advisor.getAdvice()); } return interceptors.toArray(new MethodInterceptor[interceptors.size()]); }
首先是判断advisor.getAdvice()是否已实现了MethodInterceptor，如AspectJAfterAdvice、AspectJAfterThrowingAdvice等。 然后又是利用适配器模式，将不用的advice封装成对应的MethodInterceptor。如MethodBeforeAdviceAdapter，默认硬编码注册了三个
public DefaultAdvisorAdapterRegistry() { registerAdvisorAdapter(new MethodBeforeAdviceAdapter()); registerAdvisorAdapter(new AfterReturningAdviceAdapter()); registerAdvisorAdapter(new ThrowsAdviceAdapter()); }
看下MethodBeforeAdviceAdapter：
class MethodBeforeAdviceAdapter implements AdvisorAdapter, Serializable { @Override public boolean supportsAdvice(Advice advice) { return (advice instanceof MethodBeforeAdvice); } @Override public MethodInterceptor getInterceptor(Advisor advisor) { MethodBeforeAdvice advice = (MethodBeforeAdvice) advisor.getAdvice(); return new MethodBeforeAdviceInterceptor(advice); } }
这就是典型的适配器模式，当Advice为MethodBeforeAdvice时，就会封装成MethodBeforeAdviceInterceptor。 至此获取MethodInterceptor链的过程就完成了，回到List<Object> chain = this.advised.getInterceptorsAndDynamicInterceptionAdvice(method, targetClass);即List<Object>是一系列的MethodInterceptor构成的。
关注重点3：在获取MethodInterceptor链后，如果为空，则没有拦截器直接执行目标对象的方法。retVal = AopUtils.invokeJoinpointUsingReflection(target, method, args);中的target对于本工程来说就是XXServiceImpl，所以此方法的本质就是利用反射执行XXServiceImpl的method方法。如下：
public static Object invokeJoinpointUsingReflection(Object target, Method method, Object[] args) throws Throwable { // Use reflection to invoke the method. try { ReflectionUtils.makeAccessible(method); return method.invoke(target, args); } catch (InvocationTargetException ex) { // Invoked method threw a checked exception. // We must rethrow it. The client won't see the interceptor. throw ex.getTargetException(); } catch (IllegalArgumentException ex) { throw new AopInvocationException("AOP configuration seems to be invalid: tried calling method [" + method + "] on target [" + target + "]", ex); } catch (IllegalAccessException ex) { throw new AopInvocationException("Could not access method [" + method + "]", ex); } }
关注的重点4： 有了拦截器链后，就构造一个ReflectiveMethodInvocation来完成这一个调用过程
首先说下接口情况：ReflectiveMethodInvocation实现了ProxyMethodInvocation，ProxyMethodInvocation继承了MethodInvocation， MethodInvocation继承了Invocation， Invocation继承了Joinpoint，此时的Joinpoint是AOP联盟定义的接口。
关注的重点5：然后看下ReflectiveMethodInvocation作为一个Joinpoint的proceed方法的执行过程：
public Object proceed() throws Throwable { // We start with an index of -1 and increment early. if (this.currentInterceptorIndex == this.interceptorsAndDynamicMethodMatchers.size() - 1) { return invokeJoinpoint(); } Object interceptorOrInterceptionAdvice = this.interceptorsAndDynamicMethodMatchers.get(++this.currentInterceptorIndex); if (interceptorOrInterceptionAdvice instanceof InterceptorAndDynamicMethodMatcher) { // Evaluate dynamic method matcher here: static part will already have // been evaluated and found to match. InterceptorAndDynamicMethodMatcher dm = (InterceptorAndDynamicMethodMatcher) interceptorOrInterceptionAdvice; if (dm.methodMatcher.matches(this.method, this.targetClass, this.arguments)) { return dm.interceptor.invoke(this); } else { // Dynamic matching failed. // Skip this interceptor and invoke the next in the chain. return proceed(); } } else { // It's an interceptor, so we just invoke it: The pointcut will have // been evaluated statically before this object was constructed. return ((MethodInterceptor) interceptorOrInterceptionAdvice).invoke(this); } }
首先就是this.currentInterceptorIndex,它是ReflectiveMethodInvocation的一个属性，从-1开始：当currentInterceptorIndex达到this.interceptorsAndDynamicMethodMatchers.size() - 1时，拦截器链执行完毕了，就去执行目标对象的方法。invokeJoinpoint（）方法就是上文我们所说的通过反射进行目标方法的调用。
继续看，拿出一个interceptorOrInterceptionAdvice，判断它是不是InterceptorAndDynamicMethodMatcher类型，这个类型在获取拦截器链的时候遇见了，我们再次回顾下：
for (Advisor advisor : config.getAdvisors()) { if (advisor instanceof PointcutAdvisor) { // Add it conditionally. PointcutAdvisor pointcutAdvisor = (PointcutAdvisor) advisor; if (config.isPreFiltered() || pointcutAdvisor.getPointcut().getClassFilter().matches(targetClass)) { MethodInterceptor[] interceptors = registry.getInterceptors(advisor); MethodMatcher mm = pointcutAdvisor.getPointcut().getMethodMatcher(); //重点在这里重点在这里重点在这里重点在这里重点在这里 if (MethodMatchers.matches(mm, method, targetClass, hasIntroductions)) { if (mm.isRuntime()) { // Creating a new object instance in the getInterceptors() method // isn't a problem as we normally cache created chains. for (MethodInterceptor interceptor : interceptors) { interceptorList.add(new InterceptorAndDynamicMethodMatcher(interceptor, mm)); } } else { interceptorList.addAll(Arrays.asList(interceptors)); } } } } //略
因为InterceptorAndDynamicMethodMatcher的MethodMatcher是可变的，所以在执行前仍要进行判断一次，符合的话就执行InterceptorAndDynamicMethodMatcher中所包含的MethodInterceptor。不符合的话跳过本次拦截器，继续执行下一个拦截器。 当拦截器是MethodInterceptor，则是执行这个拦截器。 然后我们来看下具体有哪些拦截器链，以及具体是怎样的执行过程：
我们会看到会有如下5个拦截器，依次是： ExposeInvocationInterceptor、MethodBeforeAdviceInterceptor、AspectJAfterAdvice、AspectJAroundAdvice、AspectJAfterThrowingAdvice。
即先执行后面的拦截器，但后面的拦截器执行过程中出现异常时才会发挥该拦截器的作用。继续执行后面的拦截器，发现已经没了，则终于轮到目标对象的方法了，目标方法执行完毕后，返回上一个proceed的嵌套即AspectJAfterThrowingAdvice的invoke方法，发现没有抛出异常，则继续返回到上一个proceed嵌套，即AspectJAroundAdvice，即我们自定义的doAround中这一行代码Object retVal = pjp.proceed()返回了，继续完成我们自定义的doAround函数，完成后再返回上一个proceed嵌套，来到AspectJAfterAdvice，则开始执行这个advice的处理工作，即我们自定义的doAfter方法。再返回上一个proceed嵌套，来到MethodBeforeAdviceInterceptor，发现已经执行完毕继续返回上一个嵌套来到ExposeInvocationInterceptor，继续完成余下的工作，至此整个拦截过程就分析完毕了。在此过程中一个重要的参数就是我们配置的拦截器的顺序，顺序不同时执行过程就不一样，我们可以通过在xml配置中指定,下面附上我画的拦截器链的执行流程图。
